Actiflo Pack - High Rate Clarifier
APPLICATION
Fenian FENG
Technical & Product Manager
Standard Product, Veolia APAC
For Distributors, 2020
Agenda
HOW TO SELL ACTIFLO PACK
01 02
Applications Case Studies
Expected Performance
03 04 05
Benefits Sales Q&A
Arguments
MUNICIPAL
DRINKING WATER TREATMENT
STORM WATER TREATMENT
PRIMARY TREATMENT IN SEWAGE WASTEWATER TREATMENT PLANT
BACKWASH THICKENING (FILTER, BIOFILTER)
ACTIFLO ALGAE REMOVAL
APPLICATIONS INDUSTRIAL
PRIMARY TREATMENT (INTAKE WATER TREATMENT)
SECONDARY TREATMENT (MBBR EFFLUENT)
Actiflo is suitable for TERTIARY TREATMENT (PHOSPHATE REMOVAL)
applications, such as:
TERTIARY TREATMENT (HARD COD REMOVAL WITH CARBON)
HEAVY METAL REMOVAL
SOFTENING
2019 STANDARD PRODUCT TRAINING - SEA
3
MUNICIPAL
DRINKING WATER TREATMENT
Application Targets of pretreatment step:
- Surface water or groundwater can be water source
- Coagulation/Flocculation is an effective solution for
Turbidity & color removal
- It’s typically applied before filtration
- Pretreated effluent will have an impact on the stability
of filtration system
- Capacity can be varied from few to hundreds MLD
Reasons to propose Actiflo Pack:
- Extremely compact system
- Complied with French certificate of health compliance:
ACS standard
- High treatment efficiency
Source: Veolia Product - Quick treatment performance recovery
- ideal for auto operation with frequent stops and restarts
- effective in treating low temp / turbidity water
2019 STANDARD PRODUCT TRAINING - SEA - Proven technology 4
MUNICIPAL
DRINKING WATER TREATMENT
PROCESS DATA
Parameters Unit Value
m3/hr 40 - 850
Capacity
(per Unit)
MLD 1.0 - 20.5
SS in mg/L up to 500
SS out mg/L 5
Sludge concentration % 0.1 - 2
Normanton Water Treatment Plant Municipal AUS
2019 STANDARD PRODUCT TRAINING - SEA
5
MUNICIPAL
DRINKING WATER TREATMENT
CASE STUDY
2019 STANDARD PRODUCT TRAINING - SEA
6
MUNICIPAL
DRINKING WATER TREATMENT
CASE STUDY
Client Needs
- Drinking water for shower rooms
- Capacity: 1900 m3/d
- Model: 1 x APW-2 SS
- Package supplied by VWS Memsep, at 2008
- Downstream: sand filter
- Won due to Flexibility, reliability and small
- footprint of the Actiflo® Pack technology
Parameters Unit Value
SS in mg/L up to 500
The End Client:
SS out mg/L 5
Unipetrol - Orlen Group, Czech Republic (Litvinov)
2019 STANDARD PRODUCT TRAINING - SEA
7
MUNICIPAL
DRINKING WATER TREATMENT
CASE STUDY
Client Needs
- Drinking water for the food & beverage Kerry-Apt-Union
industry (fruit ingredients)
- Capacity: 2700 m3/d
- Model: 1 x APW-3
- Package supplied by VWS Memsep, at 2009
- Raw water: Raw water from Durance river
- Won due to Flexibility, reliability and small footprint of
the Actiflo® Pack technology
Parameters Unit Value
avg. 60
Inlet Turbidity NTU
Peak 1000
SS out mg/L 5 The End Client:
Kerry-Apt-Union industry, France
2019 STANDARD PRODUCT TRAINING - SEA
8
MUNICIPAL
STORM WATER TREATMENT
APPLICATION Storm water
- Stormwater is a major cause of urban flooding
- Litter or silt that enters the drains or rivers will pollute
the waters and
- May block the flow of stormwater in waterways
- High load of contaminants might decrease the facility
efficiency of drinking water system located next to the
river
- High variations of inlet conditions can be expected
Reasons to propose Actiflo Pack:
- Extremely compact system
- High treatment efficiency
- Quick treatment performance recovery
Source: Internet - ideal for auto operation with frequent stops and restarts
- effective in treating low temp / turbidity water
2019 STANDARD PRODUCT TRAINING - SEA
9
MUNICIPAL
STORM WATER TREATMENT
PROCESS DATA
Parameters Unit Value
m3/hr 40 - 850
Capacity
(per Unit)
MLD 1.0 - 20.5
SS in mg/L up to 500
SS removal % 90
Sludge concentration % 0.1 - 2
Source: Veolia Product
2019 STANDARD PRODUCT TRAINING - SEA
10
MUNICIPAL
STORM WATER TREATMENT
CASE STUDY
Client Needs
- Stormwater treatment application
- Compact system requried
- Capacity: 320MLD
- Plant built in 2006
Parameters Unit Value
SS in mg/L up to 1500
SS out mg/L 50
The End Client:
Illawarra, Sydney, Australie
2019 STANDARD PRODUCT TRAINING - SEA
11
MUNICIPAL - INDUSTRIAL
PRIMARY TREATMENT
Sewage Wastewater
APPLICATION - Sewage is generated in residential, commercial and
industrial area
- It includes household waste liquid from toilets, baths,
showers, and kitchens draining into sewers
- In many areas, sewage also includes liquid waste from
industry and commerce.
- Transferring thru long distance pipelines, the main
pollutants are: heavy particles, Oil & Grease which
needs to be removed before feeding into secondary
biological system to avoid the sedimentation in
downstreams.
- Normally quite big capacity for Municipal plants, and
industrial plan could be smaller
Reasons to propose Actiflo Pack:
Source: Internet
- Extremely compact system
- Tolerate high inlet loading fluctuation
- Effective in treating low temp water
2019 STANDARD PRODUCT TRAINING - SEA
12
- High treatment efficiency
MUNICIPAL - INDUSTRIAL
PRIMARY TREATMENT IN SEWAGE TREATMENT PLANT
PROCESS DATA
Parameters Unit Value
m3/hr 40 - 850
Capacity
(per Unit)
MLD 1.0 - 20.5
SS in mg/L up to 500
SS out mg/L 50 - 100
Sludge concentration % 0.1 - 2
Source: Veolia Project
2019 STANDARD PRODUCT TRAINING - SEA
13
MUNICIPAL - INDUSTRIAL
PRIMARY TREATMENT IN SEWAGE TREATMENT PLANT
CASE STUDY
Client Needs
- Compact design required due to very limited space
- High treatment efficiency to meet with strict
regulations
- 3 in 1: primary treatment, storm flow treatment (wet
weather) and biofilter backwash water treatment
(Biostyr®)
- Plant capacity: 520MLD
Parameters Unit Value
SS in mg/L up to 1500
The End Client:
SS out mg/L 50
Aïre wastewater treatment plant, Geneva, Switzerland
2019 STANDARD PRODUCT TRAINING - SEA
14
MUNICIPAL - INDUSTRIAL
PRIMARY TREATMENT IN SEWAGE TREATMENT PLANT
CASE STUDY
Client Needs
- Sewage primary treatment
- Capacity: 80m3/hr
- Model: 1 x APWW-1
- Package supplied by VWS Iberica, at 2007
- Won due to Flexibility, reliability and small footprint
of the Actiflo® Pack technology
Parameters Unit Value
SS in mg/L 100 -260
The End Client:
SS out mg/L > 80%
EDAR Gran Canaria (Sureste)
2019 STANDARD PRODUCT TRAINING - SEA
15
MUNICIPAL - INDUSTRIAL
PRIMARY TREATMENT IN SEWAGE TREATMENT PLANT
CASE STUDY
Client Needs
- 3 000 m3/d intake water from the Massawippi River.
- High variations of the raw water quality required
frequent backwashing of the sand filters, thus causing
production drawbacks.
- Actiflo Pack was proposed due to the benefits of:•
Process compactness, Treatment stability, Operation
simplicity, Minimum construction costs.
Parameters Unit Value
Turbidity in NTU 5.8 - 250
The End Client:
Turbidity out NTU 0.2 - 4.7
Scott Paper Ltd.,Lennoxville, QC
2019 STANDARD PRODUCT TRAINING - SEA
16
INDUSTRIAL
PRIMARY WASTEWATER TREATMENT
CASE STUDY
Client Needs
- MicroE industry, for TSS and Silicon removal
- Compact design required due to very limited space,
for indoor installation
- High treatment efficiency to meet with strict
regulations
- Plant built at 2006, then Ph2, Ph3 followed
- Capacity: 40m3/hr
CODCr BOD5 TSS
Actiflo Influent - - 500
Actiflo Effluent - - <20
The End Client:
Samsung Plant, Suzhou, China
2019 STANDARD PRODUCT TRAINING - SEA
17
INDUSTRIAL
PRIMARY WASTEWATER TREATMENT
CASE STUDY
Client Needs
- Industry : Semiconductor – Silicon wafer manufacture
- Equipment : Actiflo + Hydrotech Discfilter (Actidisk), MF, RO
- Application : High TSS water from silicon cutting & polishing
process
- Capacity: 60m3/hr
- Goal : SDI15 < 3; Turbidity < 1 NTU
- Client Requirements:
- Packaged Solution with extremely small footprint (no space
available at existing WW treatment plant)
- Treat high TSS, “Stop & Go” operation, quick on-line treatment
- Fully automatic, user friendly with little or no operator input
The End Client:
LG Siltron P3, Gumi, S. Korea
2019 STANDARD PRODUCT TRAINING - SEA
18
INDUSTRIAL
PRIMARY WASTEWATER TREATMENT
CASE STUDY
The End Client:
LG Siltron P3, Gumi, S. Korea
2019 STANDARD PRODUCT TRAINING - SEA
19
MUNICIPAL
ALGAE REMOVAL
Algae:
APPLICATION
- 'algae' is a broad term including organisms of widely varying sizes,
growth rates, and nutrient requirements
- Freshwater algal blooms are the result of an excess of nutrients,
particularly some phosphates (>0.1ppm)
- Algae tend to grow very quickly under high nutrient availability, but
each alga is short-lived, and the result is a high concentration of
dead organic matter which starts to decay.
- The decay process consumes dissolved oxygen in the water,
resulting in hypoxic conditions. Without sufficient dissolved
oxygen in the water, animals and plants may die off in large
numbers.
- During the summer months, effluent can be highly loaded with
algae;
Reasons to propose Actiflo Pack:
- Extremely compact system
- As good as DAF performance for Algae removal
Source: Internet
- Proven technology
2019 STANDARD PRODUCT TRAINING - SEA
20
MUNICIPAL
ALGAE REMOVAL
PROCESS DATA
Parameters Unit Value
m3/hr 40 - 850
Capacity
(per Unit)
MLD 1.0 - 20.5
SS in mg/L up to 500
SS out mg/L 50
Sludge concentration % 0.1 - 2
Source: Veolia Project
2019 STANDARD PRODUCT TRAINING - SEA
21
MUNICIPAL
ALGAE REMOVAL
CASE STUDY
2019 STANDARD PRODUCT TRAINING - SEA
22
Source: Veolia Pilot Test
MUNICIPAL
ALGAE REMOVAL
CASE STUDY
2019 STANDARD PRODUCT TRAINING - SEA
23
Source: Veolia Pilot Test
MUNICIPAL - INDUSTRIAL
SECONDARY TREATMENT (MBBR EFFLUENT)
APPLICATION
MBBR Effluent:
- Typically low TSS effluent thanks to MBBR biofilm
technology
- Fine, light biomass in MBBR effluent
- For proper separation, chemical dosing might be
required.
Reasons to propose Actiflo Pack:
- Extremely compact system
- Proven technology
- MBBR not requires biomass recirculation, no risk of
microsand accumulation.
Source: Veolia Product
2019 STANDARD PRODUCT TRAINING - SEA
24
MUNICIPAL - INDUSTRIAL
SECONDARY TREATMENT (MBBR EFFLUENT)
PROCESS DATA
Parameters Unit Value
m3/hr 40 - 850
Capacity
(per Unit)
MLD 1.0 - 20.5
SS in mg/L 300
SS out mg/L 20 - 50
Sludge concentration % 0.1 -2
Source: Veolia Product
2019 STANDARD PRODUCT TRAINING - SEA
25
INDUSTRIAL
TERTIARY TREATMENT (PHOSPHATE REMOVAL)
APPLICATION Phosphate precipitation:
- Chemical precipitation is an effective solution for TP
removal
- Low effluent TSS required
- Only active phosphate to be precipated
- Salt of Iron, Alum, or Calcium could react with
orthophosphate to form Phosphate precipitation
- Precipitation can be easily separated in Multiflo
Reasons to propose Multiflo Pack:
- Extremely compact system
- High treatment efficiency
- Quick treatment performance recovery
- ideal for auto operation with frequent stops and restarts
- effective in treating low temp / turbidity water
- Proven technology
2019 STANDARD PRODUCT TRAINING - SEA
26
INDUSTRIAL
TERTIARY TREATMENT (PHOSPHATE REMOVAL)
PROCESS DATA
Parameters Unit Value
m3/hr 40 - 850
Capacity
(per Unit)
MLD 1.0 - 20.5
SS in mg/L 50
SS out mg/L 10
TP out mg/L 0.3 - 1.0
Sludge concentration % 0.1 - 2.0 Source: Veolia Product
2019 STANDARD PRODUCT TRAINING - SEA
27
INDUSTRIAL
TERTIARY TREATMENT (HARD COD REMOVAL WITH CARBON)
APPLICATION
Refractory COD:
- Industrial effluent are often contaminated with refractory organic pollutants, having complex molecular structure,
and varying biodegradability.
- Refractory COD not be able to easily biodegraded.
- MultifloCarb with Powder Activated Carbon dosing is more effective in some cases
Reasons to propose Actiflo Pack:
- Extremely compact system
- High treatment efficiency
- Quick treatment performance recovery
- ideal for auto operation with frequent stops and restarts
- effective in treating low temp / turbidity water
- Proven technology
2019 STANDARD PRODUCT TRAINING - SEA
28
INDUSTRIAL
TERTIARY TREATMENT (HARD COD REMOVAL WITH CARBON)
PROCESS DATA
Parameters Unit Value
m3/hr 30 - 430
Capacity
(per Unit)
MLD 0.75 - 10
SS in mg/L 10
COD out mg/L Subject to Carbon dosage
Sludge concentration % 0.1 - 2.0
Source: Veolia Project - Huntsman Qingdao Project, China
2019 STANDARD PRODUCT TRAINING - SEA
29
INDUSTRIAL
TERTIARY TREATMENT (HARD COD REMOVAL WITH CARBON)
CASE STUDY
Client Needs
- Client name: Huntsman Textile Effects Qingdao
- High Soluble COD in secondary clarifier effluent in
existing WWTP, tCOD 800ppm having 790ppm
Soluble COD
- Discharge requires COD <200ppm, increased to
100ppm 2 yrs later after project executed;
- 1000m3/day capacity
- There are 3 Granular Activated Carbon filters in
operation, however clients gave up due to extremely
high OPEX. Yearly More than RMB 6Million for
Granular Activated Carbon replacement only!!!
- ActifloCarb was proposed to replace the existing
GAC filters, with lower OPEX.
The End Client:
- Project awarded due to small footprint, easy
Huntsman Qingdao, China
operation, high treatment performance, and low
OPEX.
2019 STANDARD PRODUCT TRAINING - SEA
30
INDUSTRIAL
TERTIARY TREATMENT (HARD COD REMOVAL WITH CARBON)
CASE STUDY
System performance:
- 1x AFP2 (APWW2)
Parameters Unit Value
COD in mg/L 800
COD out mg/L <100
PAC dosage kg/hr 60-90
The End Client:
Huntsman Qingdao, China
2019 STANDARD PRODUCT TRAINING - SEA
31
INDUSTRIAL
HEAVY METAL REMOVAL
APPLICATION
heavy metal precipitation:
- Follow conventional metals precipitation chemistry -
raise pH with lime or caustic
- Sulfide addition may be necessary
- Separate reaction tank
-
Reasons to propose Actiflo Pack:
- Extremely compact system
- High treatment efficiency
- Quick treatment performance recovery
- ideal for auto operation with frequent stops and restarts
- effective in treating low temp / turbidity water
- Proven technology
2019 STANDARD PRODUCT TRAINING - SEA
32
INDUSTRIAL
HEAVY METAL REMOVAL
PROCESS DATA
Parameters Unit Value
m3/hr 40 - 850
Capacity
(per Unit)
MLD 1.0 - 20.5
SS in mg/L 50
SS out mg/L 10
Sludge concentration % 0.1 - 2.0
2019 STANDARD PRODUCT TRAINING - SEA
33
INDUSTRIAL
HEAVY METAL REMOVAL
CASE STUDY
Client Needs
- Gold mining
- High As, TSS, COD and Heavy Metals
- Wastewater treatment for re-use
- Supplied 3x APWW 3, by VWS Envig at 2009
- Capacity: 7680m3/day
CODCr TSS As TDS
Actiflo Influent 540 76.5 5.6 4820
Actiflo Effluent WHO & CHIR standard
The End Client:
Anglo Gold Ashanti Ghana (Obuasi)
2019 STANDARD PRODUCT TRAINING - SEA
34
INDUSTRIAL
HEAVY METAL REMOVAL
CASE STUDY
Client Needs
- Raw Water Characteristics:
- Process Water Flow: 2,300 – 5,700 m3/h
- With Stormwater Runoff Flow: Up to 34,000 m3/h
- pH: 1.5 – 5.0
- TSS: 200 – 2,500 mg/l
- O&G: 20 – 190 mg/l
- Total Cu: 0 – 140 µg/l
- Total Ni: 0 – 140 µg/l
- Total Zn: 0 – 5 mg/l
-
- Treated Water Requirements:
- pH: 6–9
- TSS: < 17 mg/l Monthly Average & < 43 mg/l Daily Average
The End Client:
- O&G: < 5 mg/l Monthly Average & < 12 mg/l Daily Average
International Steel Group (ISG), USA
- Total Cu: < 6.1 µg/l
- Total Ni: < 20 µg/l
-
2019 STANDARD PRODUCT TRAINING - SEA
35
INDUSTRIAL
HEAVY METAL REMOVAL
CASE STUDY
The End Client:
Mirror speed: 150 m/hr Mirror speed: 180 m/hr
International Steel Group (ISG), USA
2019 STANDARD PRODUCT TRAINING - SEA
36
INDUSTRIAL
SOFTENING
Softening:
APPLICATION - Water softening is the removal of calcium, magnesium,
and certain other metal cations in hard water.
- Hard water leads to the buildup of limescale, which can
foul plumbing, and promote galvanic corrosion.
- In industrial scale water softening plants, the effluent
flow from the re-generation process can precipitate
scale that can interfere with sewage systems.
- Lime softening is an effective solution to remove
hardness.
Reasons to propose Actiflo Pack:
- Extremely compact system
- High treatment efficiency
- Quick treatment performance recovery
Source: Internet - ideal for auto operation with frequent stops and restarts
- effective in treating low temp / turbidity water
- Proven technology
2019 STANDARD PRODUCT TRAINING - SEA
37
INDUSTRIAL
SOFTENING
PROCESS DATA
Parameters Unit Value
m3/hr 40 - 850
Capacity
(per Unit)
MLD 1.0 - 20.5
SS in mg/L 50
SS out mg/L 10
Sludge concentration % 0.1 - 2.0
Source: Veolia Product
2019 STANDARD PRODUCT TRAINING - SEA
38
ACTIFLO APPLICATIONS
2019 STANDARD PRODUCT TRAINING - SEA
39
CONCLUSION
ACTIFLO IS SUITABLE
MUNICIPAL APPLICATIONS INDUSTRIAL APPLICATIONS ALGAE REMOVAL
CONCLUSION
ACTIFLO IS PROPOSED, BECAUSE OF:
EXTREMELY SMALL QUICK TREATMENT EFFECTIVE IN TREATMENT OF
FOOTPRINT PERFORMANCE RECOVERY LOW TEMP/TURBIDITY WATER
HIGH TREATMENT FREQUENT STOPS AND
ROBUST
PERFORMANCE RESTARTS
PRE-ASSEMBLE IN
PROVEN TECHNOLOGY INTEGRATION WITH OTHER WORKSHOP, STANDARD
TECHNOLOGIES
- ACTIFLO CARB
2019 STANDARD PRODUCT TRAINING - SEA
- ACTIFLO SOFTENING 40
Q
A
2019 STANDARD PRODUCT TRAINING - SEA
41
