System Requirements:

01. Checking OS Compatibility

Processor: 1 gigahertz (GHz) or faster

1 gigabyte (GB) (32-bit) or 2 GB (64-bit)
Free hard disk space: 16 GB
Graphics card: Microsoft DirectX 9 graphics device with WDDM driver
A Microsoft account and Internet access

02. Hardware Compatibility

Your PC Hardware Accessories Performance

03. User Requirement

First Listen to Customer and Suggest your Idea

Explain technically in your idea

Create Bootable Media

01 st option

Create Windows 10 USB with Media Creation Tool

To create an installation media using the Media Creation Tool, connect a USB flash drive of at
least 8GB of space, and use these steps:

1. Open Windows 10 download page.

2. Under the "Create Windows 10 installation media" section, click the Download tool now
button to save the file on the device.
3. Double-click the MediaCreationToolxxxx.exe file to launch the tool.
4. Click the Accept button to agree to the terms.
5. Select the Create installation media (USB flash drive, DVD, or ISO file) for another
PC option.
 Click the Next button.
 (Optional) Clear the Use the recommended options for this PC option.

 Select the correct language, architecture, and edition of Windows 10.

 Quick tip: If you plan to install Windows 10 on several devices running the 32-bit or 64-bit
architecture, use the "Architecture" drop-down menu and select the Both option.

 Click the Next button.

 Select the USB flash drive option.

 Click the Next button

 Select the USB flash drive (or click the "Refresh drive list" option to make it available).
 1. Click the Next button.
2. Click the Finish button.

Once you complete the steps, the tool will download the files and create an installer with the
latest installation files, which you can then use to start the device and configure a fresh copy of
Windows 10.
2nd Option

Create Windows 10 USB with Rufus

Alternatively, you can use the Rufus tool to create an installation media for devices with
motherboards featuring UEFI or BIOS firmware.

Rufus is a tool available for free with many options to help you create a bootable media of
Windows 10 faster. However, it's important to remember that it's a third-party option, which
Microsoft does not support, so use it at your own risk.

To create a Windows 10 USB installer with Rufus, connect a USB flash drive of at least 8GB of
space, and then use these steps:

1. Open Rufus download page.

2. Under the "Download" section, click the link to save the latest release on your device.

Source: Windows Central

3. Double-click the Rufus-x.xx.exe file to launch the tool.

4. Click the Settings button (third button from the left) at the bottom of the page.
 Source:
Windows Central

5. Under the "Settings" section, use the Check for updates drop-down menu and select the
Daily option.
 Source:
Windows Central

Quick tip: These steps are necessary to enable the option to use the tool to download the
ISO file of Windows 10.

6. Click the Close button.

7. Close the Rufus tool.
8. Relaunch the Rufus tool.
9. Under the "Device" section, use the drop-down menu to select the USB flash drive.
10. Under the "Boot selection" section, click the down arrow button on the right and select
the Download option.
 Source:
Windows Central

Quick tip: If you already have an ISO file, click the Select button, select the Windows
10 ISO file, and continue with step No. 24.

11. Click the Download button.

12. Use the "Version" drop-down menu and select the Windows 10 option.
13. Click the Continue button.
14. Select the 20H2 (Build 19042.xxx - xxxx.xx) option to download the Windows 10
October 2020 Update.
15. Click the Continue button.
16. Use the "Edition" drop-down menu and select the Windows 10 Home/Pro option.
17. Click the Continue button.
18. Use the "Language" drop-down menu and select your installation language.
 Quick tip: If you're in the United States, select the "English" option, not "English
International."

19. Click the Continue button.

20. Use the "Architecture" drop-down menu and select the 32-bit or 64-bit (recommended).
21. Click the Download button.

Source:
Windows Central

22. Select a folder location to download the ISO file.

23. Click the Save button.
24. Use the "Image option" drop-down menu to select the Standard Windows installation
option.
25. Use the "Partition scheme" drop-down menu to select the GPT option.
26. Use the "Target system" drop-down menu to select the UEFI (non CSM) option.
 Source: Windows Central

Quick note: If the computer includes a legacy BIOS, select the MBR option for partition
scheme and BIOS (or UEFI-CSM) option target system.

27. Under the "Show Advanced drive properties" section, don't change the default settings.
28. Under the "Volume label" field, enter a descriptive name for the drive — for example,
"win10_usb."
29. Under the "File system" and "Cluster size" section, don't change the default settings.
30. Click the Show advanced format options button.
31. Select the Quick format and Create extended label and icon files options.
32. Click the Start button.
33. Click the OK button to confirm.
 34. Click the Close button.

How to perform clean install of Windows 10

The installation process of Windows 10 has two main parts, including the setup and out-of-box
experience (OOBE). In the setup process, that's where you will select some of the basic settings,
and you'll find the options to erase the hard drive, configure the partitions, and clean install
Windows 10. The out-of-box experience happens after the setup is complete, and it's the stage
where you'll configure your settings, such as region, network, account, privacy, and other
settings.

Windows 10 clean installation process

Once you went through the preparation instructions, the clean install of Windows 10 is actually a
straightforward process.

Warning: This is another friendly reminder that this process will erase everything on the
computer. It's always recommended to make a temporary full backup of your PC before
proceeding.

To do a clean installation of Windows 10, use these steps:

1. Connect Peripherals
2. Turn on the PC and Log in BIOS press Relevant Key (F2,DEL,F10,ESC)
3. Default the BIOS
4. Setup the date time and boot sequence

1st Boot CD Rom

2nd Boot Hard Disk

OR
1ST Boot Removable Device
2nd Boot Hard Disk

OR
1st Network (IPV4/IPV6) Push Up Server WDS Role
2nd Boot Hard Disk

5. Insert Boot Media

6. Save and Exit
7. Start the device with Windows 10 Optical or USB media.
8. On prompt, press any key to boot from the device.
9. On the "Windows Setup," click the Next button.
 Source: Windows Central

Quick tip: If your language, time and currency, and keyboard are different from the
default selections, make sure to select the correct settings before continuing.

10. Click the Install now button.

 Source: Windows Central

11. If you're doing a reinstallation, click the I don't have a product key option to continue
(assuming that your device was already activated). Otherwise, in the case that this is your
first time installing Windows 10, enter the product key.
 Source: Windows Central

12. Click the Next button.

13. Select the edition of Windows 10 (If applicable).
 Source: Windows Central

Quick note: This selection must match the edition that the product key activates. If you
don't select the correct edition, Windows 10 won't activate, and you'll have to redo the
entire process one more time.

14. Click the Next button.

15. Select the I accept the license terms option to continue.
16. Click the Next button.
17. Click the Custom: Install Windows only (Advanced) option to continue with a clean
installation.
 Source: Windows Central

18. Select the partition with the current installation (usually "Drive 0"), and click the Delete
button.

Quick tip: If "Drive 0" has multiple partitions, you have to select and delete each
partition to allow the setup to use the entire hard drive for the new clean installation. The
Windows 10 setup will create the required partitions automatically during the process.
Also, it's not necessary to delete the partitions on secondary drives.

19. Click the Yes button.

 Source: Windows Central

20. Select the empty drive (Drive 0 Unallocated Space).

 Source: Windows Central

21. Click the Next button.

Once you complete the steps, the setup will install a fresh copy of Windows 10 on the computer.

If you plan to decommission the device, you can stop now and let the new owner complete the
out-of-box experience. However, in the case that you're upgrading your system, then continue
with the instructions below.

Windows 10 out-of-box experience

After the setup, you have to continue with the out-of-box experience to configure your
preferences and create a new account.

This guide follows the out-of-box experience available with the Windows 10 October 2020
Update. However, depending on the release you are installing, the steps may be slightly different.
To complete the OOBE on Windows 10, use these steps:

1. Select your Region option.

Source: Windows Central

2. Click the Yes button.

3. Select your keyboard layout option.
 Source: Windows Central

4. Click the Yes button.

5. Click the Skip button (unless you need to add a second keyboard layout).

Quick note: If you're not using a wired network connection, you'll have to sign in to the
wireless network.

6. Select the Set up for personal use option.

 Source: Windows Central

7. Click the Next button.

8. Confirm your Microsoft account information to create an account.
 Source: Windows Central

Quick note: The recommended process is to use a Microsoft account. However, if you
want to use a traditional local account, you'll need to click the Offline account option
from the bottom-left corner and then continue with the on-screen directions.

9. Click the Next button.

10. Confirm your account password.
 Source: Windows Central

11. Click the Next button.

12. Click the Create PIN button.
 Source: Windows Central

13. Create a four-digit Windows Hello PIN.

 Source: Windows Central

Quick tip: If you want to continue using a traditional password, click the Cancel button
to skip the process.

14. Select your privacy settings (and don't forget to scroll down the page to review all the available
settings).
15. Click the Accept button.
 Source: Windows Central

16. (Optional) You can provide your phone number and then click the Send button to link
your phone with your device. If you want to skip this option, click the Do it later button
in the screen's bottom-left corner.
 Source: Windows Central

17. (Optional) Click the Next button to allow OneDrive to backup the Desktop, Documents,
and Pictures folders to the cloud. If you use another cloud service or prefer not to upload
files to the cloud, click the Only save files to this PC option in the screen's bottom-left
corner.
 Source: Windows Central

18. Click the No, thanks button to skip the Microsoft 365 setup (as necessary).
 Source: Windows Central

Quick tip: If you have an Office product key, you can click the I have a product key
option, and then the apps will install automatically on your device.

19. (Optional) Check the Let Cortana respond to "Hey Cortana" option to use the assistance hands-
free.
20. Click the Accept button to allow Microsoft to collect personal information to make
Cortana more personal. If you're not interested in the digital assistant, click the Not now
button to continue.
 Source: Windows Central

After you complete the steps, the new settings will apply to the clean installation of Windows 10,
and you should be able to see the default desktop experience.

How to complete setup after install of Windows 10

After the installation, it's also a good idea to check that Windows 10 isn't missing any critical
updates or drivers and properly activated.

Install updates

To check for updates on Windows 10, use these steps:

1. Open Settings.
2. Click on Update & Security.
3. Click on Windows Update.
 4. Click the Check for updates button.

Source: Windows Central

Once you complete the steps, if Windows Update finds any updates, it'll automatically download
and install them. A restart may be required to complete the update process.

Install Virus Guard

Now available in virus guard in build windows Defender (Windows 07/8.1/10)

Why you are install virus guard? Sometimes viruses effaced in Diver CD, Removable Disk Drive, Another
Partition in System

 Install virus Guard

 Add the License Key of Virus Guard
 Update the Virus Guard
 Then Run Full Scan or Custom Scan
Install Device Drivers

Windows install කිරීමෙන් පසුව windows සෙගෙ Basic Device Drivers පැමිමේ. එෙ නිසා අපට on
කල විට ෙ අපට භාවිතයට ගන්න පලුවන්,උදාහරණයක් window install කල පසුව display
පැමිමේ.නමුත් game එකක් play කල මනාහැක. නමුත් එෙ device වල Best Profomance ලබා
ගැනීෙට updated Drivers Install කල යුතුය.

Drivers Install කරන්න පුළුවන් ක්‍රෙ

o Mother board Driver CD එමකන් drivers Install කරලා update කල යුතුයි.

o Mother board එකට අදාලව Official web site එක ෙගින් download කර ගැනීමෙන්
o Windows update එක ෙගින් (windows 10)
o Device Manager එමකහි Right Click කර update device driver ෙගින්
o 3 rd Party App එකක ෙගින් (මෙෙ ක්‍රෙය අනුෙත කරන්මන් නැත.මෙෙ ක්‍රෙය වඩාත්
පහසු වුවද මේ හරහා virus ,addons ,plugins add විෙට ඉඩකඩ ඇති මහයිනි )
Ex: Driver Pack, 3dp chip, Driver easy, Driver Robert etc….

To determine whether drivers are missing, use these steps:

1. Open Start.
2. Search for Device Manager and click the top result to open the console.
3. Confirm that none of the devices have a yellow or red mark, or seen Exclamation mark
and make sure nothing is listed as unknown.
 Source: Windows Central

If one or multiple devices have problems, you may need to manually download and install the
latest drivers from your computer manufacturer's support website. You can use this guide to
install device drivers on Windows 10.

Drivers Install කිරිමෙදී ඊට මපර restore Point එකක් සකස් කර ගන්න. යේ install කිරීෙකදී windows
වලට හානියක් වුවමහාත් මපර පැවති තත්වයට Restore කර ගත හැක.

යේ පිළිමවලකට Drivers Install කල යුතුය.

 Chipset
 Video
 Audio
 Lan
 Wireless
 RAID
 Bluetooth etc…

මේ එකින් එක Install කර අවසානමේ එකින් එක Restart කල යුතුය.Restrat වීමේදී අලුතින් එකතු වූ

updates apply වනුමේ restart වී නැවත පරිගනකය on වීමේදිය.
Install missing drivers

On Windows 10, drivers can also be part of the optional updates. If you're missing one or
multiple drivers, you may be able to download them from Windows Update.

To download missing drivers using Windows Update, use these steps:

1. Open Settings.
2. Click on Update & Security.
3. Click on Windows Update.
4. Click the View optional updates option. If the option isn't available, then Windows
Update doesn't have any driver updates for your device.

Source: Windows Central

5. Click the Driver updates section.

6. Select the missing driver.
 Source: Windows Central

7. Click the Download and install button.

After you complete the steps, Windows Update will download and install the missing drivers
automatically.

Confirm activation

To confirm Windows 10 was properly activated, use these steps:

1. Open Settings.
2. Click on Update & Security.
3. Click on Activation.
4. If Windows 10 activated successfully, one of the following messages would appear:
o Windows is activated with a digital license: The installation has been activated, but it
isn't linked to your Microsoft account.
o Windows is activated with a digital license linked to your Microsoft account: The
installation has been activated, and the license is linked to your Microsoft account.
 Source: Windows Central

In the case that Windows 10 didn't activate, the device will try to reactivate at a later time. If
you're still having issues after a couple of days, you can use the Activation Troubleshooter to
activate.

Windows License License Key වර්ග

 OEM - මේවා පරිගණක නිෂ්පාදකයන්ට (Original Equipment Manufacturer) මතාග

වශමයන් අමලවි කරන ඒවා යි. ඒවා එක් පරිගණකයකට එකක් බැගින් මයාදා
එවනවා. වරක් Activate කළාට පසු (මබාමහෝ විට ඔවුන්ෙ කරනවා) නැවත තවත්
පරිගණකයකට මයාදන්න බැහැ. ඇතැේ නූතන පරිගණකවල UEFI/BIOS ෙඟින්
වින්මඩෝස් ස්ථාපනමය් දී මේවා ස්වයංක්‍රීයවෙ මයාදනු ලබනවා.

 Retail - යනු නමින් කියැමවන්නාක් මස් ෙ, සිල්ලර වශමයන් මිල දී ගත හැකි ඒවා
යි. Microsoft මහෝ මවනත් බලයලත් නිමයෝජිතමයක්මගන් අපිට මේවා මිල දී ගත
හැකියි. මතාග මිලට වඩා මේවාමේ මිල ෙඳක් වැඩි වන අතර, රු. 10,000 - 20,000
මහෝ ඊට වැඩි අගයක් මවනවා.

 Digital - Windows 10වල අන්තර්ජාලය හරහා Activate කිරීමේ දී Retails Keys මේ

නමින් හැඳින්මවනවා. ඒවා මබාමහෝ විට ෙයිමක්‍රාමසාෆ්් ගිණුෙ හා බැඳුණු ඒවා
යි. ඇතැේවිට, BizPark වැනි මස්වාවන් හරහා ලබාදුන් ඒවා, Windows 7/8වල සිට
Free Upgrade කරද්දදී ලැමබන ඒවා ද මේ ගණමයහි ලා සැලමකනවා.
ඔමේ Key එමක් වර්ගය Settings > Update & Security > Activation මවත පිවිසී බලාගන්න
පුළුවන්.