Product data sheet

Specifications

motion servo drive, Lexium 32, 24A,

three phase, supply voltage 208 to
480V, 7kW
LXM32SD72N4

Product availability: Stock - Normally stocked in distribution

facility

Main
Range of Product Lexium 32

Device short name LXM32S

Product or Component Type Motion servo drive

Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications
Format of the drive Book

Phase Three phase

[Us] rated supply voltage 200...240 V - 15...10 %

380...480 V - 15...10 %

Supply voltage limits 170…264 V

323…528 V

Supply frequency 50/60 Hz - 5...5 %

Network Frequency 47.5...63 Hz

EMC filter Integrated

Continuous output current 24 A 8 kHz

Output current 3s peak 72 A 208 V 5 s

72 A 480 V 5 s

maximum continuous power 6500 W 208 V

13000 W 400 V
13000 W 480 V

Nominal power 5 kW 208 V 8 kHz

7 kW 400 V 8 kHz
7 kW 480 V 8 kHz

Line current 21.1 A 34 % 208 V, with external line choke 1 mH

22.5 A 45 % 400 V, with external line choke 1 mH
19.5 A 55 % 480 V, with external line choke 1 mH
21.9 A 106 % 208 V, without line choke
17.3 A 126 % 400 V, without line choke
14.6 A 129 % 480 V, without line choke

Complementary
Switching frequency 8 kHz

overvoltage category III

Maximum leakage current 30 mA

Output voltage <= power supply voltage

Electrical isolation Between power and control

Type of cable Single-strand IEC cable 122 °F (50 °C)) copper 90 °C XLPE/EPR

Electrical connection Terminal 3 mm², AWG 12 CN8)

Tightening torque CN8 4.4 lbf.in (0.5 N.m)

Price is “List Price” and may be subject to a trade discount – check with your local distributor or retailer for actual price.

Feb 27, 2025 1

Discrete input number 2 capture

Discrete input type Capture CAP

Sampling duration 0.25 ms

Discrete input voltage 24 V DC capture

Discrete input logic Positive compliment of STO_A, compliment of STO_B)< 5 V > 15 V EN/IEC 61131-2
type 1

Response time <= 5 ms compliment of STO_A, compliment of STO_B

Discrete output number 3

Discrete output type Logic DO)24 V DC

Discrete output voltage <= 30 V DC

Discrete output logic Positive or negative DO)EN/IEC 61131-2

Contact bounce time <= 1 ms compliment of STO_A, compliment of STO_B

Braking current 50 mA

Response time on output 250 µs DO)discrete

Safety function STO (safe torque off), Integrated

Safety level SIL 3 EN/IEC 61508

Communication interface Modbus, Integrated

SERCOS III, Integrated

Connector type RJ45 (labelled CN7) Modbus

commissioning port 2-wire RS485 multidrop Modbus

Transmission rate 9600, 19200, 38400 bps 131.2 ft (40 m) Modbus

Number of addresses 1…247 Modbus

Status LED 1 LED (Red) servo drive voltage

Signalling function Display of faults 7 segments

Marking CE

Operating position Vertical +/- 10 degree

Product compatibility Servo motor BMH 5.5 in (140 mm), 2

Width 4.3 in (108 mm)

Height 10.6 in (270 mm)

Depth 9.3 in (237 mm)

Net Weight 10.6 lb(US) (4.8 kg)

Environment
Electromagnetic compatibility Conducted EMC EN 55011 class A group 1

Standards EN/IEC 61800-3

Product Certifications CSA

IP degree of protection IP20 conforming to EN/IEC 60529

Vibration resistance 1 gn (f= 13…150 Hz) conforming to EN/IEC 60068-2-6

Shock resistance 15 gn 11 ms EN/IEC 60028-2-27

Pollution degree 2 EN/IEC 61800-5-1

Environmental characteristic Classes 3C1 conforming to IEC 60721-3-3

Relative humidity Class 3K3 (5 to 85 %) without condensation IEC 60721-3-3

2 Feb 27, 2025

Ambient air temperature for 32…122 °F (0…50 °C) UL
operation
Ambient Air Temperature for -13…158 °F (-25…70 °C)
Storage
type of cooling Integrated fan

Operating altitude <= 3280.84 ft (1000 m) without derating

Ordering and shipping details

Category US1PC5118261

Discount Schedule PC51

GTIN 3606480694790

Returnability Yes

Country of origin ID

Packing Units
Unit Type of Package 1 PCE

Number of Units in Package 1 1

Package 1 Height 5.55 in (14.1 cm)

Package 1 Width 10.87 in (27.6 cm)

Package 1 Length 12.80 in (32.5 cm)

Package 1 Weight 12.421 lb(US) (5.634 kg)

Unit Type of Package 2 S03

Number of Units in Package 2 2

Package 2 Height 11.81 in (30 cm)

Package 2 Width 11.81 in (30 cm)

Package 2 Length 15.75 in (40 cm)

Package 2 Weight 26.482 lb(US) (12.012 kg)

Unit Type of Package 3 P06

Number of Units in Package 3 16

Package 3 Height 31.50 in (80 cm)

Package 3 Width 31.50 in (80 cm)

Package 3 Length 23.62 in (60 cm)

Package 3 Weight 230.048 lb(US) (104.348 kg)

Contractual warranty
Warranty 18 months

Feb 27, 2025 3

 Environmental Data

Schneider Electric aims to achieve Net Zero status by 2050 through supply chain partnerships, lower impact materials, and circularity
via our ongoing “Use Better, Use Longer, Use Again” campaign to extend product lifetimes and recyclability.

Environmental Data explained

How we assess product sustainability

Environmental footprint

Carbon footprint (kg CO2 eq, Total Life cycle) 12201

Environmental Disclosure Product Environmental Profile

Use Better

Materials and Substances

Packaging made with recycled cardboard Yes

Packaging without single use plastic Yes

SCIP Number C0961927-b9e6-4f64-bd63-334df07b6de6

China RoHS Regulation China RoHS declaration

WARNING: This product can expose you to chemicals

including: Lead and lead compounds, which is known to
California proposition 65 the State of California to cause cancer and birth defects
or other reproductive harm. For more information go to
www.P65Warnings.ca.gov

PVC free Yes

Use Again

Repack and remanufacture

Circularity Profile End of Life Information

The product must be disposed on European Union

WEEE markets following specific waste collection and never end
up in rubbish bins.

Take-back No

4 Feb 27, 2025

Product data sheet LXM32SD72N4

Dimensions Drawings

Lexium 32 Servo Drive

Dimensions

Feb 27, 2025 5

Product data sheet LXM32SD72N4

Mounting and Clearance

Lexium 32 Motion Control Servo Drives

Mounting Recommendations

LXM32•U45M2, •U90M2 and LXM32•U60N4 servo drives are cooled by natural convection. LXM32•D18M2, •D30M2,
LXM32 •D12N4, •D18N4, •D30N4 and •D72N4servo drives have an integrated fan.
When installing the servo drive in the enclosure, follow the instructions below with regard to the temperature and
protection index:

• Provide sufficient cooling of the servo drive

Do not mount the servo drive near heat sources
• Do not mount the servo drive on flammable materials
• Do not heat the servo drive cooling air by currents of hot air from other equipment and components, for
• example from an external braking resistor
• Mount the servo drive vertically (± 10%)
• If the servo drive is used above its thermal limits, control stops due to overtemperature

NOTE: For cables that are connected via the underside of the servo drive,
a free space ≥ 200 mm/7.87 in. is required under the unit to comply with
the bending radius of the connection cables.

Ambient temperature Mounting distances Instructions to be followed

0°C…+ 50°C d ≥ 0 mm –

+ 50°C…+ 60°C d ≥ 0 mm Reduce the output current by 2.2% per °C above 50°C

NOTE: Do not use insulated enclosures, as they have a poor level of

conductivity.

Recommendations for Mounting in an Enclosure

To ensure good air circulation in the servo drive:

• Fit ventilation grilles on the enclosure.

• Ensure that ventilation is adequate, otherwise install a forced ventilation unit with a filter.

6 Feb 27, 2025

Product data sheet LXM32SD72N4

(1) Natural convection

(2) Forced ventilation

• Any apertures and/or fans must provide a flow rate at least equal to that of the servo drive fans (refer to
characteristics).
• Use special filters with IP 54 protection.
Mounting in Metal Enclosure (IP 54 Degree of Protection)
The servo drive must be mounted in a dust and damp proof enclosure in certain environmental conditions, such as
dust, corrosive gases, high humidity with risk of condensation and dripping water, splashing liquid, etc. In these cases,
Lexium 32 servo drives can be installed in an enclosure where the internal temperature must not exceed 60°C.

Feb 27, 2025 7