Quick Installation Guide
Wireless Dual-Band Router
Power adapter
Important
Set up with videos:
Scan the QR code or visit
Unplug your modem, and remove
https://www.tp-link.com/support/setup-video/#wi-fi-routers the backup battery if it has one.
to search for the setup video of your product.
WAN POWER
Router
WAN LAN1 LAN2 LAN3 LAN4
Router Mode Modem
If your internet comes from an Ethernet outlet, connect the Connect to the internet
router’s WAN port to it, then follow step 4 and 5 to complete the
hardware connection.
Connect to the power socket
If you want to configure this new router to extend your network,
refer to the Access Point Mode and Range Extender Mode
sections on the back page. Connect the powered-off Turn on the modem and then
modem to the router’s WAN wait about 2 minutes for it to
Images may differ from actual products.
port with an Ethernet cable. restart.
Connect the power adapter to
the router and turn on the router.
Verify that the following LEDs stay solid on to confirm Configure the router
the hardware is connected correctly. 1. Connect your computer to the router (Wired or Wireless) 2. Launch a web browser, and enter http://tplinkwifi.net or
http://192.168.0.1 in the address bar. Create a password to log in.
Wired
Note: If the login window does not appear, please refer to FAQ > Q1.
Turn off the Wi-Fi on your computer and connect it to the router
Power 2.4GHz 5GHz Internet via an Ethernet cable. http://tplinkwifi.net
On On On On
Wireless Password
Confirm Password
a Find the product label at the
Note: If the 2.4GHz LED and 5GHz LED
are off, press and hold the WPS/Wi-Fi button bottom of the router. Start
on the rear panel for about 5 seconds, then
release the button. Both LEDs will turn on. b Use the default SSID (network 3. Run the Quick Setup, select Wireless Router and follow the
name) and wireless password QR Wireless Password/PIN:XXXXXXXX
step-by-step instructions to set up the internet connection.
to join the network. Code SSID:TP-Link_XXXX
SSID:TP-Link_XXXX_5G
Tip: If you are using a smartphone or
tablet, you can also scan the QR code to
join the preset 2.4GHz network directly.
Access Point Mode Range Extender Mode Tether App
In this mode, the router transforms your existing wired In this mode, the router boosts the existing wireless coverage TP-Link Tether app provides a simple, intuitive way to access
network to a wireless one. in your home. and manage your router.
1. Configure
Block unwelcome users from
Internet Ethernet1Ethernet2 Ethernet3Ethernet4
A. Place the router next to your host router and power it on. connecting to your network
Internet Ethernet Ethernet4 WAN
B. Connect a computer to the router via an Ethernet cable or wirelessly by
Existing Router New Router Client using the SSID (network name) and Wireless Password printed on the label
at the bottom of the router. Change the basic wireless
network settings
C. Launch a web browser and enter http://tplinkwifi.net in the address bar.
A. Power on the router. Create a password to log in.
Tether View information about clients
B. Connect the router’s WAN port to your wired router’s Ethernet port via D. Run the Quick Setup, select Range Extender and follow the step-by-step connected to your router
an Ethernet cable as shown above. instructions of the Quick Setup to set up the internet connection.
Tip: You can also go to Operation Mode to switch to Range Extender Mode.
C. Connect a computer to the router via an Ethernet cable or wirelessly by Set up Parental Controls
using the SSID (network name) and Wireless Password printed on the with access time
label at the bottom of the router.
2. Relocate
Place the router about halfway between your host router and the Wi-Fi
D. Launch a web browser and enter http://tplinkwifi.net in the address bar. “dead” zone. The location you choose must be within the range of your
Create a password to log in.
existing host network. How to begin?
E. Run the Quick Setup, select Access Point and follow the step-by-step
instructions of the Quick Setup to set up the internet connection. 1. Download the TP-Link Tether app from the Apple App
Tip: You can also go to Operation Mode to switch to Access Point Mode. Store or Google Play, or simply scan the QR code.
Host Network Extended Network 2. Launch the Tether app and log in with your TP-Link ID.
If you don’t have an account, create one first.
WPS/
Wi-Fi
RESET WAN LAN1 LAN2 LAN3 LAN4 POWER
Host Router New Router Devices
3. Connect your device to the router’s wireless network. Scan for Tether
Connect to the wireless network by using the SSID (network name) and 4. Go back to the Tether app, log into your router, and
password of the router. start managing your home network.
FAQ (Frequently Asked Questions)
Q1. What can I do if the login window does not appear? page to check whether the WAN IP address is valid or not. If it is, please run A2. Connect a computer to the router via an Ethernet cable. Log in to the
the Quick Setup again; otherwise, recheck the hardware connection. router’s web management page, and go to Wireless 2.4GHz (or Wireless
A1. Reboot your router and try again.
A4. For cable modem users, log in to the web management page of the router. 5GHz) > Wireless Security to obtain or reset your wireless password.
A2. If the computer is set to a static or fixed IP address, change the setting
Go to Network > MAC Clone, click Clone MAC Address and click Save,
to obtain an IP address automatically.
then reboot both the modem and the router. To communicate with TP-Link users or engineers, please join the TP-Link
A3. Verify that http://tplinkwifi.net is correctly entered in the web browser. Community at https://community.tp-link.com.
Alternatively, enter http://192.168.0.1 or http://192.168.1.1 in the web Q3. How do I restore the router to its factory default settings?
browser and press Enter. For technical support, replacement services, user guides, and
A1. While the router is powered on, press and hold the RESET button on the other information, please visit https://www.tp-link.com/support,
A4. Use another web browser and try again. rear panel of the router until all LEDs turn off, then release the button. or simply scan the QR code.
7106510102 REV6.0.1
A5. Disable then re-enable the network adapter being used. A2. Log in to the router’s web management page. Go to System Tools > Factory
Defaults, click Restore. The router will restore and reboot automatically.
Q2. What can I do if I cannot access the internet?
Safety Information
A1. Reboot your moden and router, then try again. Q4. What can I do if I forgot my web management password? Keep the device away from water, fire, humidity or hot environments.
A2. Check if the internet is working properly by connecting a computer A. Refer to Q3 to reset the router, then create a new password to log in. Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
©2023 TP-Link
directly to the modem using an Ethernet cable. If it is not, contact your Do not use damaged charger or USB cable to charge the device.
Do not use any other chargers than those recommended.
internet service provider. Q5. What can I do if I forgot my wireless network password? Do not use the device where wireless devices are not allowed.
A3. Log in to the web management page of the router, and go to the Status A1. The default Wireless Password is printed on the product label of the router. Adapter shall be installed near the equipment and shall be easily accessible.
