Catalog Swivel Joints
Catalog Swivel Joints
SWIVEL JOINTS
Table of Contents
Autolok, Drylok, Twin-Kam, Endura, GFL, Cliplok and Spring Ring are trademarks, and OPW®, Visi-Flo®, Kamvalok® and Kamlok® are registered trademarks of OPW Engineered Systems.
Hastelloy® is a registered trademark owned by Haynes International, Inc. Viton® and Kalrez® are registered trademarks of DuPont Dow Elastomers. Teflon® is a registered trademark of DuPont.
Chemraz® is a registered trademark of Green Tweed. Scully® and BICLOPS® are registered trademarks of Scully Signal Co.
IMPORTANT: OPW products should be used in compliance with applicable federal, state, provincial, and local laws and regulations. Product selection should be
based on physical specifications and limitations and compatibility with the environment and materials to be handled. OPW MAKES NO WARRANTY OF FITNESS
2 FOR A PARTICULAR USE. All illustrations and specifications in this literature are based on the latest product information available at the time of publication.
OPW reserves the right to make changes at any time in prices, materials, specifications and models and to discontinue models without notice or obligation.
O v e r v i e w
Overview
OPW Engineered Systems manufactures swivel joints for Quality Control for Dependable Operation
a broad range of uses in the chemical, petroleum, Our manufacturing and testing procedures meet or exceed
petrochemical, refining, mining, distilling, brewing, ink and industry standards. All swivel joints are rigorously tested to
paint industries, as well as farm irrigation and fertilizing. ensure high quality. CNC equipment is used to machine all
Design, plant and maintenance engineers use OPW swivels critical dimensions within precise tolerances to ensure that
in flexible piping systems, loading arms, hose reels, sewer each product meets our rigid engineering specifications.
rodding and wastewater treatment equipment, and various As with every other part of our product, welding is an
types of process machinery. They also use our swivel joints important quality factor. Our welders are certified to ASME
in machine tool coolant transfer, drum filling applications, Boiler and Pressure Vessel Code, Section IX. Particularly
and in a variety of in-plant fluid and dry bulk transfer important is our 100% weld penetration of fabricated steel
applications. and stainless steel swivels to meet code.
Versatility is the key to OPW Engineered Systems swivel Additional testing, including radiography as well as
joints. They make it possible for you to use rigid metal material certifications, can be provided to meet your
piping for loading and unloading fluids and dry product specific requirements. Special exterior surface preparation
under pressure or vacuum without the difficulty or danger and painting is also available.
of handling heavy, cumbersome hoses.
PHONE: (800) 547-9393 • (513) 696-1500 • Fax: (800) 245-8536 • (513) 932-9845 Printed in USA 12/04
2726 Henkle Drive • Lebanon, OH 45036 • www.opw-es.com © Copyright 2012, OPW Engineered Systems
3
3
D e s i g n F e a t u r e s
Design Features
OPW Engineered Systems fabricated and cast ball bearing swivel
joints allow you to construct a metal piping system that permits easy
movement in any direction. Moveable, flexible and reliable, OPW
Engineered Systems swivels are designed and built to the highest
quality standards, including precision machining and 100% 1 3
penetration welding, with special design features that include:
1) Tight Seals
• O-Rings provide a tight seal without hindering swivel action
6
•A
ccurately machined and micro-finished grooves provide for
minimal seal wear
•A
vailable in Buna-N, Viton®, EPT, Neoprene, Kalrez® and other
seal materials as required
•T
eflon® seals are available as spring energized or silcone/Viton®
4
encapsulated
4) Long-Life Bearings
• Ball bearings are hardened, precision-ground steel
• Stainless steel swivels have stainless steel bearings
•A
ll OPW swivels are available with stainless steel bearings on
special order
5) Easy Lubrication
• All OPW swivels are pre-lubricated at the factory Cast High-Pressure Steel (Main Seal
• All 3/4", 1", and submerged swivels are permanently lubricated has Teflon® Back-up Ring)
•A
grease fitting between races that accepts a standard grease gun is
available for swivels that require field lubrication
• Non-lubricating swivels are available on special order
Convenience of Choice
• Available in a variety of sizes beginning at 3/4" and up
• Available in threaded, flanged, and butt welded ends
• Steam jacketed and split flange swivels are also available
IMPORTANT: OPW products should be used in compliance with applicable federal, state, provincial, and local laws and regulations. Product selection should be
based on physical specifications and limitations and compatibility with the environment and materials to be handled. OPW MAKES NO WARRANTY OF FITNESS
4 FOR A PARTICULAR USE. All illustrations and specifications in this literature are based on the latest product information available at the time of publication.
OPW reserves the right to make changes at any time in prices, materials, specifications and models and to discontinue models without notice or obligation.
P r e s s u r e /T e m p e r a t u r e
Pressure/Temperature Guide
TEMPERATURE ºF TEMPERATURE ºC
3/4" 1" 1-1/4" 1-1/2" 2" 3" 4" 6" 8" 10" 12" Pressure
Material 20mm 25mm 32mm 40mm 50mm 80mm 100mm 150mm 200mm 250mm 300mm Rating*
*Maximum pressure rating of OPW swivel joints is as shown, or is determined by the flange/end connection rating, whichever is lower.
Buna-N seals are standard in all of the above swivel joints, but each is available with seals made of Viton®, Teflon®, EPT, or Neoprene,
depending on the pressures and temperatures of your operation.
Styles Available
OPW Engineered Systems swivel joints are
available in one, two and three planes of rotation
for virtually unlimited flexibility. Standard
combinations of five different metals and seal
materials cover pressures, temperatures, and
corrosion resistance and load bearing capacities
well within the limits of most application
requirements.
Style 10 Style 20
3 planes of rotation 1 plane of rotation
Style 30 Style 40
1 plane of rotation 1 plane of rotation
OPW swivel joints are available in two types of
body construction – cast and fabricated – which
differ in appearance. For illustrative purposes only,
most of the drawings featured on the following
pages are the “fabricated type”.
Style 50 Style 60
2 planes of rotation 2 planes of rotation
NOTE: Flanged or butt weld ends are available in many styles and
sizes. Only the most common styles of OPW swivel joints appear
on the following pages. If you don’t see exactly what you need,
please contact us.
IMPORTANT: OPW products should be used in compliance with applicable federal, state, provincial, and local laws and regulations. Product selection should be
based on physical specifications and limitations and compatibility with the environment and materials to be handled. OPW MAKES NO WARRANTY OF FITNESS
6 FOR A PARTICULAR USE. All illustrations and specifications in this literature are based on the latest product information available at the time of publication.
OPW reserves the right to make changes at any time in prices, materials, specifications and models and to discontinue models without notice or obligation.
STYLES AVAILABLE
STYLE 20
Thread x Thread Material Model Size (inches) Dimensions
Style 20 Steel, Cast, High Pressure 3220 1, 1-1/4, 1-1/2, 2 s B
Aluminum 3630F 3, 4, 6 l C2
Style 30W
Dimensions Chart on page 20: s Steel & Stainless Steel l Aluminum, Ductile Iron & Bronze A
PHONE: (800) 547-9393 • (513) 696-1500 • Fax: (800) 245-8536 • (513) 932-9845 Printed in USA 12/04
2726 Henkle Drive • Lebanon, OH 45036 • www.opw-es.com © Copyright 2012, OPW Engineered Systems 7
STYLES AVAILABLE
G1 L
STYLE 34
B
G2
Aluminum 3635FTH* 4 l A
*Comes complete with straight pipe handle.
H2
Style 35FT
STYLE 40
Thread x Thread Material Model Size (inches) Dimensions
L
Aluminum 3640FO 3, 4 l
Ductile Iron 3840FO 3, 4 l
Dimensions Chart on page 20: s Steel & Stainless Steel l Aluminum, Ductile Iron & Bronze A
IMPORTANT: OPW products should be used in compliance with applicable federal, state, provincial, and local laws and regulations. Product selection should be
based on physical specifications and limitations and compatibility with the environment and materials to be handled. OPW MAKES NO WARRANTY OF FITNESS
8 FOR A PARTICULAR USE. All illustrations and specifications in this literature are based on the latest product information available at the time of publication.
OPW reserves the right to make changes at any time in prices, materials, specifications and models and to discontinue models without notice or obligation.
STYLES AVAILABLE
G2
F
Style 40W
G2
Style 44F Steel, Fabricated 3444F 2, 3, 4 s
Stainless Steel, Fabricated 3944F 2, 3, 4 s
Style 44F
G3
Aluminum 3644F 3, 4, 6 l
F
Flange x Thread Material Model Size (inches) Dimensions B
G2
TTMA Truck Flange x Thread Material Model Size (inches) Dimensions
Style 44FTO Aluminum 3644FTO 3, 4 l Style 44FT
G1
G1 Style 44FTO
STYLE 45 G2
A Style 45F
G2
Dimensions Chart on page 20: s Steel & Stainless Steel l Aluminum, Ductile Iron & Bronze F
Style 50 A
STYLE 50 F
B
Aluminum 3650F 3, 4 l
Style 50FO
Ductile Iron 3850F 3, 4 l A
F
Style 55
B
F
G1
Counterweighted loading arms of this type use basic Style 55 Style 55F
inlet swivels. Style 55FO inlet swivel is shown. Aluminum
swivels are not recommended for this application. H1
Style 55FT
F
STYLE 55 B G2
A
Thread x Thread Material Model Size (inches) Dimensions
Style 55 Steel, Fabricated 3455 2, 3, 4 s
H2
Stainless Steel, Fabricated 3955 2, 3, 4 s
Aluminum 3655 3, 4 l
Ductile Iron 3855 2, 3 l A
Dimensions Chart on page 20: s Steel & Stainless Steel l Aluminum, Ductile Iron & Bronze
IMPORTANT: OPW products should be used in compliance with applicable federal, state, provincial, and local laws and regulations. Product selection should be
based on physical specifications and limitations and compatibility with the environment and materials to be handled. OPW MAKES NO WARRANTY OF FITNESS
10 FOR A PARTICULAR USE. All illustrations and specifications in this literature are based on the latest product information available at the time of publication.
OPW reserves the right to make changes at any time in prices, materials, specifications and models and to discontinue models without notice or obligation.
STYLES AVAILABLE
STYLE 60 Style 60 B A
STYLE 70 G1
A Style 70F
Flange x Flange Material Model Size (inches) Dimensions Style 70FT
Style 70F Steel, Fabricated 3470F 2, 3, 4, 6, 8, 10 s F
Stainless Steel, Fabricated 3970F 2, 3, 4, 6, 8, 10 s
Aluminum 3670F 3, 4 l
Ductile Iron 3860F 3, 4 l G2 F
B
STYLE 80 Style 80 B
*
H1
G1
*Flange x thread (Style 80FO) and butt weld x butt weld (Style 80W) units are also available. G2
Style 10
B F
STYLE 10
F
*
H2
H1
Dimensions Chart on page 20: s Steel & Stainless Steel l Aluminum, Ductile Iron & Bronze
IMPORTANT: OPW products should be used in compliance with applicable federal, state, provincial, and local laws and regulations. Product selection should be
based on physical specifications and limitations and compatibility with the environment and materials to be handled. OPW MAKES NO WARRANTY OF FITNESS
12 FOR A PARTICULAR USE. All illustrations and specifications in this literature are based on the latest product information available at the time of publication.
OPW reserves the right to make changes at any time in prices, materials, specifications and models and to discontinue models without notice or obligation.
STYLES AVAILABLE
Counterbalance Swivels
OPW Engineered Systems counterbalance swivels for both counterweighted loading
arms (see Style 55 on page 10) and torsion spring-balanced loading arms are
available (Styles 56, 58, 76, and 78) to cover virtually any combination of riser
orientation and swivel offset, including:
• Upfeed right hand • Upfeed left hand
• Downfeed right hand • Downfeed left hand
If you are uncertain as to which counterbalance replacement swivel to order, refer
to your original loading arm design drawing or contact the OPW Engineered Systems
engineering department.
Upfeed Left Hand (UFLH) Downfeed Left Hand (DFLH) Left Hand
Maximum Y-dimensions: 2" size: Y= 8-1/8" (207 mm); 3" size: Y=11" (280 mm);
4" size: Y=12" (324 mm); and 6" size: Y=18" (470 mm).
A
B Style 56
STYLE 56 H1
Dimensions Chart on page 20: s Steel & Stainless Steel l Aluminum, Ductile Iron & Bronze
STYLE 58 Style 58
F
B
Thread x TTMA Flange Material Model Size (inches) Dimensions Style 58TFT
F
H1
G2 F
Style 76FFT (DFRH*) Steel, Fabricated 3476FFT 3, 4 s
Stainless Steel, Fabricated 3976FFT 3, 4 s
Dimensions Chart on page 20: s Steel & Stainless Steel l Aluminum, Ductile Iron & Bronze
IMPORTANT: OPW products should be used in compliance with applicable federal, state, provincial, and local laws and regulations. Product selection should be
based on physical specifications and limitations and compatibility with the environment and materials to be handled. OPW MAKES NO WARRANTY OF FITNESS
14 FOR A PARTICULAR USE. All illustrations and specifications in this literature are based on the latest product information available at the time of publication.
OPW reserves the right to make changes at any time in prices, materials, specifications and models and to discontinue models without notice or obligation.
SPECIALTY SWIVEL JOINTS
S p e c i a l t y A pp l i c a t i o n s
Style 20VO
Hose Reel/Victaulic® Swivels A
Dimensions Chart on page 20: s Steel & Stainless Steel l Aluminum, Ductile Iron & Bronze
ENDURA™
Dual Split Flange
Swivels
(8400 and 8900 Series)
The OPW Engineered Systems
ENDURA™ swivel line represents
leading innovation in swivel technology.
Specifically designed for the transfer
of hazardous materials such as LPG,
acids, solvents, petrochemicals and
other toxic fluids, ENDURA™ sets the
industry standard in swivel performance
and cost-effective operation. Featuring
heavy-duty flanged construction and
available in a variety of materials.
Benefits
Endurance – heavy-duty construction
and unique design features result in
long-life, hassle-free performance.
Smooth, Easy Operation – the sealed,
one-piece deep-groove dual ball
bearing assembly ensures smooth
and easy rotation.
Improves Uptime Performance – the
simple, three-piece design allows for
the quickest and easiest disassembly
and repair in the industry, which means
less downtime, less labor, and less cost.
Lowest Overall Cost of Ownership –
heavy-duty construction ensures
long-life reliability while the unique
design features allow for cost-effective
preventive maintenance servicing
and the easiest, most cost effective
seal and bearing replacement of
any swivel. Optimized performance,
downtime prevention, and reduced
maintenance time and costs make
this the best overall swivel value
in the industry.
IMPORTANT: OPW products should be used in compliance with applicable federal, state, provincial, and local laws and regulations. Product selection should be
based on physical specifications and limitations and compatibility with the environment and materials to be handled. OPW MAKES NO WARRANTY OF FITNESS
16 FOR A PARTICULAR USE. All illustrations and specifications in this literature are based on the latest product information available at the time of publication.
OPW reserves the right to make changes at any time in prices, materials, specifications and models and to discontinue models without notice or obligation.
ENDURA ™
DUAL SPLIT FLANGE SWIVELS
Features
360º Rotation – full range of motion for ease of use. Leak Detection/Purge Port
Deep-Groove Replaceable Dual Ball Bearing
Technology – a precision-engineered, one-piece ball
bearing assembly means there are no individual Sealing Flange
balls to deal with. If required, bearing replacement
is quick and easy; simply replace the old bearing
chamber with a new one. The ENDURA™ DSF 8900
Series features a 316 Stainless Steel replaceable
Environmental Main Seal
dual ball bearing chamber.
Seal Back-Up Seal
Redundant Seal System - incorporates a main
seal, back-up seal, environmental seal and leak
detection. If the main seal ever leaks due to normal
wear, the back-up seal contains the fluid. Leakage
is then channeled to a leak detection port in the
side of the swivel to provide a visual indicator that
service is required so the seals can be replaced.
The environmental seal provides a third layer
of protection, preventing liquid from entering the
environment. Seal materials include Buna-N, Viton®,
EPT, Kalrez®, Chemraz®, Silicone, and Food Grade.
Built-In Leak Detection – a visual indicator, in the
form of a leak detection port in the side of the
swivel provides a quick and easy way to monitor
seal leakage so preventive maintenance can be Sealed, Deep-Groove Sealing Flange
performed before a problem arises. The leak Dual Ball Bearing
detection port can also serve as a purge port, Chamber
permitting use of an inert blanket of gas to prevent
product from escaping into the environment.
Versatility – available in 2", 3" and 4" sizes, and in a
variety of construction materials, including carbon
steel, stainless steel, Hastelloy®, Alloy20®, Monel®
and other exotics.
500 PSI Pressure Rating
Lubricants
OPW swivel joints should be lubricated periodically, depending on service and operating conditions. For normal
operation, annually is sufficient. Frequent lubricating may be required when service is severe, such as high
temperatures, heavy loads, or constant rotation.
Part # Description
Warning: EPT/EPDM Seals require the use of a OPW 885-0085 or a non-petroleum based lubricant.
Ball Bearings
Both steel and stainless steel ball bearings are available for all OPW swivels. Each swivel plane of rotation has two races;
quantities shown below are per pair of races.
Flange Dimensions
Flange O.D. Bolt Circle No. Bolt Bolt Dia.
Type Size (inches) in, (mm) in, (mm) Holes in, (mm)
150 lb. ASME 2 6 (153) 4-3/4 (121) 4 5/8 (16)
150 lb. ASME 3 7-1/2 (191) 6 (153) 4 5/8 (16)
TTMA 3 5-5/8 (143) 4-7/8 (124) 8 3/8 (10)
150 lb. ASME 4 9 (229) 7-1/2 (191) 8 5/8 (16)
TTMA 4 6-5/8 (169) 5-7/8 (150) 8 3/8 (10)
150 lb. ASME 6 11 (280) 9-1/2 (150) 8 3/4 (19)
150 lb. ASME 8 13-1/2 (343) 11-3/4 (242) 8 3/4 (19)
150 lb. ASME 10 16 (407) 17 (432) 12 7/8 (22)
Note: 300 lb., 600 lb., other types of flanges available on special order. Consult factory.
Dimensions
s Steel & Stainless Steel – U.S. (inches)
All dimensions are based on short radius elbows in 3/4" to 4" sizes; long radius elbows in 6”, 8” and 10” sizes.
Size A B D1 D2 D3 F G1 G2 G3 H1 H2 H3 L
3/4 2-7/16 1-3/4 3-15/16 2-1/2 3-15/16
1 2-7/16 1-3/4 3-15/16 4-5/16 2-1/2 3-15/16
1-1/4 2-15/16 2-5/16 4-5/8 3 4-11/16
1-1/2 2-15/16 2-5/16 4-5/8 4-3/4 3 4-11/16
2 4-1/8 3-1/8 5-1/16 9-1/8 12-1/8 8-1/8 4-1/16 4-9/16 2 6-7/16 8-5/8 10-1/8 1-1/4
2 3-3/4 2-15/16 5-11/16 6-1/8 3-1/8 5-5/8
3 5-1/8 4-1/4 5-7/8a 10-1/4a 12-3/4a 10-3/4a 5-1/16 5-13/16 3 8-1/8a 10-1/2a 11-3/4a 1-1/2
4 6-1/4 5-5/16 6-3/8 10-3/4 12-3/4 12-3/4 6-5/16 7-1/16 4 9-7/16 11-3/4 12-3/4 2
6 9 13-7/16 14-7/16 24-7/16b 12-9/16 9 18-15/16c 19-7/16 2
8 11-7/8 16 16 32 16-1/16 12 24 24
10 13-9/16 19-1/8 19-1/8 41-1/8 19-1/16 15 30-1/8 30-1/8
Cast High-Pressure Steel only. A=Add 1/4" for Stainless Steel units. B=21 7/16" on styles 76F and 78F. C=15 15/16" on styles 56F and 58F.
IMPORTANT: OPW products should be used in compliance with applicable federal, state, provincial, and local laws and regulations. Product selection should be
based on physical specifications and limitations and compatibility with the environment and materials to be handled. OPW MAKES NO WARRANTY OF FITNESS
20 FOR A PARTICULAR USE. All illustrations and specifications in this literature are based on the latest product information available at the time of publication.
OPW reserves the right to make changes at any time in prices, materials, specifications and models and to discontinue models without notice or obligation.
A pp r o x i m a t e W e i g h t s /S p e c i f i c a t i o n s
Specifications
All OPW swivel joints are full bore schedule 40 construction with short radius elbows, except 6", 8", and 10” fabricated steel and
stainless steel swivels which have long radius elbows. Ball bearing raceways and sealing surfaces in all swivels are precision
machined and micro-finished to assure friction-free operation and superior sealing characteristics. All steel and ductile iron swivels
are painted blue. Detailed specifications by series are as follows:
3200 Series (Cast Steel, High-Pressure)
Bodies and tails of cast 1040 carbon steel with hardened raceways. Ball bearings are precision-ground steel. Buna-N main O-ring
seal with Teflon® back-up ring, and Buna-N O-ring dust seal are standard.
3300 Series (Cast Bronze)
Bodies and tails of hard, wear-resistant cast bronze (ASTM B62-83600). Precision-ground steel balls, Buna-N O-ring main seal and
felt dust seal are standard. 1" size has Buna-N O-ring dust seal.
3400 Series (Fabricated Steel)
Bodies and tails of 1040 carbon steel with hardened raceways. Welded construction; 100% penetration welding by welders certified
to ASME Boiler and Pressure Vessel Code, Section IX. Precision-ground steel balls, Buna-N O-ring main seal, Buna-N O-ring dust
seal. Standard flanges are ASME 150 lb. raised face type.
3600 Series (Cast Aluminum)
Bodies and tails of cast A-356 high-tensile strength aluminum. Precision-ground steel balls, Buna-N O-ring main seal, and felt dust
seal are standard. 1" size has Buna-N O-ring dust seal. Flanges are dimensionally compatible to ASME 150 lb. flat face configuration.
3700 Series (Cast Stainless Steel)
Bodies and tails of high quality cast ASTM A351-CF3M/CF8M stainless steel. Precision-ground stainless steel balls, Buna-N O-ring
main seal and Buna-N O-ring dust seal.
3800 Series (Cast Ductile Iron)
Bodies and tails of cast A-536 ductile iron. Precision-ground steel balls, Buna-N O-ring main seal, and felt dust seal are standard.
Buna-N O-ring dust seal standard in 1" size. ASME B16.1, Class 125 dimensionally equal to 150lb. ASME RF Flange.
3900 Series (Fabricated Stainless Steel)
Bodies and tails of high-quality ASTM A351-CF3M/CF8M stainless steel. Welded construction; 100% penetration welding by welders
certified to ASME Boiler and Pressure Vessel Code, Section IX. Precision-ground stainless steel ball bearings, Buna-N O-ring main
seal, Buna-N O-ring dust seal. Standard flanges are ASME 150 lb. raised face type.
Refer to the Pressure/Temperature chart on page 5 to choose the proper seal and body material for the swivel you need.
Or, if you have a special application and are unable to locate the particular swivel you have in mind, please contact your local
OPW Engineered Systems representative or the factory for assistance.
Back-Up Seal
Environmental
Seal
Sealed, Deep-Groove
Dual Ball Bearing
Chamber
O P W S wivel J oints
Your guide to the industry’s most complete line of swivels.
Selected Swivel Designs: Call OPW Customer Service at 800-547-9393 for complete information on products and applications.
q 3730 Cast SST, Style 30, q 3920 F Fabricated SST,
Female NPT Style 20F, 150 Lb. Flange t 3960 FO
Fabricated SST,
Style 60FO, 150 Lb. Flange
u 3910 x Female NPT
Fabricated SST,
Style 10,
Female NPT
t 3630 VO
t 3970 W Cast Aluminum,
Fabricated SST, Style 30VO,
t 3740 Style 70W, Beveled Female NPT
Cast SST, for Welding xVictaulic® Groove
Style 40, Female NPT
t 3980 u 3330
Fabricated SST, Cast Bronze,
Style 80, Female NPT Style 30,
t 3950 Female NPT
Fabricated SST,
Style 50, Female NPT
IMPORTANT: OPW products should be used in compliance with applicable federal, state, provincial, and local laws and regulations. Product selection should be
based on physical specifications and limitations and compatibility with the environment and materials to be handled. OPW MAKES NO WARRANTY OF FITNESS
22 FOR A PARTICULAR USE. All illustrations and specifications in this literature are based on the latest product information available at the time of publication.
OPW reserves the right to make changes at any time in prices, materials, specifications and models and to discontinue models without notice or obligation.
ORDERING CHART
Style 40
Style 10 1 plane of
Style 20 Style 30 rotation
3 planes of
1 plane of rotation 1 plane of rotation
rotation
Ordering Chart: Call OPW Customer Service at 800-547-9393 for complete ordering information.
Style 44 is drop tube swivel w/handle. Styles 35, 45, 55 have threaded boss. Styles 56, 58, 76, 78 have spring balance attachment lugs.
3420F - 0403 4
5
- EPDM
- Food Grade Nitrile
Kalrez®, Chemraz® and other
seal materials available.
Construction End Connections Size
Conventional Hose 26 - Aluminum Hose Reel F - 150 lb. ASME flange both ends 007 - 3/4"
Reel Swivels 28 - Ductile Iron Hose Reel FFT - 150 lb. ASME flange inlet x TTMA tank truck flange outlet 010 - 1"
FJ - For submerged use, 150 lb. ASME flange both ends 012 - 1-1/4"
32 - Steel, High Pressure Cast
FO - 150 lb. flange x female NPT threads 015 - 1-1/2"
33 - Bronze
FSB - 150 lb. flange both ends, with spring balance attachment lugs 020 - 2"
34 - Steel, Fabricated
FT - TTMA tank truck flange both ends 030 - 3"
Conventional 36 - Aluminum
FTH - TTMA tank truck flange both ends, with female 040 - 4"
Swivels 37 - 316 Stainless Steel, Cast
VO - Victaulic® x female NPT threads 060 - 6"
38 - Ductile Iron
FTO - TTMA tank truck flange inlet x female NPT threaded outlet 080 - 8"
39 - 316 Stainless Steel, Fabricated
J - For submerged use 100 - 10"
82 - Steel Endura™ DSF Single Race LFT - Long swivel joint with TTMA tank truck flanges 120 - 12"
Endura™ DSF 84 - Steel Endura™ DSF Dual Race TFT - Female NPT threaded inlet x TTMA tank truck flange outlet
Split Flange 87 - 316 SST Endura™ DSF Single Race VOG - Female NPT threads x Victaulic® groove, hard coat anodized aluminum
Swivels 89 - 316 SST Endura™ DSF Dual Race W - Beveled for welding both ends
Alloy20®, Hastelloy®, Monel®, Duplex, PTFE-lined and other NO SUFFIX LETTER (S) indicates Female NPT threads both ends. 300 lb. flanges available
materials available. on some models. BSPT threads available.
Availability of styles, sizes and materials may vary depending upon swivel configuration. Consult OPW Customer Service regarding your exact requirements.
EXPERT SOLUTIONS FOR THE SAFE HANDLING & TRANSPORTING OF HAZARDOUS BULK PRODUCTS
Chemical & Industrial
Applications Processing Load Transporting Unload
Processing Market Unit
• Bellow Sealed Valves • Loading Arms Cargo Tanks Rail Tank Cars • Drylok Couplers • Food Processing
• Sample Valves • Couplers • Manholes • Pressure Relief Valves • Adaptors
• Gasoline
• Lined Ball Valves • Rack Monitors • Vapor Vents • Plug Valves • Delivery Elbows
• Chemical Plants
• Ethanol
PETROLEUM
• Amines • Industrial Valves • Loading Manholes • Internal Valves • Level Measurement • Valves
• Anhydrous • ISO Rings • Sealed Parcel • Autoloks • Actuators
• Valves
Ammonia • Sight Flow Indicators
• Actuators
• Epsilon • Kamvaloks • Safety Breakaways Rail Market Unit
• Propylene • Globe Valves • Dryloks • Swivels
• Swivels • Rupture Disc Devices • Epsilon • Pressure & General Purpose
• Butadiene • Swivels
• Dry Disconnects • Epsilon • Angle Valves Rail Tank Cars
• Hazardous Liquids • Epsilon
• Quick Disconnects • Dry Bulk Railcars
• Epsilon • Ethanol Rail Tank Cars
• Industrial Valves • Loading Arms Cargo Tanks Railcars • Aerators • Diesel
• Sight Flow Indicators • Aerators • Manholes • Manholes • Butterfly Valves
• Check Valves • Hatches • Tank Hatches • Biodiesel
DRY BULK
PHONE: (800) 547-9393 • (513) 696-1500 • Fax: (800) 245-8536 • (513) 932-9845
2726 Henkle Drive • Lebanon, OH 45036 • www.opw-es.com
ES-SJ-12/04-1M