Product Data Sheet

Industrial
USB Flash Drive Module

U-450 Series
USB 2.0 High-Speed, SLC

Commercial and Industrial

Temperature Grade

Date : Janu ar y 25 , 2 0 23
Re vi si o n: 1 .0 2
 Contents
1. PRODUCT SUMMARY ............................................................................................................ 3
2. PRODUCT FEATURES ............................................................................................................ 4
3. ORDERING INFORMATION ...................................................................................................... 5
4. PRODUCT DESCRIPTION ......................................................................................................... 7
4.1 PERFORMANCE SPECIFICATIONS ..................................................................................................... 8
4.2 CURRENT CONSUMPTION ........................................................................................................... 8
4.3 ENVIRONMENTAL SPECIFICATIONS .................................................................................................. 8
4.4 REGULATORY COMPLIANCE ......................................................................................................... 9
4.5 MECHANICAL SPECIFICATIONS ...................................................................................................... 9
4.6 RELIABILITY AND ENDURANCE .................................................................................................... 10
4.7 DRIVE GEOMETRY SPECIFICATION .................................................................................................. 10
5. ELECTRICAL INTERFACE ......................................................................................................... 11
6. ELECTRICAL SPECIFICATION .................................................................................................... 12
7. PACKAGE MECHANICAL ........................................................................................................ 13
8. ATA PASS-THROUGH COMMANDS (IDENTIFY DEVICE AND S.M.A.R.T.) .................................................. 14
8.1 ATA PASS-THROUGH COMMANDS .................................................................................................. 14
8.2 IDENTIFY DEVICE .................................................................................................................. 14
8.3 S.M.A.R.T. COMMANDS .......................................................................................................... 15
9. PART NUMBER DECODER ...................................................................................................... 18
10. MARKING SPECIFICATION ..................................................................................................... 20
10.1 TOP VIEW........................................................................................................................ 20
10.2 LABEL CONTENT .................................................................................................................. 20
11. REVISION HISTORY ............................................................................................................. 21

Swissbit AG Revision: 1.02

Industriestrasse 4 TLP: Swissbit public Template: Doc-4991
CH-9552 Bronschhofen no unauthorized distribution File: U-450_data_sheet_UI-xxAB_STD_Rev102
Switzerland www.swissbit.com/contact Page 2 of 21
U-450 Series – Industrial USB Flash Drive Module (eUSB)
1 GByte up to 16 GBytes
1. Product Summary
 Capacities: 1 GByte, 2 GBytes, 4 GBytes, 8 GBytes, 16 GBytes
 Form Factor:
o USB 2.0 solid state flash drive for internal 10-pin USB connector terminal (26.65mm x 36.8mm)
o 2.54mm or 2.00mm connector with keyed pin9
 Compliance: USB 2.0 High-Speed specification compatible (backward compliance with USB 1.1)
 Performance:
o Read Performance: Sequential Read up to 36 MBytes/s, Random Read IOPS up to 1,900
o Write Performance: Sequential Write up to 26 MBytes/s, Random Write IOPS up to 1,400
 Operating Temperature Range:
o Commercial: 0 °C to 70 °C
o Industrial: -40 °C to 85 °C
 Storage Temperature Range: -40 °C to 85 °C
 Operating Voltage: 3.3V ±5% or 5V ± 10%
 Data Retention: 10 Years @ Life Begin; 1 Year @ Life End
 Endurance in TeraBytes Written (TBW):
o Enterprise Workload: up to 101
 Shock/Vibration: 1,500 g / 50 g
 High-Performance 32-Bit Processor with Integrated, Parallel Flash Interface Engine:
o Single-Level Cell (SLC) NAND Flash
o Hardware BCH Code ECC (up to 60bit correction per 1024 Bytes)
 High Reliability:
o Mean Time Between Failure (MTBF): > 3,000,000 hours @ 25°C
o Data Reliability: < 1 non-recoverable error per 1017 bits read

Swissbit AG Revision: 1.02

Industriestrasse 4 TLP: Swissbit public Template: Doc-4991
CH-9552 Bronschhofen no unauthorized distribution File: U-450_data_sheet_UI-xxAB_STD_Rev102
Switzerland www.swissbit.com/contact Page 3 of 21
2. Product Features
 Subpage based Flash management for increased endurance & random performance
 Optimized FW algorithms especially for high read access and long data retention applications
o Proven power fail management for highest reliability
o Near Miss ECC technology
Minimize the risk of uncorrectable bit failure over the product life time. Each read command
analyzes the ECC margin level and refreshes data if necessary.
o Read Disturb Management
The read commands are monitored and the content is refreshed when critical levels have
occurred.
o Wear Leveling technology
Equal wear leveling of static and dynamic data. The wear leveling assures that dynamic data
as well as static data is balanced evenly across the memory. This guarantees the maximum
write endurance of the device.
o Data Care Management
The interruptible background process controls the user data for read disturb effects or high
temperature related retention degradation and refreshes data if necessary.
 Detailed S.M.A.R.T. support and extended vendor information
 LED for operation indication
 In-field firmware update
 Swissbit Life Time Monitoring (SBLTM) tool and SDK for SBLTM (on request)
 Controlled BOM & PCN process
 Customized options like registers, removable device, connector options, write protect switch,
grounded mounting hole, densities, uploads, label, etc.

Swissbit AG Revision: 1.02

Industriestrasse 4 TLP: Swissbit public Template: Doc-4991
CH-9552 Bronschhofen no unauthorized distribution File: U-450_data_sheet_UI-xxAB_STD_Rev102
Switzerland www.swissbit.com/contact Page 4 of 21
3. Ordering Information
Table 1: Standard Product List
Temperature
Capacity Commercial Industrial
Part Number Part Number
1 GByte SFUI1024cxAB1TO-C-MS-2y1-STD SFUI1024cxAB1TO-I-MS-2y1-STD
2 GBytes SFUI2048cxAB2TO-C-MS-2y1-STD SFUI2048cxAB2TO-I-MS-2y1-STD
4 GBytes SFUI4096cxAB1TO-C-MS-2y1-STD SFUI4096cxAB1TO-I-MS-2y1-STD
8 GBytes SFUI008GcxAB2TO-C-MS-2y1-STD SFUI008GcxAB2TO-I-MS-2y1-STD
16 GBytes SFUI016GcxAB1TO-C-QT-2y1-STD SFUI016GcxAB1TO-I-QT-2y1-STD
c = connector, x = product generation, y = firmware revision

Table 2: Available Part Numbers

Industrial Temperature

Capacity Part Number Connector

1 GByte SFUI1024J2AB1TO-I-MS-2A1-STD 2.54mm pitch
1 GByte SFUI1024J2AB1TO-I-MS-2B1-STD 2.54mm pitch
2 GBytes SFUI2048J2AB2TO-I-MS-2A1-STD 2.54mm pitch
2 GBytes SFUI2048K2AB2TO-I-MS-2A1-STD 2.00mm pitch
2 GBytes SFUI2048J2AB2TO-I-MS-2B1-STD 2.54mm pitch
2 GBytes SFUI2048K2AB2TO-I-MS-2B1-STD 2.00mm pitch
4 GBytes SFUI4096J2AB1TO-I-MS-2A1-STD 2.54mm pitch
4 GBytes SFUI4096K2AB1TO-I-MS-2A1-STD 2.00mm pitch
4 GBytes SFUI4096J2AB1TO-I-MS-2B1-STD 2.54mm pitch
4 GBytes SFUI4096K2AB1TO-I-MS-2B1-STD 2.00mm pitch
8 GBytes SFUI008GJ2AB2TO-I-MS-2A1-STD 2.54mm pitch
8 GBytes SFUI008GK2AB2TO-I-MS-2A1-STD 2.00mm pitch
8 GBytes SFUI008GJ2AB2TO-I-MS-2B1-STD 2.54mm pitch
16 GBytes SFUI016GJ2AB1TO-I-QT-2A1-STD 2.54mm pitch
16 GBytes SFUI016GK2AB1TO-I-QT-2A1-STD 2.00mm pitch
16 GBytes SFUI016GJ2AB1TO-I-QT-2B1-STD 2.54mm pitch

Swissbit AG Revision: 1.02

Industriestrasse 4 TLP: Swissbit public Template: Doc-4991
CH-9552 Bronschhofen no unauthorized distribution File: U-450_data_sheet_UI-xxAB_STD_Rev102
Switzerland www.swissbit.com/contact Page 5 of 21
 Commercial Temperature

Capacity Part Number Connector

1 GByte SFUI1024J2AB1TO-C-MS-2A1-STD 2.54mm pitch
1 GByte SFUI1024J2AB1TO-C-MS-2B1-STD 2.54mm pitch
2 GBytes SFUI2048J2AB2TO-C-MS-2A1-STD 2.54mm pitch
2 GBytes SFUI2048J2AB2TO-C-MS-2B1-STD 2.54mm pitch
4 GBytes SFUI4096J2AB1TO-C-MS-2A1-STD 2.54mm pitch
4 GBytes SFUI4096J2AB1TO-C-MS-2B1-STD 2.54mm pitch
8 GBytes SFUI008GJ2AB2TO-C-MS-2A1-STD 2.54mm pitch
16 GBytes SFUI016GJ2AB1TO-C-QT-2A1-STD 2.54mm pitch

Swissbit AG Revision: 1.02

Industriestrasse 4 TLP: Swissbit public Template: Doc-4991
CH-9552 Bronschhofen no unauthorized distribution File: U-450_data_sheet_UI-xxAB_STD_Rev102
Switzerland www.swissbit.com/contact Page 6 of 21
4. Product Description
The Swissbit U-450 USB 2.0 embedded USB flash drive provides a robust, high performance, and reliable
storage product with industry compatible interface and small form factor. The U-450 SLC technology both
enables high NAND flash operation and excellent endurance. The use of page based Flash management and
a global wear leveling extends the endurance to unprecedented values for USB products.
The 10-pin connector makes easy integration into existing or newly designed system boards possible. The
U-450 is compatible with standard on-board USB connectors. The embedded USB module serves applications
which utilize USB products as acceleration cache for HDDs or as a boot media, for example networking and
telecommunication systems.
For outdoor use or in poorly ventilated systems the U-450 is available in industrial temperature grade from
-40°C to +85°C. Each individual industrial temperature grade drive is tested at these corners to verify the
temperature resistance.
The U-450 firmware includes data care management features which refresh storage areas that are not or only
infrequently read. At high temperature operation these areas are prone to retention loss. The firmware
monitors the state of the NAND blocks and refreshes those that show a high level of degradation, thus
preventing uncorrectable errors. This is an important feature for USB flash drives that are used as read only
boot media.
The U-450 consists of a high performance 32bit RISC USB controller, the 10pin connector, power circuitry and
different numbers of NAND dies.
The U-450 can flexibly operate at 3.3V ±5% or 5V ± 10%.

It supports USB 2.0 High-Speed and is fully backwards compatible to USB 1.1 Full Speed.

Figure 1: U-450 Functional Block Diagram

Swissbit AG Revision: 1.02

Industriestrasse 4 TLP: Swissbit public Template: Doc-4991
CH-9552 Bronschhofen no unauthorized distribution File: U-450_data_sheet_UI-xxAB_STD_Rev102
Switzerland www.swissbit.com/contact Page 7 of 21
4.1 Performance Specifications
The U-450 read/write sequential and random CDM performance benchmarks are detailed in the following
Table 3.

Table 3: Read/Write Performance in High-Speed mode1

Sequential Read Sequential Write Random Read 4K Random Write 4K
Capacity
(MBPS) (MBPS) (IOPS) (IOPS)
1 GByte 30 18 1,750 1,400
2 GBytes 30 19 1,550 1,100
4 GBytes 36 26 1,900 1,350
8 GBytes 36 26 1,900 1,400
16 GBytes 36 26 1,900 1,400

4.2 Current Consumption

The drive-level current consumption as a function of operating mode is shown in the following Table 4.

Table 4: Current Consumption2

Sequential Sequential Random Read Random Write
Capacity Idle Unit
Read Write 4K 4K
1 GByte 59 63 44 49 28
2 GBytes 60 66 43 48 28
4 GBytes 68 66 49 50 30 mA
8 GBytes 70 68 50 51 30
16 GBytes 75 72 51 53 30

4.3 Environmental Specifications

Recommended Operating Conditions

The recommended operating conditions for the U-450 USB flash drives are provided in the following Table 5.

Table 5: Recommended Operating Conditions

Parameter Value
Commercial Operating Temperature 0 °C to 70 °C
Industrial Operating Temperature -40 °C to 85 °C

Power Supply VCC Voltage 3.3 V ± 5% or 5.0 V ± 10%

Recommended Storage Conditions

The recommended storage conditions are listed in the following Table 6.

Table 6: Recommended Storage Conditions

Parameter Value
Commercial Storage Temperature -40 °C to 85 °C3
Industrial Storage Temperature -40 °C to 85 °C3

1
The values are measured using CrystalDiskMark 6.0.2 x64 (CDM) with Seq Q32T1 and 4KiB Q8T8. Performance depends on flash type and
number, file/cluster size, and burst speed.
2
All values are the typical recorded at 25 °C, with 5V supply voltage at fastest CrystalDiskMark 6.0.2 x64 (CDM) in High-Speed mode.
3
The retention at high temperature is reduced. The acceleration factor at 85°C compared with 40°C is 170.
Swissbit AG Revision: 1.02
Industriestrasse 4 TLP: Swissbit public Template: Doc-4991
CH-9552 Bronschhofen no unauthorized distribution File: U-450_data_sheet_UI-xxAB_STD_Rev102
Switzerland www.swissbit.com/contact Page 8 of 21
 Shock, Vibration and Humidity
The maximum shock, vibration and humidity test conditions are listed in the following Table 7.

Table 7: Shock, Vibration and Humidity

Parameter Value
1,500 g, 0.5 ms pulse duration, half-sine wave
Shock
(IEC 60068-2-27, JESD22-B110)
50 g, 20Hz – 2000Hz, 3 axes
Vibration
(IEC 60068-2-6, MIL-STD-883 H M2007.3)
85% RH 85 °C, 1000 hrs, max. supply voltage
Humidity (Non-Condensing)
(JESD22-A101)

4.4 Regulatory Compliance

The U-450 devices comply with the regulations / standards listed in the following Table 8.

Table 8: Regulatory Compliance

Abbreviation Regulation/ Standard
CE - 2014/30/EU
EMC FCC - 47 CFR Part 15
UKCA - S.I. 2016 No. 1091 and S.I. 2012 No. 3032
RoHS 2011/65/EU with 2015/863/EU and 2017/2102/EU
REACh 1907/2006/EU and 207/2011/EU
WEEE 2012/19/EU

4.5 Mechanical Specifications

Physical dimensions are detailed in the following Table 9. Figure 3 on page 13 illustrates the U-450
dimensions.

Table 9: Measured Physical Dimensions

Physical Dimensions Unit

Length 36.8±0.15

Width 26.65±0.15 mm
9.7±0.25 (standard connector)
Thickness (Max)
5.8±0.25 (low profile connector)
Weight (Max Capacity) 5 g

Swissbit AG Revision: 1.02

Industriestrasse 4 TLP: Swissbit public Template: Doc-4991
CH-9552 Bronschhofen no unauthorized distribution File: U-450_data_sheet_UI-xxAB_STD_Rev102
Switzerland www.swissbit.com/contact Page 9 of 21
4.6 Reliability and Endurance
The Mean Time Between Failure (MTBF) is specified to exceed the value listed in the following Table 10. Data
reliability with effective error tolerance and data retention at the beginning and end of life is also provided.

Table 10: Reliability

Parameter Value
MTBF (at 25 °C) > 3,000,000 hours
17
Data Reliability < 1 Non-Recoverable Error per 10 Bits Read
Data Retention (up to 40°C) 10 Years at Start (JESD47), 1 Year at EOL

Endurance represented as both TeraBytes Written (TBW) and full Drive Writes Per Day (DWPD) is provided in the
following Table 11.

Table 11: Endurance4, 5

Enterprise Workload
Capacity
TBW DWPD6

1 GByte 7.7 4.2

2 GBytes 15 4.2
4 GBytes 31 4.2
8 GBytes 60 4.1
16 GBytes 101 3.4

4.7 Drive Geometry Specification

Table 12: Drive Geometry

Total LBA User Addressable Bytes
Raw Capacity User Capacity
Decimal (Unformatted)
1 GByte 1 GByte 1,960,704 1,003,880,448
2 GBytes 2 GBytes 3,921,664 2,007,891,968
4 GBytes 4 GBytes 7,843,328 4,015,783,936
8 GBytes 8 GBytes 15,663,104 8,019,509,248
16 GBytes 16 GBytes 31,719,424 16,240,345,088

4
Enterprise workload follows the JEDEC JESD219 standard. Enterprise workload values are measured based on 168 hours of runtime.
1 TByte = 1012 bytes
5
The specified TBW is valid if the amount is spread evenly over at least 18 months. Higher average daily data volume reduces the specified
TBW. Swissbit recommends to calculate the service life based on target system mission profile.
6
DWPD values are based on a service life of 5 years
Swissbit AG Revision: 1.02
Industriestrasse 4 TLP: Swissbit public Template: Doc-4991
CH-9552 Bronschhofen no unauthorized distribution File: U-450_data_sheet_UI-xxAB_STD_Rev102
Switzerland www.swissbit.com/contact Page 10 of 21
5. Electrical Interface
 USB connector 10pin (2mm or 2.54mm pitch)
 USB 2.0 High-Speed interface, USB 1.1 Full Speed compatible
 STD variation

Table 13: Electrical pinout

Figure 2: Module view
Pin Signal Standard type Optional on request
(connector side)
1 V_Bus Operating voltage
2 NC Not Connected V_Bus
3 D- Data signal pair
4 NC Not Connected
5 D+ Data signal pair
6 NC Not Connected
7 GND Ground
8 NC Not Connected GND
10 2
9 NC Keyed at connector not keyed NC or V_Bus 9 1
10 Shield Ground (shield) NC, LED out
See also chapter 7 Package Mechanical

Swissbit AG Revision: 1.02

Industriestrasse 4 TLP: Swissbit public Template: Doc-4991
CH-9552 Bronschhofen no unauthorized distribution File: U-450_data_sheet_UI-xxAB_STD_Rev102
Switzerland www.swissbit.com/contact Page 11 of 21
6. Electrical Specification
Table 14: Absolute Maximum Ratings
Parameter Symbol Min Max Unit
Power Supply Voltage V_Bus -0.5 6.0
V
Voltage at D+ and D- V_Data -0.5 5.0
Commercial Operating Temperature 0 70
T_A °C
Industrial Operating Temperature -40 85

Table 15: DC characteristics for High-Speed operation (T=25°C, V_Bus=5V)

Parameter Symbol Density Min Typ Max Unit
Supply Voltage V_Bus all 3.1 3.3 or 5.0 5.50 V
1 GByte 63 75
2 GBytes 66 75
Write current I_WR 4 GBytes 66 75
8 GBytes 68 75
16 GBytes 72 75
1 GByte 59 75
mA
2 GBytes 61 75
Read current I_RD 4 GBytes 68 75
8 GBytes 70 75
16 GBytes 75 75
7
Idle current I_IDL all 28 40
Suspend current I_CCS all 1.9 2.5
High Speed Idle Level V_HSOI all -10 10
High Speed Data Signaling LOW V_HSOL all -10 10
High Speed Data Signaling HIGH V_HSOH all 360 440 mV
Chirp J Level (differential) V_CHIRPJ all 360 440
Chirp K Level (differential) V_CHIRPK all -440 -360

7
For every 10th power-on cycle, typically 5 minutes after power-on, the device performs background data care management that requires
up to 70mA.
Swissbit AG Revision: 1.02
Industriestrasse 4 TLP: Swissbit public Template: Doc-4991
CH-9552 Bronschhofen no unauthorized distribution File: U-450_data_sheet_UI-xxAB_STD_Rev102
Switzerland www.swissbit.com/contact Page 12 of 21
7. Package Mechanical
 Standard form factor of PCBs 36.8mm x 26.65mm
 Oval hole for mechanical fixture (optional grounded)
 3 additional holes
 LED for operation indication (optional without LED)
 2 connector types
o 2.54mm pitch, 7.5mm long standard
o 2.00mm pitch, 3.68mm long low profile
 Component heights max. 1.2mm on connector side
max. 1.4mm on flash side

Figure 3: Mechanical Dimensions for U-450 drive

All dimensions are in millimeters, tolerance: ±0.15

Swissbit AG Revision: 1.02

Industriestrasse 4 TLP: Swissbit public Template: Doc-4991
CH-9552 Bronschhofen no unauthorized distribution File: U-450_data_sheet_UI-xxAB_STD_Rev102
Switzerland www.swissbit.com/contact Page 13 of 21
8. ATA Pass-Through commands (Identify Device and S.M.A.R.T.)
8.1 ATA Pass-Through commands
Additional to the standard SCSI commands the device also supports the ATA Pass-Through commands.

Table 16: ATA PASS-TRHOUGH(x) commands

SCSI command OpCode Description
ATA PASS-THROUGH(12) A1h
Write and read ATA registers to send commands and read information
ATA PASS-THROUGH(16) 85h

http://www.t10.org/ftp/t10/document.04/04-262r8.pdf

Table 17: ATA register addressing

Offset address Input Output Type Identify device e.g. SMART commands
0 Data Word
1 Feature Error Byte xx yyh*
2 Sector count Byte xx 01h
3 LBA_Low Byte xx xx
4 LBA_Mid Byte xx 4Fh
5 LBA_High Byte xx C2h
6 Drive/head Byte E0h E0h
7 Command Status Byte ECh B0h
* see below

8.2 Identify Device

The Identify Device returns a identify sector compatible to ATA and SATA devices.
Here an example of the interpretation of this sector.

Table 18: Identify Device Information

Default Total
Word(s) Data Field Type Information
Value Bytes
0 0040h 2 Standard Configuration Fixed (optional 848Ah for removable)
… … … … …
10-19 aaaa* 20 Serial number in ASCII (right-justified)
… … … … …
23-26 XXXX* 8 Firmware revision in ASCII (big-endian byte order in Word)
27-46 XXXX* 40 Model number in ASCII (right-justified)
… … … … …
60-61 XXXXh 4 Total number of sectors addressable in LBA mode
… … … … …
0101h
82 7701h* 2 Command set: SMART feature set, service interrupt
4063h*
… … … … …
000Xh
85 0701h* 2 Command set enabled: SMART feature set enabled/disabled
4063h*
… … … … …
255 XXA5h 2 Integrity Word
* Values depend on device configuration.

Swissbit AG Revision: 1.02

Industriestrasse 4 TLP: Swissbit public Template: Doc-4991
CH-9552 Bronschhofen no unauthorized distribution File: U-450_data_sheet_UI-xxAB_STD_Rev102
Switzerland www.swissbit.com/contact Page 14 of 21
8.3 S.M.A.R.T. commands
The intent of the SMART command feature set is to protect user data and minimize the likelihood of
unscheduled system downtime that may be caused by predictable degradation and/or fault of the device. By
monitoring and storing critical performance and calibration parameters, SMART feature set devices attempt to
predict the likelihood of a near-term degradation or fault condition. Providing the host system the knowledge
of a negative reliability condition allows the host system to warn the user of the impending risk of a data loss
and advise the user of the appropriate action.

All S.M.A.R.T. commands have the command code B0h. The different commands are selected by the Feature
register.

Table 19: S.M.A.R.T. Features Supported

Sect LBA LBA LBA DRV Com-
Operation Feature
Count low mid high head mand
S.M.A.R.T. Read Data D0h 01h xx 4Fh C2h E0h B0h
S.M.A.R.T. Read Attribute Thresholds D1h 01h xx 4Fh C2h E0h B0h
S.M.A.R.T. Enable Operations D8h xx xx 4Fh C2h E0h B0h
S.M.A.R.T. Disable Operations D9h xx xx 4Fh C2h E0h B0h
S.M.A.R.T. Return Status DAh xx xx 4Fh C2h E0h B0h

All commands are aborted, if the LBA signature is invalid.

S.M.A.R.T. Read Data (D0h)

When the drive receives the S.M.A.R.T. Read Data subcommand, it returns one sector (512 bytes) of data. See
the following table for the data structure of this sector.

Table 20: S.M.A.R.T. Data Structure

Byte(s) Value Description
0-1 0010h S.M.A.R.T. structure version
2-361 XXh Attribute entries 1 to 30 (see Table 21)
362 00h Off-line data collection status (no off-line data collection started)
363 00h Self-test execution status byte (self-test completed)
364-365 0000h Total time, in seconds, to complete off-line data collection
366 00h Vendor specific
367 00h Off-line data collection capability (no off-line data collection)
368-369 0003h S.M.A.R.T. capabilities
370 00h No Error logging capability
371 00h Vendor specific
372 00h Short self-test routine recommended polling time, in minutes
373 00h Extended self-test routine recommended polling time, in minutes
374-385 00h Reserved
386-387 0004h SMART Version
388-510 XXh Vendor specific
511 XXh Data structure checksum

Swissbit AG Revision: 1.02

Industriestrasse 4 TLP: Swissbit public Template: Doc-4991
CH-9552 Bronschhofen no unauthorized distribution File: U-450_data_sheet_UI-xxAB_STD_Rev102
Switzerland www.swissbit.com/contact Page 15 of 21
 S.M.A.R.T. Attribute Entry Structure
Each attribute entry (Bytes 2-361) consists of 12 bytes. See the following table for the data structure of each
entry.

Table 21: Attribute Entry

Offset Byte(s) Value Description
0 XXh Attribute ID (see Table 22)
Flags (little-endian)
1-2 XXXXh Bit0: Advisory (0) or Prefailure (1)
Bit1: Not used (0) or updated during normal operation (1)
3 XXh Current value as a percentage 64h = 100%
4 XXh Worst value as a percentage 64h = 100%
5-10 XXXXh Raw value (little-endian)
11 00h Reserved

S.M.A.R.T. Attributes
The drives support the S.M.A.R.T. attributes listed in the following table.
The Threshold values can be read out with the S.M.A.R.T. Read Attribute Thresholds command (D1h)
The first attributes (196, 213, 229) are “Pre-Fail” type, while all other are Advisory (Old Age).

Table 22: S.M.A.R.T. Attributes

ID ID Thres- RAW values
Value Worst Attribute Description
dec hex hold Offset 5-10
196 C4h X% X% 25 Spare Block Number of total Initial (offset 5-7) and current
Count available NAND spare (offset 8-10) number of spare
blocks blocks
213 D5h X% X% 25 Spare Block Spare block count for Initial (offset 5-7) and current
Count worst the NAND with the (offset 8-10) number of spare
channel lowest number of blocks of the channel with the
remaining spare blocks lowest current number of spare
blocks
229 E5h X% X% 2 Total Erase Estimated number of Estimated number of total NAND
Count total NAND block erases block erases
203 CBh 100 100 0 Total ECC Errors All recorded ECC errors Total number of ECC errors
(correctable and uncorrectable)
(offset 5-8)
204 CCh 100 100 0 Correctable ECC Total recorded ECC Total number of correctable ECC
Errors errors that were errors (offset 5-8)
corrected during the
life of the drive
199 C7h 100 100 0 UDMA CRC Dummy attribute, This value is fixed at 0.
Errors included for legacy
reasons
232 E8h 100 100 0 Total Number Total number of NAND Total number of NAND READ
of Reads READ commands commands
12 0Ch 100 100 0 Power-On Count of power-on Number of power cycles (offset
Count events 5-8)
241 F1h 100 100 0 Total LBAs Total amount of data Total number of LBAs written to
Written written to the drive the disk, divided by 65536

242 F2h 100 100 0 Total LBAs Total amount of data Total number of LBAs read from
Read read from the drive the disk, divided by 65536
214 D6h 100 100 0 Management Total number of times Management block write count
Block status the management block (offset 5-8)
has been updated
215 D7h X% X% 0 Trim Status Amount of device This value is fixed at 0.
content that is
currently in the
trimmed state

Swissbit AG Revision: 1.02

Industriestrasse 4 TLP: Swissbit public Template: Doc-4991
CH-9552 Bronschhofen no unauthorized distribution File: U-450_data_sheet_UI-xxAB_STD_Rev102
Switzerland www.swissbit.com/contact Page 16 of 21
 S.M.A.R.T. Read Attribute Thresholds (D1h)
When the drive receives the S.M.A.R.T. Read Attribute Thresholds subcommand, it returns one sector (512 bytes)
of data similar as S.M.A.R.T. Read data sector, but with the threshold value in offset 1 of each attribute (see
Table 22).

S.M.A.R.T. Enable Operations (D8h)

This command enables access to the S.M.A.R.T. capabilities of the drive. The state of SMART (enabled or
disabled) is preserved across power cycles.

S.M.A.R.T. Disable Operations (D9h)

This command disables access to the S.M.A.R.T. capabilities of the drive. The state of SMART (enabled or
disabled) is preserved across power cycles.

S.M.A.R.T. Return Status (DAh)

Table 23: S.M.A.R.T. Return Status

Sect LBA LBA LBA DRV Com-
Operation Feature
Count low mid high head mand
Command S.M.A.R.T. Return Status DAh xx xx 4Fh C2h E0h B0h
Response
S.M.A.R.T. Return Status OK xx xx xx 4Fh C2h xx xx
S.M.A.R.T. Return Status Pre-FAIL* xx xx xx F4h 2Ch xx xx
* If a threshold exceeded condition exists for either the Spare Block Count Worst Channel attribute or the Erase Count attribute, the
device will set the Cylinder Low register to F4h and the Cylinder High register to 2Ch. In this case the drive should be replaced soon.

Swissbit AG Revision: 1.02

Industriestrasse 4 TLP: Swissbit public Template: Doc-4991
CH-9552 Bronschhofen no unauthorized distribution File: U-450_data_sheet_UI-xxAB_STD_Rev102
Switzerland www.swissbit.com/contact Page 17 of 21
 9. Part Number Decoder
S F UI 016G J 2 A B 1 TO - I - Q T - 2B1 - STD
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Manuf. Option
Memory Type. Configuration
Product Type Manuf. Code: Flash Mode
Density Manuf. Code: Flash Package
Platform Temp. Option
Product Generation Flash Vendor Code
Memory Organization Number of Flash Chips
Technology

9.1 Manufacturer
Swissbit code S

9.2 Memory Type

Flash F

9.3 Product Type

U-xxx USB Flash Drive Module (Internal) UI

9.4 Density
1 GByte 1024
2 GBytes 2048
4 GBytes 4096
8 GBytes 008G
16 GBytes 016G

9.5 Platform
U-xxx – 2.54mm plug J
U-xxx – 2.00mm plug K

9.6 Product Generation

First generation 1
Second generation 2

9.7 Memory Organization

x8 A

9.8 Technology
U-4xx platform UFD B

Swissbit AG Revision: 1.02

Industriestrasse 4 TLP: Swissbit public Template: Doc-4991
CH-9552 Bronschhofen no unauthorized distribution File: U-450_data_sheet_UI-xxAB_STD_Rev102
Switzerland www.swissbit.com/contact Page 18 of 21
9.9 Number of Flash Chips
1 Flash 1
2 Flash 2

9.10 Flash Code

Toshiba / Kioxia TO

9.11 Temperature Option

Commercial Temperature Range: 0 °C to 70 °C C
Industrial Temperature Range: -40 °C to 85 °C I

9.12 Die Classification

SLC MONO (single die package) M
SLC DDP (dual die package) D
SLC QDP (quad die package) Q

9.13 Pin Mode

TSOP
Single nCE and Single R/nB S
Dual nCE and Dual R/nB T

9.14 Configuration XYZ

X = Configuration
Configuration X
Removable Drive 1
Fixed Drive 2

Y = Firmware Revision
FW Revision Y
Revision 1 A
Revision 2 B

Z= Features
Features Z
Default (SLC or MLC) 1
pSLC (pseudo SLC) P

9.15 Option
Swissbit / Standard STD
Customized version XXX

Swissbit AG Revision: 1.02

Industriestrasse 4 TLP: Swissbit public Template: Doc-4991
CH-9552 Bronschhofen no unauthorized distribution File: U-450_data_sheet_UI-xxAB_STD_Rev102
Switzerland www.swissbit.com/contact Page 19 of 21
10. Marking Specification
10.1 Top View

Figure 4: U-450 top view (example)

10.2 Label content

Figure 5: U-450 label details

Swissbit AG Revision: 1.02

Industriestrasse 4 TLP: Swissbit public Template: Doc-4991
CH-9552 Bronschhofen no unauthorized distribution File: U-450_data_sheet_UI-xxAB_STD_Rev102
Switzerland www.swissbit.com/contact Page 20 of 21
11. Revision History
Table 24: Document Revision History
Date Revision Description Revision Details
15-May-2020 0.90 Preliminary release Doc. req. no. 3693
31-Aug-2020 1.00 Initial release Doc. req. no. 4007
Added 1 GByte product variant, additional commercial
13-Jan-2021 1.01 Doc. req. no. 4306
temperature partnumbers and updated feature icons
25-Jan-2023 1.02 Added new FW revision products Doc. req. no. 6014

Disclaimer:
No part of this document may be copied or reproduced in any form or by any means, or transferred to any
third party, without the prior written consent of an authorized representative of Swissbit AG (“SWISSBIT”). The
information in this document is subject to change without notice. SWISSBIT assumes no responsibility for any
errors or omissions that may appear in this document and disclaims responsibility for any consequences
resulting from the use of the information set forth herein. SWISSBIT makes no commitments to update or to
keep current information contained in this document. The products listed in this document are not suitable
for use in applications such as, but not limited to, aircraft control systems, aerospace equipment, submarine
cables, nuclear reactor control systems and life support systems. Moreover, SWISSBIT does not recommend or
approve the use of any of its products in life support devices or systems or in any application where failure
could result in injury or death. If a customer wishes to use SWISSBIT products in applications not intended by
SWISSBIT, said customer must contact an authorized SWISSBIT representative to determine SWISSBIT willingness
to support a given application. The information set forth in this document does not convey any license under
the copyrights, patent rights, trademarks or other intellectual property rights claimed and owned by SWISSBIT.
The information set forth in this document is considered to be “Proprietary” and “Confidential” property
owned by SWISSBIT.

ALL PRODUCTS SOLD BY SWISSBIT ARE COVERED BY THE PROVISIONS APPEARING IN SWISSBIT’S TERMS AND CONDITIONS
OF SALE ONLY, INCLUDING THE LIMITATIONS OF LIABILITY, WARRANTY AND INFRINGEMENT PROVISIONS. SWISSBIT MAKES
NO WARRANTIES OF ANY KIND, EXPRESS, STATUTORY, IMPLIED OR OTHERWISE, REGARDING INFORMATION SET FORTH
HEREIN OR REGARDING THE FREEDOM OF THE DESCRIBED PRODUCTS FROM INTELLECTUAL PROPERTY INFRINGEMENT AND
EXPRESSLY DISCLAIMS ANY SUCH WARRANTIES INCLUDING WITHOUT LIMITATION ANY EXPRESS, STATUTORY OR IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

© 2023 SWISSBIT AG All rights reserved.

Swissbit AG Revision: 1.02

Industriestrasse 4 TLP: Swissbit public Template: Doc-4991
CH-9552 Bronschhofen no unauthorized distribution File: U-450_data_sheet_UI-xxAB_STD_Rev102
Switzerland www.swissbit.com/contact Page 21 of 21