HSX100 MOUNTED CARRIER ATTACHMENTS
2014 VIBRATORY PLATE COMPACTORS
www.stanleyhydraulic.com
SERIES
HSX MOUNTED ATTACHMENTS
VIBRATORY PLATE COMPACTORS
CONTENT
HSX Product Features..... 3
Application Overview...... 4
Attachment Sizing...........5
Product Information........ 6
Product Ordering............ 7
Mounting Attachments.... 8
Pin On Dimensions.......... 9
Top Dimensions.............. 10
Top Dimensions.............. 11
2 www.stanleyhydraulic.com
SERIES
HSX
MOUNTED ATTACHMENTS
PRODUCT FEATURES
Model: HSX11125S
6 5
4
2
1 COMPACT 3 RELIABILITY 5 FLEXIBILITY
Unique frame construction Direct mounted splined motor Wide range of mounting
provides a low profile design shaft eliminates a connection options are available for pin-
that enables four elastomer point at the eccentric on, skid steer or quick coupler
shock mounts located at assembly. configurations.
each corner to distribute the
vibration across the foot plate 4 PROTECTION 6 SERVICEABILITY
evenly.
Remote mounted flow control Compactors have a modular
2 DURABILITY maintains optimal motor design that enables quick
RPM. The cross check valve access to components,
Rugged box construction manages surges and protects decreasing downtime and
design withstands the harsh against accidental flow operational costs.
loading condition that offers mishaps.
trouble-free service.
www.stanleyhydraulic.com 3
SERIES
HSX MOUNTED ATTACHMENTS
APPLICATION OVERVIEW
TRENCHING
Labor-intensive hand compaction techniques are no match for a Stanley
Compactor. With a Stanley Vibratory Compactor, you won’t have to shore the
trench and you can compact 2 to 4 feet of backfill lift in one pass. Compare
that to a 6-inch lift for hand-held units.
SLOPES
There is no better way to compact on inclines or hard-to-reach areas than with
a Stanley Compactor. In areas where hand-held units can’t work and are too
steep for rollers, count on your Stanley Compactor.
PILE DRIVING
Driving piles is another application for your Stanley Compactor by putting it to
work driving materials such as piles, posts, sheeting, I-beams, soldier piling,
guard rail posts, and pipe, contact Stanley for additional details.
HSX
SERIES
4 www.stanleyhydraulic.com
SERIES
HSX
MOUNTED ATTACHMENTS
ATTACHMENT SIZING
! Using the carrier selection chart:
Mini & Large
Excavators
Choosing the right attachment is dependent upon two
Skid Steer
factors; application and available carrier.
Find your carrier weight in Tons according to the chart
below. Use the shaded bars as a reference range in
quickly matching your carrier to the corresponding
Backhoes
mounted compactor series.
HSX Sizing Chart
Carrier Weight in Tons
1 3 5 8 15 20 25 30 35 45 55 65 75 80 85 90 95
HSX3 2.5 ~ 6.5
HSX6 4.5 ~ 15
HSX11 8 ~ 27.5
HSX22 27 ~ 71
HSX Series Overview
Ove
Unit HSX3 HSX6 HSX11 HSX22
lbs 3400 6400 11,350 22,000
Centrifugal Force
kg 1542 2902 5147 10,000
Vibrations Per Minute vpm 2100 2000 2000 2100
lbs 370 850 1425 2200
Weight
kg 168 386 646 998
in 18.8 x 20 23.5 x 26 27 x 30 32 x 42
Baseplate Size
mm 442 x 508 600 x 660 686 x 762 813 x 1067
gpm 12-25 12-25 28-60 42-70
Flow Range
lpm 45-95 45-95 106-227 159-265
lbs 5,000 - 13,000 9,000 - 30,000 16,000 - 55,000 54,000 - 142,000
Carrier Weight Class
kg 2,268 - 5,897 4,082 - 13,608 7,257 - 24,948 24,494 - 64,410
www.stanleyhydraulic.com 5
SERIES
HSX MOUNTED ATTACHMENTS
PRODUCT INFORMATION
Heavy-duty, Powerful
Vibratory Compactors
Stanley’s Advantage:
Stanley mounted compactors provide
a high level of centrifugal force ranging
from 3,400 to 22,000 pounds.
These units have more compaction force
than a walk-behind plate compactor
which eliminates the need for a person
working down in the trench simplifying
ease-of-use and operator comfort.
Enhanced valve block cover provides
additional protection from accidental
mishaps.
Hydraulic hoses are protected with a
nylon sleeve cover and precisely routed
near the frame to minimize movement
and interference while on the job-site.
Flat top models offer compatibility with
many different mounting configurations to
simplify your connection at the carrier.
Each compactor has four heavy duty,
industrial grade shock mounts that
distribute vibration evenly. This delivers
consistent force to improve the operator’s
efficiency and work quality.
Warranty
To provide peace of mind, every
vibratory compactor comes with a
one year warranty. Stanley’s warran-
ty is backed by an extensive service network to
ensure maximum productivity, and uptime on the
job-site.
6 www.stanleyhydraulic.com
SERIES
HSX
MOUNTED ATTACHMENTS
PRODUCT ORDERING
Ordering Detail
Series Order Number Description Weight (lbs) Weight (kg)
HSX3025S 2 1/4 pin holes, 9 and 14 inch spacing, 13 gpm, no boom pins** 370 168
HSX3 HSX3125S Flat top design*, 13 gpm 360 163
HSX6025S 2 1/4 pin holes, 14 inch spacing, 13 gpm, no boom pins** 825 374
HSX6 HSX6125S Flat top design*, 13 gpm 850 385
HSX11 HSX11125S Flat top design*, 30 gpm 1425 646
HSX22 HSX22125S Flat top design*, 42 gpm 2200 998
Table details: * Mounting bracket not included, ** Requires mounting pak–sold separately
Note: For pile driving applications that require a bolt on solutions, contact the factory for specific details on mounting holes specifications.
Technical Specifications
Unit HSX3 HSX6 HSX11 HSX22
lbs 3400 6400 11,350 22,000
Centrifugal Force
kg 1542 2902 5147 10,000
Vibrations Per Minute vpm 2100 2000 2000 2100
psi 1600 - 2000 1800 - 2000 1800 - 2150 1800 - 2250
Hydraulic Pressure
bar 110-140 127-140 124-148 124-155
gpm 12-25 12-25 28-60 42-70
Flow Range
lpm 45-95 45-95 106-227 159-265
psi 2500 2500 2500 2500
System Relief
bar 172 172 172 172
psi 250 250 250 250
Back Pressure (max)
bar 17 17 17 17
Dimensions
Unit HSX3 HSX6 HSX11 HSX22
in 25.5 34 35 45
Length
mm 650 860 889 1143
in 17.5 23.5 27 32
Width
mm 445 597 686 813
in 18.5 27.5 29 41.25 HEIGHT
Height^
mm 470 700 737 1048
in 17.5L x 20W 23.5Lx 27L x 30W 32L x 42W
Shoe 24W
Contact Area
mm 445.5 x 508 597 x 610 686 x 762 813 x 1067
SHOE CONTACT AREA
^Height dimension applies to the flat top models without any bracket dimensions. LENGHT
www.stanleyhydraulic.com 7
SERIES
HSX MOUNTED ATTACHMENTS
MOUNTING ATTACHMENTS
Custom Bracket Configurations Mounting Pak Configurations
Mounting Brackets are primarily bolted to flat top tools, but Stanley offers custom Mounting Pak’s to fit any carrier
can be a pin on configurations that adapts to the carrier for direct pin on application that has a boom width
boom directly or to a quick coupler. Custom brackets are less than ten inches. Contact Stanley for customized
fabricated to mount onto a wide range of OEM skid steers, carriers pin on configuration. Refer to Figure 2 for
excavators, or backhoes. mounting pak details.
The Custom Combo Brackets are available upon request.
These bracket configurations expand your versatility and are
ideal for applications where the attachments are frequently
switched between skid steers and excavators or backhoes.
Refer to Figure 1 below for combo bracket types.
Figure 1
t for
acke
t e er Br plication
kid S ea p For use on OEM or
ove S ckho
Rem tor or ba other Wedge Type
v a
exca
Coupler application.
Figure 2
Flat Top Compactor mounts
to the bracket plate.
The illustration below represents the component
location required for carrier installation. Stanley’s
t for
acke
S t e er Br plication For use on Pin On
Mounting PAK consists of boom pins (item 3), spacer
kid e ap
ove S ckho bushings (item 1) washers (item 2) and retainer pins
Rem tor or ba or OEM Pin Grab
v a (item 4).
exca applications.
1
Carrier
Boom B
A
B
Flat Top Compactor mounts 1
to the bracket plate. 1
A
4
1 2 4
When contacting the factory, ensure you have the following
A
information below to enable us to accurately size your A
brackets to the carrier.
4 3
2
• Have the complete carrier model number, including any
prefix or suffix.
• Indicate if the carrier has an OEM Pin Grab Quick 3 B
Coupler already affixed.
B
• If the carrier has installed a different type of OEM or 2
4
after-market Quick Coupler, what is the coupler brand, Compactor
model, and type. 2
8 www.stanleyhydraulic.com
SERIES
HSX
MOUNTED ATTACHMENTS
PIN ON DIMENSIONS
HSX3025S - Pin On Dimensions
Dimension shown is in inches.
14.00
5.00 10.25
6X - 2.25
HSX6025S - Pin On Dimensions
Dimension shown is in inches.
10.74
(14.000)
2X - 2.500
www.stanleyhydraulic.com 9
SERIES
HSX MOUNTED ATTACHMENTS
TOP PLATE DIMENSIONS
HSX3125S - Top Plate Dimensions
ASTM A-36
Dimension shown is in inches. .50
15.75
5.910
3.940
12.60
1.970
.00
3.35
.830 Tolerances: (except as noted)
13.780
.00
.99
.X: ±0.1
.XX: ±0.06
.XXX: ±0.010
ANGLES: ±1.0
HSX6125S - Top Plate Dimensions
Dimension shown is in inches.
18.00
7.09±.020
4.41±.020
12.60
2.68 ±.020
.00
2.76
.830 .50
15.75 ±.020
1.13
.00
8X ASTM A-36
Tolerances: (except as noted)
.X: ±0.1
.XX: ±0.06
.XXX: ±0.010
ANGLES: ±1.0
10 www.stanleyhydraulic.com
SERIES
HSX
MOUNTED ATTACHMENTS
TOP PLATE DIMENSIONS
HSX11125S - Top Plate Dimensions
Dimension shown is in inches.
(20.00)
15.55
10.43
(17.50)
5.12
.00
.98
.75
18.04
14.10
3.94
.00
.98
ASTM A-36
Tolerances: (except as noted)
.83 .X: ±0.1
12X .XX: ±0.02
.XXX: ±0.005
ANGLES: ±0.5
HSX22125S - Top Plate Dimensions
Dimension shown is in inches.
28.34
16.536
10.630
21.25
8.268
5.906
.000
2.36
1.06 1.000
17.716
22.834
5.118
2.75
.000
ASTM A-36 STEEL
Tolerances: (except as noted)
.X: ±0.1
.XX: ±0.04
.XXX: ±0.010
ANGLES: ±0.5
www.stanleyhydraulic.com 11
LABOUNTY UNIVERSAL PROCESSORS
The LaBounty Universal Processors SV series are ideal for demolition, road and bridge
reconstruction and recycling operations. Up to four interchangeable jaws are offered per model,
providing maximum versatility.
MAX-FORCE SERIES BREAKERS
The Stanley MBX Series Breaker models feature industry leading design innovations including
a patented valving system which provides unmatched performance and durability. A unique,
direct-acting nitrogen chamber that results in increased impact force with the simplicity of
only two moving parts, and a rugged housing and power-cell designed to excel in the most
demanding applications. Stanley’s MBX Series Breakers are ideal for construction, demolition
and quarry applications.
LABOUNTY PULVERIZERS
Concrete Pulverizers are designed for quiet, controlled demolition, and recycling of concrete
bridge decks, walls, floor slabs, foundations, silos, culverts, pillars, encased beams, pre-cast
structures, railings, etc. Our Pulverizers excel in separating concrete from rebar, producing two
recyclable products.
HAND-HELD HYDRAULIC TOOLS
Hydraulic Hand-held Tools from Stanley increase job versatility and gets the job done quickly,
effectively, and quietly. Hydraulic power is the most efficient power of any traditional power
source with the highest power-to-weight ratio of any power tool. Our hand-held line of tools can
be powered from a variety of hydraulic power sources such as backhoes, aerial lifts, dump trucks
and Stanley Hydraulic Power Units, including our mobile power unit – the TracHorse.
For more information on Distributed by:
Stanley Hydraulic Tools,
please call our facility at:
1.800.972.2647 or
1.503.659.5660 or
Visit our web site at
www.stanleyhydraulic.com
Literature #: HSX03102014
