Scribd
Upload
409 views1 page

ASTM A500 Steel, Grade B, Shaped Structural Tubing

ASTM A500 Steel, grade B, is a low carbon structural tubing with a minimum copper content of 0.18%. It has mechanical properties including a tensile strength of 400 MPa and a yield strength of 315 MPa, along with a density of 7.80 g/cc. The material composition includes 99% iron and specific limits for carbon, phosphorus, and sulfur.

Uploaded by

Ammar Sandhu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
409 views1 page

ASTM A500 Steel, Grade B, Shaped Structural Tubing

ASTM A500 Steel, grade B, is a low carbon structural tubing with a minimum copper content of 0.18%. It has mechanical properties including a tensile strength of 400 MPa and a yield strength of 315 MPa, along with a density of 7.80 g/cc. The material composition includes 99% iron and specific limits for carbon, phosphorus, and sulfur.

Uploaded by

Ammar Sandhu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

ASTM A500 Steel, grade B, shaped structural tubing

Categories: Metal; Ferrous Metal; ASTM Steel; Carbon Steel; Low Carbon Steel

Material The Cu content of 0.18% is a minimum content when copper steel is specified.
Notes:
Key Words: copper steels, copper-steels, UNS K03000, ASTM A501
Vendors: No vendors are listed for this material. Please click here if you are a supplier and would like information on how to add your listing to this
material.

Physical Properties Metric English Comments


Density 7.80 g/cc 0.282 lb/in³ Typical of ASTM Steel

Mechanical Properties Metric English Comments


Tensile Strength, Ultimate 400 MPa 58000 psi
Tensile Strength, Yield 315 MPa 45700 psi
Elongation at Break 23 % 23 %
Bulk Modulus 160 GPa 23200 ksi Typical for steel
Shear Modulus 80.0 GPa 11600 ksi Typical for steel

Component Elements Properties Metric English Comments


Carbon, C <= 0.30 % <= 0.30 %
Copper, Cu <= 0.18 % <= 0.18 %
Iron, Fe 99 % 99 %
Phosphorus, P <= 0.050 % <= 0.050 %
Sulfur, S <= 0.063 % <= 0.063 %

References for this datasheet.

Some of the values displayed above may have been converted from their original units and/or rounded in order to display the information in a consistent format. Users requiring more precise data for scientific or
engineering calculations can click on the property value to see the original value as well as raw conversions to equivalent units. We advise that you only use the original value or one of its raw conversions in your
calculations to minimize rounding error. We also ask that you refer to MatWeb's terms of use regarding this information. Click here to view all the property values for this datasheet as they were originally entered
into MatWeb.

You might also like