Accede a apuntes, guías, libros y más de tu carrera

Amigurumi Perrito Husky

10 pag.

Descargado por Manuela ([email protected])

Encuentra más documentos en www.udocz.com

 husky
pattern by Medaami

Descargado por Manuela ([email protected])

Encuentra más documentos en www.udocz.com

Hi there! Thank you for purchasing this pattern! :)

This pattern is originaly designed by Medaami and is for personal use only. DO
NOT duplicate, sell or distribute this pattern in any sort of way. However, you
may sell the finished product in SMALL mass but please clearly credit Medaami
as the pattern designer. Thanks for your understanding!

Don't hesitate to DM me on instagram @medaami, or email to medaamiby-

[email protected] if you have any questions or feedbacks.

Have fun! :)

Descargado por Manuela ([email protected])

2
Encuentra más documentos en www.udocz.com
DIFFICULTY
Easy - Intermediate

YOU'LL NEED:
- Any yarn in dark gray, white and black color
- Crochet hook that matches the size of your yarn
- A pair of safety eyes and washer
- A plastic nose / black felt
- Tapestry/yarn needle
- Stitch marker
- Scissors
- Stuffing

SIZE
I used Bali cotton yarn in size #2 (sport), a 2.50mm crochet hook,
and a pair of 12mm safety eyes. My Husky turned out to be approxi-
mately 12cm (4.7") tall.

ABBREVIATIONS
R = round/row
ch = chain
st(s) = stitch(es)
sc = single crochet
dc = double crochet
hdc = half double crochet
inc = 2 sc in 1 st
dec = 1 sc in 2 st
BLO = back loop only
sl st = slip stitch
sk = skip
x(...) = repeat (...) times
[...] = a total of [...] stitches on that round
Descargado por Manuela ([email protected])
3
Encuentra más documentos en www.udocz.com
husky PATTERN

HEAD
(dark gray)
R1: ch 13, (starting from the 2nd ch from hook) 12sc, continue to the
other side and 12sc again, and now you're working in rounds. [24]
R2: (inc, 3sc) x6 [30]
R3: (inc, 4sc) x6 [36]
R4: (inc, 5sc) x6 [42]
R5-R9: sc around (5 rounds) [42]
R10: (inc, 6sc) x6 [48]
R11-R12: sc around (2 rounds) [48]
R13: (inc, 7sc) x6 [54]
R14-R21: sc around (8 rounds) [54]
R22: (dec, 7sc)x6 [48]
R23: (dec, 6sc) x6 [42]
R24: (dec, 5sc) x6 [36]
R25: (dec, 4sc) x6 [30]
Insert the eyes (I inserted it between round 16 and 17, and about 11
sts in between), snap the washer in and stuff firmly.
R26: (dec, 3sc) x6 [24]
R27: (dec, 2sc) x6 [18]
Sl st, fasten off, leave a tail for sewing, add more stuffing if needed.

Descargado por Manuela ([email protected])

4
Encuentra más documentos en www.udocz.com
body
(dark gray)
R1: ch 11, (starting from the 2nd ch from
hook) 10sc, continue to the other side and
10sc again, and now you're working in
rounds. [20]
R2: (inc, 3sc) x5 [25]
R3: (inc, 4sc) x5 [30]
R4: (inc, 5sc) x5 [35]
R5: (inc, 6sc) x5 [40]
R6-R9: sc around (4 rounds) [40]
R10: (dec, 6sc) x5 [35]
R11: (dec, 5sc) x5 [30]
R12: (dec, 4sc) x5 [25]
R13: (dec, 3sc) x5 [20]
Stuff firmly.
R14: (dec, 2sc) x5 [15]
R15: (dec, sc) x5 [10]
R16: dec x5 [5]
Finish off, fasten off and weave the tail in

legs (make 4)
(white, dark gray)
R1: (in white) 4sc in magic ring [4]
R2: inc x4 [8]
R3: BLO, sc around [8]
R4: (inc, 3sc) x2 [10]
R5-R7: (change to dark gray) sc around
(3 rounds) [10]
Sl st, fasten off, leave a tail for sewing
and stuff lightly.
Descargado por Manuela ([email protected])
5
Encuentra más documentos en www.udocz.com
 tail
(white, dark gray)
R1: (in white) 4sc in magic ring [4]
R2: (inc, sc) x2 [6]
R3: (inc, 2sc) x2 [8]
R4-R5: sc around (2 rounds) [8]
R6: (change to dark gray) sc around [8]
R7: dec x4 [4]
Sl st, fasten off, leave a tail for sewing
and stuff lightly.

EARS (make 2)
(white, dark gray)

We’re making the white piece first, work in rows.

R1: ch 8, (starting from the 2nd ch from hook) 7sc, ch 1 and turn [7]
R2-R4: sc in all sts, ch 1 and turn (3 rows) [7]
R5: sc, sk 1 st, 3sc, sk 1 st, sc, ch 1 and turn [5]
R6: sc in all sts, ch 1 and turn [5]
R7: sc, sk 1 st, sc, sk 1 st, sc [3]
R8: sc, sk 1 st, sc [2]
R9: sk 1 st, sc [1]
Sl st, fasten off and weave the tail in.
Make the other one in dark gray.
Place the white piece above the dark gray piece, and to merge both
pieces, sc around the upper part only.

Descargado por Manuela ([email protected])

6
Encuentra más documentos en www.udocz.com
Snout
(white)
R1: ch 7, (starting from the 2nd ch from
hook) 6sc, continue to the other side and 6sc
again, and now you're working in rounds. [12]
R2: (inc, sc) x6 [18]
R3: (inc, 2sc) x6 [24]
R4: (inc, 3sc) x6 [30]
R5-R7: sc around (3 rounds) [30]
Sl st, fasten off and leave a tail for sewing.

Embroider a line in the centre of the snout.

(illustration)
You can insert plastic nose, or glue a felt nose after you sew and stuff
the snout onto the face.
I use a plastic nose and cut off the back a little bit using a cutting
plier.

Face white spot

(white)
R1: ch 19, (starting from the 2nd ch from hook)
18sc, continue to the other side and 18sc again,
and now you're working in rounds. [36]
R2: (inc, 2sc) x12 [48]
R3: sc around [48]
R4: (dec, 4sc) x8 [40]
Sl st, fasten off and leave a tail for sewing.

Descargado por Manuela ([email protected])

7
Encuentra más documentos en www.udocz.com
 middle white spot
(white)
ch 13, (starting from the 2nd ch from hook)
3 sl st, 2sc, 2hdc, 4dc, sl st.
Sl st, fasten off and leave a tail for sewing.

eyebrow white spots (make 2)

(white)
ch 5, (starting from the 2nd ch from hook)
sl st, 2dc, sl st.
Sl st, fasten off and leave a tail for sewing.

body white spot

(white)
R1: ch 17, (starting from the 2nd ch from hook)
16sc, continue to the other side and 16sc again,
and now you're working in rounds. [32]
R2: (inc, 3sc) x8 [40]
R3: sc around [40]
R4: (dec, 6sc) x5 [35]
Sl st, fasten off and leave a tail for sewing.

assembly
I recommend to use ball point pins for assembly. This way will help
you to keep the pieces in place and make it easier to do the sewing.
I'm using a hot glue gun to attach the eyebrows , but if you make this
amigurumi for kids, I recommend to make it fully sewn.

Descargado por Manuela ([email protected])

8
Encuentra más documentos en www.udocz.com
1. Sew the head to the body.

2. Sew the face white spot below the eyes, the middle white spot be-
tween the eyes, and the body white spot on the front part and lower
part of the body.

3. Sew the legs to the bottom part of the body, and the tail to the
back side of the body.

4. Sew the snout below the eyes, leave a gap and insert stuffing,
then sew the gap closed.

5. Sew the ears to the top of the head.

Descargado por Manuela ([email protected])

9
Encuentra más documentos en www.udocz.com
 6. Sew/glue the eyebrows above the eyes.
And.. You’re done!

I hope you had fun making them. Please leave a review and share pictures of your creations
and tag me on instagram @medaami, I'd really appreciate it and I’d be really happy to see
your creations!

Questions or feedbacks? Feel free to DM me on instagram @medaami or email me at

[email protected]

"PUSH IN" EFFECT

This step is optional, but I like to give the "push in" effect (or what they call it) to the eyes.
1) Tie a knot on the inner right eye.
2) Using a yarn/tapestry needle, bring the yarn inside and pull it out on the inner left eye.
3) Pull the yarn slightly while pushing both eyes in to give that "push in" effect then tie a
knot to secure it.
Weave any tails in, and you're done once again! :)

(illustrations)

Descargado por Manuela ([email protected])

10
Encuentra más documentos en www.udocz.com