Scribd
Upload
31 views3 pages

WuhanHTDP HDatasheet

The HTDP-H VLF Hipot Test Set is an ultra low frequency high voltage generator that utilizes advanced digital frequency conversion technology and microcomputer control for enhanced performance and safety. It features multiple models with varying output voltages and frequencies, and is designed to meet technical standards for power equipment testing. Key features include accurate data measurement, overvoltage and overcurrent protection, and a compact design for ease of use.

Uploaded by

duonglt0102
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
31 views3 pages

WuhanHTDP HDatasheet

The HTDP-H VLF Hipot Test Set is an ultra low frequency high voltage generator that utilizes advanced digital frequency conversion technology and microcomputer control for enhanced performance and safety. It features multiple models with varying output voltages and frequencies, and is designed to meet technical standards for power equipment testing. Key features include accurate data measurement, overvoltage and overcurrent protection, and a compact design for ease of use.

Uploaded by

duonglt0102
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

HTDP-H VLF Hipot Test Set

Product Introduction
Ultra low frequency high voltage generator combines modern digital frequency conversion
advanced technology, fully controlled by microcomputer control, boost, step-down,
measurement, protection, and manual intervention in the automatic boost process. Because it is
fully electronic, it is small in size and light in weight, large screen LCD display, clear and
intuitive, and printer output test report. The design indicators are in full compliance with the
"General Technical Conditions for Power Equipment Special Test Instruments, Part 4: General
Technical Conditions for Ultra Low Frequency High Voltage Generators", which is very
convenient to use. At present, both domestic and foreign methods use mechanical methods for
modulation and demodulation to produce ultra-low frequency signals. Therefore, there are
sinusoidal waveforms that are not standard, measurement errors are large, sparks are discharged
in high voltage parts, equipment is cumbersome, and the second and fourth quadrants of sine
waves are also needed. The high-power high-voltage resistor performs discharge shaping, so the
overall power consumption of the device is large. Ultra low frequency high voltage generator can
overcome such shortcomings.
Product nickname: Ultra low frequency high voltage generator, 0.1Hz Ultra low frequency high
voltage generator, ultra low frequency AC high voltage generator, ultra low frequency AC
voltage test device
Product Parameters
model HTDP-50H HTDP-30H HTDP-80H
Output rated voltage 50kV(Peak) 30kV(Peak) 80kV(Peak)
Output frequency 0.1Hz,0.05Hz,0.02Hz
Load capacity 0.1Hz：≤0.5μF 0.1Hz：≤1.1μF 0.1Hz：≤0.5μF
0.05Hz：≤1.1μF 0.05Hz：≤2.2μF 0.05Hz：≤1.1μF
0.02Hz：≤2.5μF 0.02Hz：≤5.5μF 0.02Hz：≤2.5μF
measurement ±（3% full scale+0.5kV）
accuracy
Voltage waveform ≤5%
distortion
power supplyFuse 20A 10A 25A
Weight Controller：6kg
Boost body：50kg Boost body：30kg
Boost body I：30kg
，Boost body II：
50kg
Conditions of Use temperature：-10℃∽+40℃；humidity：≤85%RH
power supply Exchange 50 Hz，220V ±5%
use Cable for the For 10kV and below For cables of 35kV
corresponding cables, generator and below,
voltage, generator generator

Product features
1, current, voltage data are directly obtained through high-voltage side sampling, so the data is
true and accurate
2, overvoltage protection: When the output exceeds the set pressure limit value, the instrument
will stop protection, the action time is less than 20ms
3, over-current protection: designed for high and low voltage double protection, the high-voltage
side can be precisely stopped according to the set value; the low-voltage side of the current will
exceed the rated current will be shutdown protection, the action time is less than 20ms
4, the high-voltage output protection resistor is designed in the Boost body, so there is no need to
connect another protection resistor
5, due to the use of high and low voltage closed-loop negative feedback control circuit, so the
output has no capacity rise effect

You might also like