Product Data Sheet
September 2014
Ed 04
LevelDatic™ 80S
Multipoint Transmitter
LevelDatic™ 80S September 2014
Product Description Benefits
LevelDatic 80S collects and measures level or draught data
™
Accurate and robust measurement in all types of tanks
from hydrostatic pressure using electro-pneumatic technology.
No electronics in hazardous area, easy exchange of spare
Two main methods are used to measure hydrostatic pressure: parts
Bubbling air fed to tank — used where bubbling air can be fed Air flow volume controller with visual monitoring and built in
into the tanks, such as ballast, diesel oil, heavy fuel oil tanks quick test connector
and draught measurement.
The electro-pneumatic LevelDatic™ 80S system provides reliable
Pneumatic 1:1 pressure converter — used where air fed into and accurate continuous on-line information on actual tank
the tanks is prohibited, such as in drinking water tanks and levels, possible water ingress and ship’s draft. Every tank, hold/
tanks with liquid flash point less than 60º C. void space and draft measurement has its own dedicated sensor.
10 electro-pneumatic channels can be connected to each All electronics are located in cabinets placed within a safe area.
cabinet and additional cabinets can be added to fit the vessel’s There are no sensors, electrical cables or moving parts in the
requirement. A unique feature is the constant flow speed tanks that can be damaged, and that require tank entry for
controller allowing adjusting and monitoring of air flow and fast replacement.
access for testing and purging. Another useful feature is that
each channel has a built in non-return valve in the pneumatic
block located in the cabinet.
Dimensions Other Applications
LevelDatic™ WIM is designed for monitoring and detection of
water ingress in cargo holds, empty ballast tanks and voids. The
system includes alarm panel with all the required alarms and
also shows actual level of water.
Decision Support Flooding Control (DFC) is a solution developed
in cooperation with Onboard Napa Oy. This solution uses online
information integrated with an intelligent 3D calculation tool for
the best reliable decision support in case of flooding .
For more information please contact Emerson Process
Management.
2 www.EmersonProcess.com
September 2014 LevelDatic™ 80S
Technical Specification
Cabinet
Measuring point capacity 1 to 10 electro-pneumatic measuring points
For each measuring point −− capacitive gauge pressure sensor
−− overpressure capacity of 8 bar
−− constant air flow speed controller and indicator, continuous air flow in
measuring lines
−− purge and test possibility
−− built-in non-return valve and shut off valve
For each cabinet −− shut off valve for air supply and every measuring line
−− pressure reducing valve with manometer and low pressure alarm switch
−− connection board with test and sensor protection components and alarm
connection
Standard interface 2-wire 4 to 20 mA signal from each measuring point
System capacity Unlimited
Measuring range 0 - 35 m
Sensor range 0.2 / 0.5 / 1 / 2 / 3 / 4 bar
Sensor Conformity Maximum ±0.2 % F.S. (sum of linearity error, hysteresis and repeatability)
Power supply and consumption Loop powered (option: 230/115 VAC, 50-60 Hz), maximum 16W
Air supply 5 to 8 bar dry and clean instrument air
Air consumption / measuring point −− empty tank 0.5 lit / min free air; 0.07 lit / min (7 bar)
−− 10 m 0.85 lit / min free air; 0.12 lit / min (7 bar)
−− 20 m 1.2 lit / min free air; 0.17 lit / min (7 bar)
−− 30 m 1.4 lit / min free air; 0.20 lit / min (7 bar)
Installation area Safe area
Type approvals DNV, BV, LR, ABS and CCS
Operating temperature +5 to +70º C
Storage temperature -25 to +70º C
Humidity No condensation
Weight ~25 kg
Housing
Housing material Epoxy powder painted steel
Standard colour RAL 7032
Sealing IP56
www.EmersonProcess.com 3
LevelDatic™ 80S Product Data Sheet
Ed 04 September 2014
©2014 Emerson Process Management. All rights reserved.
The Emerson logo is a trademark and service mark of Emerson Electric Co. Rosemount and the
Rosemount logotype are registered trademarks of Rosemount Inc. TankRadar, LevelDatic and
MAS 2600 are trademarks of Rosemount Tank Radar AB. Rosemount Tank Radar AB is a member
of the Emerson Process Management family of companies. All other marks are the property of
their respective owners.
Emerson Process Management
Rosemount Tank Radar AB The contents of this publication are presented for information purposes only, and while effort has
Box 13045 been made to ensure their accuracy, they are not to be construed as warranties or guarantees,
SE-40251 Sweden express or implied, regarding the products or services described herein or their use or
T +46 31 337 00 00 applicability. All sales are governed by our terms and conditions, which are available on request.
F +46 31 25 30 22 We reserve the right to modify or improve the designs or specifications of our products at any
www.EmersonProcesss.com/mtm time without notice.
