RTM Dy CSTE Akhilesh Verma Sir Dahod Indore DT 15 06 24
RTM Dy CSTE Akhilesh Verma Sir Dahod Indore DT 15 06 24
DYCSTE-C-RTM-S AND T
O/o Dy.CSTE/C/Ratlam,
DRM Office,, Do Batti
RATLAM, 457001
Madhya Pradesh , India
The Competent Authority has accepted your offered rates in connection with the
subject work. The total cost of the work at the accepted rates works out to Rs.
27000441.87 (Rupees Two Crore Seventy Lakh Four Hundred And Fourty-One Rupees
And Eighty-Seven Paise Only)
You are requested to submit Performance Guarantee in the form as given in Clause
4.16 of Tender document equivalent to 5 % of the contract value amounting to Rs.
1350022.09 (Rupees Thirteen Lakh Fifty Thousand And Twenty-Two Rupees And Nine
Paise Only) within 21 days from the date of issue of Letter of Acceptance, valid up to
stipulated date of completion plus 60 days so that contract agreement can be executed.
However, a penal interest of 12% per annum shall be charged for the delay beyond 21
(Twenty-one) days, i.e. from the 22nd day after the date of issue of LOA. Further, if the
60th day happens to be a declared holiday in the concerned office of the Railway, the
submission of PG can be accepted on the next working day. In all other cases, if the
Contractor fails to submit the requisite PG even after 60 days from the date of issue of
LOA, the contract is liable to be terminated. In case the contract is terminated, the
railway shall be entitled to forfeit the Earnest Money Deposit.
The entire work shall be completed within 12 month from the date of issue of Letter
of Acceptance.
Consignee : The consignee (store) SSE/SIG/C/RTM and concern site supervisor for
execution work.
Program of work execution : You are requested to draw a program for the execution of
work in consultation with Dy. CSTE/C/RTM so as to complete the work within the
stipulated period. The copies of this program duly signed by you may please be sent to
this office for record.
Wages Act I : You must abide by the provisions of the Payment of Wages Act &
Minimum Wages Act in terms of clauses 54 and 55 of the Indian Railways General
Conditions of Contract. In order to ensure the same, an application has been developed
and hosted on the website (www.shramikkalayan.indianrailways.gov.in). You shall
register your firm/company etc. and upload requisite details of labour and their payment
in this portal. These details shall be available in the public domain. You shall apply for a
one-time registration of your company/firm etc. in the Shramik Kalyan portal with the
requisite details subsequent to the issue of this Letter of Acceptance and once registered
on the portal, you shall provide details of the Letter of acceptance (LOA)/Contract
Agreement on Shramik Kalyan portal within 15 days from the date of issue of this LOA
for approval of the concerned engineer.
Wages Act II : While processing payment of any 'On Account Bill' or 'Final Bill' or
release of 'Advances' or 'Performance Guarantee / Security Deposit', the contractor shall
submit a certificate to the Engineer or Engineer's representatives.
Labour license : You are also requested to obtain a license from the Assistant Labour
Commissioner (Central) concerned under the Contract Labour (Regulation & Abolition
Act- 1970) and the contract labour (Regulation & Abolition) Central Rules 1971, before
the commencement of the work.
All Other terms and conditions, as stipulated in the tender documents shall be
applicable.
AKHILESH VERMA
Dy.CSTE CONST. RTM
Digitally Signed
View Signature Details
Item Item Desc Item Item Qty Unit Escl. Advt.Value Bid Rate/ Bid Amount
Sno. Code Qty Unit Rate(Rs) (%) (Rs) Unit Rate (Rs)
Schedule A-Supply & Execution of SOR Items (Item Directory - Not
1031308.00
Applicable)
Fire Extinguisher CO2 type
1 01080900 2 Numbers 7276.00 At Par 14552.00
(capacity 5 kg.)
Office Chair makes Godrej CH-
2 01090100 4 Numbers 2486.00 At Par 9944.00
7B or similar of reputed brand.
Office Revolving Chair Godrej
3 Make Model No.9u02r Bravo Or 01090200 2 Numbers 7635.00 At Par 15270.00
Similar of reputed brand.
Office table with laminated top
with three drawers on left hand
side and one locker on the right
4 hand side. Olive brown with 01090300 2 Numbers 14441.00 At Par 28882.00
duplicate keys. Make: Godrej
Model T-9 or Similar of reputed
brand.
Steel Plain Almirah with 4
adjustable slaves Size: 1980mm
height, 915 mm width, and 485
5 01090400 2 Numbers 15984.00 At Par 31968.00
mm depth. Make Godrej
Storewel Plain Large or Similar
of reputed brand.
Medium Class G.I. Pipes to IS :
1239 (Pt.I)-2004 or latest ;
100mm dia. ( int. dia) 3.65
mm+/- 10% thick with coupling. Running
6 02060100 500 616.00 At Par 308000.00
G.I. pipes shall have ISI mark Metre
on it and contractor should
submit manufacturer's test
certificate of G.I. pipes.
7 Double Walled Corrugated 02060200 140 Numbers 1795.00 At Par 251300.00
(DWC) HDPE Pipe with
associated collars etc. as per
RDSO Specification No.
RDSO/SPN/204/2011 or latest
anti-rodent & anti-oxidant and
non flame propagating type in 6
meters straight length and of
size 120 mm outer die,& 103.5
mm inner dia. (The
manufacturers, suppliers must
produce valid IS license and
should be certified under ISO
9000 and shall submit copy of
certificate). One of the following
coupling arrangements should
also be supplied with each pipe
as per the site requirement. 1)
Suitable snap fit coupler with
rubber 'O-Ring 2) Spacers 3)
Tees 4) Bend, 5) End-cap (The
total quantity of above items is
equal to no. of pipes supplied.)
DWC pipe shall be marked at
every 1 mtr length in such a way
that manufacturer's name,
vender name and year of
manufacture can be easily
identified.
Road Measuring Cycle, made of
8 Aluminum with 05 digit counter, 02090800 2 Numbers 4396.00 At Par 8792.00
foldable with bag.
Wiring, and installing of Magneto
/DTMF telephone in ASM office,
at locations, Relay Room, Point
locations in both directions, and Per
9 03060300 20 100.00 At Par 2000.00
siding Point Control locations as Telephone
per instructions of Engineer-In-
Charge for traffic purposes, as
per site incharge.
Digging of trench 1.2 M deep
from rail flange/ road level and,
0.3 Mtrs to 0.6 Mtrs wide and
back filling after placing of DWC/
RCC/GI pipe. (Placing of
DWC/RCC/GI pipe coverd
separately).The ballast disturbed
10 be screened and dressed as 04060200 75 cum 300.00 At Par 22500.00
required by Engineer-in-charge
or his representatives and road
tarred immediately. For track
crossing, Drg. No.CSTE/3644
Pg.7 of 11 and for Road
Crossing, Drg. No. CSTE/3644
Pg. 5 of 11 are to be followed.
Digging of cable trench 0.3 Mtrs.
Deep and 0.3 Mtrs. Wide on
Asphalted Platform / Road /
11 Hard rocky area. Refilling with 04060300 20 cum 535.00 At Par 10700.00
earth leveling of trenches &
restoring the original surface of
trenches.
Cutting of Hard rock in trenches
/Preparation of cable way/Chase
150 mm wide at the bottom and
300 mm deep in hard rock ( Drg
prepared by contactor &
approved by Engineer In charge)
for laying of S&T cables where
minimum required depth not
possible & which is verified and
12 agreed by Engineer In charge of 04060500 50 cum 463.00 At Par 23150.00
the work or his reprenstative
shall be made as per Drg. No
RE/S&T/ALD/SK/301/85. refilling
of the same with concrete
mixture of 1:3:6 from top of the
cable way/ chase. Payment of
concrete will be made separately
through a seperate item in the
schedule of work.
Placing of DWC/RCC/GI
pipes/split DWC along with
Running
13 collars in trenches at places of 04060800 1540 31.00 At Par 47740.00
Metre
track and road crossings,
platform cuttings etc.
14 Fixing of GI pipes for crossing 04061000 400 Running 216.00 At Par 86400.00
the culverts, bridges etc. and Metre
concreting of ends with brick
masonry at both ends as per the
instruction of Rly engineer at
site.
Cement concrete work for
miscellaneous items in the ratio
1 : 3 : 6 . Item includes
excavation, ramming, curing and
15 plastering with cement & sand 04062200 10 cum 3656.00 At Par 36560.00
mixture (aggregate not
exceeding 3.8 cm.) (Aggregate
cement & sand to be supplied by
the contractor).
Providing brick masonry in ratio
1:6 cement and mortar including
plastering with 1:4 cement and
sand mixture both sides, 20 mm
thick each with contractor's
16 04062300 10 cum 2005.00 At Par 20050.00
owned class II bricks, including
excavation, curing, grouting,
bolting etc. wherever required.
Bricks sand and cement to be
supplied by the contractor.
Provision of Power supply
arrangement, with contractors
own Generating sets , capacity 5
KVA or above as per
requirement of Station Signalling
17 04100600 100 Per Unit 1135.00 At Par 113500.00
load, for testing of Signalling
system in the case of irregular
Local power supply / under
capacity AT,s supply system at
station.{1 unit=Per Set / day}
Schedule Totals 0.00
Schedule B-Supply & Execution of Non-SOR Items (Item Directory - Not
31161898.00
Applicable)
Supply of Maintenance free VRLA
secondary cells duly charged of
48V 200AH and each 2.0V when
fully charged 200AH capacity
along with accessories i.e. inter
sell connectivity links/float. 4
1 NS 1 2 Set 58559.00 At Par 117118.00
Nos. insulators for each cell 24
Nos. of cell per set as per RDSO
Spec. IRS/S/93/96A with latest
amendments/latest with cubicle
steel/hylem tray battery rack to
install/house batteries.
Supply of 48V, 50A battery
Charger for Teleocm use as per
RDSO/TL/23/99/Ver 4.0 or latest
in N+1 configuration using 3
Modules of 25A with automatic
2 NS 2 2 Numbers 64926.00 At Par 129852.00
switching between the modules
for two sets of 200AH Battery. It
shall be equipped with surge and
lightening protection of Class-B
& C.
Installation, Wiring Testing and
commissioning of Battery
Charger and Maintenance Free
VRLA Battery set at each station.
3 This includes DC Bus bar,Power NS 3 2 Set 2016.00 At Par 4032.00
wire of suitable gauge,
Casing/Caping, and other
materials as per instruction of
Site Engineer.
Supply, Installation, testing and
commissioning of surge
protection cum safety device
(Class B + Class C) suitable for
4 single phase for Telecom NS 4 2 Set 18446.00 At Par 36892.00
Equipment as per RDSO
specification No. RDSO/SPN/TC/
98/2011, Rev. 0 with
Amendment No.1 or latest.
5 Supply of 19"" covered racks, NS 5 4 Numbers 32978.00 At Par 131912.00
Vero President /Rittel make or
similar having the size of
approximately 2.2 meters. (42U)
height X 800mm width x 800mm
depth and duly approved by the
engineer in charge of the work.
The rack shall be complete with
all fittings for housing SDH/MPLS
equipment, primary Muxes, DDF,
MDF using krone module, and
other equipment like runway
ladders, etc. (fan tray, power
supply arrangement 48V, etc.)
completely wired and equipped
with integrated protection
modules for all channels as per
technical specifications and
other stipulations of tender
document. It should be possible
to lock all the equipment with
only order wire telephone
remaining outside the rack.(As
per technical Specifications)
Supply of 2 MB programmable
primary digital drop insert
multiplex as per RDSO Specs.
IRS-TC 68/2012 or latest with
conference facility and other
stipulations of tender documents
fully wired for 30 channels
complete with power supply card
remote control supervision
facility and all other accessories,
installation materials, manuals
etc. it should have facilities to
accommodate data interface
card in multiple drop mode and
should be able to support card
needed for video conferencing
6 NS 6 2 Numbers 158166.00 At Par 316332.00
and ISDN. It shall also support
NMS(Graphical view )operations
from local/remote locations to
be provided in the section and
should be compatible as well as
inter operable at card level of
the equipment provided in the
adjoining section. The above
MUX should be equipped with
following circuits with maximum
E & M cards got approved before
supply. (i) 2 wire/4 wire E & M
VF Circuits (Minimum 4 nos) (ii)
Subscribers loop circuits
(Minimum 4 nos) (iii) Exchange
loop circuits (Minimum 4 nos).
Installation, wiring, testing ,
commissioning of Drop / Insert
Mux with E1 interface cards
connection to 48V bus bar &
termination of VF/Data interface
circuit to the crone MDF in
already installed 42U EURO
Rack. This includes termination
of PVC cable at both ends, and
taking PVC Cable over runway or
on the wall. This also includes
supply of PVC cable of conductor
7 size 0.63 mm. (ii) Testing and NS 7 2 Numbers 19519.00 At Par 39038.00
commissioning of MPLS/STM-4/
D / I Mux Equipment installed
vide item no, above using NMS
as per as per approved test
protocol. The work includes
submission of all technical
documents, manuals. All
miscellaneous items required for
the final testing and
commissioning for the system
will be supplied by the
contractor.
Supply of E-1 branching card
suitable for existing Primary
Digital Mux installed in the
8 NS 8 4 Numbers 5420.00 At Par 21680.00
section as per instructions of
Engineer in charge.{Approval
required before supply}.
9 Supply of Portable NMS NS 9 2 Numbers 97418.00 At Par 194836.00
complete with application
software and all essential
hardware for monitoring of
existing OFC Network (It
includes ALL in one PC,128GB
Pen drive, keyboard, mouse,
SSD Storage facility and other
accessories) as per instructions
of Engineer in charge. {Dell
Inspiron-16/or better}.
Supply of 32 U way U-Link panel
10 with 32 Nos U link connector of NS 10 6 Numbers 1668.00 At Par 10008.00
protel make or similar.
Installation of 32 U way U link
11 panel with U connector as per NS 11 6 Numbers 169.00 At Par 1014.00
engineer In charge.
Supply of Microcontroller based
Quad Cable Conductor's Earth
Resistance Sensing Unit, for 24
12 nos. conductors with metering NS 12 2 Numbers 70664.00 At Par 141328.00
facility for one conductor at a
time.{As per technical
Specification}.
Installation of Microcontroller
based Quad Cable Conductor's
Earth Resistance Sensing Unit,
13 NS 13 2 Numbers 7571.00 At Par 15142.00
for 24 nos. conductors with
metering facility for one
conductor at a time.
VHF Communication system &
Power Supply arrangement at a
14 Station as per View Details At Par 255852.00
RDSO/SPN/TC/73/2008, Ver.-1.0
Or latest.
Supply of SPLIT DWC pipe
confirming to
RDSO/SPN/204/2011 Ver. 1.1 or
latest RDSO specification, Non
metallic, corrugated,
multiwalled, normal duty,
pliable, without protection
15 NS 15 400 Numbers 352.00 At Par 140800.00
against chemical attack and Non
flame propagating in 2 meter
length of size 200 mm outer dia
& 175 mm inner dia. (Permitted
tolerance in dia = +/-2mm)
(TWO half round pipe constitute
one split pipe)
Excavation of trench 300 mm
wide at the bottom and 1.2
meters deep in all types of soils
including clearing of trees,
bushes, etc. and refilling of cable
trench by excavated soil and
ramming after laying of HDPE
DUCT (laying of HDPE/DWC & 6
Quad. cables, PIJF cables, etc.,
will be paid under different items
of the schedule). Where desired
dimensions of trenches cannot
be achieved proportionate
16 NS 16 16560 cum 233.00 At Par 3858480.00
payment will be made as
decided by the Engineer-in-
charge of the Railway at site.
The trenching outside the station
limits I.e. between the home
signal of station 'A' and to home
signal of station 'B' may be done
manually or by machine, as per
the directions of the site in
charge. In no case, the payment
will be made for the trench of
higher dimensions than the
dimensions mentioned above.
17 Manual / Machine horizontal NS 17 4000 Metre 746.00 At Par 2984000.00
auger boring/drilling of 100 mm
dia Horizontal Bore across the
Railway Track/ Across Road at LC
gates/ in the section as per
requirement by Boring method
at a depth of 1.65 mm from the
ground level/ ground level to be
considered ignoring the bank
height of the bank/road etc, as
per the instructions of Engineer
in charge at site/as per Drg No.
RAILTEL/SR/OFC/2008/10 or
latest.
Supply of HDPE Ducts 40/33 mm
dia as per TEC Gr No
G/CDS08/02, Nov-2004 or
RDSO/SPN/TC/45/2013/Rev 2.0
with latest amendments as
available and approved by
18 NS 18 100 Kilometre 48948.00 At Par 4894800.00
Engineer In-charge. Each
km/Bundle of HDPE duct should
have 2 no End Plugs, 2 no Cable
sealing plugs, 2 no plastic
couplers(5-6 thread) slip
fit/push fit type.
Supply of 25 mm dia. HDPE pipe
(TEC spec. No. G/CDS-08/02,
Nov'04 or latest and as per IS
4984 or better specifications)
with accessories on wall or
19 structure/ in the trench, etc. for NS 19 1000 Metre 26.00 At Par 26000.00
drawing of CAT-6/OFC cable/
power cable in the same. All
materials for jointing, fixing,
clamping of HDPE pipe will be
supplied by Contractor.
Supply of 110 mm dia HDPE
20 pipe, {ISI Mark - IS no. NS 20 200 Metre 358.00 At Par 71600.00
4984:2016 or the latest}.
Transportation and Laying of
HDPE pipe as per approved cable
route plan in the excavated
trench, taking due care while
21 transporting and laying the same NS 21 100 Kilometre 6303.00 At Par 630300.00
in the trenches or other
protective works. Both the end
of duct should be sealed with
end plugs before laying.
Blowing of OFC through HDPE
duct & protective work (elicited
in above item) already provided.
Where it is not feasible to blow
OFC due to curves, road/track
crossings, bridges or for any
other reason, OFC shall be
drawn /laid manually as per
standard procedure. All the
22 equipment and machinery NS 22 100 Kilometre 11736.00 At Par 1173600.00
required shall be arranged by
the contractor at his own cost.
In case OFC is to be laid
adopting 'Direct in trench'
method then this item shall be
paid as per accepted rate of item
of this schedule. OFC and HDPE
pipe shall be supplied by the
railway.
Supply and installation of RCC
pre-fabricated OFC jointing Pits
as per DRG. No-
23 RDSO/TCDO/COP-21 (a)/ latest. NS 23 20 Numbers 5332.00 At Par 106640.00
The material shall be supplied as
per the instructions of engineer
in charge.
Supply of Straight Joint
Enclosures (SJC) complete with
all accessories as per
GR/OJC/02/02 Sept 2003 for 48
fiber, Raychem make model
FOSC 400 B4 48F or RSICS
24 NS 24 50 Numbers 3881.00 At Par 194050.00
make model 1500-L 183-XX or
Birla VXL make model VT-200 or
3 M make model 2179 CS or
TYCO make or better as per
instruction and approval of
Engineer In charge.
25 Preparation, splicing, making NS 25 50 Numbers 6388.00 At Par 319400.00
and installation of OFC 48 F
straight through joints with
enclosure/LIU termination.
Splicing should be done by
trained person, the losses shall
not exceed beyond the
prescribed limit. If losses exceed
the prescribed limit, the
contractor have to re-splice free
of cost.
Supply and installation of rack
mountable LIU along with all
accessories suitable for mono
mode 48 fiber complete. LIU
supplied should be of slider type
26 NS 26 6 Numbers 5801.00 At Par 34806.00
and as per instruction of the Site
engineer.(Compliant to 96 fibers
complete along with Euro
adopters, pigtail, and other
accessories etc.)
Supply of Patch Cord cable (10
m long with FC-PC/LC-FC/SC-
SC/LC-SC/LC-LC/ST-SC as per
27 NS 27 20 Numbers 609.00 At Par 12180.00
site requirement) as per
RDSO/SPN/TC/69/2007 rev 0 or
at the latest.
End to end testing of all fiber of
the optical fibre cable laid under
above items between
Station/Cable Huts/OC & other
locations.All required
equipments, tools and plants
shall be arranged by the
28 NS 28 4 Numbers 13651.00 At Par 54604.00
contractor. Five number of print
out of traces in folders of OFC
parameters/ results, The per
kilometer link loss shall be as
per the policy/technical circulars
issued by the railways from time
to time.
Transportation and laying of 6
Quad/PIJF cables in Trenches/ GI
pipe/RCC pipe/DWC pipe,
29 NS 29 25 Kilometre 4802.00 At Par 120050.00
Trunking etc as per approved
cable route Plan and instruction
of Site Engineer.
Supply of Thermo shrinkable
joint kit as per RDSO spec no.
IRS TC 77/2010 Rev-2 or the
latest suitable for 2T joint RTSF3
suitable to the 6-quad cable of
spec no. IRS TC30/2005, Ver-1,
30 NS 30 50 Numbers 2993.00 At Par 149650.00
Amd-4 or latest, With VF tapping
transformer (RDSO
spec.IRS:TC:76/2000 with
amendment 1).{Item shall be
procured from RDSO approved
venders only}.
Execution of
Straight/Derivation/EC Joint on
31 NS 31 50 Numbers 1060.00 At Par 53000.00
Quad/PIJF Cables as per
instruction by site engineer.
Supply of VF tapping
transformer as per RDSO spec
IRS TC 76/2000 with amd 1 or
32 latest suitable for underground NS 32 30 Numbers 1279.00 At Par 38370.00
quad cable circuits, magneto
tele, emergency circuits.
{Impendence- 470:1120}.
Supply of VF tapping
transformer as per RDSO spec
IRS TC 76/2000 with amd 1 or
33 latest suitable for underground NS 33 50 Numbers 1062.00 At Par 53100.00
quad cable circuits, magneto
tele, emergency circuits.
{Impedance-470:600}.
Supply of Emergency control
socket box (EC Socket box) FRP
Material without socket as per
RDSO/SPN/44/2002 ver.2 with
34 NS 34 35 Numbers 3192.00 At Par 111720.00
Amendment no. 02 or the latest
amendment. {Material should be
procured through RDSO
approved source only}.
35 Supply of 6 pin Emergency plug NS 35 35 Numbers 553.00 At Par 19355.00
and socket flat type as per
specification IRS:TC/42/87 or
latest.{Material procured
through RDSO approved source
only}.
Fabrication of EC socket box
assembly and erection of
fabricated assembly at the
location indicated in the route
plan and as per direction of
Engineer in-charge. This includes
cutting of rails/Post to the
required size, supply and
welding of GI Pipe and base
plate
(DRM/S&T/RTM/2007/1/latest/as
per site In charge), fixing of EC
socket box, transportation of
material to site, digging of pit
and erection of whole assembly
at site. The work also includes
36 the termination of 6 Quad/PIJF NS 36 35 Numbers 3288.00 At Par 115080.00
cable on the strips of 6-pin EC
socket inside box. The
fabrication of EC Socket box
shall be done as per Drg.
No.SK/CSTE/C/97/16 &
SK/CSTE/C/97/20 or drawing
provided by engineer in charge.
Note - In addition to the above,
the centrepins of EC sockets
shall be terminated with a
dedicated pair of 6 Quad cables
(Derivate through the tail PIJF
cable) in the entire block section
so as to provide magneto/auto
telephone communication from
each EC socket.
Painting of emergency socket
assembly, and rail/ post by
supplying one coat of red-oxide
37 as base colour and then painting NS 37 35 Numbers 701.00 At Par 24535.00
the assembly as per zebra
painting in black and white
colours of 150 mm width.
Supply of 4/2 wire Emergency
portable control telephone IRS
TC: 03 TC-75/99 with
38 amendment 1 & 2 or latest along NS 38 2 Numbers 2649.00 At Par 5298.00
with standard length line cord
and 6 pin plug as per RDSO
Spec no. IRS TC 42/87 or latest.
Supply, fixing, painting, and
installation of RCC cable route
marker "TELECOM" engraved
and painted on both sides along
39 the route at every 50 m and NS 39 1000 Numbers 382.00 At Par 382000.00
route diversion as per
DRG.NO.RDSO/TCDO/COP-22
(a) / as per direction of site in
charge.
Cable Route Survey &
Preparation of as built final
Cable Route Plan and other Plans
(for OFC as well as other Telcom
cables) on Auto cad for the
whole section. Initially One set
will be supplied by contractor
after joint survey, which will be
approved by Site Engineer of
Railway. It includes changes
during execution which shall be
incorporate in the same set.
40 NS 40 50 Kilometre 1007.00 At Par 50350.00
After execution of work and
approval from site Engineer after
all changes, all plans/documents
on tracing paper along with Six
prints of cable route plan .
Jointing and splicing schedule,
cable hut wiring diagram etc. in
good quality folder shall be
supplied by contractor. The
contractor shall also supply the
auto cad documents in CD/pen
drive.
Supply of Maintenance Free
Earth as per RDSO/SPN/197/
2008 or latest consisting of- (1)
Copper bond steel electrode 3
Mtr long 17mm dia with copper
bonding thickness of min. 250
micron & UL listed & marked-01
No. (2) Earth enhancement
compound RDSO Approved in a
sealed bag of 10 Kgs - 03 No.(3)
Copper strip 150 x 25 x 6mm -
01 No.(4) Copper strip 200 x 25
x 6mm - 01 No. (5) Copper strip
300 x 25 x 6mm - 01 No. (6) 35
41 NS 41 20 Set 14071.00 At Par 281420.00
Sqmm Copper Cable to connect
earth electrode to MEEB in
duplicate - 10 Mtr Approx. (7)
16Sqmm multistrand single core
PVC insulated copper cables to
connect MEEB to SEEB & SPD -
Min 10m(8) 10Sqmm
multistrand single core PVC
insulated copper cable to
connect various equipment to
SEEB (9) Cu Lugs (10) Earth
Encloser RCC/FRP/PVC of
suitable size as per instruction of
the Engineer In-charge.
Installation of Maintenance free
42 Earth Electrode as per NS 42 20 Numbers 5445.00 At Par 108900.00
RDSO/SPN/197/2008 or Latest.
Supply of Automatic fusion
splicer fully automatic RTC
microprocessor controlled (Arc
fusion type) splicer with video
display, warm image processing,
heat oven, fiber fixture , battery
backup , high precision fiber
cleaver, stripping tool and other
43 accessories of fuzikura 88 NS 43 1 Numbers 421253.00 At Par 421253.00
S/Fuzitsu/Siemens/better along
with sufficient no. of splice
protection sleeves and isopropyl
alcohol to be supplied for test
splice.{Compliant to TEC
specification No. TEC
GR/TX/OSM-001/04 Sept., 2012
or latest with all accessories}.
Supply of OTDR suitable for
1310/1550 nm fiber with a
resolution of 60 cm or better,
dynamic range of 41/40 db with
all accessories, AC Adopter/
Charger, Rechargeable battery,
Manual, hard & soft carrying
case, VFL Facility, internal
memory, USB /Ethernet facility,
44 compatible with LC, FC, SC, etc. NS 44 1 Numbers 310307.00 At Par 310307.00
Make- Yokogawa model AQ121
or better.{Compliant to TEC
specification No. GR/TX/OTD-
01/04 APR-2010 with latest
amendments in force at the time
of tender opening with all
accessories. Authorized dealer
certificate required along with
equipment}.
Supply of Optical Power Meter
suitable for testing of
Fiber,850/1310/1550nm
calibrated wavelength, single &
multimode operation,
measurement range
+3dBm/better, 0.01 dB
45 NS 45 1 Numbers 40789.00 At Par 40789.00
resolution, NIST traceable,
Germanium Zeo/Set Ref, CE
certified,270 Hz, 1 kHz, 2 kHz
Tone identification as approved
by site in charge.{Make-OLP-
35V2 JDSU/latest, EXFO or
better}.
46 Supply of OFC Maintenance tool NS 46 1 Set 135513.00 At Par 135513.00
kit Compliant to TEC Spec No-
G/OMS/01/01 April 94 or latest.
One set consisting of the
following- (1)
Philips/Flike/CICO/Motwani
Digital Multimeter 4-1/2 digit
with LCD display- (1 No). (2)
Rotary duct cutter for cutting
ducts(with replaceable blade) -
(2 No). (3) Utility Knife -(2 No).
(4) Cable slitter -(1 No). (5)
Tubing cutter for cable armour -
(1 No) (6) Bare fibre adaptor -(1
No) (7) Miller/Fujikura/proskit
high precision stripper for fibre
buffer -(3 No) (8) Pocket cleaver
Fujikura (CT -08) -(1 No) (9)
Mechanical splice joint set (1 set
consisting of 6 nos.) (10)
Ceramic scissor CSI -(2 No) (11)
LC,FC & SC adopter with 0 dB
loss -(25 No) (12) Optical fibre
terminal V groove -(2 No) (13)
Earth resistance measuring
instruments with all accessories
range 0.1 to 10 Ohm (14)
Megger (A) 500V-1 No, (B) 100V
-(1 No) (15) Loose tube stripper
-(1 No) (16) Cord stripping plier
-(1 No) (17) Krone Tool -(1 No)
(18) Isopropyl Alcohol - (1 L)
(19) Napkin- (500 No) (20) LC &
SC attenuator with 5/10dB loss -
[(40 No (20 -20 each)] (21)
Laser Distance Meter 50 m
Range- (01 No) (22) Visual Fault
Locator pen type (range-30 km)-
(01 No) (23) Fiber Protection
Sleeves, 60/40 Mm-(200/200 No
each) (24) LC to LC Connector-
20 No. (25) LAN Tester- 1 Set.
Supply of Digital Transmission
Measuring Set Kit
APLAB/AnuVidyut Make
47 complete with Tone Generator & NS 47 1 Numbers 27658.00 At Par 27658.00
DB Meter specification no IRS TC
43-87 with amendment no 1 or
latest (Approved by Site Engg).
Supply of Cross Talk
Measurement Set as per IRS:TC
48 45-88 with latest Amd .Make NS 48 1 Numbers 26290.00 At Par 26290.00
Anuvidyut/Aplab or similar and
approved by site in charge.
Supply of Digital Earth
Resistance tester three-terminal
type with LED display, 1999
49 NS 49 2 Numbers 13673.00 At Par 27346.00
count, KOICO model 5600 or
any reputed make approved by
engineer in-charge.
Supply of Cable Route
Locator/Tracer set suitable for
detecting underground armored,
Telecom, Power, and signaling
Cables with LCD graphics,
Display active/passive modes,
and depth range and technical
50 specification of Model RD- NS 50 1 Numbers 521915.00 At Par 521915.00
8200G/latest or MTR-700/latest
or superior as per approved by
the Engineer In charge. {It must
have-In a built rechargeable Li-
ion battery cum charging facility
for both transmitter & receiver
along with other accessories}.
Supply of Cable fault locator
with low insulation meter for
cable testing of cable fault
location in telecom twisted 6
51 NS 51 1 Numbers 153840.00 At Par 153840.00
Quad cable, Railway signalling
cable power cable up to 20 km.
Make Radio detection, MTR or
3M or Similar.
52 Supply of Tool kit for telecom NS 52 1 Set 13312.00 At Par 13312.00
maintenance with a small size
canvas bag with the following
items:- (1) Combination Plier 8".
(2) Long Nose Plier (Round
nose) 6", (3) Wire Striper Plier
6", (4) Screw Driver set ( 5
pieces), (5) Hexa with frame
12", (6) Double Open-end D
spanner set ( 6 to 32 mm), (7)
Adjustable Spanner set 8", (8)
Ball pin Hammer (200 gm), (9)
Side Cutting Plier 6", (10)
Soldring iron (Soldron make or
similar) (11) Torch cell LED (
3cell) (Eveready, Geep or
similar), (12) Auto Ranging
Digital Multimeter (
Mecco/Rishabh or similar ) (13)
Krone Tool (Krone make or
similar) (14) Wago Slotted
Screwdriver, Insertion &
Extraction Tool-1 Set. (15)
HDMI,RJ 11 & RJ45 Cable
Continuity Tester- 01 Set. (16)
Quad/PIJF cable Cable
Continuity Tester/ buzzer- 02 no.
(17) Drill Machine-( Lithium-ion
Impact Drill Cordless 18+1+1
Torque Settings)-01 (18)
wrapping tool- 04 All Tool items
1 to 9 of Taparia/Godrj/Jhalani
make or similar .
Supply of Multi Telephone Way
station Equipment with
necessary mounting
arrangement on composite rack
or on wall. It shall be 48 Volt
operated and shall have a
53 NS 53 4 Numbers 59516.00 At Par 238064.00
provision to connect at least four
station telephones and have a
facility to give more connection.
As per RDSO Specification no.
RDSO/SPN/TC/66/2007 or latest
1 & 2.
Installation, wiring testing and
commissioning of MTWE
54 NS 54 4 Numbers 2695.00 At Par 10780.00
equipment and telephone on the
rack as per Engineer in-charge.
Supply of 2 wire Push Button
Telephones with CLI suitable for
connecting the way side
equipment and the system
55 mentioned above as per NS 55 20 Numbers 616.00 At Par 12320.00
DOT/TEC specifications
TEC/GR/CP/Tele/002/05 2010
with latest Amd & from DOT/TEC
approved sources.
Installation of DTMF/way side
Telephone in all stations, LC
Gate, SP,SSP, & TSS. This
56 includes supply and fixing of DP, NS 56 20 Set 79.00 At Par 1580.00
PVC Channel, Telephone Bracket
and laying/Termination of
Switchboard Cable etc.
Supply of PVC Switchboard
Cable 10 Pair twisted conductor
of size 0.63mm or 0.5mm dia
57 annealed copper conforming to NS 57 500 Metre 41.00 At Par 20500.00
TEC spec no GR-WIR-06/03 Mar-
02 or latest and as per
instruction of site in charge.
58 Supply and fixing of PVC conduit NS 58 6000 Metre 22.00 At Par 132000.00
pipe 25 mm with accessories
such as bend, tee, upling, elbow,
saddle, clamp, screw,PVC/
wooden plugs etc. on walls,
angle or on rail of
platformshelter etc. MS clamp
made of 3 mm MS flat to be
manufactured and supplied and
fixed to clamp the PVC pipe or
angle/ rail run of platform
shelter. The clamp should be
painted with red oxide primer
over which two coats of
aluminium paint to be given.
Where ever necessary jumper
holes to be made in wall and
above PVC pipe threaded and
wall to be repaired to its original
condition.
Supply and fixing 20 pairs
metallic DP box with locking
59 arrangement's, krone/ wago NS 59 4 Numbers 3365.00 At Par 13460.00
frame /modules along with other
accessories.
Supply, Installation, Testing, and
Commissioning of GPS-based
double-faced platform Clock as
per RDSO/SPN/TC /62 / 2008
60 Rev.3 Amd 1 &2.0 or latest along NS 60 4 Numbers 46152.00 At Par 184608.00
with required SMPS charger and
battery Backup of at least 180
Mins, along with other
accessories.
Supply of Universal Fare Display
System with Power, Data Cable
61 &Connectors for PRS/UTS/Thin NS 61 4 Numbers 4719.00 At Par 18876.00
Client as per given Technical
Specifications.
Installation testing and
commissioning of Universal Fare
Display System for
62 NS 62 4 Numbers 303.00 At Par 1212.00
PRS/UTS/Thin Client with all
required accessories and
configurations.
Supply and Installation of face to
face enquiry system consisting
of an attendant unit, a customer
unit and a power supply unit
63 NS 63 4 Numbers 7409.00 At Par 29636.00
which are easy to install and
through dedicated cables as
supplied with system. Make-
Ahuja CCS 2300 or better.
Supply of Microphone with chord
and other accessories with
64 Microphone stand confirming to NS 64 2 Set 2795.00 At Par 5590.00
RDSO/SPN/TC/63/2006 Rev 0.0
or latest
Supply of Waterproof PA Horn
speaker 30 watt as per clause
No 4.5 of RDSO Specification
No.RDSO/SPN/TC/63/2006 Rev
65 NS 65 20 Numbers 967.00 At Par 19340.00
0.0 or latest. Make reputed as
LBD 8347, 8308 of Philips make,
UHC30XT of Ahuja make or
similar.
Supply of 15 Watts Column
speaker with 100V Line Matching
transformer as per clause No 4.6
66 NS 66 4 Numbers 876.00 At Par 3504.00
of RDSO specification No.
RDSO/SPN/TC/ 63/2006 Rev 0.0
or latest.
Installation Testing and
commissioning of different type
of speakers with hanging
67 NS 67 24 Numbers 672.00 At Par 16128.00
arrangements and clamps on
cover shed/poles as per
directions of Field Engineer.
Supply, Installation, Testing and
commissioning of Power
Amplifier set of 240 Watt, 230V
AC/24V DC confirming to
68 RDSO/SPN/TC/63/2006 Rev 0.0 NS 68 2 Set 12408.00 At Par 24816.00
or latest amd. Ahuja or similar
make complete with one set of
Microphone, Cord and Stand
along with other accessories.
Supply of Twin Core shielded
cable of size 24/36 SWG with
standard colour (Red and Black)
69 having screening coverage of 95 NS 69 1000 Metre 41.00 At Par 41000.00
% area of the sheath of the
cable using braided copper
conductor.
Supply of 19''- 24U Dust proof
Cabinet along with Front Glass
Door, Key locking at Front and
Rear Door, Horizontal/Vertical
Shelf arrangement, Termination
70 Panel & Fan Cooling NS 70 2 Numbers 35772.00 At Par 71544.00
arrangements as per instruction
of Site Engineer for Housing of
Various S&T equipment like PA
System, Router, Switches,
Modem, E1/LAN Extender etc.
Supply of self supported
aluminium flat step ladder
(conforming to ISI) 10 ft.
height. Ladder should be self
71 NS 71 2 Numbers 5048.00 At Par 10096.00
supported and it should be made
up of rust proof Aluminum of Min
16 SWG. No plastic hinges/Step
support should be used.
Supply of PVC Insulated flexible
3 CoreX2.5 sq mm multistrand
Power Cable as per specification
72 no IS:694:1990 realfirmed 1995 NS 72 2000 Metre 53.00 At Par 106000.00
or latest suitable for RE area and
of reputed make like Delton,
LAPP, Finolex, or similar.
Laying of power cable through
one inch dia PVC conduit
pipe/HDPE pipe from centralized
control console unit to LED
based Train Indication Board,
Coach Guidance Boards etc
inside platform shelter area and
outside platform shelter area.
73 NS 73 2000 Metre 24.00 At Par 48000.00
On the platform shelter with
adequate protective measures.
The rate includes laying and
installation/clamping charges of
PVC pipe/HDPE pipe with
protective arrangements in
addition to laying of power
cable.
Supply, Installation, testing and
Commissioning of online UPS 5
KVA, with battery back up of
74 NS 74 1 Numbers 141159.00 At Par 141159.00
minimum 4 hours, with battery
trolley, of reputed make as
APC/Uniline etc. or similar.
Supply , testing and
commissioning of 1 KVA online
75 NS 75 6 Numbers 21294.00 At Par 127764.00
UPS with 1 hour backup. Make
APC or similar.
Supply of Electric Board with
following accessories- (i) Fuse
Indicator-01 No.(ii)Fuse-01 No.
(iii)Three Nos of 3 Pin socket
76 NS 76 10 Numbers 257.00 At Par 2570.00
(Male & Female) of 5 Ampere
with ON-OFF Switch.(iv) One No
of Power Socket.(v)Five meter
Long Power Cable.
Supply of UTP CAT-6 Cable of
DAX, Nortal, Amp, Molexor,
Lucent or similar with
77 identification marker/ferrules. NS 77 3000 Metre 18.00 At Par 54000.00
The CAT-6 cable should be
compliant with TIA/EIA-568B or
the latest standards.
Laying of STP/UTP CAT-6 cable
through PVC pipe/Casing
78 capping and termination, fixing NS 78 3000 Metre 48.00 At Par 144000.00
of RJ-45 Connector as per
instruction of Site In charge.
Supply and Installation of RJ-45
patch cord, seven feet long, of
79 reputed make like Molex or NS 79 10 Numbers 148.00 At Par 1480.00
similar, with 02 no. of RJ-45
connectors for every patch cord.
Supply of RJ45 Connector D-link
80 or DAX make as per instructions NS 80 100 Numbers 7.00 At Par 700.00
of Engineer in charge.
81 Supply of 2 LAN/4 WAN Port, 2 NS 81 2 Numbers 64096.00 At Par 128192.00
Mbps Router, WAN should be
G.703 E1 supported /as per
RDSO/SPN/TC/84/2008 Rev.0
with required cable and
connectors along with other
accessories.
Supply of 8 port Gigabit Lite
Managed PoE Layer 2 Switch
supports 8 Nos 10/100/ 1000
BASE-T ports, along with 2
82 NS 82 4 Numbers 11284.00 At Par 45136.00
Gigabit SFP ports, green-saving
technologies, make model DG-
GS1510HPL,DIGISOL / CISCO/
JUNIPER or superior.
Supply, Installation, Testing, and
commissioning of 24 port
managed POE Layer 2 Access
83 network switch as per RDSO NS 83 2 Numbers 46086.00 At Par 92172.00
SPECIFICATION-
RDSO/SPN/TC/83/2020 Rev 2.0
or latest.
Supply of 6-Core Un Armoured
84 Single Mode OFC Cable as per NS 84 1 Kilometre 10375.00 At Par 10375.00
IRS TC-55/2006 Rev 1 or latest.
Laying of Arial OFC cable/CAT-6
cable through PVC pipe/Casing
85 capping and termination in LIU & NS 85 1000 Metre 23.00 At Par 23000.00
FDMS as per instruction of Site
In charge.
Supply of 6 core fiber
termination box with Capacity of
86 NS 86 2 Numbers 167.00 At Par 334.00
6ports, Suitable Adapter- SC/LC
or as per site requirement.
Supply of optical Patch cord
cable (3 Meter long with
connectors) asper RDSO specs
87 NS 87 10 Numbers 289.00 At Par 2890.00
no. RDSO/SPN/TC/69/2007 or
latest. Type of connector will be
decided as per site requirement.
Supply and installation of rack
mountable LIU along with all
accessories suitable for 24 F
88 NS 88 4 Numbers 5326.00 At Par 21304.00
mono mode fibre. LIU supplied
should be of slider type and as
per instruction of Site engineer.
Supply and Fixing on wall with
the help of Farse nut of 12 U
Networking Rack 19" with Front
89 Glass Door, 06 Socket Power DB, NS 89 6 Numbers 7661.00 At Par 45966.00
02 Fan-Fan Tray, Cable Manager
,Hardware Packet ,Earthing etc.
Make -APW-President or similar.
Supply of Krone Tool with test
90 NS 90 2 Numbers 1773.00 At Par 3546.00
jack " KRONE MAKE".
Supply of UTP cable crimping
91 tool as per direction of engineer NS 91 656 Numbers 2.00 At Par 1312.00
In charge.
92 Supply of Central Data Controller NS 92 1 Set 445191.00 At Par 445191.00
Unit conforming to system
requirement as per
RDSO/SPN/TC/108/2019 ver 1.0
or latest. The Control Console
shall have Main and standby CPU
to work in stand by mode, one
no UPS of 1 KVA with two
independent batteries, Two LCD
Monitor (19"), CCU Rack, KVM
Switch, CDS(Layer 3-12 port
Switch of make CISCO, HP,
Juniper, Brocade, Avaya,
Extreme, Netgear, D-link) and
other accessories, housed in a
standard size cabinet along with
driving software for IPIS as per
RDSO specifications. This also
includes supply and installation
of SW for Announcement system
with necessary interface and
announcement recording
(Hindi/English/local) fresh studio
copy of voice files.) as per RDSO
Specification No.
RDSO/SPN/TC/108/2019 Ver.1.0
or latest (the same to be
interfaced with existing audio
and video system installed at the
station)the software should
support all types of
display/announcement by
merely adding necessary
hardware in future
(single/multiline arrival /
departure train information
display boards. (single
sided/double sided), CGDB,
AGDB, LCD/LED/Plasma TVs etc.
Installation, testing and
commissioning of CDC set as per
93 RDSO Specification No- NS 93 1 Set 11674.00 At Par 11674.00
RDSO/SPN/TC/108/2019 Ver-1.0
or latest.
Supply of Platform Data
Controller (PDC) conforming to
System requirement of
RDSO/SPN/TC/108/2019 Ver
1.0. or latest. It consists of 8
Ethernet port and 8 serial port
for field device 4 and 2 SFP
94 NS 94 2 Numbers 48770.00 At Par 97540.00
optical port to connectivity with
CDC. Optical ports are used
whether the distance between
PDC & CDC is more than 80
meters as
RDSO/SPN/TC/108/2019 ver 1.0
or latest.
Installation, testing and
commissioning of PDC as per
95 NS 95 2 Numbers 3916.00 At Par 7832.00
RDSO/SPN/TC/108/2019 ver 1.0
or latest.
Supply of Double Face Coach
Guidance Display Board with
necessary accessories
96 confirming to system NS 96 50 Numbers 26888.00 At Par 1344400.00
requirement as per
RDSO/SPN/TC/108/2019 ver 1.0
or latest.
Installation, Testing and
Commissioning of Double Faced
Coach Guidance Display Boards
97 in Covered area with complete NS 97 30 Numbers 2925.00 At Par 87750.00
accessories as per
RDSO/SPN/TC/108/2019 ver.1.0
or latest.
Installation, Testing and
Commissioning of Double Faced
Coach Guidance Display Boards
98 in Open area with complete NS 98 20 Numbers 5820.00 At Par 116400.00
accessories as per
RDSO/SPN/TC/108/2019 Ver.1.0
or latest.
Supply of Single Line Double
face Platform Display Boards
with all accessories as per RDSO
99 specification no RDSO NS 99 2 Numbers 212866.00 At Par 425732.00
Specification No.
RDSO/SPN/TC/108/2019 Ver.1.0
or latest.
Installation, Testing &
commissioning of Single Line
Double face Platform Display
100 NS 100 2 Numbers 10577.00 At Par 21154.00
Boards with all accessories as
per RDSO/SPN/TC/108/2019
Ver.1.0 or latest.
Supply of True color Indoor
Video Display (IVD),Pixel
Resolution (W x H)- 432x128 as
101 NS 101 1 Numbers 2332507.00 At Par 2332507.00
per technical specification of
RDSO/SPN/TC/108/2019 Ver-1
or latest.
102 Installation, Testing and NS 102 1 Numbers 86067.00 At Par 86067.00
commissioning of True Color
Video Display (IVD),Pixel
Resolution (W x H)- 432x128 as
per RDSO/SPN/TC/108/2019
Ver-1 or latest, along with other
accessories and as per direction.
Supply of True color Outdoor
Video Display (OVD) of Pixel
Resolution (W x H)- 432x128 (6-
103 NS 103 1 Numbers 2384614.00 At Par 2384614.00
line).Technical Specification as
per RDSO/SPN/TC/108/2019
Ver-1 or latest.
Installation, Testing and
Commissioning of True color
Outdoor Video Display (O V D)
of Pixel Resolution (W x
H)-432x128 (6-line) with
104 NS 104 1 Numbers 178846.00 At Par 178846.00
required Mechanical Structure
and other accessories, as per
site condition and as per
RDSO/SPN/TC/108/2019 Ver-1
or latest, as per direction.
Supply of Standard 19" Rack
Mountable LER (Label Edge
Router) , IP- MPLS Router with
Redundant DC power feed-48V
DC nominal, equipped with
interfaces: 2 x 10G (optical)
SFP+ Ports along with 2 nos. of
10G single mode Bi-directional
SFP 40 Kms + LC Modules, 4 x
1GbE (Optical) interface along
with 4 Nos of 1GbE Single Mode
105 NS 105 2 Numbers 396833.00 At Par 793666.00
SFP 10km Modules and 4 x 1GbE
(Copper) interfaces & Modules
and slot for 16 x E1 (G.703),
{supply of 16 E1 card is not
included in this item and is
catered in separate item},
Mounting kit with all necessary
accessories & Software,
Perpetual Licenses. As Per RDSO
Document No-STT/TAN/IP-
MPLS/2020 Version 02 or latest.
Installation, Commissioning &
Testing of LER & LSR IP MPLS
Routers which includes supply &
Installation of all other
accessories like Power cable,
Earthing Cable, Optical Patch
106 Cords of 3 Mtr- (6 Nos) for LERs NS 106 2 Numbers 13044.00 At Par 26088.00
& (10 Nos) for LSRs, Cat 6 Patch
Cords of 1 Mtr -(4 Nos) , One
16/6A MCB for each LER and
LSR , wiring material etc. as
required for Routers as per site
In charge.
Supply and installation of 16
port E1 Card along with Patch
panel/Krone Module and wiring
107 for Routers along with all NS 107 2 Numbers 108851.00 At Par 217702.00
accessories etc. As Per RDSO
Document No- STT/TAN/IP-
MPLS/2020 Version 02. or latest.
Supply of 8 Port FXS Gateway
(DC or AC based as per site
requirement) including mounting
108 NS 108 2 Numbers 23647.00 At Par 47294.00
kit and all other accessories. Its
standard installation would be as
per technical specifications.
Training of Personnel over and
above the On-Site Training,
During the Installation,
Maintenance, and Supervision Man-
109 NS 109 2 23350.00 At Par 46700.00
period as per detailed document. Week
{Man-Week-One week training
for one personnel or as desired
by Railways}.
Supply and Installation of 2 x
STM 1 Adapter Interface with 2
110 NS 110 2 Numbers 280547.00 At Par 561094.00
Nos. of STM-1, 15 km SFP
modules for LER Routers.
Supply of STM-1 SFP Module
111 with 15 km range, along with all NS 111 2 Numbers 10035.00 At Par 20070.00
accessories for above routers.
Supply of 10/100/1000 Base-T
Copper Ethernet Transceiver SFP
Module with all accessories. The
make of the modules shall be
112 the same as that of the above NS 112 4 Numbers 5987.00 At Par 23948.00
LER to ensure reliable
functioning and the same shall
be supplied with all the
accessories.
Supply, Installation, testing and
Commissioning for 4 Port
Gateway to support 4 Port
Concurrent Emergency
Communication at HQ/Way
station to support 4 wire ports/
113 NS 113 2 Numbers 18333.00 At Par 36666.00
4 Port Gateway with built in 2
wires to 4 wire Hybrid convertor
to support 4 wire output as Per
Clause-13 of
RDSO/SPN/TC/99/2012 Rev.2 or
latest.
Supply of IP phone as per
specification attached,
114 Compatible with Systems NS 114 4 Numbers 11328.00 At Par 45312.00
.Accepted make/Brand - Fanvil
or similar.
Hiring of one non-AC SUV/MUV
vehicle for Officer (up to 2500
kms) Innova/Hexa or similar
type of vehicle including
115 NS 115 6 Month 53933.00 At Par 323598.00
maintenance, major minor
repairs, cost of lubrication, fuel,
drivers and all other ancillary
costa etc. complete.
Hiring of one non-AC pick up
vehicle for Supervisors (up to
2000 kms per month)
Tata/Mahindra or similar type of
116 vehicle including maintenance, NS 116 12 Month 43146.00 At Par 517752.00
major minor repairs, cost of
lubrication, fuel, drivers and all
other ancillary cost etc.
complete.
Schedule Totals 0.00
Item Breakup
Schedule B-Supply & Execution of Non-SOR Items
Item - VHF Communication system & Power Supply arrangement at a Station as per RDSO/SPN/TC/73/2008, Ver.-1.0 Or
14 latest.
2 2 Power Supply SMPS (12V/15A DC)- {01 Number}. Numbers 2 4507.00 9014.00
Total 255852.00