Data sheet 6GK5788-1FC00-0AA0
Product type designation SCALANCE W788-1 RJ45
IWLAN Access Point, SCALANCE W788-1 RJ45, 1 radio, 3 R-SMA
antenna port, iFeatures support via key plug, IEEE 802.11a/b/g/h/n,
2.4/5GHz, gross 450 Mbit/s per radio, 1x RJ45 max. 1 Gbit/s, PoE,
redundant 24 V DC, terminal block, IP30, -20..+60 °C, plug slot,
WPA2/802.11i/e, Signaling contact observe national approvals!
CERT ID: RAPN-W1-RJ-E3, includes: MPCIE-R1-ABGN-U3, scope
of delivery: Manuals on CD-ROM, German/English, 2x terminal
blocks; for operation outside of USA/Israel
Transmission rate
Transfer rate
● with WLAN / maximum 450 Mbit/s
● for Industrial Ethernet 10, 100, 1000 Mbit/s
Transfer rate / for Industrial Ethernet
● minimum 10 Mbit/s
● maximum 1000 Mbit/s
Interfaces
Number of electrical connections
● for network components or terminal equipment 1
● for power supply 1
● for redundant voltage supply 1
Type of electrical connection
● for network components or terminal equipment RJ45 socket
● for power supply 4-pole screw terminal, PoE
design of the removable storage
● C-PLUG Yes
6GK5788-1FC00-0AA0 Subject to change without notice
Page 1/7 08/28/2019 © Copyright Siemens
● KEY-PLUG Yes
Interfaces / wireless
Number of radio cards / permanently installed 1
Transmission mode / for multiple input multiple output 3x3
(MIMO)
Number of spatial streams 3
Number of electrical connections / for external 3
antenna(s)
Type of electrical connection / for external antenna(s) R-SMA (socket)
Product feature / external antenna can be mounted Yes
directly on device
Signal-Inputs/outputs
Number of digital inputs 1
Number of digital outputs 1
Type of electrical connection / at the digital 4-pole screw terminal
inputs/outputs
Signal range / at digital input 24 V DC, safety extra-low voltage
Signal range / at digital output 24 V DC / 1 A
Supply voltage, current consumption, power loss
Type of voltage / of the supply voltage DC
Supply voltage / 1
● from terminal block 19.2 V
Supply voltage / 2
● from terminal block 28.8 V
Supply voltage
● from Power-over-Ethernet acc. to IEEE802.3at 48 V
for type 1 and IEEE802.3af
● from Power-over-Ethernet acc. to IEEE802.3at 50 V
for type 2
Consumed current
● at DC / at 24 V / typical 0.45 A
● with Power-over-Ethernet according to 0.22 A
IEEE802.3at for type 1 and IEEE802.3af / typical
Power loss [W]
● at DC / at 24 V / typical 10.7 W
Permitted ambient conditions
Ambient temperature
● during operation -20 ... +60 °C
● during storage -40 ... +85 °C
● during transport -40 ... +85 °C
Relative humidity / at 25 °C / without condensation / 90 %
during operation / maximum
6GK5788-1FC00-0AA0 Subject to change without notice
Page 2/7 08/28/2019 © Copyright Siemens
Ambient condition / for operation When used under hazardous conditions (Zone 2), the SCALANCE
W788-x or W748-x product must be installed in an enclosure. To
comply with EN 50021, this enclosure must meet the
requirements of at least IP 54 in compliance with EN 60529.
Protection class IP IP30
Design, dimensions and weight
Width / of the enclosure / without antenna 200 mm
Height / of the enclosure / without antenna 158 mm
Depth / of the enclosure / without antenna 79 mm
Net weight 1.7 kg
Mounting type For 35 mm DIN rail mounting an additional mounting adapter is
required
● S7-300 rail mounting Yes
● S7-1500 rail mounting Yes
● 35 mm DIN rail mounting Yes
● wall mounting Yes
Wireless frequencies
Operating frequency
● for WLAN in 2.4 GHz frequency band 2.41 ... 2.48 GHz
● for WLAN in 5 GHz frequency band 4.9 ... 5.8 GHz
Product properties, functions, components / general
Product function / Access Point Mode Yes
Product function / Client Mode Yes
Number of SSIDs 8
Product function
● iPCF Access Point Yes; Only in combination with the 'KEY-PLUG W780 iFeatures'
● iPCF client Yes; Only in combination with the 'KEY-PLUG W780 iFeatures' or
'KEY-PLUG W740 iFeatures'
● iPCF-MC Access Point No
● iPCF-MC client Yes; Only in combination with 'KEY-PLUG W780 iFeatures' or
'KEY-PLUG W740 iFeatures'
Number of iPCF-capable radio modules 1
Product function / iREF Yes; In combination only with 'KEY-PLUG W780 iFeatures'
Number of iREF-capable radio modules 1
Product function / iPRP Yes; In combination with the 'KEY-PLUG W780 iFeatures' only
Product functions / management, configuration
Number of manageable IP addresses / in client 8
Product function
● CLI Yes
● web-based management Yes
● MIB support Yes
● TRAPs via email Yes
6GK5788-1FC00-0AA0 Subject to change without notice
Page 3/7 08/28/2019 © Copyright Siemens
● Configuration with STEP 7 Yes
● configuration with STEP 7 in the TIA Portal Yes
● operation with IWLAN controller No
● operation with Enterasys WLAN controller No
● forced roaming on IP down with IWLAN Yes
● forced roaming on link down with IWLAN Yes
● WDS Yes
Protocol / is supported
● Address Resolution Protocol (ARP) Yes
● ICMP Yes
● Telnet Yes
● HTTP Yes
● HTTPS Yes
● TFTP Yes
● DCP Yes
● LLDP Yes
Identification & maintenance function
● I&M0 - device-specific information Yes
● I&M1 – higher-level designation/location Yes
designation
Product functions / Diagnosis
Product function
● PROFINET IO diagnosis Yes
● Link Check No
● connection monitoring IP-Alive No
● localization via Aeroscout Yes
● SysLog Yes
Protocol / is supported
● SNMP v1 Yes
● SNMP v2 Yes
● SNMP v3 Yes
Product functions / VLAN
Product function
● function VLAN with IWLAN Yes
Product functions / DHCP
Product function
● DHCP client Yes
● DHCP server Yes
● DHCP Option 82 Yes
Product functions / Redundancy
6GK5788-1FC00-0AA0 Subject to change without notice
Page 4/7 08/28/2019 © Copyright Siemens
Protocol / is supported
● STP/RSTP Yes
● MSTP Yes
● RSTP Yes
Product functions / Security
Product function
● ACL - MAC-based Yes
● Management security, ACL-IP based Yes
● IEEE 802.1x (radius) Yes
● NAT/NAPT No
● access protection according to IEEE802.11i Yes
● WPA/WPA2 Yes
● TKIP/AES Yes
Protocol / is supported
● SSH Yes
● RADIUS Yes
Product functions / Time
Protocol / is supported
● NTP Yes
● SNTP Yes
● SIMATIC time synchronization (SIMATIC Time) Yes
Standards, specifications, approvals
Standard
● for FM FM 3611: Class I, Division 2, Groups A,B,C,D, T4 / Class 1, Zone
2, Group IIC, T4
● for hazardous zone EN 60079-15:2005, EN 60079-0:2006, II 3 G Ex nA II T4 KEMA
07 ATEX 0145X
● for safety / from CSA and UL UL 60950-1, CSA C22.2 No. 60950-1
● for hazardous zone / from CSA and UL ANSI/ISA 12.12.01-2013, CAN/CSA C22.2 No.213-M1987, CL. 1,
Div. 2, GP. A,B,C,D, T4 / CL. 1, Zone 2, GP IIC
Certificate of suitability
● EC declaration of conformity Yes
● CE marking Yes
● C-Tick Yes
● E1 approval Yes
● Railway application in accordance with EN No
50155
● Railway application in accordance with EN No
50121-4
● NEMA TS2 No
● IEC 61375 No
6GK5788-1FC00-0AA0 Subject to change without notice
Page 5/7 08/28/2019 © Copyright Siemens
● IEC 61850-3 No
● NEMA4X No
● Power-over-Ethernet according IEEE802.3at Yes
for type 1 and IEEE802.3af
● Power-over-Ethernet according to IEEE802.3at Yes
for type 2
Standard for wireless communication
● IEEE 802.11a Yes
● IEEE 802.11b Yes
● IEEE 802.11e Yes
● IEEE 802.11g Yes
● IEEE 802.11h Yes
● IEEE 802.11i Yes
● IEEE 802.11n Yes
Wireless approval You will find the current list of countries at:
www.siemens.de/funkzulassungen
Marine classification association
● American Bureau of Shipping Europe Ltd. Yes
(ABS)
● Bureau Veritas (BV) Yes
● DNV GL Yes
● Lloyds Register of Shipping (LRS) Yes
● Nippon Kaiji Kyokai (NK) Yes
● Polski Rejestr Statkow (PRS) Yes
● Royal Institution of Naval Architects (RINA) Yes
Accessories
accessories 24 V DC screw terminal and screw terminal for digital input and
output included in the scope of delivery
Further Information / Internet Links
Internet-Link
● to website: TIA Selection Tool http://www.siemens.com/tia-selection-tool
● to the website: IWLAN http://www.siemens.com/iwlan
● to website: Industry Mall https://mall.industry.siemens.com
● to website: Information and Download Center http://www.siemens.com/industry/infocenter
● to website: Image database http://automation.siemens.com/bilddb
● to website: CAx Download Manager http://www.siemens.com/cax
● to website: Industry Online Support https://support.industry.siemens.com
Security information
6GK5788-1FC00-0AA0 Subject to change without notice
Page 6/7 08/28/2019 © Copyright Siemens
Security information Siemens provides products and solutions with industrial security
functions that support the secure operation of plants, solutions,
machines, equipment and/or networks. They are important
components in a holistic industrial security concept. With this in
mind, Siemens’ products and solutions undergo continuous
development. Siemens recommends strongly that you regularly
check for product updates. For the secure operation of Siemens
products and solutions, it is necessary to take suitable preventive
action(e.g. cell protection concept) and integrate each component
into a holistic, state-of-the-art industrial security concept. Third-
party products that may be in use should also be considered. For
more information about industrial security, visit
http://www.siemens.com/industrialsecurity. To stay informed about
product updates as they occur, sign up for a product-specific
newsletter. For more information, visit
http://support.automation.siemens.com. (V3.4)
last modified: 08/27/2019
6GK5788-1FC00-0AA0 Subject to change without notice
Page 7/7 08/28/2019 © Copyright Siemens
