THE UNCANNY X-MEN

SERVICE AND OPERATION MANUAL

WARNING
IMPORTANT HEALTH WARNING: PHOTOSENSITIVE SEIZURES - A very small percentage of people may experience a seizure when exposed to certain visual images,
including flashing lights or patterns. Even people with no history of seizures of epilepsy may have an undiagnosed condition that can cause “photosensitive epileptic
seizures” due to certain visual images, flashing lights or patterns. Symptoms can include lightheadedness, altered vision, eye or face twitching, jerking or shaking of arms or
legs, disorientation, confusion, momentary loss of awareness, and loss of consciousness or convulsions that can lead to injury from falling down or striking nearby objects.

IMMEDIATELY STOP PLAYING AND CONSULT A DOCTOR IF YOU EXPERIENCE ANY OF THESE SYMPTOMS.

ATTENTION! IMPORTANT WARRANTY INFORMATION

The electronics system, node network architecture, mechanical devices and associated software control systems in this pinball machine are designed to work with genuine
Stern Pinball accessories and devices.

Installation of non-authorized accessories, lamps, LED’s, motors or other devices or modification of electro-mechanical devices may damage the system and will void your
warranty.

Stern Pinball machines are assembled in Elk Grove Village, Illinois, USA. Stern Pinball has inspected each game element to ensure it meets our quality standards.

Each pinball machine has unique characteristics that make it a one-of-a-kind American made product. Each will have variations in appearance resulting from differences
in the machine’s particular wood parts, individual printed art and mechanical assemblies. No playfield is perfectly flat and varies depending on the season. Game play will
result in playfield dimpling as the harder steel ball contacts the wood and coating; over time multiple dimples will blend to make them less noticeable. Normal plastic insert
crazing (tiny stress cracks) and ghosting (small cloudy areas around insert edges) are often seen in pinball machines, due to a combination of plastic mold stress, pushing of
inserts into purposely undersized holes, and heating and breaking of inserts’ plastic “skin” when the playfield is sanded.

© MARVEL. All Rights Reserved.

Games configured for North America operate on 60 cycle electricity only. These games will not operate in countries with 50 cycle electricity (Europe, UK, Australia).

MANUAL #780-50Y5-00
THE UNCANNY X-MEN PRO #500-55Y5-01
1-800-KICKERS - [email protected]
www.sternpinball.com - facebook.com/sternpinball


TABLE OF CONTENTS
1. Setup and Moving................................... 3 5.17 Flipper Button - Yellow With Red Housing....................46
1.1 First-Time Setup Instructions..........................................3 5.18 Ramp Diverter Coil Assembly........................................46
1.2 Adjustments Menu..........................................................6 5.19 Back Ramp Diverter Assembly......................................46
1.3 Game Pricing Reference Table........................................7 5.20 Magnet Assembly..........................................................47
1.4 Transporting the Game....................................................8 5.21 Top Left Ramp Opto Assembly.....................................47
1.5 Maintenance....................................................................9 5.22 Left Opto Assembly.......................................................47
1.6 Maintenance Kits.............................................................9 5.23 Spotlight Assembly .....................................................47
1.7 Common Parts................................................................9 5.24 Upper Left Loop Opto Assembly .................................48
5.25 Upper Loop Gate Assembly .........................................48
2. SPIKE System and Node Guide........... 10 5.26 Left Lane Rollunder Assembly .....................................48
2.1 SPIKE System Overview...............................................10 5.27 Top Launch One Way Assembly .................................48
2.2 Node Bus Cabling.........................................................10 5.28 Cerebro Lock Coil Assembly.........................................49
2.3 System Power...............................................................10 5.29 Cerebro Lock Diverter Assembly...................................49
2.4 SPIKE Node Addresses.................................................10 5.30 Bottom Launch One Way Assembly ...........................49
2.5 SPIKE Node Programming............................................11 5.31 Ball Guide Assembly -01...............................................50
2.6 SPIKE System Terminology...........................................11 5.32 Ball Guide Assembly -05...............................................50
2.7 Common SPIKE Node Boards......................................11 5.33 Ball Guide Assembly -08...............................................50
5.34 Ball Guide Assembly -10...............................................50
3. Light, Switch, and Driver Reference.... 12 5.35 Lower Right Metal Ramp Assembly..............................51
3.1 SPIKE Node Boards......................................................12 5.36 Up Post Assembly.........................................................51
3.2 Driver Reference............................................................13 5.37 Left Metal Ramp Assembly...........................................51
3.3 Switch Reference..........................................................15 5.38 Right Ramp Assembly...................................................52
3.4 Light Reference.............................................................19 5.39 Right Ramp Extension Assembly..................................52
5.40 Upper Left Plastic Ramp Assembly..............................53
4. Electronic Pinouts and Schematics.... 26 5.41 DR Plastic Ramp Assembly...........................................53
4.1 SPIKE-2 CPU Node 0....................................................26 5.42 DR Wire Ramp Assembly..............................................54
4.2 Cabinet Node 1.............................................................28 5.43 Crossover Wire Ramp Assembly...................................54
4.3 Lower Playfield 48V Driver Pinout Node 8....................29 5.44 Wolverine Assembly......................................................54
4.4 Mid Upper Playfield 48V Driver Pinout Node 9.............30 5.45 Plastic 02 Assembly......................................................55
4.5 Center Mid LED Board 8b.............................................31 5.46 Plastic 08 Assembly......................................................55
4.6 Center Mid Right LED Board 8b1..................................32 5.47 Plastic 09 Assembly......................................................55
4.7 Bottom Left Board 8b2..................................................32 5.48 Plastic 12 Assembly......................................................56
4.8 Center Mid Board 8b3...................................................32 5.49 Plastic 16 Assembly......................................................56
4.9 T LED Board 8b4...........................................................32 5.50 Plastic 18 Assembly......................................................56
4.10 T LED Board 8b5...........................................................33 5.51 Plastic 21 Assembly......................................................57
4.11 LED Board 8b6..............................................................33 5.52 Plastic 22 Assembly......................................................57
4.12 LED Board 8b7..............................................................33 5.53 Plastic 23 Assembly......................................................58
4.13 Top Center LED Board 9a..............................................33 5.54 Plastic 32 Assembly......................................................58
4.14 T LED Board 9a1...........................................................34 5.55 Plastic 34 Assembly......................................................59
4.15 Center Mid Board 9b2...................................................34 5.56 Plastic 40 Assembly......................................................59
4.16 Top Left LED Board 9b..................................................34 5.57 Plastic 43 Assembly......................................................59
4.17 T LED Board 9b1...........................................................35 5.58 Plastic 82 Assembly......................................................60
4.18 Trough Serial Opto Transmitter......................................35 5.59 Plastic 85 Assembly......................................................60
4.19 Trough Serial Opto Receiver 8a.....................................35 5.60 Plastic assembly 87.......................................................61
4.20 Main Power Supply.......................................................35 5.61 Sentinel Head Assembly...............................................61
4.21 Power Distribution Board..............................................36 5.62 Sentinel Head Carriage Assembly.................................62
4.22 Power Plug Wiring.........................................................36 5.63 Top Plate Sub-Assembly...............................................63
5.64 Bottom Plate Sub-Assembly.........................................63
5. Parts Reference..................................... 37 5.65 Head Frame Assembly..................................................63
5.1 Playfield Rubber Parts...................................................37 5.66 Sentinel Kicker Target Assembly...................................64
5.2 Rubber Size Chart.........................................................37 5.67 Sentinel Tilting Head Assembly.....................................64
5.3 Playfield Assemblies, Top..............................................38 5.68 Sentinel Chin Assembly.................................................65
5.4 Playfield Assemblies, Bottom........................................39 5.69 Sentinel Chin Sub-Assembly.........................................65
5.5 Backbox Parts...............................................................40 5.70 Kick Target Arm Assembly............................................65
5.6 Speaker Panel Parts......................................................40 5.71 Beaker Leaper Assembly..............................................66
5.7 Cabinet Parts.................................................................41 5.72 Beaker Lever Assembly.................................................66
5.8 Ball Shooter Assembly..................................................42 5.73 Leaping Liquid Assembly..............................................66
5.9 Lockdown Bar ..............................................................42 5.74 Ramp Light Assembly...................................................66
5.10 Auto Launch Assembly..................................................42 5.75 Back Panel Assembly....................................................67
5.11 Ball Trough Assembly....................................................43
5.12 Slingshot Assembly.......................................................43 6. Specifications........................................ 68
5.13 Flipper Assembly, Left & DR..........................................44 6.1 Game Dimensions.........................................................68
5.14 Flipper Assembly, Right.................................................44 6.2 Warranty........................................................................69
5.15 Pop Bumper Assembly..................................................45 6.3 Warnings, Compliance, and Legal Notices...................69
5.16 Bottom Arch Assembly..................................................46 6.4 Stern Pinball End User License Agreement..................70

2 THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01

 SETUP AND MOVING

1. SETUP AND MOVING CAUTION: AT LEAST TWO (2)

1.1 FIRST-TIME PEOPLE ARE REQUIRED TO
MOVE AND MANEUVER THE
SETUP INSTRUCTIONS TOOLS REQUIRED GAME. USE PROPER MOVING
Your brand new Stern Pinball Machine is EQUIPMENT AND EXTREME
• 5/8” Socket Wrench
carefully packed for safety and security. CARE WHILE HANDLING. STERN
• Utility Knife
For your safety, exercise caution and use PINBALL MACHINES WEIGH
the correct tools and sufficient help when • Snips
OVER 250LBS BOXED.
setting up your new game. • An Assistant
2
2
7
5 5
7

3. Remove the four (4) foam pieces 6. Let the face fall forward and
1. Locate the side labeled “TRUCK and two (2) narrow box tubes remove the entire side by carefully
THIS SIDE ONLY”. The bottom of which contain the four (4) identical cutting the bottom.
the game faces this side. legs with levelers. 7. With the game still in its folded
2. Open the top box flaps by pulling 4. DO NOT CUT STRAPPING YET. position, use a ⅝” wrench to
hard in an upward motion on each Keep backbox secured in the loosen and remove the 2 leg bolts
flap. If the flaps are taped, cut the down position. on each side of the front cabinet.
tape first, taking care to avoid the 5. With the utility knife, carefully cut Ensure the leg levelers are screwed
box staples. down the left and right corners of all the way into the legs.
the box.
8
8

15

14

9 14

11

11

12. Using supports or two people,

8. Install front legs using the bolts 10. Set aside the open box. prop the rear of the cabinet up.
removed from the cabinet. Secure 11. With a ⅝” socket wrench, loosen 13. Ensure the rear leg levelers are
tightly. and remove the 2 leg bolts on screwed all the way into the legs.
9. Have someone help you carefully each side of the rear cabinet, 4 14. Install rear legs using the 4 bolts
set the game down on the front total. removed from step 11.
legs.

THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01 3

SETUP AND MOVING

FIRST-TIME SETUP CONTINUED

21

17

19

15. Cut nylon strapping and remove 18. Open the front coin door. 21. Store the backbox keys, if desired,
protective strap corner guards. 19. Reach into the game and remove on the metal hook located in the
16. Locate the factory keys, either on the retaining clip at the rear of the coin door.
the shooter rod or taped to the cash box. 22. Locate and remove the pinballs,
playfield glass. 20. Remove the cash box lid by sliding plumb bob, and backbox bolts
17. Using snips, cut the tie-wrap it toward you. from the cash box.
securing the keys if required. One 23. Replace the cash box lid and
set of keys is for the front coin retaining clip for future use.
door, the other set of keys is for
accessing components in the
backbox.

25

26
27 27

27. Reach inside the cabinet and lift 29. Remove the playfield glass by
the two latches located on either sliding it toward you and carefully
side of the coin door. place it in a safe location.
28. Remove the front top molding. Remove all playfield shipping
24. Locate the two (2) backbox bolts in tie downs, shipping blocks,
the cash box. and packing foam, and follow
25. Carefully raise backbox to upright any game-specific unpacking
position while ensuring that cables instructions included in the
are not pinched. playfield, if present.
26. Use the ⅝” wrench to Install the
two (2) backbox bolts to secure the
backbox as indicated on the back
of the cabinet.
CAUTION: PLAYFIELD GLASS IS MADE FROM HIGH-STRENGTH TEMPERED
GLASS. TEMPERED GLASS IS SENSITIVE TO EXTREME TEMPERATURE
SHIFTS AND CORNER NICKS, WHICH CAN CAUSE THE GLASS TO FAIL
CATASTROPHICALLY. TAKE CARE TO STORE THE GLASS ON A SOFT, ROOM-
TEMPERATURE SURFACE AND PREVENT THE CORNERS FROM BEING DAMAGED.

4 THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01

 SETUP AND MOVING

FIRST-TIME SETUP CONTINUED

30. If pinballs were already installed into the lower ball
trough, remove them before lifting the playfield.
SPIKE PINBALL SOFTWARE
31. Grasp the lower arch between the flippers, and firmly
but gently pull directly up to raise the playfield 8 to 12
UPDATE INSTRUCTIONS
inches. 1. Obtain game software update file (filename ends
32. While holding the playfield up, pull the playfield toward in “.spk”) from www.sternpinball.com or from
you until the two playfield supports are over the front authorized Stern distributor.
edge of the cabinet. 2. Place game software update file ( “.spk”) in root
33. Rest the playfield on the front edge of the cabinet. directory of a blank FAT32-formatted USB flash
34. Raise the playfield and rest it against the backbox. drive
35. Visually inspect all cabinet cables and connector 3. Use backbox power switch to turn off game
terminations; ensure no wires or cables are pinched and 4. Plug in USB flash drive to CPU board USB
that cable harnesses are not pulled tight. connector (CN20 or CN21). Refer to www.
36. Locate the plumb bob in the parts bag in the cash box. sternpinball.com
37. Slide plumb bob onto the hanger wire. Note: the vertical 5. Turn on game
position of the plumb bob affects tilt sensitivity - higher 6. The game will automatically begin software
makes the game more sensitive to tilting. update
38. Tighten the thumb screw finger-tight. 7. Select the correct .spk update file from list.
39. Install the correct number of pinballs. Refer to the decal 8. Press Enter on the service switches to start
on the lock down assembly for the correct number of update
pinballs. 9. When the display indicates “Update Complete”,
turn off game
10. Remove USB flash drive from CPU board
LOCATING, LEVELING, AND FINAL SETUP 11. Turn game on to complete the update and play
pinball!
1. Select a location that is indoors, out of direct sunlight,
12. Detailed instructions and troubleshooting tips LCD BACKBOX
5009995-XX
and climate controlled. Excessive moisture/humidity
are available in the game manual, www.sternpin-
can cause long-term damage to your game.
ball.com and authorized Stern distributors.
2. Adjust the front or rear levelers as necessary to position
the playfield level bubble, located on the front right of
the playfield next to the shooter lane, to float between
the two (2) black lines. This will place the playfield at POWER SWITCH
the recommended 6.5° pitch. Playfield angles greater
than 6.5° can be achieved by turning out the rear leg The game’s power switch is located on the right-hand side
leveler(s) for increased difficulty and faster gameplay. underneath the backbox.
3. Use a pinball to roll down the center of the playfield for
side-to-side leveling, or use an external bubble level,
digital level, or smartphone level app.
4. Plug into a grounded outlet and check for proper
operation through DIAGNOSTICS.
5. Check the coin door: With the door closed, insert coins
to verify proper operation.
6. Play game: Check for satisfactory operation and adjust
game volume (push the Red Buttons inside the Coin
Door).
7. If desired, perform any game diagnostics, game
adjustments, and pricing settings at this time.

ON/OFF Switch

THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01 5

SETUP AND MOVING

1.2 ADJUSTMENTS MENU

STANDARD ADJUSTMENTS Go to the S.P.I. icon. Press SELECT.
STANDARD ADJUSTMENT #1 appears with the adjustment
Perform the below steps to review the adjustments.
name flashing. While the adjustment name is flashing press [<]
Enter the Service Menu, then enter the Standard Adjustments [>] to move between adjustments.
Menu.
To change the adjustment setting press SELECT. While the
Press SELECT to access the Service Menu. Press BACK to exit adjustment setting is flashing, press [<] [>] repeatedly until
or escape at any time. the desired setting appears. Press the SELECT button to
“install” the change. The adjustment comment (bottom line) will
Press [>]. Go to the ADJ icon. Press SELECT.
indicate if the factory default setting is selected or will display
INSTALLED if the change is not a factory default setting.
ID Adjustment Name Default Setting 37 HIGH SCORE #2 40,000,000 71 DJ MIXER PLAYLIST MODE ORDERED
1 FREE PLAY NO 38 HIGH SCORE #3 30,000,000 PLAYBACK
2 GAME PRICING USA 11 39 HIGH SCORE #4 25,000,000 72 DJ MIXER PLAYLIST REPEAT YES
3 REPLAY TYPE AUTO 40 HSTD INITIALS 3 INITIALS 73 LOCATION ID 0
4 REPLAY PERCENTAGE 10% 41 HSTD RESET COUNT 2000 74 GAME ID 0
5 REPLAY AWARD CREDIT 42 LANGUAGE ENGLISH 75 TIME FORMAT 12-HOUR
6 REPLAY LEVELS 1 43 PLAYER LANGUAGE SELECT YES 76 PRICING FORMAT STANDARD
7 AUTO REPLAY START 150,000,000 44 CUSTOM MESSAGE ON 77 CREDIT FORMAT REDUCED
FRACTION
8 DYNAMIC REPLAY START 150,000,000 45 KNOCKER VOLUME NORMAL
78 COIN INPUT DELAY 30
9 REPLAY LEVEL #1 150,000,000 46 START GAME ON CREDIT OFF
79 COIN ACCEPTOR MECHANICAL
10 REPLAY LEVEL #2 175,000,000 47 START BUTTON BEHAVIOR ALL LOGGED
IN 80 LOST BALL RECOVERY YES
11 REPLAY LEVEL #3 225,000,000
48 GAME RESTART YES 81 COIN DOOR DISABLE TILT NO
12 REPLAY LEVEL #4 350,000,000
49 GAME MODE ON START STANDARD 82 COIN DOOR OPEN NODEBUS YES
13 REPLAY BOOST YES
POWER
14 SPECIAL LIMIT 1 50 INSIDER LOGIN TIMER 30
83 PLAY ATTRACT TUTORIAL YES
15 SPECIAL PERCENTAGE 10% 51 INSIDER PLAY AGAIN TIMER 20
VIDEOS
16 SPECIAL AWARD CREDIT 52 USE INSIDER HOME TEAM NEVER
84 FRONT VOLUME KNOB HEADPHONES
17 FREE GAME LIMIT 5 53 ENABLE HOME TEAM IN NO VOL. ONLY
COINPLAY
18 EXTRA BALL LIMIT 5 85 MUTE IF HEADPHONES YES
54 HOME TEAM GUEST RETENTION UNTIL POWER DETECTED
19 EXTRA BALL PERCENTAGE 25%
OFF
20 MATCH PERCENTAGE 9% 86 MUTE KNOCKER IF HP NO
55 DISPLAY MESSAGE OF THE DAY YES DETECTED
21 MATCH AWARD CREDIT
56 START BUTTON ATTRACT MODE BLINKING 87 DISABLE Q24 KNOCK IF HP NO
22 BALLS PER GAME 3 ILLUM. DETECTED
23 MAX PLAYERS PER GAME 4 57 ALLOW LEFT+START TO END ALWAYS 88 GI LED BRIGHTNESS 100%
24 TILT WARNINGS 2 GAME
89 GI LED MAX BRIGHTNESS 255
25 TILT DEBOUNCE 750 58 BALL SAVE TIME 0:12
90 INSERT LED BRIGHTNESS 100%
26 CREDIT LIMIT 30 59 TARGET GAME TIME 1:45
91 INSERT LED MAX BRIGHTNESS 255
27 REMOVE FRACTIONAL CREDITS NEVER 60 TIMED PLUNGER OFF
92 FLASHER LED BRIGHTNESS 100%
28 ALLOW HIGH SCORES YES 61 FLIPPER BALL LAUNCH OFF
93 FLASHER LED MAX 255
29 HIGH SCORE AWARD CREDIT 62 COINDOOR BALL SAVER NO BRIGHTNESS
30 GRAND CHAMPION AWARDS 1 63 COMPETITION MODE NO 94 CABINET LED BRIGHTNESS 100%
31 HIGH SCORE #1 AWARDS 0 64 Q24 OPTION COIN METER 95 LCD DISPLAY BRIGHTNESS 7
32 HIGH SCORE #2 AWARDS 0 65 TICKET DISPENSER NONE 96 ATTRACT MODE B.BOX 100%
33 HIGH SCORE #3 AWARDS 0 66 PLAYER GAME MODE YES BRIGHTNESS
34 HIGH SCORE #4 AWARDS 0 67 PLAYER COMPETITION MODE YES 97 GAME PLAY B.BOX 100%
68 PLAYER CHALLENGE MODE YES BRIGHTNESS
35 GRAND CHAMPION SCORE 60,000,000
69 PLAYER COOPERATION MODE YES 98 SERVICE MENU B.BOX 5%
36 HIGH SCORE #1 50,000,000
BRIGHTNESS
70 DJ MIXER MODE YES

FEATURE ADJUSTMENTS
Each table has feature adjustments specific to the Go to the game icon. Press SELECT.
characteristics of that game. To access feature adjustments FEATURE ADJUSTMENT #1 appears with the adjustment name
enter the Service Menu and then enter the Adjustments Menu. flashing. With the adjustment name flashing press [<] [>] to
Press SELECT to access the Service Menu. Press BACK to exit move between adjustments. Feature adjustments are changed
or escape at any time. similarly to standard adjustments using the SELECT button
to choose options and the [<] [>] buttons to cycle through
Press [>]. Go to the ADJ icon. Press SELECT. available settings.

6 THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01

 SETUP AND MOVING

1.3 GAME PRICING REFERENCE TABLE

Unit per Coin Door Pulse Settings
Country ID Pricing (Credits / Cost)
Pulse Left Center Right 4th 5th 6th
1 1/$1.00 AU 3/$2.00 AU
2 1/$1.00 AU
Australia 3 1/$2.00 AU $0.10 AU 2 10 20 50 5 0
4 1/$2.00 AU 2/$4.00 AU 3/$5.00 AU
5 1/$2.00 AU 2/$3.00 AU
1 1/$0.50 CN 2/$0.75 CN 3/$1.00 CN $0.25 CN 1 1 4 8 0 0
Canada
2 1/$1.00 CN 3/$2.00 CN $1.00 CN 1 1 2 2 0 0
1 1/5 Yaun 3/10 Yuan
China 1 Yuan 1 1 1 0 0 0
2 1/10 Yaun 2/15 Yuan
Croatia 1/3 kuna 2/5 kuna 1 kuna 1 2 5 1 0 0
1 1/3 DKr 2/5 DKr
2 1/2 DKr 2/4 DKr 3/5 DKr 4/7 DKr 5/9 DKr 7/10 DKr
3 1/5 DKr
Denmark 1 DKr 1 5 10 20 0 0
4 1/10 DKr
5 1/20 DKr
6 1/10 DKr 3/20 DKr
1 1/EUR 0.50
2 1/EUR 0.50 2/EUR 1.00 3/EUR 1.50 5/EUR 2.00
3 1/EUR 0.50 3/EUR 1.00
Electronic 5 10 20 2 0 0
4 1/EUR 1.00 2/EUR 2.00 3/EUR 3.00 5/EUR 4.00 EUR 0.10
5 1/EUR 1.00 3/EUR 2.00
6 1/EUR 1.00 2/EUR 1.50 3/EUR 2.00
Euro
7 1/EUR 1.00 3/EUR 2.00 7/EUR 3.00
8 1/EUR 1.00 4/EUR 2.00
9 2/EUR 1.00 4/EUR 2.00 6/EUR 3.00 9/EUR 4.00
Mechanical 5 1 5 1 0 0
10 1/EUR 2.00 2/EUR 3.00 3/EUR 4.00 EUR 0.10
11 1/EUR 2.00 2/EUR 4.00 3/EUR 5.00
12 1/EUR 2.00 3/EUR 4.00 7/EUR 6.00
1 1/20000 Rp 2/40000 Rp 3/50000 Rp 4/60000 Rp 5/80000 Rp 8/100000 Rp
Indonesia 2 1/20000 Rp 2/40000 Rp 4/50000 Rp 5/60000 Rp 6/80000 Rp 10/100000 Rp 10,000 Rp 0 0 0 0 0 1
3 2/20000 Rp 4/40000 Rp 6/50000 Rp 8/60000 Rp 10/80000 Rp 13/100000 Rp
1 1/YEN 100
Japan 2 1/YEN 100 3/YEN 200 Yen 100 1 1 1 1 0 0
2 1/YEN 200
Lithuania 1/2 LTL 1 LTL 1 2 5 0 0 0
Middle East 1/1 token 1 token 1 1 1 1 0 0
1 1/$1 NZ
New Zealand 2 1/$1 NZ 3/$2 NZ $1 NZ 1 1 2 1 0 0
3 1/$2 NZ 2/$3 NZ
1 1/10 NKr
2 1/10 NKr 3/20NKr
Norway 3 1/20 NKr 1 NKr 1 5 10 20 0 0
4 1/20 NKr 3/40 NKr
5 1/5 NKr
Russia 1/5 RUB 1 RUB 10 5 1 1 0 0
1 1/R2
South Africa R 0.50 1 2 4 10 0 0
2 1/R3 2/R5
1 1/10 SKr 2/15 SKr 3/20 SKr
2 1/5 SKr
Sweden 3 1/10 SKr 1 SKr 1 5 10 2 0 0
4 1/20 SKr
5 1/10 SKr 3/20 SKr
1 1/1 SwF 2/2 SwF 3/3 SwF 4/4 SwF 6/5 SwF
Switzerland 1 SwF 1 2 5 1 0 0
2 1/2 SwF 2/4 SwF 3/5 SwF
Taiwan 1/10 TWD 10 TWD 1 1 1 1 0 0
1 1/2.00
2 1/1.00
UK 3 1/50p 2/1.00 3/1.50 5/2.00 10p 1 5 10 2 20 0
4 1/2.00 2/3.00 4/5.00
5 1/1.00 3/2.00
1 1/$0.25
2 1/$0.50 2/$0.75 3/$1.00
3 1/$0.50
5 1/$0.50 2/$1.00 3/$1.50 5/$2.00
7 1/$0.50 2/$1.00 4/$1.50 6/$2.00
USA 8 1/$0.50 3/$1.00 $0.25 1 4 1 1 0 0
9 1/$1.00
10 1/$0.75 2/$1.50 3/$2.00
11 1/$1.00 3/$2.00
12 1/$0.25 2/$0.50 3/$0.75 5/$1.00
13 1/$1.00 2/$2.00 3/$3.00 4/$4.00 7/$5.00

THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01 7

SETUP AND MOVING

1.4 TRANSPORTING THE GAME

When transporting the game, such as in the back of a truck or with a hand truck, the CAUTION
game’s backbox must be secured to prevent damage to the side rails.
NEVER TRANSPORT THE GAME
IN A MOVING VEHICLE WITH THE
BACKBOX RAISED! TWO PEOPLE
1. SECURE THE BACKBOX ARE REQUIRED TO REMOVE THE
1. Ensure that the pinballs are removed
TOOLS REQUIRED LEGS!
from the playfield, and secure any • STRAP (500LB OR GREATER)
free-moving mechanisms that may • AN ASSISTANT
get damaged in transport • HAND TRUCK
2. REMOVE THE LEGS AND
STAND UP
3

6
4

2. Remove the backbox securing 4. Securely strap the back box to the 6. Remove the legs, rear legs first. Use
bolts game a stool or a friend to support the
3. Carefully lower the backbox onto 5. The game may be transported rear of the game.
the side rails. Use a piece of with the legs on. If the legs must 7. Rest the rear of the game on the
cardboard or suitable padding be removed, follow the remaining ground.
between the backbox and the steps.
game.

8. Stand the game up on its back. 9. Remove the front two legs. 10. Secure all loose parts and
transport with a hand truck in the
upright position.

8 THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01

 SETUP AND MOVING

1.5 MAINTENANCE
REGULAR MAINTENANCE - COMMON PINBALL TOOLS
(MONTHLY/500 GAMES) • Common nut drivers (1/4”, 5/16”, 11/32", 3/8”)
• Phillips screwdriver
• Remove the playfield glass
• Standard Allen wrench/Hex key set
• Enter the software diagnostics menu, start lamp test, then
clean and wax the playfield. • 5/8” Socket with ratchet
• While cleaning the playfield, identify and repair • Adjustable wrench (5/8" & 9/16")
malfunctioning lights, loose parts, cracked plastics and • 6" Torpedo Level (or use a pinball
worn rubber parts. • Flashlight or headlamp
• While in diagnostics, enter the switch test (Select the "SW" • Soldering Iron (60w with flat tip), lead-free solder
Icon, then "TEST" Icon). • Wire cutter
• Use a pinball to actuate all switches and verify the • Wire stripper
correct switch registers with the switch test. • Long nose (“needle nose”) pliers
• The game will play a sound to confirm the switch.
• Lift the playfield and inspect all assemblies for loose parts,
broken wires or excessive wear. Look at the bottom of the 1.6 MAINTENANCE KITS
cabinet for any parts that may have worked loose, then find
Description Part Number
the source.
The Uncanny X-Men Playfield Plastics Kit 803-5000-Y5
• Check all coin door mechanisms and bill acceptor (if
The Uncanny X-Men Playfield Decals Kit 802-5000-Y5
installed) for proper operation
The Uncanny X-Men Backbox Decal Left 820-76Y5-01
• Play the game to ensure all coils and features are working
The Uncanny X-Men Backbox Decal Right 820-76Y5-02
• Check the playfield to ensure it is level and set to the
The Uncanny X-Men Cabinet Decal Left 820-76Y5-03
proper pitch using the bubble level on the right side wood
rail. The Uncanny X-Men Cabinet Decal Right 820-76Y5-04
• Check game audits: Replay % and Ball Time and note The Uncanny X-Men Cabinet Decal Front 820-76Y5-05
abnormal values which can indicate problems. The Uncanny X-Men Playfield, Bare 830-5100-Y5
• Ensure game volume is set appropriately for the location. The Uncanny X-Men Translite 830-8427-Y5
• Clean both sides of the playfield glass and reinstall.
• Check and clean pinballs and replace if excessively worn or
scuffed. Dirty pinballs accelerate game wear.
1.7 COMMON PARTS
Description Part Number
OVERHAUL MAINTENANCE - (5000 GAMES) 8 oz Pinball Playfield wax (Novus # 2) 675-0003-01
• Verify latest game software is installed Standard Pinball, 1-1/16 in 260-5000-00
• Check flippers for excessive wear. Excessive flipper Flipper Rebuild Kit Left (Standard) 500-6307-10
sloppiness (vertical or horizontal) or weakness indicates a Flipper Base Plate Kit Left 515-6617-01
flipper rebuild is required. Flipper Rebuild Kit Right 500-6307-00
• Clean machine inside and out and check leg levelers for Flipper Base Plate Kit Right 515-6617-00
free operation. Memory Card - SD 16GB 970-0140-16
• Visual check for loose or broken playfield and cabinet parts Memory Card - MicroSD 970-0141-32
and repair as necessary. Wi-Fi Adapter 509-2013-00
• Electrical check: Plug into grounded outlet and check for
proper operation through DIAGNOSTICS.
• Replace worn or dirty rubbers.
• Replace pinballs.
• Check all playfield switches with a pinball.
• Check all settings (refer to manual for factory settings).
• Check coin door: With door closed, insert coins to verify
proper operation.
• Check for proper adjustment of the plumb bob tilt.
• Play game: Check for satisfactory operation.

THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01 9

SPIKE SYSTEM AND NODE GUIDE

2. SPIKE SYSTEM AND NODE GUIDE

2.1 SPIKE SYSTEM OVERVIEW 2.3 SYSTEM POWER
The SPIKE Pinball system is a rugged, distributed, and The SPIKE System is powered from an 48V DC power supply
embedded platform custom-designed for the rigors of the pinball bus. Each SPIKE node converts this voltage to lower voltages
machine environment. SPIKE takes advantage of modern required by the node and its specific components. A SPIKE 48V
technologies to deliver an immersive pinball experience that node typically controls high-power outputs such as game coil
supports modern features, reduces cabling, and increases mechanisms and high-brightness LEDs. These powered nodes
serviceability and reliability. are supplied directly with 48V system power. SPIKE standard I/O
nodes are low-power nodes that read switch inputs and output to
A Stern Pinball machine based on the SPIKE system will have at
standard-brightness LEDs. Standard I/O nodes use the node bus
least two nodes networked together with the SPIKE node bus,
power, which is supplied by the main CPU node over the node
a custom industrial pinball control bus that is designed around
bus modular jack connectors.
industry standards and optimized for the pinball environment.
The primary CPU node is networked to one or more input/output
nodes over standard Category 5 UTP (unshielded twisted pair)
ethernet cabling.
2.4 SPIKE NODE ADDRESSES
Each SPIKE node has a unique address ranging from 0 to 15. Not
There are five primary types of nodes that are found in the game. all addresses are used in all games. Nodes can be of the same
• CPU node (Node 0) - The primary node that controls other part number, so the address is specified on the DIP switches on
nodes in the system. Contains the primary game software each node. When replacing a node, be certain that the correct
for the system and provides SPIKE node bus power for other address is set. Nodes can have 3-position and 4-position DIP
nodes. switches. Refer to the appropriate table to set the address for
• Cabinet 48V node (Node 1) - Specialized node with specific each type of Node. The correct address for a node can be found
inputs and outputs for coin doors, tilt mechanisms, and other in the SPIKE node reference section of the manual or in the game
bottom-cabinet devices. diagnostic software. Address 0 is reserved for the backbox CPU
• 48V playfield node - Controls high power devices such as node, where the game software resides. Address 1 is reserved for
coils and flashers, and also supports a few switch and low- the cabinet node, located inside the coin door. These two nodes
power outputs. Powered by the system 48V power supply. do not have DIP switches as their address is not configurable.
• Light and switch node - High-density switch and low-power
Address 1 2 3
LED outputs, bus-powered from the node bus. These boards
contain as many 32 switch inputs and light outputs. 8 OFF OFF OFF
9 OFF OFF ON
• Node extensions - These sub-nodes add additional low-
power input and outputs to a specific Power or I/O node and 10 OFF ON OFF
are connected with simple serial bus. 11 OFF ON ON
12 ON OFF OFF

2.2 NODE BUS CABLING 13

14
ON
ON
OFF
ON
ON
OFF
The SPIKE node bus utilizes standard Ethernet-style RJ45 8-pin 15 ON ON ON
modular jacks, and off-the-shelf Category 5e or better ethernet
SPIKE node addresses for nodes with 3-position DIP switches.
cabling. The node bus is electrically different from Ethernet
Addresses 0-7 are not used by SPIKE nodes with 3-position DIP
and does not utilize Ethernet or TCP/IP protocols or signaling
switches.
standards. SPIKE nodes are not compatible with standard
computer networking equipment. Address 1 2 3 4
CAUTION: Plugging a SPIKE Node or CPU board into a standard 8 OFF OFF OFF OFF
Ethernet port may damage one or both devices and void your 9 OFF OFF ON OFF
warranty. 10 OFF ON OFF OFF
11 OFF ON ON OFF
12 ON OFF OFF OFF
13 ON OFF ON OFF
14 ON ON OFF OFF
15 ON ON ON OFF
SPIKE node addresses for nodes with 4-position DIP switches.
Addresses 0-7 are reserved for fixed-function nodes and do not
require configuration.

10 THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01

 SPIKE SYSTEM AND NODE GUIDE

SPIKE SYSTEM AND NODE GUIDE CONTINUED

2.5 SPIKE NODE PROGRAMMING INPUT/OUTPUT PROTECTIONS
The SPIKE nodes are smart nodes that have on-board SPIKE features built-in short-circuit, static electricity, and other
processors and run embedded code. The nodes are programmed protections to maximize reliability. If an LED, coil or other device
automatically by the CPU node whenever software updates are shorts, it will be disabled but will not shut down the entire system
installed to the CPU. When replacing a node, the CPU node will in most circumstances. Groups of LEDs, coils, and switches often
detect and update the node to the latest software with no user share common power supplies or other circuits, so it is possible
intervention. Always replace nodes with the power to the game that a bad device will affect the group of related devices and
turned OFF. require removal or repair to fix the group. The system diagnostics
will inform the technician of shorted or otherwise malfunctioning
devices whenever possible. While the system is protected against
2.6 SPIKE SYSTEM TERMINOLOGY permanent damage, it is strongly recommended to repair or
replace these bad components as soon as possible to minimize
MULTI GENERAL ILLUMINATION LIGHTING downtime and maximize game earnings.
General Illumination Lighting is two or more lights powered by
one control source. These are often a number of LEDs connected
in parallel and the system controls these as one large LED. A
2.7 COMMON SPIKE NODE BOARDS
missing LED will not affect these circuits, however a shorted LED Description Type Part Number
can cause the entire string of LEDs to turn off. SPIKE CPU Node Node 509-1003-01
Cabinet Node Node 520-6967-72
SINGLE LIGHTS Playfield 48V Core-Driver Node Node 520-1070-00
520-1057-00
Single lights and LEDs are direct-controlled from SPIKE node
boards. A common power source is grounded by individual Trough Serial Opto Receiver Extension Extension 520-8516-00
transistors to turn individual LEDs on and off. Groups of LEDs, QR Scanner Assembly Assembly 509-2020-00
usually by node connector, share a common power source, so if
a group of LEDs is out, check the wiring for the power source.

FLASHERS
SPIKE games treat flashers the same as single LEDs that draw
more power. Flashers are controlled from the same circuits that
power regular lights.

DRIVERS
A driver is a circuit that controls a high power-device such as a
coil, magnet, or motor. Each device has a common 48V power
source that is then connected to ground by a dedicated control
transistor. Each driver is protected against shorting, static
electricity, and over-current conditions. Take caution as 48V is
always present on a device even when it is not energized.

OPTOS
Certain types of optical switches (“optos”) require external signal
conditioning. For these optos, they will interface to a SPIKE node
via an opto signal conditioning board. Other optical switches
connect directly to the Spike node board.
CAUTION: Unless explicitly directed by an Authorized Stern
Repair technician, perform ALL work on your pinball machine with
the power disabled!

THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01 11

LIGHT, SWITCH, AND DRIVER REFERENCE

3. LIGHT, SWITCH, AND DRIVER REFERENCE

3.1 SPIKE NODE BOARDS

ID DIP Address Description Location Part Number
Node 0 n/a SPIKE 2 CPU Node Backbox 509-1003-01
Node 1 n/a Cabinet Node Cabinet 520-6967-72
Node 4 n/a QR Reader Node Bottom Arch 509-2020-00
Node 8 OFF-OFF-OFF-OFF Core - Driver Node Lower Playfield 520-1070-00 / 520-1057-00
8a n/a Trough Serial Opto Receiver Extension Playfield 520-8516-00
8b n/a 10 Wht - 1 Red Center Mid LED Board Playfield 520-8635-00
8b1 n/a 3 Wht - Center Mid LED Board Playfield 520-8634-00
8b2 n/a 4 Wht - 2 FL Bottom Left LED Board Playfield 520-8638-00
8b3 n/a 3 Wht - Center Mid LED Board Playfield 520-8634-00
8b4 n/a 1 Wht - 2 Red T LED Board Playfield 520-8633-00
8b5 n/a 1 Wht - 2 Red T LED Board Playfield 520-8633-00
8b6 n/a 2 Wht - LED Board Playfield 520-8626-00
8b7 n/a 2 Wht - LED Board Playfield 520-8626-00
Node 9 OFF-OFF-ON-OFF Core - Driver Node Playfield 520-1070-00 / 520-1057-00
9a n/a 3 Wht - 5 Red Top Center LED Board Playfield 520-8637-00
9a1 n/a 1 Wht - 2 Red T LED Board Playfield 520-8633-00
9b n/a 7 Wht - Top Left LED Board Playfield 520-8636-00
9b1 n/a 1 Wht - 2 Red T LED Board Playfield 520-8633-00
9b2 n/a 3 Wht - Center Mid LED Board Playfield 520-8634-00
Node 12 ON-OFF-OFF-OFF Topper (Optional) Topper

12 THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01

 LIGHT, SWITCH, AND DRIVER REFERENCE

3.2 DRIVER REFERENCE

ID Name Node Connector Ret. Ret. Wire Voltage V+ V+ Color Location Type Address Part Number
Pin Pin
1 Trough 8 CN8 7 ORG GRY 48V 1-4 GRY ORG Playfield Coil - 27-1500 8-DR-1 090-5004-ND
2 Auto Plunger 8 CN8 9 ORG WHT 48V 1-4 GRY ORG Playfield Coil - 23-800 8-DR-4 090-5001-ND
3 Left Flipper 8 CN8 6 ORG YEL 48V 1-4 GRY ORG Playfield Coil - 22-1080 8-DR-5 090-5032-ND
4 Right Flipper 8 CN8 5 ORG GRN 48V 1-4 GRY ORG Playfield Coil - 22-1080 8-DR-0 090-5032-ND
5 Right Pop Bumper 8 CN8 11 ORG BLU 48V 1-4 GRY ORG Playfield Coil - 26-1200 8-DR-3 090-5044-ND
6 Right Slingshot 8 CN8 10 ORG VIO 48V 1-4 GRY ORG Playfield Coil - 26-1200 8-DR-2 090-5044-ND
7 Shaker Motor 1 CN16 1 BLU 48V 5 RED Cabinet Motor 1-DR-0 041-5029-04
8 DR Flipper 8 CN7 3 YEL BLK 48V 1 GRY ORG Playfield Coil - 23-900 8-DR-6 090-5020-30-ND
9 Right Return Up Post 8 CN7 4 YEL BRN 48V 1 GRY ORG Playfield Coil - 26-1200 8-DR-7 090-5044-ND
10 Left Pop Bumper 9 CN8 9 ORG RED 48V 1-4 GRY BRN Playfield Coil - 26-1200 9-DR-4 090-5044-ND
11 Sentinel Jaw 9 CN8 10 ORG BLK 48V 1-4 GRY BRN Playfield Coil - 26-1200 9-DR-2 500-7051-08(W/
CONN)
090-5091-00
12 Sentinel Mouth 9 CN8 11 ORG BRN 48V 1-4 GRY BRN Playfield Coil - 26-1200 9-DR-3 500-7051-09(W/
CONN)
090-5091-00
13
14 Magnet 9 CN8 5 BRN RED 48V 1-4 GRY BRN Playfield Coil - 22-650 9-DR-0 511-5065-ND
15
16 Cerebro 9 CN7 3 YEL GRN 48V 1 GRY BRN Playfield Coil - 26-1200 9-DR-6 090-5044-ND
17 Diverter 9 CN8 7 YEL VIO 48V 1-4 GRY BRN Playfield Coil - 26-1200 9-DR-1 090-5044-ND
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33 Coin Meter 1 CN3 2 BLK 12V 1 RED Cabinet Digital Out 1-DR-2 500-9946-00
34 Ticket Meter 1 CN4 2 BLK 12V 1 RED Cabinet Digital Out 1-DR-3 500-9946-00
35 Ticket Dispenser 1 CN11 3 12V 1 Cabinet Digital Out 1-DR-4

Continued on next page...

THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01 13

LIGHT, SWITCH, AND DRIVER REFERENCE

DRIVER REFERENCE CONTINUED

COIL MAP
TREEHOUSE PRO

Figure 3.2.1. Playfield driver locations (top view).

14 THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01

 LIGHT, SWITCH, AND DRIVER REFERENCE

3.3 SWITCH REFERENCE

ID Name Node Node Conn. Input Input Wire GND Ground Location Type Address Part Number
Ext Pin Pin Wire
1 DR Bottom Return 8 - CN11 4 LGN RED 11/12 BLK ORG Playfield Rollover 8-SW-17 500-9935-04
2 Left Return Lane 8 - CN11 5 LGN ORG 11/12 BLK ORG Playfield Rollover 8-SW-18 180-5010-04
3 DR Top Return 8 - CN11 8 LGN VIO 11/12 BLK ORG Playfield Rollover 8-SW-21 500-9935-04
4 DR Flipper Tgt 8 - CN11 9 LGN GRY 11/12 BLK ORG Playfield Rollover 8-SW-22 515-9783-00-00
5 Right Return Lane 8 - CN11 6 LGN YEL 11/12 BLK ORG Playfield Rollover 8-SW-19 500-9935-04
6 Right Outlane 8 - CN11 7 LGN BLU 11/12 BLK ORG Playfield Rollover 8-SW-20 500-9935-03
7
8 Right Slingshot 8 - CN10 3 GRY VIO 8 BLK GRN Playfield Leaf 8-SW-29 180-5231-00
9 Left Flipper Button 8 - CN9 4 GRY BRN 7 BLK GRN Cabinet Leaf 8-SW-25 180-5164-01
10 Right Flipper Button 8 - CN9 3 GRY RED 7 BLK GRN Cabinet Leaf 8-SW-24 180-5160-01
11 Left Flipper EOS 8 - CN10 6 GRY YEL 9 BLK GRN Playfield Leaf 8-SW-16 180-5149-00
12 Right Flipper EOS 8 - CN10 5 GRY GRN 9 BLK GRN Playfield Leaf 8-SW-31 180-5149-00
13 DR Left Flipper Button 8 - CN9 6 VIO 7 BLK VIO Playfield Leaf 8-SW-27 180-5164-01
14
15 Trough 6 8 8a CN14 - - Playfield Opto 8-SW-32 520-5344-00 tx
520-8516-00 rx
16 Trough 5 8 8a CN14 - - Playfield Opto 8-SW-33 520-5344-00 tx
520-8516-00 rx
17 Trough 4 8 8a CN14 - - Playfield Opto 8-SW-34 520-5344-00 tx
520-8516-00 rx
18 Trough 3 8 8a CN14 - - Playfield Opto 8-SW-35 520-5344-00 tx
520-8516-00 rx
19 Trough 2 8 8a CN14 - - Playfield Opto 8-SW-36 520-5344-00 tx
520-8516-00 rx
20 Trough 1 8 8a CN14 - - Playfield Opto 8-SW-37 520-5344-00 tx
520-8516-00 rx
21 Trough Jam 8 8a CN14 - - Playfield Opto 8-SW-38 520-5344-00 tx
520-8516-00 rx
22 Shooter Lane 8 - CN10 2 GRY WHT 7 BLK GRN Playfield Micro 8-SW-28 180-5157-01
23 DR Flipper EOS 8 - CN12 8 PNK BLK 10 BLK RED Playfield Leaf 8-SW-14 180-5149-00
24 Right Outlane Drain 8 - CN11 10 LGN WHT 11/12 BLK ORG Playfield Leaf, Target 8-SW-23 500-9935-04
25
26
27
28
29
30 DR Tgt 8 - CN12 2 WHT BRN 10 BLK RED Playfield Leaf, Target 8-SW-8 515-9784-00-00
31 DR 10pt Sw 8 - CN12 3 WHT RED 10 BLK RED Playfield Leaf 8-SW-9 180-5231-00
32 DR Ramp Tgt 8 - CN12 4 WHT ORG 10 BLK RED Playfield Leaf, Target 8-SW-10 515-9785-00-00
33 Drain Tgt 8 - CN12 5 WHT YEL 10 BLK RED Playfield Leaf, Target 8-SW-11 515-9783-00-00
34 DR Ramp Exit 9 - CN12 2 WHT BRN 10 BLK WHT Playfield Micro 9-SW-8 180-5010-04
35 Spinner Opto 8 - CN12 7 WHT BLU 10 BLK RED Playfield Opto 8-SW-13 520-8541-00
36
37
38 Kitty Sneak-In 8 - CN13 2 PNK RED 10 BLK BRN Playfield Leaf, Target 8-SW-0 500-9935-04
39 Kitty Sneak-In Tgt 8 - CN13 6 PNK BLU 10 BLK BRN Playfield Leaf, Target 8-SW-4 515-9783-00-00
40 XJET Tgt 8 - CN13 7 PNK VIO 10 BLK BRN Playfield Leaf, Target 8-SW-5 515-9785-00-00
41 XJET Lane Opto 8 - CN13 8 PNK GRY 10 BLK BRN Playfield Opto 8-SW-6 515-0215-00 tx
520-8116-00 rx
(511-5815-01 w/
cable)
42
43 Left Loop Ramp Exit 9 - CN12 4 WHT ORG 10 BLK WHT Playfield Micro 9-SW-10 180-5010-04

Continued on next page...

THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01 15

LIGHT, SWITCH, AND DRIVER REFERENCE

SWITCH REFERENCE CONTINUED

ID Name Node Node Conn. Input Input Wire GND Ground Location Type Address Part Number
Ext Pin Pin Wire
44 X Mansion Ramp Exit Opto 8 - CN13 3 PNK ORG 10 BLK BRN Playfield Opto 8-SW-1 515-0215-00 tx
520-8068-00 rx
(511-2739-01 w/
cable)
45 X Mansion Tgt 8 - CN13 4 PNK YEL 10 BLK BRN Playfield Leaf, Target 8-SW-2 515-9784-00-00
46
47 Right Pop Bumper 8 - CN10 4 GRY BLU 10 BLK WHT Playfield Leaf 8-SW-30 180-5232-00
48 Left Pop Bumper 9 - CN12 3 WHT RED 10 BLK WHT Playfield Leaf 9-SW-9 180-5232-00
49
50 Left Ramp Tgt 9 - CN13 2 PNK RED 10 BLK BRN Playfield Leaf, Target 9-SW-0 515-9785-00-00
51 Left Loop Opto 9 - CN13 3 PNK ORG 10 BLK BRN Playfield Opto 9-SW-1 515-0215-00 tx
515-0215-01 rx
52 Right Center Ramp Exit Opto 9 - CN13 4 PNK YEL 10 BLK BRN Playfield Opto 9-SW-2 515-0215-00 tx
515-0215-01 rx
53 Left Ramp Exit Opto 9 - CN13 5 PNK GRN 10 BLK BRN Playfield Opto 9-SW-3 515-0215-00 tx
515-0215-01 rx
54
55 Right Ramp Tgt 9 - CN13 7 PNK VIO 10 BLK BRN Playfield Leaf, Target 9-SW-5 515-9785-00-00
56 Upper Shooter Lane 9 - CN13 8 PNK GRY 10 BLK BRN Playfield Rollover 9-SW-6 500-9935-04
57
58
59 Right Ramp Exit Opto 9 - CN10 2 GRY BLK 7/8/9 BLK BLU Playfield Opto 9-SW-28 515-0215-00 tx
515-0215-01 rx
60 Right Center Ramp Enter 9 - CN10 3 GRY BRN 7/8/9 BLK BLU Playfield Rollover 9-SW-29 500-9935-04
61 Left Center Ramp Exit 9 - CN10 4 GRY RED 7/8/9 BLK BLU Playfield Micro 9-SW-30 180-5010-04
62
63 Left Cent Ramp Entrance 9 - CN10 5 GRY ORG 7/8/9 BLK BLU Playfield Micro 9-SW-31 180-5010-04
64
65
66
67 Sentinel Head 9 - CN11 4 TAN ORG 11/12 BLK GRY Playfield Micro 9-SW-17 180-5010-04
68
69 Sentinel Jaw Open Opto 9 - CN11 6 TAN GRN 11/12 BLK GRY Playfield Opto 9-SW-19 515-0215-00 tx
515-0215-01 rx
70 Sentinel Kick Tgt 9 - CN11 7 TAN BLU 11/12 BLK GRY Playfield Micro 9-SW-20 180-5010-04
71
72
73
74
75
76
77
78 Beasts Lab Tgt 9 - CN9 6 LGN VIO 7/8 BLK BLU Playfield Leaf, Target 9-SW-27 515-9785-00-00
79
80
81
82
83
84
85
86
87
88
Continued on next page...

16 THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01

 LIGHT, SWITCH, AND DRIVER REFERENCE

SWITCH REFERENCE CONTINUED

ID Name Node Node Conn. Input Input Wire GND Ground Location Type Address Part Number
Ext Pin Pin Wire
89
90 Lockdown Button 1 - CN7 8 TAN WHT 5 BLK WHT Cabinet Leaf 1-SW-2 180-5218-00
91
92
93 Start Button 1 - CN6 10 GRY 5 BLK WHT Cabinet Micro 1-SW-11 500-1060-44-LED
94 Tournament Start Button 1 - CN6 9 GRY WHT 5 BLK WHT Cabinet Micro 1-SW-12 500-6587-06-TL
95
96 Left Coin 1 - CN5 9 PNK BRN 3 BLK Cabinet Micro 1-SW-16
97 Right Coin 1 - CN5 7 PNK ORG 3 BLK Cabinet Micro 1-SW-18
98 Center Coin 1 - CN5 8 PNK RED 3 BLK Cabinet Micro 1-SW-17
99 Fourth Coin 1 - CN5 6 - Cabinet - 1-SW-19
100 Fifth Coin 1 - CN5 5 - Cabinet - 1-SW-20
101 Tilt Pendulum 1 - CN6 7 WHT 5 BLK WHT Cabinet Plumb Bob 1-SW-14 516-0007-00
102 Sixth Coin 1 - CN9 5 - Cabinet - 1-SW-21
103 Ticket Notch 1 - CN11 5 - Cabinet - 1-SW-8
104 Slam Tilt 1 - CN5 4 LGN RED 3 BLK Cabinet - 1-SW-22
105
106
107
108
109
110
C1 DIP 1 0 - - - - CPU Node 0-SW-0 -
C2 DIP 2 0 - - - - CPU Node 0-SW-1 -
C3 DIP 3 0 - - - - CPU Node 0-SW-2 -
C4 DIP 4 0 - - - - CPU Node 0-SW-3 -
C5 DIP 5 0 - - - - CPU Node 0-SW-4 -
C6 DIP 6 0 - - - - CPU Node 0-SW-5 -
C7 DIP 7 0 - - - - CPU Node 0-SW-6 -
C8 DIP 8 0 - - - - CPU Node 0-SW-7 -
C9 Service Select 0 - CN25 4 LGN GRY 6 BLK Coin Door 0-SW-8 515-1963-00
C10 Service Plus 0 - CN25 3 LGN VIO 6 BLK Coin Door 0-SW-9 515-1963-00
C11 Service Minus 0 - CN25 2 LGN BLU 6 BLK Coin Door 0-SW-10 515-1963-00
C12 Service Back 0 - CN25 1 LGN BLK 6 BLK Coin Door 0-SW-11 515-1963-00
C17 Headphone Detect 0 - - - - - - Coin Door 0-SW-16 -
C18 Headphone Kit Cable Detect 0 - CN3 5 BLK 4 BLK CPU Node 0-SW-17 -
C19 Volume Encoder 1 0 - CN3 6 WHT 1 DRAIN CPU Node 0-SW-18 -
C20 Volume Encoder 2 0 - CN3 7 GRN 1 DRAIN CPU Node 0-SW-19 -
C24 Coin Door Interlock 0 - CN4 1 GRY 4 GRY RED Backbox 0-SW-23 -

Continued on next page...

THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01 17

LIGHT, SWITCH, AND DRIVER REFERENCE

SWITCH REFERENCE CONTINUED

520-8633-00
9a1

9b1

0
633-0
520-8
9a
520-8636-00
520-8637-00
9b

0
633-0
520-8 8b4
626-0 9b2

520-8
0 520-8634-00
0
3- 0

8b5
63
0-8
52

520-1070-00

520-8

520-8635-00
8b
634-0

SWITCH MAP
TREEHOUSE PRO
8b3
0

520-8626-00

8b6
520-8638-00

8b2
8b1
520-8634-00

520-1070-00

Figure 3.3.1. Playfield switch locations (top view).

18 THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01

 LIGHT, SWITCH, AND DRIVER REFERENCE

3.4 LIGHT REFERENCE

ID Name Node Node Conn. Ret. Ret. Wire Src. Pin Src. Wire Location Type Light Address Part Number
Ext. Pin Color
1 Coin Enable 1 - CN8 6 BLK GRY 2 GRY RED Coin Door Digital Out 1-LP-0
2 Start Button 1 - CN6 3 YEL BRN 1 RED Cabinet Feature White 1-LP-2 113-5071-00
3 Tournament Start 1 - CN6 2 YEL RED 1 RED Cabinet Feature White 1-LP-3 112-5031-01
4 Lockdown Button-R 1 - CN7 2 RED WHT 1 RED Cabinet Feature RGB 1-LP-5 520-5333-00
5 Lockdown Button-G 1 - CN7 3 GRN WHT 1 RED Cabinet Feature RGB 1-LP-4 520-5333-00
6 Lockdown Button-B 1 - CN7 4 BLU WHT 1 RED Cabinet Feature RGB 1-LP-7 520-5333-00
7
8
9
10
11 DR Target Top 8 b CN4 6 BLU RED 1 RED Playfield Feature White 8-LP-45 520-8638-00
12 DR Target Mid 8 b CN4 7 BLU YEL 1 RED Playfield Feature White 8-LP-46 520-8638-00
13 DR Target Bot 8 b CN4 8 BLU GRN 1 RED Playfield Feature White 8-LP-47 520-8638-00
14 DR Ramp Target 8 b CN4 5 ORG GRN 1 RED Playfield Feature White 8-LP-44 520-8638-00
15 DR Flip Target 8 b CN3 9 GRN VIO 1/2/3/4 RED Playfield Feature White 8-LP-37 520-5307-00
16 Drain Target 8 b CN3 10 GRN GRY 1/2/3/4 RED Playfield Feature White 8-LP-38 520-5307-00
17 Left Return Top 8 b CN3 6 GRN RED 1/2/3/4 RED Playfield Feature White 8-LP-34 520-8634-00
18 Left Return Mid 8 b CN3 7 GRN YEL 1/2/3/4 RED Playfield Feature White 8-LP-35 520-8634-00
19 Left Return Bot 8 b CN3 8 GRN BLU 1/2/3/4 RED Playfield Feature White 8-LP-36 520-8634-00
20 Shoot Again 8 b CN3 11 GRN 1/2/3/4 RED Playfield Feature White 8-LP-39 520-5307-00
21 DR Ramp BB-Cerebro 8 b CN3 12 GRN WHT 1/2/3/4 RED Playfield Feature White 8-LP-40 520-5307-00
22
23
24 XJET Arrow-R 8 b CN8 2 RED BRN 1 RED Playfield Feature RGB 8-LP-21 520-8633-00
25 XJET Arrow-G 8 b CN8 3 GRN BRN 1 RED Playfield Feature RGB 8-LP-22 520-8633-00
26 XJET Arrow-B 8 b CN8 4 BLU BRN 1 RED Playfield Feature RGB 8-LP-23 520-8633-00
27 XJET Sentinel-R 8 b CN8 5 RED ORG 1 RED Playfield Feature RGB 8-LP-24 520-8633-00
28 XJET Sentinel-G 8 b CN8 6 GRN ORG 1 RED Playfield Feature RGB 8-LP-25 520-8633-00
29 XJET Sentinel-B 8 b CN8 7 BLU ORG 1 RED Playfield Feature RGB 8-LP-26 520-8633-00
30 XJET Combo 8 b CN8 8 RED YEL 1 RED Playfield Feature White 8-LP-27 520-8633-00
31
32 Kitty Sneak-In Target 8 b CN8 11 RED VIO 1 RED Playfield Feature White 8-LP-30 520-8626-00
33 STC 8 b CN8 12 RED GRY 1 RED Playfield Feature White 8-LP-31 520-8626-00
34 XJET Target 8 b CN8 10 RED BLU 1 RED Playfield Feature White 8-LP-29 520-5307-00
35
36
37
38 Wizard Mode 1 8 b LED9 - - - - Playfield Feature White 8-LP-16 520-8635-00
39 Wizard Mode 2 8 b LED10 - - - - Playfield Feature White 8-LP-17 520-8635-00
40 Mode 1 8 b LED8 - - - - Playfield Feature White 8-LP-15 520-8635-00
41 Mode 2 8 b LED7 - - - - Playfield Feature White 8-LP-14 520-8635-00
42 Mode 3 8 b LED6 - - - - Playfield Feature White 8-LP-13 520-8635-00
43 Mode 4 8 b LED4 - - - - Playfield Feature White 8-LP-11 520-8635-00
44 Mode 5 8 b LED5 - - - - Playfield Feature White 8-LP-12 520-8635-00
45 Mode 6 8 b LED3 - - - - Playfield Feature White 8-LP-10 520-8635-00
46 Mode 7 8 b LED2 - - - - Playfield Feature White 8-LP-9 520-8635-00
47 Mode 8 8 b LED1 - - - - Playfield Feature White 8-LP-8 520-8635-00
48 Future-R 8 b LED11 - - - - Playfield Feature RGB 8-LP-18 520-8635-00
49 Future-G 8 b LED11 - - - - Playfield Feature RGB 8-LP-19 520-8635-00
50 Future-B 8 b LED11 - - - - Playfield Feature RGB 8-LP-20 520-8635-00
51

Continued on next page...

THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01 19

LIGHT, SWITCH, AND DRIVER REFERENCE

LIGHT REFERENCE CONTINUED

ID Name Node Node Conn. Ret. Ret. Wire Src. Pin Src. Wire Location Type Light Address Part Number
Ext. Pin Color
52
53
54 X-Mansion 8 b CN5 4 BRN RED 1/2/3 RED Playfield Feature White 8-LP-48 520-5307-00
55
56 Right Pop Top 8 b CN5 6 BRN GRN 1/2/3 RED Playfield Feature White 8-LP-50 520-8634-00
57 Right Pop Mid 8 b CN5 7 BRN VIO 1/2/3 RED Playfield Feature White 8-LP-51 520-8634-00
58 Right Pop Bot 8 b CN5 8 BRN GRY 1/2/3 RED Playfield Feature White 8-LP-52 520-8634-00
59 Right Return 8 b CN5 10 BRN YEL 1/2/3 RED Playfield Feature White 8-LP-54 520-8626-00
60 Right Outlane 8 b CN5 11 BRN BLU 1/2/3 RED Playfield Feature White 8-LP-55 520-5307-00
61 Extra Ball 8 b CN5 5 BRN ORG 1/2/3 RED Playfield Feature White 8-LP-49 520-8626-00
62
63 Left Loop Arrow-R 9 a CN4 2 RED VIO 1 RED Playfield Feature RGB 9-LP-26 520-8633-00
64 Left Loop Arrow-G 9 a CN4 3 GRN VIO 1 RED Playfield Feature RGB 9-LP-27 520-8633-00
65 Left Loop Arrow-B 9 a CN4 4 BLU VIO 1 RED Playfield Feature RGB 9-LP-28 520-8633-00
66 Left Loop Sentinel-R 9 a CN4 5 RED GRY 1 RED Playfield Feature RGB 9-LP-29 520-8633-00
67 Left Loop Sentinel-G 9 a CN4 6 GRN GRY 1 RED Playfield Feature RGB 9-LP-30 520-8633-00
68 Left Loop Sentinel-B 9 a CN4 7 BLU GRY 1 RED Playfield Feature RGB 9-LP-31 520-8633-00
69 Left Loop Combo 9 a CN4 8 ORG BLU 1 RED Playfield Feature White 9-LP-32 520-8633-00
70
71
72 Left Ramp Target 9 a CN3 2 ORG BRN 1 RED Playfield Feature White 9-LP-33 520-5307-00
73 Left Ramp Arrow-R 9 a LED4 - - - - Playfield Feature RGB 9-LP-11 520-8637-00
74 Left Ramp Arrow-G 9 a LED4 - - - - Playfield Feature RGB 9-LP-12 520-8637-00
75 Left Ramp Arrow-B 9 a LED4 - - - - Playfield Feature RGB 9-LP-13 520-8637-00
76 Left Ramp Sentinel-R 9 a LED5 - - - - Playfield Feature RGB 9-LP-14 520-8637-00
77 Left Ramp Sentinel-G 9 a LED5 - - - - Playfield Feature RGB 9-LP-15 520-8637-00
78 Left Ramp Sentinel-B 9 a LED5 - - - - Playfield Feature RGB 9-LP-16 520-8637-00
79 Left Ramp Combo 9 a LED1 - - - - Playfield Feature White 9-LP-8 520-8637-00
80 Left Ramp Cerebro 9 a LED2 - - - - Playfield Feature White 9-LP-9 520-8637-00
81
82
83 Beasts Lab-R 9 a LED6 - - - - Playfield Feature RGB 9-LP-17 520-8637-00
84 Beasts Lab-G 9 a LED6 - - - - Playfield Feature RGB 9-LP-18 520-8637-00
85 Beasts Lab-B 9 a LED6 - - - - Playfield Feature RGB 9-LP-19 520-8637-00
86
87
88 Lt Center Ramp Arrow-R 9 a LED8 - - - - Playfield Feature RGB 9-LP-23 520-8637-00
89 Lt Center Ramp Arrow-G 9 a LED8 - - - - Playfield Feature RGB 9-LP-24 520-8637-00
90 Lt Center Ramp Arrow-B 9 a LED8 - - - - Playfield Feature RGB 9-LP-25 520-8637-00
91 Lt Center Ramp Sentinel-R 9 a LED7 - - - - Playfield Feature RGB 9-LP-20 520-8637-00
92 Lt Center Ramp Sentinel-G 9 a LED7 - - - - Playfield Feature RGB 9-LP-21 520-8637-00
93 Lt Center Ramp Sentinel-B 9 a LED7 - - - - Playfield Feature RGB 9-LP-22 520-8637-00
94 Lt Center Combo 9 a LED3 - - - - Playfield Feature White 9-LP-10 520-8637-00
95
96
97
98
99 Sentinel Mid 9 b LED2 - - - - Playfield Feature White 9-LP-41 520-8636-00
100
101
102

Continued on next page...

20 THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01

 LIGHT, SWITCH, AND DRIVER REFERENCE

LIGHT REFERENCE CONTINUED

ID Name Node Node Conn. Ret. Ret. Wire Src. Pin Src. Wire Location Type Light Address Part Number
Ext. Pin Color
103
104 Magnet 1 9 b LED4 - - - - Playfield Feature White 9-LP-43 520-8636-00
105 Magnet 2 9 b LED5 - - - - Playfield Feature White 9-LP-44 520-8636-00
106 Magnet 3 9 b LED6 - - - - Playfield Feature White 9-LP-45 520-8636-00
107 Magnet 4 9 b CN4 4 BRN BLK 1/2/3 RED Playfield Feature White 9-LP-47 520-8634-00
108 Magnet 5 9 b CN4 5 BRN RED 1/2/3 RED Playfield Feature White 9-LP-48 520-8634-00
109 Magnet 6 9 b CN4 6 BRN ORG 1/2/3 RED Playfield Feature White 9-LP-49 520-8634-00
110
111
112
113 Rt Center Ramp Arrow-R 9 b CN3 5 RED BRN 1/2/3/4 RED Playfield Feature RGB 9-LP-56 520-8633-00
114 Rt Center Ramp Arrow-G 9 b CN3 6 GRN BRN 1/2/3/4 RED Playfield Feature RGB 9-LP-57 520-8633-00
115 Rt Center Ramp Arrow-B 9 b CN3 7 BLU BRN 1/2/3/4 RED Playfield Feature RGB 9-LP-58 520-8633-00
116 Rt Center Ramp Sentinel-R 9 b CN3 8 RED ORG 1/2/3/4 RED Playfield Feature RGB 9-LP-59 520-8633-00
117 Rt Center Ramp Sentinel-G 9 b CN3 9 GRN ORG 1/2/3/4 RED Playfield Feature RGB 9-LP-60 520-8633-00
118 Rt Center Ramp Sentinel-B 9 b CN3 10 BLU ORG 1/2/3/4 RED Playfield Feature RGB 9-LP-61 520-8633-00
119 Rt Center Combo 9 b CN3 11 ORG VIO 1/2/3/4 RED Playfield Feature White 9-LP-62 520-8633-00
120
121 Right Ramp Target 9 b LED7 - - - - Playfield Feature White 9-LP-46 520-8636-00
122
123 Right Ramp BB-Cerebro 9 b CN4 10 BRN VIO 1/2/3 RED Playfield Feature White 9-LP-53 520-5307-00
124 Right Ramp Arrow-R 8 b CN6 3 RED WHT 1/2 RED Playfield Feature RGB 8-LP-56 520-8633-00
125 Right Ramp Arrow-G 8 b CN6 4 GRN WHT 1/2 RED Playfield Feature RGB 8-LP-57 520-8633-00
126 Right Ramp Arrow-B 8 b CN6 5 BLU WHT 1/2 RED Playfield Feature RGB 8-LP-58 520-8633-00
127 Right Ramp Sentinel-R 8 b CN6 6 RED BLK 1/2 RED Playfield Feature RGB 8-LP-59 520-8633-00
128 Right Ramp Sentinel-G 8 b CN6 7 GRN BLK 1/2 RED Playfield Feature RGB 8-LP-60 520-8633-00
129 Right Ramp Sentinel-B 8 b CN6 8 BLU BLK 1/2 RED Playfield Feature RGB 8-LP-61 520-8633-00
130 Right Ramp Combo 8 b CN6 9 ORG GRY 1/2 RED Playfield Feature White 8-LP-62 520-8633-00
131
132
133
134
135
136
137 Backpanel Colosus 9 - CN14 6 ORG BLU 7/8 YEL Playfield Feature White 9-LP-3 520-5307-00
138 Backpanel Beasts Lab 9 - CN14 4 ORG YEL 7/8 YEL Playfield Feature White 9-LP-5 520-5307-00
139 Backpanel Explosion 9 - CN14 3 ORG RED 7/8 YEL Playfield Feature White 9-LP-6 520-5307-00
140 Backpanel Cyclops 9 - CN14 2 ORG BRN 7/8 YEL Playfield Feature White 9-LP-7 520-5307-00
141 Left Ramp Backpanel 9 - CN14 5 ORG GRN 7/8 YEL Playfield Feature White 9-LP-4 520-5307-00
142 Right Ramp Backpanel 9 a CN3 8 ORG WHT 1 RED Playfield Feature White 9-LP-39 520-5307-00
143
144 DR Flood-R (x2) 8 - CN14 6 RED BRN 7/8 YEL Playfield Feature RGB 8-LP-3 520-5333-00
145 DR Flood-G (x2) 8 - CN14 5 GRN BRN 7/8 YEL Playfield Feature RGB 8-LP-4 520-5333-00
146 DR Flood-B (x2) 8 - CN14 4 BLU BRN 7/8 YEL Playfield Feature RGB 8-LP-5 520-5333-00
147
148
149
150 Coin Door GI 1 - CN5 2 YEL 1 YEL-WHT Coin Door G.I. White 1-LP-1 112-5033-08
151 Bottom GI-WHT (x15) 8 - CN15 5 WHT BLK 1 YEL BLK Playfield G.I. White 8-LP-0 112-5034-08F
520-7000-00
(Bot Arch)
152 Bottom GI-RED (x6) 8 - CN15 6 RED BLK 2 YEL RED Playfield G.I. Red 8-LP-1 112-5034-02F
Continued on next page...

THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01 21

LIGHT, SWITCH, AND DRIVER REFERENCE

LIGHT REFERENCE CONTINUED

ID Name Node Node Conn. Ret. Ret. Wire Src. Pin Src. Wire Location Type Light Address Part Number
Ext. Pin Color
153 Bottom GI-BLU (x8) 8 - CN15 7 BLU BLK 3 YEL BLU Playfield G.I. Blue 8-LP-2 112-5034-05F
154
155 Top GI-WHT (x12) 9 - CN15 5 WHT BLK 1 YEL BLK Playfield/ G.I. White 9-LP-0 112-5034-08F
Back Pnl 520-5307-00
156 Top GI-RED (X10) 9 - CN15 6 RED BLK 2 YEL RED Playfield/ G.I. Red 9-LP-1 112-5034-02F
Back Pnl
157 Top GI-BLU (x12) 9 - CN15 7 BLU BLK 3 YEL BLU Playfield/ G.I. Blue 9-LP-2 112-5034-05F
Back Pnl
158
159
160
161 DR Spinner Flash 8 b CN4 3 ORG YEL 1 RED Playfield Flash White 8-LP-42 520-8638-00
162 Danger Room Flash 8 b CN4 4 ORG GRN 1 RED Playfield Flash White 8-LP-43 520-8638-00
163
164 Left Pop Flash 8 b CN3 5 ORG BRN 1/2/3/4 RED Playfield Flash White 8-LP-33 520-8059-00
165 Right Pop Flash 8 b CN5 9 BRN WHT 1/2/3 RED Playfield Flash White 8-LP-53 520-8059-00
166
167 Sentinel Finger Flash 8 b CN8 13 ORG VIO 1 RED Playfield Flash White 8-LP-32 520-8457-00
168 Sentinel Hand Flash 8 b CN6 10 ORG WHT 1/2 RED Playfield Flash White 8-LP-63 520-8457-00
169
170 Wolverine Flash 9 b CN4 9 BRN BLU 1/2/3 RED Playfield Flash White 9-LP-52 520-7000-00
171
172
173 Beasts Lab Flash 9 a CN3 3 ORG RED 1 RED Playfield Flash White 9-LP-34 520-7000-00
174
175 Sentinel Eye Left 9 b CN4 7 BRN YEL 1/2/3 RED Playfield Flash Red 9-LP-50 520-8457-00
176 Sentinel Eye Right 9 b CN4 8 BRN GRN 1/2/3 RED Playfield Flash Red 9-LP-51 520-8457-00
177
178 Right Sling Flash 8 - CN14 3 BRN ORG 7/8 YEL Playfield Flash White 8-LP-6 520-7000-00
179 Right Sentinel Spot 8 - CN14 2 BRN RED 7/8 YEL Playfield Flash White 8-LP-7 520-7000-00
180 Left Sentinel Spot 9 b CN4 11 BRN WHT 1/2/3 RED Playfield Flash White 9-LP-54 520-7000-00
181
182 Sentinel Left Flash 9 b LED1 - - - - Playfield Flash White 9-LP-40 520-8636-00
183 Sentinel Right Flash 9 b LED3 - - - - Playfield Flash White 9-LP-42 520-8636-00
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201

Continued on next page...

22 THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01

 LIGHT, SWITCH, AND DRIVER REFERENCE

LIGHT REFERENCE CONTINUED

ID Name Node Node Conn. Ret. Ret. Wire Src. Pin Src. Wire Location Type Light Address Part Number
Ext. Pin Color
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220 Speaker 1-R 7 - CN1 - - - - Cabinet Feature RGB 7-LP-1 511-1135-00
221 Speaker 1-G 7 - CN1 - - - - Cabinet Feature RGB 7-LP-0 511-1135-00
222 Speaker 1-B 7 - CN1 - - - - Cabinet Feature RGB 7-LP-2 511-1135-00
223 Speaker 2-R 7 - CN1 - - - - Cabinet Feature RGB 7-LP-4 511-1135-00
224 Speaker 2-G 7 - CN1 - - - - Cabinet Feature RGB 7-LP-3 511-1135-00
225 Speaker 2-B 7 - CN1 - - - - Cabinet Feature RGB 7-LP-5 511-1135-00
226 Speaker 3-R 7 - CN1 - - - - Cabinet Feature RGB 7-LP-7 511-1135-00
227 Speaker 3-G 7 - CN1 - - - - Cabinet Feature RGB 7-LP-6 511-1135-00
228 Speaker 3-B 7 - CN1 - - - - Cabinet Feature RGB 7-LP-8 511-1135-00
229 Speaker 4-R 7 - CN1 - - - - Cabinet Feature RGB 7-LP-10 511-1135-00
230 Speaker 4-G 7 - CN1 - - - - Cabinet Feature RGB 7-LP-9 511-1135-00
231 Speaker 4-B 7 - CN1 - - - - Cabinet Feature RGB 7-LP-11 511-1135-00
232 Speaker 5-R 7 - CN1 - - - - Cabinet Feature RGB 7-LP-13 511-1135-00
233 Speaker 5-G 7 - CN1 - - - - Cabinet Feature RGB 7-LP-12 511-1135-00
234 Speaker 5-B 7 - CN1 - - - - Cabinet Feature RGB 7-LP-14 511-1135-00
235 Speaker 6-R 7 - CN1 - - - - Cabinet Feature RGB 7-LP-16 511-1135-00
236 Speaker 6-G 7 - CN1 - - - - Cabinet Feature RGB 7-LP-15 511-1135-00
237 Speaker 6-B 7 - CN1 - - - - Cabinet Feature RGB 7-LP-17 511-1135-00
238 Speaker 7-R 7 - CN1 - - - - Cabinet Feature RGB 7-LP-19 511-1135-00
239 Speaker 7-G 7 - CN1 - - - - Cabinet Feature RGB 7-LP-18 511-1135-00
240 Speaker 7-B 7 - CN1 - - - - Cabinet Feature RGB 7-LP-20 511-1135-00
241 Speaker 8-R 7 - CN1 - - - - Cabinet Feature RGB 7-LP-22 511-1135-00
242 Speaker 8-G 7 - CN1 - - - - Cabinet Feature RGB 7-LP-21 511-1135-00
243 Speaker 8-B 7 - CN1 - - - - Cabinet Feature RGB 7-LP-23 511-1135-00
244 Speaker 9-R 7 - CN1 - - - - Cabinet Feature RGB 7-LP-25 511-1135-00
245 Speaker 9-G 7 - CN1 - - - - Cabinet Feature RGB 7-LP-24 511-1135-00
246 Speaker 9-B 7 - CN1 - - - - Cabinet Feature RGB 7-LP-26 511-1135-00
247 Speaker 10-R 7 - CN1 - - - - Cabinet Feature RGB 7-LP-28 511-1135-00
248 Speaker 10-G 7 - CN1 - - - - Cabinet Feature RGB 7-LP-27 511-1135-00
249 Speaker 10-B 7 - CN1 - - - - Cabinet Feature RGB 7-LP-29 511-1135-00
250 Speaker 11-R 7 - CN1 - - - - Cabinet Feature RGB 7-LP-31 511-1135-00
251 Speaker 11-G 7 - CN1 - - - - Cabinet Feature RGB 7-LP-30 511-1135-00
252 Speaker 11-B 7 - CN1 - - - - Cabinet Feature RGB 7-LP-32 511-1135-00

Continued on next page...

THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01 23

LIGHT, SWITCH, AND DRIVER REFERENCE

LIGHT REFERENCE CONTINUED

ID Name Node Node Conn. Ret. Ret. Wire Src. Pin Src. Wire Location Type Light Address Part Number
Ext. Pin Color
253 Speaker 12-R 7 - CN1 - - - - Cabinet Feature RGB 7-LP-34 511-1135-00
254 Speaker 12-G 7 - CN1 - - - - Cabinet Feature RGB 7-LP-33 511-1135-00
255 Speaker 12-B 7 - CN1 - - - - Cabinet Feature RGB 7-LP-35 511-1135-00
256 Speaker 13-R 7 - CN1 - - - - Cabinet Feature RGB 7-LP-37 511-1135-00
257 Speaker 13-G 7 - CN1 - - - - Cabinet Feature RGB 7-LP-36 511-1135-00
258 Speaker 13-B 7 - CN1 - - - - Cabinet Feature RGB 7-LP-38 511-1135-00
259 Speaker 14-R 7 - CN1 - - - - Cabinet Feature RGB 7-LP-40 511-1135-00
260 Speaker 14-G 7 - CN1 - - - - Cabinet Feature RGB 7-LP-39 511-1135-00
261 Speaker 14-B 7 - CN1 - - - - Cabinet Feature RGB 7-LP-41 511-1135-00
262 Speaker 15-R 7 - CN1 - - - - Cabinet Feature RGB 7-LP-43 511-1135-00
263 Speaker 15-G 7 - CN1 - - - - Cabinet Feature RGB 7-LP-42 511-1135-00
264 Speaker 15-B 7 - CN1 - - - - Cabinet Feature RGB 7-LP-44 511-1135-00
265 Speaker 16-R 7 - CN1 - - - - Cabinet Feature RGB 7-LP-46 511-1135-00
266 Speaker 16-G 7 - CN1 - - - - Cabinet Feature RGB 7-LP-45 511-1135-00
267 Speaker 16-B 7 - CN1 - - - - Cabinet Feature RGB 7-LP-47 511-1135-00
268 Speaker 17-R 7 - CN1 - - - - Cabinet Feature RGB 7-LP-49 511-1135-00
269 Speaker 17-G 7 - CN1 - - - - Cabinet Feature RGB 7-LP-48 511-1135-00
270 Speaker 17-B 7 - CN1 - - - - Cabinet Feature RGB 7-LP-50 511-1135-00
271 Speaker 18-R 7 - CN1 - - - - Cabinet Feature RGB 7-LP-52 511-1135-00
272 Speaker 18-G 7 - CN1 - - - - Cabinet Feature RGB 7-LP-51 511-1135-00
273 Speaker 18-B 7 - CN1 - - - - Cabinet Feature RGB 7-LP-53 511-1135-00
274 Speaker 19-R 7 - CN1 - - - - Cabinet Feature RGB 7-LP-55 511-1135-00
275 Speaker 19-G 7 - CN1 - - - - Cabinet Feature RGB 7-LP-54 511-1135-00
276 Speaker 19-B 7 - CN1 - - - - Cabinet Feature RGB 7-LP-56 511-1135-00
277 Speaker 20-R 7 - CN1 - - - - Cabinet Feature RGB 7-LP-58 511-1135-00
278 Speaker 20-G 7 - CN1 - - - - Cabinet Feature RGB 7-LP-57 511-1135-00
279 Speaker 20-B 7 - CN1 - - - - Cabinet Feature RGB 7-LP-59 511-1135-00
280 Speaker 21-R 7 - CN1 - - - - Cabinet Feature RGB 7-LP-61 511-1135-00
281 Speaker 21-G 7 - CN1 - - - - Cabinet Feature RGB 7-LP-60 511-1135-00
282 Speaker 21-B 7 - CN1 - - - - Cabinet Feature RGB 7-LP-62 511-1135-00
283 Speaker 22-R 7 - CN1 - - - - Cabinet Feature RGB 7-LP-64 511-1135-00
284 Speaker 22-G 7 - CN1 - - - - Cabinet Feature RGB 7-LP-63 511-1135-00
285 Speaker 22-B 7 - CN1 - - - - Cabinet Feature RGB 7-LP-65 511-1135-00
286 Speaker 23-R 7 - CN1 - - - - Cabinet Feature RGB 7-LP-67 511-1135-00
287 Speaker 23-G 7 - CN1 - - - - Cabinet Feature RGB 7-LP-66 511-1135-00
288 Speaker 23-B 7 - CN1 - - - - Cabinet Feature RGB 7-LP-68 511-1135-00
289

Continued on next page...

24 THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01

 LIGHT, SWITCH, AND DRIVER REFERENCE

LIGHT REFERENCE CONTINUED

Figure 3.4.1. Playfield light locations (top view).

THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01 25

ELECTRONIC PINOUTS AND SCHEMATICS

4. ELECTRONIC PINOUTS AND SCHEMATICS

4.1 SPIKE-2 CPU NODE 0
509-1003-01
DIRECT SWITCH MAPPING (CN25)
The coin-door diagnostic switches are connected directly to the CPU node via the Cabinet Node. Note that both the CPU and
Cabinet nodes are required for diagnostic switch operation.

ID Name Conn. Input Input Wire GND Ground Wire Location Type Address Part Number
Pin Pin
C1 DIP 1 - - - - - CPU Node 0-SW-0 -
C2 DIP 2 - - - - - CPU Node 0-SW-1 -
C3 DIP 3 - - - - - CPU Node 0-SW-2 -
C4 DIP 4 - - - - - CPU Node 0-SW-3 -
C5 DIP 5 - - - - - CPU Node 0-SW-4 -
C6 DIP 6 - - - - - CPU Node 0-SW-5 -
C7 DIP 7 - - - - - CPU Node 0-SW-6 -
C8 DIP 8 - - - - - CPU Node 0-SW-7 -
C9 Service Select CN25 1 LGN-GRY 11 BLK-WHT Coin Door 0-SW-9 180-5192-04
C10 Service Plus CN25 2 LGN-VIO 11 BLK-WHT Coin Door 0-SW-10 180-5192-02
C11 Service Minus CN25 3 LGN-BLU 11 BLK-WHT Coin Door 0-SW-11 180-5192-02
C12 Service Back CN25 4 LGN-BLK 11 BLK-WHT Coin Door 0-SW-12 180-5192-00

CONNECTORS COMPONENTS
ID Connector Type Description ID Name
CN1 5-Pin .156” Header Backbox 2-channel amplified speaker out S1 DIP Switches
CN2 3-Pin .100” Header Console Port S2 Reset Switch
SD CARD (CN13) For system SD card. Note: only to be removed if instructed to by
CN3 7-Pin .100” Header Headphone connector
Stern Service.
CN4 2-Pin .156” Cabinet 1-channel amplified speaker out BT1 BR1225 3V Lithium battery for game clock between power cycles
CN5 7-Pin .100” Header Line In/Out
CN6 34 Pin 2.00mm Header LCD display connector STATUS LEDS
CN7 5-Pin .156” Header 48V supply from main power supply
CN8 6-Pin .100” Header SPI Serial LED ID Name Color Description
48V +48V Supply In Red ON: Main system power is connected.
CN9 USB USB connector - for software updates,
OFF: No 48V system power. Check power supply
audit dumps, and expansion modules connections, cables, and fuses.
CN9 USB USB connector - for software updates, 3.3V +3.3V Logic Red ON: Logic power supply is good.
audit dumps, and expansion modules OFF: Logic power supply bad, call tech support.
CN10 HDMI HDMI Out 5V +5V Logic Red ON: Logic power supply is good.
CN11 RJ45 SPIKE node bus - to cabinet node N1 OFF: Logic power supply bad, call tech support.
12V +12V Backbox Red ON: Back box LED power good.
CN12 RJ45 SPIKE node bus - To Topper accessory Kit Illumination OFF: Backbox LED power bad, call tech support.
CN13 SD CARD SD Card connector VA +30V Audio Red ON: Audio power supply is good.
CN14 5-Pin .100” Header LCD Backlight OFF: Audio power supply off, call tech support.
CN15 3-Pin .100” Header Backbox Light VNB +9V Node Bus Red Power for the Node bus.
ON: Power for node bus good.
CN16 4-Pin .100” Header 3.3v / 5v / 12v
OFF: Power to node bus not detected, call tech
CN17 ETHERNET ETHERNET connector support.
CN21 SATA Header SATA connector 5V (CPU) +5V Logic Red ON: Logic power supply is good.
CN22 RJ45 SPIKE node bus - to playfield node OFF: Logic power supply bad, call tech support.
SDIO ACT Not Used Red Should remain unlit as it is not currently used.
CN25 12-Pin .100” Header Dedicated switch inputs - service, volume
switches STATUS CPU Heartbeat, Red Double blink ~1/2 second: Good, Processor
System Status running.
OFF: Processor not running, call tech support.
μSD ACT Activity indicator Red Should blink rapidly when reading or writing to
for micro SD Card micro SD card.
D23 Netbridge Status Red Should blink once every ~1/2 second.

26 THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01

 ELECTRONIC PINOUTS AND SCHEMATICS

SPIKE-2 CPU NODE 0 CONTINUED

AUDIO PINOUTS
ID Type Pin Description Minimum Max Wire
Impedance Power Color
(RMS)
CN1 .156" 5-pin 1 Speaker Right Ground (-) 4 Ohms - BLK-WHT
Header 2 Speaker Right (+) 4 Ohms 20W RED-WHT
3 n/c - -
4 Speaker Left Ground (-) 4 Ohms - BLK-RED
5 Speaker Left (+) 4 Ohms 20W RED-BLK
CN3 .100" 7-pin 1 n/c - -
Header 2 L-HP 16 Ohms 15 mW
3 R-HP 16 Ohms 15 mW
4 n/c - -
5 Headphone Detect - -
6 Headphone vol + - -
7 Headphone vol - - - Figure 4.1.1. SPIKE 2 CPU Node connector detail.
CN4 .156" 2-pin 1 Woofer Ground (-) 8 Ohms - YEL-BLK
Header 2 Woofer Out (+) 8 Ohms 40W YEL-WHT
CN5 .100" 7-pin 1 n/c - -
Header 2 L-IN 30K Ohms 0.6VRMS COIN DOOR SERVICE SWITCH WIRING
3 R-IN 30K Ohms 0.6VRMS
4 n/c - -
5 L-OUT 10K Ohms 1.5V
6 R-OUT 10K Ohms 1.5V
7 Woofer Line Out 10K Ohms 1.5V

COUNTRY CODES (DIP S2)

DIP S2
Country 1 2 3 4 5 6 7 8
USA OFF OFF OFF OFF OFF OFF OFF OFF
Austria ON OFF OFF OFF OFF OFF OFF OFF
Australia ON OFF ON ON OFF OFF OFF OFF
Belgium OFF ON OFF OFF OFF OFF OFF OFF
Canada 1 ON ON OFF OFF OFF OFF OFF OFF Figure 4.1.2. Service switch wiring. Note that the Cabinet Node
Canada 2 OFF ON OFF ON ON OFF OFF OFF must be present and CN10 and CN12 connected for the Coin
China OFF OFF ON ON ON OFF OFF OFF Door Service Switches to function correctly.
Croatia OFF ON ON OFF ON OFF OFF OFF
Denmark ON OFF OFF ON OFF OFF OFF OFF
Finland ON OFF ON OFF OFF OFF OFF OFF
France OFF ON ON OFF OFF OFF OFF OFF
Germany ON ON ON OFF OFF OFF OFF OFF
Greece ON ON ON ON OFF OFF OFF OFF
Italy OFF OFF OFF ON OFF OFF OFF OFF
Japan ON OFF ON OFF ON OFF OFF OFF
Middle East ON ON ON OFF ON OFF OFF OFF
Netherlands OFF OFF ON OFF OFF OFF OFF OFF
New Zealand OFF OFF OFF OFF ON OFF OFF OFF
Norway OFF ON OFF ON OFF OFF OFF OFF
Portugal ON OFF OFF OFF OFF ON OFF OFF
Russia ON OFF OFF ON ON OFF OFF OFF
S. Africa OFF OFF ON OFF ON OFF OFF OFF
Spain OFF ON OFF OFF ON OFF OFF OFF
Sweden ON ON OFF ON OFF OFF OFF OFF
Switzerland OFF OFF ON ON OFF OFF OFF OFF
Taiwan OFF OFF OFF ON ON OFF OFF OFF
United Kingdom OFF ON ON ON OFF OFF OFF OFF

THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01 27

ELECTRONIC PINOUTS AND SCHEMATICS

4.2 CABINET NODE 1

520-6967-72
ID Type Pin Description Wire Color
CN1 .100" 8-Pin Header Universal 1 12V -
Card Link 2 Coin 1 -
3 Meter 1 -
4 N/C -
5 Notch -
6 Coin Enable -
7 Ticket Enable -
8 Ground -
CN2 .100" 5-Pin Header Low Ticket 1 Ground -
2 Ticket Low sw. -
3 Key -
4 Ticket Low -
5 5V Out -
CN3 .100" 3-Pin Header 1 Meter 12V (+) RED
2 Meter (-) BLK
Meter 1
3 N/C -
CN4 .100" 3-Pin Header 1 Meter 12V (+) RED CN9 .100" 6-Pin Header 1 Coin Enable/DBA Inhibit (-) BLK
2 Meter (-) BLK 2 Coin Enable/DBA Inhibit (+) -
Meter 2 Dollar Bill Acceptor
3 N/C - 3 Key Key
CN5 .100" 9-Pin Header 1 5V Out YEL/WHT 4 DBA 12V ORG
2 Coin LED Out YEL 5 Coin 6 / DBA Credit -
3 Ground BLK 6 Ground BLK-ORG
4 Slam Tilt In LGN/RED CN10 .100" 6-Pin Header 1 Service Back (To Coindoor) LGN-BLK
5 Coin 5 PNK/GRN* 2 Service Down (To Coindoor) LGN-BLU
Service Switch In
6 Coin 4 PNK/YEL* 3 Service Up (To Coindoor) LGN-VIO
7 Coin 3 PNK/ORN* 4 Service Select (To Coindoor) LGN-GRY
8 Coin 2 PNK/RED* 5 Key Key
9 Coin 1 PNK/BRN* 6 Service Ground (To Coindoor) BLK
CN6 .100" 14-Pin Header 1 5V LED Power RED CN11 .100" 5-Pin Header 1 12V RED
2 Start 2 LED YEL-RED 2 N/C -
Cabinet Left Ticket Dispenser
3 Start 1 LED YEL-BRN 3 Ticket Dispenser Enable WHT
4 Spare LED - 4 Ground BLK
5 Ground BLK-WHT 5 Ticket Dispenser Notch BLU
6 Spare Left - CN12 .100" 10-Pin Header 1 Service Back (To CPU) LGN-BLK
7 Tilt Input WHT 2 Service Down (To CPU) LGN-BLU
CPU Direct Switches
8 Door Open - 3 Service Up (To CPU) LGN-VIO
9 Start 2 Switch GRY-WHT 4 Service Select (To CPU) LGN-GRY
10 Start 1 Switch GRY 5 Power Present LGN-ORG
11 N/C - 6 Service Ground (To CPU) BLK-WHT
12 N/C - 7 N/C -
13 N/C - 8 N/C -
14 N/C - 9 N/C -
CN7 .100" 12-Pin Header 1 5V LED Power RED 10 N/C -
2 Plunge 2 LED RED-WHT CN14 .156" 5-Pin Header Power 1 Ground BLK
Cabinet Right
3 Plunge 1 LED GRN-WHT Input 2 Key Key
4 Spare LED 2 BLU-WHT 3 N/C -
5 Ground BLK-WHT 4 N/C -
6 Spare Right In - 5 48VDC In GRY-YEL
7 Plunge 2 Switch - CN15 .100" 6-Pin Header Spare 1 5V LED Power -
8 Plunge 1 Switch - LED's 2 Key Key
9 N/C - 3 Spare LED 3 -
10 N/C - 4 Spare LED 4 -
11 N/C - 5 Spare LED 5 -
12 N/C - 6 Spare LED 6 -
CN8 .100" 10-Pin Header Dual Row 1 Ground - CN16 .156" 5-Pin Header 1 Shaker Motor (-) BLU
2 12V - 2 Shaker Motor (-) -
Electronic Coin Mech Shaker Motor
3 Coin 5 - 3 Shaker Motor (+) -
4 Coin 6 - 4 Key Key
5 N/C - 5 Shaker Motor (+) RED
6 Coin Enable/Inhibit (+) -
7 Coin 1 - *Varies by country model
8 Coin 2 -
9 Coin 3 -
10 Coin 4 -

28 THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01

 ELECTRONIC PINOUTS AND SCHEMATICS

4.3 LOWER PLAYFIELD 48V DRIVER PINOUT NODE 8

520-1070-00 / 520-1057-00
CN11 .100" 12-Pin 1 V+ -
Header 2 8-SW-26 Switch -
3 8-SW-27 Switch -
4 8-SW-17 Switch LGN-RED
5 8-SW-18 Switch LGN-ORG
6 8-SW-19 Switch LGN-YEL
7 8-SW-20 Switch LGN-BLU
8 8-SW-21 Switch LGN-VIO
9 8-SW-22 Switch LGN-GRY
10 8-SW-23 Switch LGN-WHT
11 Ground BLK-ORG
12 Ground BLK-ORG
ID Type Pin Description Wire Color
CN12 .100" 10-Pin Head- 1 V+ RED
SW1 Address DIP - Node 8 - OFF-OFF-OFF-OFF - er (Orange) 2 8-SW-8 Switch WHT-BRN
CN4 RJ45 - SPIKE Node Bus Multi
3 8-SW-9 Switch WHT-RED
CN5 RJ45 - SPIKE Node Bus Multi
4 8-SW-10 Switch WHT-ORG
CN6 .156" 5-Pin Header 1 Ground BLK
5 8-SW-11 Switch WHT-YEL
Node Power 2 Key Key
6 8-SW-12 Switch -
3 N/C -
7 8-SW-13 Switch WHT-BLU
4 N/C -
8 8-SW-14 Switch PNK-BLK
5 48VDC In GRY
9 8-SW-15 Switch -
CN7 .156" 4-Pin Header 1 48V Driver Power GRY-OG
10 Ground BLK-RED
(White) 2 8-DR-8 Driver Return -
CN13 .100" 10-Pin 1 V+ RED
3 8-DR-6 Driver Return YEL-BLK Header 2 8-SW-0 Switch PNK-RED
4 8-DR-7 Driver Return YEL-BRN
3 8-SW-1 Switch PNK-ORG
CN8 .156 11-Pin Header 1 48V Driver Power GRY-ORG
4 8-SW-2 Switch PNK-YEL
(White) 2 48V Driver Power GRY-ORG
5 8-SW-3 Switch -
3 48V Driver Power GRY-ORG
6 8-SW-4 Switch PNK-BLU
4 48V Driver Power GRY-ORG
7 8-SW-5 Switch PNK-VIO
5 8-DR-0 Driver Return ORG-GRN
8 8-SW-6 Switch PNK-GRY
6 8-DR-5 Driver Return ORG-YEL
9 8-SW-7 Switch -
7 8-DR-1 Driver Return ORG-GRY
10 Ground BLK-BRN
8 8-DR-8 Driver Return -
CN14 .100" 8-Pin Header 1 Ground -
9 8-DR-4 Driver Return ORG-WHT
2 8-LP-7 Driver Return BRN-RED
10 8-DR-2 Driver Return ORG-VIO
3 8-LP-6 Driver Return BRN-ORG
11 8-DR-3 Driver Return ORG-BLU
4 8-LP-5 Driver Return BLU-BRN
CN9 .100" 8-Pin Header 1 V+ -
5 8-LP-4 Driver Return GRN-BRN
(Black) 2 V+ -
6 8-LP-3 Driver Return RED-BRN
3 8-SW-24 Switch GRY-RED
7 LED V+ YEL
4 8-SW-25 Switch GRY-BRN
8 LED V+ YEL
5 8-SW-26 Switch -
CN15 .100" 7-Pin Header 1 LED V+ YEL-BLK
6 8-SW-27 Switch VIO
2 LED V+ YEL-RED
7 Ground BLK-GRN
3 LED V+ YEL-BLU
8 Ground BLK-VIO
4 - -
CN10 .100" 9-Pin Header 1 V+ -
5 8-LP-0 GI Return WHT-BLK
2 8-SW-28 Switch GRY-WHT
6 8-LP-1 GI Return RED-BLK
3 8-SW-29 Switch GRY-VIO
7 8-LP-2 GI Return BLU-BLK
4 8-SW-30 Switch GRY-BLU
CN2 .100" 6-Pin Header, 1 Ground BLK
5 8-SW-31 Switch GRY-GRN Node Extension 2 DIN VIO-BLK
6 8-SW-16 Switch GRY-YEL Bus
3 DOUT VIO-BRN
7 Ground BLK-GRN
4 SCK VIO-RED
8 Ground BLK-GRN
5 RCK VIO-ORG
9 Ground BLK-GRN
6 V+ RED
CN3 .100" 6-Pin Header, 1 Ground BLK
Node Extension 2 DIN VIO-BLK
Bus
3 DOUT VIO-BRN
4 SCK VIO-RED
5 RCK VIO-ORG
6 V+ RED

THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01 29

ELECTRONIC PINOUTS AND SCHEMATICS

4.4 MID UPPER PLAYFIELD 48V DRIVER PINOUT NODE 9

520-1070-00 / 520-1057-00
CN11 .100" 12-Pin Header 1 V+ RED
2 9-SW-26 Switch -
3 9-SW-27 Switch -
4 9-SW-17 Switch TAN-ORG
5 9-SW-18 Switch -
6 9-SW-19 Switch TAN-GRN
7 9-SW-20 Switch TAN-BLU
8 9-SW-21 Switch -
9 9-SW-22 Switch -
10 9-SW-23 Switch -
11 Ground BLK-GRY
12 Ground BLK-GRY
ID Type Pin Description Wire Color
CN12 .100" 10-Pin Header 1 V+ -
SW1 Address DIP - Node 9 - OFF-OFF-ON-OFF - (Orange) 2 9-SW-8 Switch WHT-BRN
CN4 RJ45 - SPIKE Node Bus Multi
3 9-SW-9 Switch WHT-RED
CN5 RJ45 - SPIKE Node Bus Multi
4 9-SW-10 Switch WHT-ORG
CN6 .156" 5-Pin Header 1 Ground BLK
Node Power 5 9-SW-11 Switch -
2 Key Key
6 9-SW-12 Switch -
3 N/C -
7 9-SW-13 Switch -
4 N/C -
8 9-SW-14 Switch -
5 48VDC In GRY
9 9-SW-15 Switch -
CN7 .156" 4-Pin Header 1 48V Driver Power GRY-BRN
(White) 10 Ground BLK-WHT
2 9-DR-8 Driver Return -
CN13 .100" 10-Pin Header 1 V+ RED
3 9-DR-6 Driver Return YEL-GRN
2 9-SW-0 Switch PNK-RED
4 9-DR-7 Driver Return -
3 9-SW-1 Switch PNK-ORG
CN8 .156 11-Pin Header 1 48V Driver Power GRY-BRN
(White) 4 9-SW-2 Switch PNK-YEL
2 48V Driver Power GRY-BRN
5 9-SW-3 Switch PNK-GRN
3 48V Driver Power GRY-BRN
6 9-SW-4 Switch -
4 48V Driver Power GRY-BRN
7 9-SW-5 Switch PNK-VIO
5 9-DR-0 Driver Return BRN-RED
8 9-SW-6 Switch PNK-GRY
6 9-DR-5 Driver Return -
9 9-SW-7 Switch -
7 9-DR-1 Driver Return YEL-VIO
10 Ground BLK-BRN
8 9-DR-8 Driver Return -
CN14 .100" 8-Pin Header 1 Ground -
9 9-DR-4 Driver Return ORG-RED
2 9-LP-7 Driver Return ORG-BRN
10 9-DR-2 Driver Return ORG-BLK
3 9-LP-6 Driver Return ORG-RED
11 9-DR-3 Driver Return ORG-BRN
4 9-LP-5 Driver Return ORG-YEL
CN9 .100" 8-Pin Header 1 V+ -
(Black) 5 9-LP-4 Driver Return ORG-GRN
2 V+ -
6 9-LP-3 Driver Return ORG-BLU
3 9-SW-24 Switch -
7 LED V+ -
4 9-SW-25 Switch -
8 LED V+ YEL
5 9-SW-26 Switch -
CN15 .100" 7-Pin Header 1 LED V+ YEL-BLK
6 9-SW-27 Switch LGN-VIO
2 LED V+ YEL-RED
7 Ground -
3 LED V+ YEL-BLU
8 Ground BLK-BLU
4 - -
CN10 .100" 9-Pin Header 1 V+ RED
5 9-LP-0 GI Return WHT-BLK
2 9-SW-28 Switch GRY-BLK
6 9-LP-1 GI Return RED-BLK
3 9-SW-29 Switch GRY-BRN
7 9-LP-2 GI Return BLU-BLK
4 9-SW-30 Switch GRY-RED
CN2 .100" 6-Pin Header, 1 Ground -
5 9-SW-31 Switch GRY-ORG Node Extension Bus 2 DIN -
6 9-SW-16 Switch -
3 DOUT -
7 Ground BLK-BLU
4 SCK -
8 Ground BLK-BLU
5 RCK -
9 Ground BLK-BLU
6 V+ -
CN3 .100" 6-Pin Header, 1 Ground BLK
Node Extension Bus 2 DIN VIO-BLK
3 DOUT VIO-BRN
4 SCK VIO-RED
5 RCK VIO-ORG
6 V+ RED

30 THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01

 ELECTRONIC PINOUTS AND SCHEMATICS

4.5 CENTER MID LED BOARD 8B

520-8635-00
CN4 .100" 8-Pin Header 1 5V RED
2 LED32 -
3 LED33 ORG YEL
4 LED34 ORG GRN
5 LED35 ORG BLU
6 LED36 BLU RED
7 LED37 BLU YEL
8 LED38 BLU GRN
CN5 .100" 11-Pin Header 1 5V RED
2 5V RED
3 5V RED
4 LED39 BRN RED
5 LED40 BRN ORG
6 LED41 BRN GRN
7 LED42 BRN VIO
8 LED43 BRN GRY
9 LED44 BRN WHT
10 LED45 BRN YEL
11 LED46 BRN BLU
CN6 .100" 10-Pin Header 1 5V RED
2 5V RED
3 LED47 RED WHT
4 LED48 GRN WHT
5 LED49 BLU WHT
6 LED50 RED BLK
7 LED51 GRN BLK
8 LED52 BLU BLK
9 LED53 ORG GRY
10 LED54 ORG WHT
CN7 .100" 6-Pin Header 1 Ground BLK
ID Type Pin Description Wire Color 2 MISO Output Data VIO-BLK
CN1 .100" 7-Pin Header 1 Ground BLK 3 MOSI Input Data VIO-BRN
2 MISO Output Data VIO-BLK 4 SCK Serial Clock VIO-RED
3 MOSI Input Data VIO-BRN 5 RCK Register Clock VIO-ORG
4 SCK Serial Clock VIO-RED 6 +5 VDC IN RED
5 RCK Register Clock VIO-ORG CN8 .100" 14-Pin Header 1 5V RED
6 NC - 2 LED12 RED BRN
7 +5 VDC IN RED 3 LED13 GRN BRN
CN3 .100" 12-Pin Header 1 5V RED 4 LED14 BLU BRN
2 5V RED 5 LED15 RED ORG
3 5V RED 6 LED16 GRN ORG
4 5V - 7 LED17 BLU ORG
5 LED24 ORG BRN 8 LED18 RED YEL
6 LED25 GRN RED 9 LED19 -
7 LED26 GRN YEL 10 LED20 RED BLU
8 LED27 GRN BLU 11 LED21 RED VIO
9 LED28 GRN VIO 12 LED22 RED GRY
10 LED29 GRN GRY 13 LED23 ORG VIO
11 LED30 GRN 14 GND -
12 LED31 GRN WHT

THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01 31

ELECTRONIC PINOUTS AND SCHEMATICS

4.6 CENTER MID RIGHT LED 4.8 CENTER MID BOARD 8B3
BOARD 8B1 520-8634-00
520-8634-00

ID Type Pin Description Wire Color

CN1 .100" 4-Pin Header 1 5V RED
ID Type Pin Description Wire Color
2 LED1 BRN GRN
CN1 .100" 4-Pin Header 1 5V RED
3 LED2 BRN VIO
2 LED1 GRN RED
4 LED3 BRN GRY
3 LED2 GRN YEL
4 LED3 GRN BLU

4.7 BOTTOM LEFT BOARD 8B2 4.9 T LED BOARD 8B4

520-8638-00 520-8633-00

ID Type Pin Description Wire Color

CN1 .100" 7-Pin Header 1 5V RED
2 5V -
3 LED1 ORG YEL
4 LED2 ORG GRN
5 LED3 ORG BLU
6 LED4 BLU RED
7 LED5 BLU YEL ID Type Pin Description Wire Color
8 LED6 BLU GRN CN1 .100" 9-Pin Header 1 5V RED
9 LED7 - 2 5V -
3 LED1-R RED WHT
4 LED1-G GRE WHT
5 LED1-B BLU WHT
6 LED2 ORG GRY
7 LED3-R RED BLK
8 LED3-G GRE BLK
9 LED3-B BLU BLK

32 THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01

 ELECTRONIC PINOUTS AND SCHEMATICS

4.10 T LED BOARD 8B5 4.13 TOP CENTER LED BOARD 9A

520-8633-00 520-8637-00

ID Type Pin Description Wire Color

CN1 .100" 9-Pin Header 1 5V RED
2 5V -
3 LED1-R RED BRN
4 LED1-G GRE BRN
5 LED1-B BLU BRN
6 LED2 RED YEL
7 LED3-R RED ORG
8 LED3-G GRN ORG
9 LED3-B BLU ORG

4.11 LED BOARD 8B6

ID Type Pin Description Wire Color
520-8626-00 CN1 .100" 7-Pin Header 1 Ground BLK
2 MISO Output Data VIO-BLK
3 MOSI Input Data VIO-BRN
4 SCK Serial Clock VIO-RED
5 RCK Register Clock VIO-ORG
6 NC -
7 5V RED
CN3 .100" 8-Pin Header 1 5V RED
2 LED16 ORG BRN
3 LED17 ORG RED
4 LED18 -
ID Type Pin Description Wire Color
5 LED19 -
CN1 .100" 3-Pin Header 1 5V RED
6 LED20 -
2 LED1 BRN ORG
7 LED21 -
3 LED2 BRN YEL
8 LED22 ORG WHT
CN4 .100" 9-Pin Header 1 5V RED
4.12 LED BOARD 8B7 2 LED9 RED VIO
3 LED10 GRN VIO
520-8626-00 4 LED11 BLU VIO
5 LED12 RED GRY
6 LED13 GRN GRY
7 LED14 BLU GRY
8 LED15 ORG BLU
9 GND N/C
CN7 .100" 6-Pin Header 1 Ground BLK
2 MISO Output Data VIO-BLK
3 MOSI Input Data VIO-BRN
4 SCK Serial Clock VIO-RED
ID Type Pin Description Wire Color 5 RCK Register Clock VIO-ORG
CN1 .100" 3-Pin Header 1 5V RED 6 5V RED
2 LED1 RED GRY
3 LED2 RED VIO

THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01 33

ELECTRONIC PINOUTS AND SCHEMATICS

4.14 T LED BOARD 9A1 4.16 TOP LEFT LED BOARD 9B

520-8633-00 520-8636-00
LED3 LED1

CN7
MISO
MOSI
GND

SCK
RCK
5V
CN4
5V
5V
5V
LED8
LED9
LED7 LED10
LED11
LED12
LED13
LED14

MOSI
MISO
LED15

N/C
RCK
SCK

GND
5V
LED5 LED16
GND

LED24
LED23
LED22
LED21
LED20
LED19
LED18
LED17
CN1

5V
5V
5V
5V
LED6
CN3 LED4

ID Type Pin Description Wire Color

CN1 .100" 7-Pin Header 1 Ground BLK
2 MISO Output Data VIO-BLK
3 MOSI Input Data VIO-BRN
4 SCK Serial Clock VIO-RED
ID Type Pin Description Wire Color
5 RCK Register Clock VIO-ORG
CN1 .100" 9-Pin Header 1 5V RED
6 NC -
2 5V -
7 5V RED
3 LED1-R RED VIO
CN3 .100" 12-Pin Header 1 5V RED
4 LED1-G GRE VIO
2 5V -
5 LED1-B BLU BIO
3 5V -
6 LED2 ORG BLU
4 5V -
7 LED3-R RED GRY
5 LED17 RED BRN
8 LED3-G GRE GRY
6 LED18 GRN BRN
9 LED3-B BLU GRY
7 LED19 BLU BRN
8 LED20 RED ORG
9 LED21 GRN ORG
4.15 CENTER MID BOARD 9B2 10 LED22 BLU ORG
11 LED23 ORG VIO
520-8634-00 12 LED24 -
CN4 .100" 13-Pin Header 1 5V RED
2 5V RED
3 5V RED
4 LED8 BRN BLK
5 LED9 BRN RED
6 LED10 BRN ORG
7 LED11 BRN YEL
8 LED12 BRN GRN
9 LED13 BRN BLU
10 LED14 BRN VIO
ID Type Pin Description Wire Color 11 LED15 BRN WHT
CN1 .100" 4-Pin Header 1 5V RED 12 LED16 -
2 LED1 BRN BLK 13 GND -
3 LED2 BRN RED CN7 .100" 6-Pin Header 1 Ground -
4 LED3 BRN ORG 2 MISO Output Data -
3 MOSI Input Data -
4 SCK Serial Clock -
5 RCK Register Clock -
6 5V -

34 THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01

 ELECTRONIC PINOUTS AND SCHEMATICS

4.17 T LED BOARD 9B1 4.19 TROUGH SERIAL OPTO

520-8633-00 RECEIVER 8A
520-8516-00

ID Type Pin Description Wire Color

CN1 .100" 7-Pin Header 1 Ground BLK
2 MISO Output Data VIO-BLK
3 MOSI Input Data VIO-BRN
4 SCK Serial Clock VIO-RED
5 RCK Register Clock VIO-ORG
6 N/C -
7 +5 VDC IN RED
CN2 .100" 3-Pin Header 1 Ground BLK
2 N/C -
3 +5 VDC IN RED
CN3 .100" 6-Pin Header 1 Ground -
ID Type Pin Description Wire Color 2 MISO Output Data -
CN1 .100" 9-Pin Header 1 5V RED 3 MOSI Input Data -
2 5V - 4 SCK Serial Clock -
3 LED1-R RED BRN 5 RCK Register Clock -
4 LED1-G GRE BRN 6 V+ -
5 LED1-B BLU BRN
6
7
LED2
LED3-R
ORG VIO
RED ORG
4.20 MAIN POWER SUPPLY
8 LED3-G GRN ORG 011-5003-00
9 LED3-B BLU ORG

4.18 TROUGH SERIAL OPTO 9

8

TRANSMITTER 7
6

520-5344-00 5
4

ID Type Pin Description Wire Color

ID Type Pin Description Wire Color CN1 Screw Terminal 1 AC Line Hot In BLK
CN1 .100" 3-Pin Header 1 Ground BLK 2 AC Line Neutral In WHT
2 N/C - 3 Earth Ground In GRN
3 +5 VDC IN RED 4 DC Ground BLK
5 DC Ground BLK
6 DC Ground BLK
7 +48 V System Power GRY
8 +48 V System Power GRY
9 +48 V System Power GRY

THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01 35

ELECTRONIC PINOUTS AND SCHEMATICS

4.21 POWER DISTRIBUTION BOARD 4.22 POWER PLUG WIRING

520-8096-00
CAUTION
TO MAINTAIN SAFETY, GROUND WIRE FROM LINE FILTER
IS TO BE MOUNTED FIRST ON GROUNDING STUD AND
SECURED WITH NUT. ALL OTHER GROUNDS MAY THEN BE
ATTACHED TO GROUNDING STUD.

NORTH AMERICA
REPLACE ALL FUSES WITH CORRECT CURRENT RATINGS!

NORTH AMERICA NEMA 5-15 PREWIRED OUTLET

FUSE

ID Type Pin Description Wire Color

L

LINE FILTER G
CN1 .156 in 7-Pin Housing 1 +48 VDC IN GRY N
R1

R1: 10M OHM 0.5W

Plug: 045-5259-07 2 +48 VDC IN GRY

GROUNDING
3 +48 VDC IN GRY STUD
Pin: 055-5331-00
Key: 060-5013-00
4 Key (n/c)
5 Ground
-
BLK POWER SUPPLY
INTERNATIONAL
6 Ground BLK POWER DIST.
7 Ground BLK BILL VALIDATOR
(USER INSTALLED OPTION) ON/OFF SW
CN2 .093 in 3-Pos Plug 1 Line In (100-240 VAC) BLK
2 Neutral WHT
Plug: 045-5003-03
3 Earth Ground
*MFG NOTES:
GRN INTERNATIONAL FUSE
1. ALL DISCREET WIRE IS 16AWG 600V, UL 1015, CSA TYPE TEW.
Pin: 055-5013-09 2. NEMA 5-15 OUTLET HAS 14AWG 600V WIRE, UL 1015, CSA TYPE TEW. L
3. GROUND WIRE FROM LINE FILTER IS TO BE MOUNTED FIRST ON GROUNDING STUD
CN3 0.084 in 4-Pos Plug 1 +48 VDC to CPU Node GRY
AND SECURED WITH NUT. ALL OTHER GROUNDS LINE FILTER
MAY THEN BE ATTACHED TO G
R1
05/02/14
AC WIRING DIAGR
2 Door Interlock Switch Status
GROUNDING STUD.
4. GRY/RED
CABLE ARE TO BE MANUFACTURED IN A UL CERTIFIED FACILITY. VENDOR IS TO
N 1.00" 2.00" 1:1
Plug: 045-5200-04 PROVIDE A SIGNED U.L. CERTIFICATE OF COMPLIANCE WITH FIRST ARTICLE.
R1: 10M OHM 0.5W
X
3 Line Voltage Status VIO GROUNDING
SPIKE BB

Pin: 055-5033-08 4 Ground BLK STUD

CN4 0.084 in 6-Pos Plug 1 Door Interlock Switch +48V GRY
POWER SUPPLY
Plug: 045-5200-06 2 Door Interlock Switch +48V -
3 Switched 48V Out (to Node 1) GRY/YEL POWER DIST.
Pin: 055-5033-08 4 Door Interlock Return Ground GRY/RED ON/OFF SW
5 Door Interlock Return Ground -
6 Ground (to Node 1) BLK LINE CORDS
CN5 0.084 in 12-Pos Plug 1 Switched 48V Node Power *MFG NOTES: GRY
Part Number Description
Plug: 045-5200-12 2 Switched 48V Node Power 1.2. GROUND
GRY
ALL DISCREET WIRE IS 16AWG 600V, UL 1015, CSA TYPE TEW.
034-6012-00
WIRE FROM LINE FILTER IS TO BE MOUNTED FIRST LineON Cord, 3m,STUD
GROUNDING 5-15P USA
3 Switched 48V Node Power GRY
AND SECURED WITH NUT. ALL OTHER GROUNDS MAY THEN BE ATTACHED TO 05/02/14

Pin: 055-5033-08
GROUNDING STUD. 034-6012-01 Line Cord, 3m, CEE77P EUROPE 1.00" 2.00" 1:1
4 Switched 48V Node Power 3. PROVIDEGRY A SIGNED U.L. CERTIFICATE OF COMPLIANCE WITH FIRST ARTICLE.
CABLE ARE TO BE MANUFACTURED IN A UL CERTIFIED FACILITY. VENDOR IS TO
034-6012-02 Line Cord, 3m, BS1363P United Kingdom SPIKE BB
5 Switched 48V Node Power GRY
034-6012-03 Line Cord, 3m, AS-NZS4417P Australia
6 Switched 48V Node Power GRY
034-6012-04 Line Cord, 3m, CEI23-16P Italy
7 Node Ground BLK
034-6012-05 Line Cord, 3m, SEV1011P Switzerland
8 Node Ground BLK
034-6012-06 Line Cord, 3m, JIS8303P Japan
9 Node Ground BLK
034-6012-07 Line Cord, 3m, SI32P Israel
10 Node Ground BLK
034-6012-08 Line Cord, 3m, BS546P S Africa, India
11 Node Ground BLK
034-6012-09 Line Cord, 3m, IS6538P S. India
12 Node Ground BLK
CN6 .156 in 3-Pos
Plug: 045-5259-03
1 Ground - LINE FUSES
2 Ground -
Pin:055-5331-00 Line Voltage (Region) Fuse Type Part Number
3 +12VDC -
(18awg) Current
CN7 .084 2-Pos 1 +48 VDC to Topper Node GRY 120V (North America) 8A Slow Blow 30G 200-5000-05
Plug: 045-5200-02 2 Ground BLK 220/240v (Europe, Australia, 5A Slow Blow 5 x 200-5003-00
Pin:055-5033-08 UK) 20mm

36 THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01

 PARTS REFERENCE

5. PARTS REFERENCE
5.1 PLAYFIELD RUBBER PARTS RUBBER O-RINGS
ID Qty Size (ID) Size (OD) Durometer Color Part Number
1 1 3/16" 50 Black 545-5348-01
2 2 3/8" 50 Black 545-5348-03
3 3 3/4" 50 Black 545-5348-04
4 1 1" 50 Black 545-5348-05
5 2 1-1/4" 50 Black 545-5348-06
6 1 2-1/2" 50 Black 545-5348-09
7 16 7/16" 50 Black 545-5348-17
Figure 5.1.2. Rubber o-ring part numbers and usage. ID: Inner Diameter, OD: Outer
Diameter, Durometer: Higher number is firmer, less bounce, and more durable.
ID Qty Description Color Part Number
11 1 Plunger Tip Black 545-5276-00
12 2 Flipper Rubber Black 545-5277-00
13 1 Small Flipper Rubber Black 545-5207-00
14 14 4 Post Sleeve Black 545-5308-00
15 4 Bumper Pad Black 626-5067-01
16 1 Bumper Pad (Sub assemblies) Black 545-5105-00
17 4 Bumper Pad (Flippers) Black 545-5428-00

3 Figure 5.1.3. Other rubber part numbers and usage

5.2 RUBBER SIZE CHART

14 4 3-1/2”

3”
2-3/4”
2-1/2”
7
2”
1-3/4”
1 1-1/2”
1-1/4”
4 1”
3/4”
14 7

3
6
5
7

13
12 12

5/16” 3/16”

11
7/16” 3/8”
7/16” OD

3/8” OD

Figure 5.2.1. Rubber ring inner diameter sizing tool. Hold ring up to
Figure 5.1.1. Rubber o-ring part locations chart and read largest size on inside of ring. Dimensions are Inner
Diameter (ID) unless otherwise noted as Outer Diameter (OD).

THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01 37

PARTS REFERENCE

5.3 PLAYFIELD ASSEMBLIES, TOP

ID Part Number Description Qty
30 1 500-2512-Y5 Bottom Arch Assembly 1
2 755-51Y6-XX Instructions Card 1
3 755-7669-00 SPI Card 1
4 535-8385-00 Welded Hanger Bracket 1
19
5 509-2020-00 QR Reader 1
6 260-5000-00 Pinballs 6
7 500-6815-00 Bubble Level Assembly 1
10 8 511-5369-01 One Way Launch Gate Assembly 1
20 9 535-4092-12 Shooter Lane Ramp 1
UNDER 10 500-1043-03 Right Ramp Assembly 1
16 11 515-7840-05 Upper Right Wire Ramp Assembly 1
237-5871-00P Screw, 6-32 X 3/8" PFH Zinc, Patch 1
17 12 515-7840-09 Mid Right Wire Ramp 1
13 500-2692-01 Lower Right Metal Ramp Assembly 1
14 515-7840-02 Lower Right Wire Ramp 1
18 9 15 500-2700-03 Crossover Wire Ramp Assembly 1
11
16 500-2692-02 Left Metal Ramp Assembly 1
17 511-5354-01 Upper Left Plastic Ramp Assembly 1
18 515-7840-08 Left Wire Ramp Assembly 1
29 19 511-5352-15 Ball Guide Assembly -15 (Ramp Diverter) 1
12 232-5402-00P Screw, 10-32 X 1/2" PPH SEMS, PATCH 1
15 28 20 511-5370-00 Upper Loop One Way Assembly 1
21 511-5418-00 Left Lane Rollunder Assembly 1
22 511-5394-00 DR Plastic Ramp Assembly 1
23 500-2700-01 DR Wire Ramp Assembly 1
13 24 511-3226-00 DR Ball Diverter Assembly 1
25 511-5352-01 Ball Guide Assembly -01 (Has DR Spinner 1
Opto)
22 26 511-5052-22 Plastic Assembly -22 (Has DR Spotlights 1
on it)
27 511-5052-02 Plastic Assembly -02 (Has Right Lane 1
Spotlight)
28 511-5052-85 Plastic Assembly -85 (Has Right Sentinel 1
25 Spotlight)
29 Riveted Ball Guide Asy -19 (Top Launch
510-7952-19 One Way Gate) 1
23
14 30 535-2288-00 Backpanel Handle 1
21

26 24
27
8
7

3 5
6

2 1

Figure 5.3.1. Major

4 playfield assemblies,4 Top locations.

38 THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01

 PARTS REFERENCE

5.4 PLAYFIELD ASSEMBLIES, BOTTOM

ID Part Number Description Qty
1 520-1070-00 Core Node Driver Board 2
520-1057-00
2 520-8626-00 LED Board - 8b6, 8b7 2
3 520-8634-00 LED Board - 8b1, 8b3, 9b2 3
4 520-8633-00 LED Board - 8b4, 8b5, 9a1, 9b1 4
1
5 520-8635-00 LED Board - 8b 1
6 520-8636-00 LED Board - 9b 1
7 520-8637-00 LED Board - 9a 1
8 520-8638-00 LED Board - 8b2 1
17
9 500-1053-00 Beaker Leaper Assembly 1
17
10 500-5826-00 Sentinel Head Assembly - Pro 1
11 500-2940-00 Ramp Diverter Coil Assembly (Back Panel) 1
16 12 511-8960-00 Upper Left Loop Opto Assembly 1
3
15 13 500-7425-00 Magnet Assembly 1
14 511-8959-00 Left Opto Assembly (Crossover Shot Start) 1
15 500-2947-00 DR Ramp Diverter Coil Assembly 1
8 16 500-2678-01 Up Post Assembly 1
17 511-7621-00 Support Rail Assembly 2
2 18 500-5329-03 Pivot Bracket Assembly 2
19 535-5988-01 Edge Slide Bracket 2
3

1 5

14 2
3
4
13

7 4

18 18

10

9
19 19
12

11

Figure 5.4.1. Major playfield assemblies, Bottom locations.

THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01 39

PARTS REFERENCE

5.5 BACKBOX PARTS

3 3 LCD BACKBOX
5009995-XX
LCD BACKBOX
DOMESTIC VERSION
500-9995-XX

1 2

7 8 1

5
7 8
3
6

5
2
6
4

9
Figure 5.5.1. Backbox external assemblies and components Figure 5.5.2. Backbox internal assemblies and components

EXTERNAL INTERNAL
ID Part Number Description Qty ID Part Number Description Qty
1 660-5052-00 Backglass 1 1 509-1003-01 CPU Node Board 1
2 830-8427-Y5 Translite Art 1 2 520-8096-00 Power Distribution Board 1
3 545-5018-17 Plastic Extrusion 15-.450" 2 3 011-5003-00 Power Supply 48V/500W 1
4 545-5018-15 Glass Channel 26" 1 4 205-5001-00 Fuse Holder - Screw In 1
5 545-6313-01 Glass Lift Channel 26" 1 200-5000-05 8A SB Fuse 1
6 500-9996-00 LCD Speaker Panel Assembly 1 5 515-9769-00 Utility Outlet (USA) 1
7 820-76Y5-01 Left Backbox Decal 1 6 535-1130-00 Cover AC 1
8 820-76Y5-02 Right Backbox Decal 1 7 535-1129-00 Power Supply Bracket 1
515-9866-00 Backbox Bottom Bracket 1 8 535-1129-01 Power Supply Bracket 1
SPEAKER/LCD PANEL PARTS
9 180-5001-03 Power Switch500-9996-XX 1

5.6 SPEAKER PANEL PARTS

500-9996-00
11 7
ID Part Number Description Qty
1 031-5004-02 Speaker 2 4

2 116-0023-00 1366 x 768 Display LCD Panel 1

037-1116-00 LCD LVDS Cable 1 6
12
037-1115-00 LCD Back Light Cable [Innolux] 1
037-1119-00 LCD Back Light Cable [Sharp] 1
3 237-6188-01 Screw, M3x0.5 X 6MM PPH Sems Zinc 4 8
4 237-6307-06 6-32 X 3/8" Torx Stainless Steel Screw 2
5 240-5005-00 6-32 Nylon Stop Nut 12
6 242-5001-00 #6 Washer 16 13
7 355-5168-00-00 Nut: Lock w/ Cam 1 12
1
8 515-9842-00 Speaker Panel - LCD 1 9 10 2 6 6 13
5
9 515-9843-00 Speaker Plate 2 3
5
10 515-9845-00 Hinge, Speaker Panel, LCD 2
11 545-9877-00 LCD Window 1
12 545-9877-01 Spacer, Small - LCD Speaker Panel 4
13 626-5109-00 Speaker Foam - LCD Panel 2

40 THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01

 25

28 24

19
33 PARTS REFERENCE
16
21
12

5.7 CABINET PARTS

5 14

7
9 25

21 8 11
12 32

10

3 34
2

22
9 20 17

26
25
8
28 24
10
19
33 3 13
2 16
1
22 5 14 30
20 15 4
18
31
7
26
25 25

28 24
32 11

19
33 13
16 34

5 14
17 15 4

ID Part Number Description Qty

7
1 525-6026-01 Cabinet Assembly, Single Button 25 1
2 535-5989-00 Slide & Pivot Bracket - Left Side 1
3 535-5990-00 Slide & Pivot Bracket - Right Side 1 29
4 535-2051-00 Cabinet Playfield Support Bracket
11 1 13 6
32
5 500-7424-00 Front Molding Assembly W/ Instructions Plastic 1 1
6 535-7999-00 Pivot Hinge, Left - Wrinkle Black 1 30
13
7 535-7999-01 Pivot Hinge, Right - Wrinkle Black 34 1
18 27
8 254-5042-00 Spacer Nut, Hex, 1/2"OD,311/4-20 2
9 242-5084-00 Washer, 1/2" I.D., 3/16" THK 2
10 231-5072-00 1/4-20 X 1/2" Carriage Bolt 2
11 545-5017-00 Plastic Channel 2
12 545-5038-00 Glass Rear Extrusion 1 ID Part Number Description Qty
13 535-7297-02 Side Armor - Wrinkle Black 2 26 535-7772-00 Hair Pin Clip 1
14 500-2604-09 Ball Shooter Assembly - Basic Brite 1 27 500-5921-50 Leg Assembly - Wrinkle Black 4
15 535-5027-01 Plunger Support Plate, Notched 1 28 516-0007-00
29 Tilt Assembly 1
16 500-5816-00 Flipper Button - Yellow W/ Red Housing 2 6535-5029-00 Tilt Plumb Bob 1
13
17 500-1060-44-LED Start Button 1 29 820-76Y5-03 Decal, Cabinet Left, The Uncanny X-Men Pro 1
18 501-5018-173 Coin Door12-Chute No Emboss 1 30 820-76Y5-04 Decal, Cabinet Right, The Uncanny X-Men Pro 1
19 180-5160-01 30 Flipper Switch, Single 2 31 820-76Y5-05 Decal, Cabinet Front, The Uncanny X-Men Pro 1
20 545-5072-03 Grill - Speaker / Vent 1 32 660-5001-00 Playfield Glass 1
18 27
31 21 545-5072-02 Grill - Speaker / Vent 1 33 520-6967-72 Cabinet Node Board 1
22 031-5007-01 Speaker, Cabinet 8" Round, 4 ohm 1 34 535-2049-00 Corner Brackets For Cabinet Legs 4
23 545-5090-00 Cash Box - Plastic 1 234-5102-00 Screw, 8 X 5/8" SLT HWH AB Zinc 24
24 535-5013-03 Cash Box Cover 1 820-76Y5-XX Cabinet Decal Replacement Set, Speaker Panel
25 535-7562-00 Cash Box Lock Bracket Wire 1 Decal Not Included

THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01 41

PARTS REFERENCE

5.8 BALL SHOOTER ASSEMBLY 5.10 AUTO LAUNCH ASSEMBLY

500-2604-09 500-9818-02
7
2
3
1

2
8

5 6

14
4
9
1 13
7
12
17

11 9
4 5

ID Part Number Description Qty 18

1 535-5067-02 HOUSING ASSEMBLY 1
16
2 266-5001-09 COMPRESSED SPRING (LONG) - BRITE 1 10
BASIC 7
3 242-5014-00 WASHER 3/8 ID X 5/8 OD X 1/16" 3
4 515-6557-00 ROD ASSEMBLY 1 3

5 266-5010-00 COMPRESSED SPRING (SHORT) 1

6
6 270-5012-00 RETAINING RING, 3/8" 1
7 545-5276-00 RUBBER TIP 1
2

5.9 LOCKDOWN BAR

8

2
17

3 4
ID Part Number Description Qty
14 515-9689-01 11
MAIN BRKT: AUTO-PLUNGER 1
2 535-0728-00 KICKER ARM, AUTO-PLUNGER 1
1
3 270-5001-00 RETAINING E-RING, 3/16" SHAFT OD 1
10
4 545-5352-00 7
NYLINER, 3/16" SHAFT 1
53 090-5001-ND COIL - 23-800, NO DIODE 1
6 545-5411-00 6
COIL SLEEVE 1
7 266-5020-00 COMPRESSION SPRING-CONICAL 1
8 530-7834-00 PIN: KICKER ARM, AUTO-PLUNGER 1
9 232-5300-00 SCREW, 8-32 X 1/4" PPH SEMS 4
17
10 530-7835-00 PIVOT, AUTO-PLUNGER 1
11 545-5423-00 NYLINER, 1/4" SHAFT, 4L1-FF 1
ID Part Number Description Qty 12 237-5937-02 SCREW, 2-56 X 1/2" HWH MS 2
1 515-9950-00 FRONT MOLD 1 13 535-6539-00 SWITCH BODY PROTECT PLATE 1
2 830-5512-00 PLASTIC, FRONT MOLDING, THE UNCANNY 1 14 180-5157-01 SHOOTER SWITCH - SHORT ARM 1
X-MEN
15 545-6268-00 FISCHE PAPER 1
3 515-7791-00 CENTER BUTTON ASSEMBLY 1
16 535-0762-00 COIL BRACKET-AUTOPLUNGER 1
4 545-7292-10 SPACER, CENTER BUTTON 1
17 515-6304-03 PLUNGER / LINK ASSEMBLY 1
5 240-5003-01 PAL NUT (BOTTOM OF BUTTON, NOT PICTURED) 1
18 545-0762-00 FISCHE PAPER: AUTO-LAUNCHER 1

42 THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01

 PARTS REFERENCE

5.11 BALL TROUGH ASSEMBLY 5.12 SLINGSHOT ASSEMBLY

500-9820-01 500-9920-01
10 11 1 2
7
9
7

10

11

12 12 6
5
5
4 10
8
3

6
13

1
4
2 3

9
9 7

10
2 7 8

11

12 6
5

4 10
ID Part Number Description Qty
1 515-7811-00 MAIN BRKT. BALL TROUGH 1
2 515-7812-00 COIL BRACKET, BALL TROUGH 1
3 237-5975-04 SCREW, 8-32 X 1/4" HWH SWAGE SERR 2
1
4 266-5020-00 COMPRESSION SPRING-CONICAL 1
5 535-5203-03 COIL RETAINING BRACKET 1
ID Part 2Number
3 Description Qty
6 545-5076-01 COIL SLEEVE 1
1 515-5339-01 SLINGSHOT BRACKET ASSEMBLY 1
7 240-5102-00 8-32 NYLON LOCK NUT 4
3545-5105-00 2 090-5044-ND COIL 26-1200 - NO DIODE 1
8 8 RUBBER BUMPER 1
3 545-5031-00 COIL SLEEVE 1
9 515-7309-01 PLUNGER ASSEMBLY 1
4 535-5203-03 COIL RETAINER BRACKET 1
10 237-5909-00 SCREW, 4-40 X 1/4" PPH SEMS 4
5 232-5301-00 8-32 X 3/8 PPH MS EXT SEMS ZC 2
11 520-5344-00 TROUGH BOARD #1 - ILED TRANSMITTER 1
6 180-5231-00 SWITCH SLING SHOT 2 LUG CENTER 2
12 520-8516-00 TROUGH BOARD #2 - RECEIVER 1
7 535-5045-00 SWITCH PLATE 2
13 090-5004-ND COIL 27-1500 - NO DIODE 1
8 237-5976-04 6-32 X 5/8 SLOT SER HWH SW 4
98* 605-5006-00 SHRINK TUBING 1/8" .42 FT.
9 515-5340-01 ARM & TIP ASSEMBLY 1
99* 036-5611-11-F5 CABLE TROUGH OPTOS 1
10 270-5002-00 RETAINING RING - 1/4 DIA 2
11 515-5338-00 PLUNGER & LINK ASSEMBLY 1
12 266-5020-00 COMP SPRING CONICAL 1
13 036-5604-00 4" GENERIC JUMPER 2

THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01 43

 4 237-5976-04 SCREW, 6-32 X 5/8" HWH SWAGE 2 2 2 2 14
5 237-6388-00 SCREW, 6-32 X 3/8", SLOTTED HWH, TYPE F 3 3 3 3 9
6 237-6389-00 SCREW, 10-32 X 3/8", SHC 2 2 2 2
7 244-5003-00 #10 LOCK WASHER, SPLIT 2 2 2 2 1
8 254-5000-09 NYLON SPACER - BLACK - 3/8 OD X .175 ID X 1/4" - 2 - 2
9 265-5035-00 EXTENSION SPRING 1 1 1 1 16
10 269-5002-00 SPRING WASHER 1 1 1 1
6
11
12
PARTS REFERENCE
515-6308-01
515-7203-00
COIL STOP ASSEMBLY
PLUNGER / CRANK ASSEMBLY
1
1
1
1
1
-
1
-
13 515-7203-01 PLUNGER / CRANK ASSEMBLY - - 1 1
14 535-7275-00 FLIPPER BASE PLATE, RIGHT 1 1 - -
7 5

5.13 FLIPPER ASSEMBLY, LEFT & DR 5.14 FLIPPER ASSEMBLY, RIGHT

15 535-7275-01 FLIPPER BASE PLATE, LEFT - - 1 1
16 535-7354-00 SWITCH PLATE / SPRING RTN BRKT 1 1 - -
17 535-7354-01 SWITCH PLATE / SPRING RTN BRKT - - 1 1
F
18 535-7356-00 COIL BRACKET
Topper: 500-2638-00 1 1 1 1
19
20500-6543-12-ND
545-5070-00
545-5388-00
FLIPPER BUSHING
COIL SLEEVE
1
1
1
1
1
1
1
1 500-6543-02-ND
10
R

21 545-5428-00 RUBBER BUMPER QTY. 1 1

QTY. 1 1
ITEM QTY. QTY.
NO.
PART NUMBER DESCRIPTION 500-6543-0X 500-6543-1X
500-6543-4X 500-6543-2X 500-6543-5X 500-6543-3X
H PRODU
1 090-50XX-(XX)-ND FLIPPER COIL - SEE TABLE 1 1 1 1
15 DATE: 1
2 180-5149-00 SWITCH, END-OF-STROKE 1 - 3 1 - 3 APPROV
11 PARTS M
3 237-5975-00 SCREW, 8-32 X 3/8" HWH SWAGE ZN 2 2 2 2 17
4 237-5976-04 SCREW, 6-32 X 5/8" HWH SWAGE 2 2 2 2 14
5 237-6388-00 SCREW, 6-32 X 3/8", SLOTTED HWH, TYPE F
9 314 3 3 3 9
6 237-6389-00 SCREW, 10-32 X 3/8", SHC 2 2 2 2
1 1
7 244-5003-00 #10 LOCK WASHER, SPLIT 2 2 2 2
8 254-5000-09 NYLON SPACER - BLACK - 3/8 OD X .175 ID X 1/4" - 2 - 2
9 265-5035-00 6
EXTENSION SPRING 1 1 1 1 16
10 269-5002-00 SPRING WASHER 1 1 1 1
6 12
11 515-6308-01 COIL STOP ASSEMBLY
16 1 1 1 1 8
12 515-7203-00 PLUNGER / CRANK ASSEMBLY 1 1 - - 11
13 515-7203-01 PLUNGER / CRANK ASSEMBLY - - 1 2 13
5 1
14 535-7275-00 FLIPPER BASE PLATE, RIGHT 1 1 - -
7 54
15 535-7275-01 FLIPPER BASE PLATE, LEFT - - 1 1
16 535-7354-00 SWITCH PLATE / SPRING RTN BRKT 1 8 1 - - 500-
17 535-7354-01 SWITCH PLATE / SPRING RTN BRKT - - 1 1 FLIPPER ASSEMBLY, RIGHT, WITH E.O.S. SWITCH
7 FLIPPER
18 535-7356-00 COIL BRACKET
Topper: 500-2638-00 1 1 1 115
19 545-5070-00 FLIPPER BUSHING 1 1 1 1
RIGHT, R
20 545-5388-00 COIL SLEEVE 1 1 1 1
10
21 545-5428-00 RUBBER BUMPER 1 1 1 1

10 4 15
3 12
13
9 14
21

6
12
16 8
17 11
2 13
5
4

8
FLIPPER ASSEMBLY, RIGHT, WITH E.O.S. SWITCH
7 15
ID PartFLIPPER
NumberASSEMBLY,
Description
LEFT, WITH E.O.S. SWITCH
Qty ID Part Number Description Qty
1 090-5032-ND FLIPPER COIL 1 1 090-5032-ND FLIPPER COIL 1
* 090-5020-30-ND DR FLIPPER COIL - 23-900 1 2 180-5149-00 SWITCH, END-OF-STROKE 1
10 2 4
180-5149-00 SWITCH, END-OF-STROKE 1 3 237-5975-00 SCREW, 8-32 X 3/8" HWH SWAGE ZN 2
12 NOTES:
5
3 237-5975-00
13
090-5062-ND 23-1500
SCREW, 8-32 X 3/8" HWH SWAGE ZN 2 4 237-5976-04 SCREW, 6-32 X 5/8" HWH SWAGE 2
1. FIRST "X" IN PART NUMB
44 237-5976-0423-1100 SCREW, 6-32 X 5/8" HWH SWAGE
090-5030-ND 2 5 237-6388-00 SCREW, 6-32 X 3/8", SLOTTED HWH, TYPE F 2.3 SECOND "X" IN PART NU
2
35 090-5020-30-ND
237-6388-0023-900 SCREW, 6-32 X 3/8", SLOTTED HWH, TYPE F 3 6 237-6389-00 SCREW, 10-32 X 3/8", SHC 2
2 090-5032-ND
6 237-6389-0022-1080 SCREW, 10-32 X 3/8", SHC 2 7 244-5003-00 #10 LOCK WASHER, SPLIT 2
1 090-5020-20-ND 22-900
7 244-5003-00 #10 LOCK WASHER, SPLIT 2 8 265-5035-00 EXTENSION SPRING 1
COIL - X PART NUMBER COIL WINDING
8 265-5035-00
COIL TABLE
EXTENSION SPRING 17 1 9 269-5002-00 SPRING WASHER 1
9 269-5002-00 SPRING WASHER 1 10 515-6308-01 COIL STOP ASSEMBLY 1
10 515-6308-01 COIL STOP ASSEMBLY 1 11 515-7203-00 PLUNGER / CRANK ASSEMBLY 1
11 515-7203-01 PLUNGER / CRANK ASSEMBLY 1 12 535-7275-00 FLIPPER BASE PLATE, RIGHT 1
12FLIPPER ASSEMBLY, LEFT,
535-7275-01 WITH
FLIPPER E.O.S.
BASE SWITCH
PLATE, LEFT 1 13 535-7354-00 SWITCH PLATE / SPRING RTN BRKT 1
13 535-7354-01 SWITCH PLATE / SPRING RTN BRKT 1 14 535-7356-00 COIL BRACKET 1
14 535-7356-00 COIL BRACKET 1 15 545-5070-00 FLIPPER BUSHING 1
15 545-5070-00 FLIPPER BUSHING 1 16 545-5388-00 COIL SLEEVE NOTES: 1
5 090-5062-ND 23-1500
16 545-5388-00 COIL SLEEVE 1 17 545-5428-00 RUBBER BUMPER 1. FIRST 1
"X" IN PART NUMBER IDEN
4 090-5030-ND 23-1100 2. SECOND "X" IN PART NUMBER ID
3
17
090-5020-30-ND
545-5428-00
23-900
RUBBER BUMPER 1 18 515-5133-06-06 FLIPPER BAT AND SHAFT 1
2 18
090-5032-ND 515-5133-06-06
22-1080 FLIPPER BAT AND SHAFT 1 19 545-5277-00 FLIPPER RUBBER 1
1 *
090-5020-20-ND 544-2001-09-06
22-900 DR FLIPPER - YELLOW 1 PRODU
DATE: 12
COIL - X PART NUMBER COIL WINDING
19 545-5277-00 FLIPPER RUBBER 1 APPROVE
PARTS MU
COIL TABLE
* 545-5207-00 DR SMALL FLIPPER RUBBER - BLACK 1

44 THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01

 PARTS REFERENCE

5.15 POP BUMPER ASSEMBLY

1 20

19

10
18
17 14

12
2 11

15
8
3

16

7
4

13

Part Number Description Qty

511-1981-00 BUMPER/RING TOP ASSY, W/ LED 1
5 515-6459-04-ND BUMPER BOTTOM ASSY, NO DIODE 1

6
ID Part Number Description Qty
7 500-9934-00 POP BUMPER SWITCH ASSY-2 - LUG-RIGHT 1
8 240-5005-00 6-32 NYLON STOP NUT 3
9 090-5044-ND COIL - 26-1200 1
10 237-5976-01 #6-32 X 1/4" SHWH SWAGE ZN 2
11 240-5005-00 #6-32 NYLON STOP NUT 2
12 535-7347-00 METAL YOKE STOP 1
13 234-5101-00 * 8 X 1/2 SLT 6
ID Part Number Description Qty 14 530-5348-00 PLUNGER, POP BUMPER 1
1 511-1982-00 POP BUMPER LED MODULE 1 15 266-5047-00 COMPRESSION SPRING, POP BUMPER 1
2 545-5197-00 BUMPER BODY 1 16 545-5031-00 COIL SLEEVE 1
3 515-5085-01 RING AND ROD ASSY - TRIMMED 1 17 515-5939-00 COIL BRACKET POP BUMPER ASSY 1
4 545-5607-04 BUMPER SKIRT - TRIMMED 1 18 545-5609-00 FIBER YOKE 1
5 266-5048-00 BUMPER SKIRT COMP SPRING 1 19 535-7346-00 METAL YOKE 1
6 545-5195-00 BUMPER BASE 1 20 237-5957-00 #6-32 x 1-3/16" SPIRAL FIN SHANK SCREW 3

THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01 45

 PARTS REFERENCE

5.16 BOTTOM ARCH ASSEMBLY 5.18 RAMP DIVERTER COIL

500-2512-XX ASSEMBLY
3 4 5
500-2940-00
2

8
2

8 7 1 9 7 4 6

7 ID Part Number Description Qty

10
1 090-5044-ND COIL 26-1200 - NO DIODE 1
2 232-5300-00 SCREW, 8-32 X 1/4" PPH SEMS 4
3 240-5208-00 10-32 KEPS NUT 1
4 266-5020-00 COMPRESSION SPRING-CONICAL 1
5 280-5014-00 ADJUSTABLE BUMPER/STOP 1
9 6 515-7858-00 PLUNGER ASM, THE UNCANNY X-MEN 1
DIVERTER
ID Part Number Description Qty 7 535-5203-03 COIL RETAINING BRACKET 2
1 545-1238-00 BOTTOM ARCH, PLASTIC, QR READY, 1 8 535-9248-00 BRACKET 1
W/ FLASHER HOLES 9 545-5847-00 COIL SLEEVE 1
2 237-5887-01 SCREW, 4-40 X 3/4" PPH MS BLACK 2
3 820-96XX-01 PLASTIC ARCH DECAL SET -01 1
4
5
820-96XX-02
820-96XX-03
PLASTIC ARCH DECAL SET -02
PLASTIC ARCH DECAL SET -03
1
1 5.19 BACK RAMP DIVERTER
6
NO. 7
820-96XX-04
ITEM PART NUMBER
509-2020-00
PLASTIC ARCH DECAL SET -04
QR SCANNER DESCRIPTION
M306 ASSEMBLY
1
1 QTY. ASSEMBLY
1 545-1238-00
8 BOTTOM
254-5090-04
2 237-5887-01
ARCH, PLASTIC, QR READY, W/ FLASHER
PLASTIC SPACER #4 SCREW, 3/16" OD 2
- SCREW, 4-40 X 3/4" PPH MS BLACK
9/32" LENGTH
HOLES 1
2
511-5352-15
3 820-96XX-01 PLASTIC ARCH DECAL SET -01 1
9 240-5303-00 4-40 NYLON LOCK NUT 2 1
4 820-96XX-02 PLASTIC ARCH DECAL SET -02 1
10 820-5422-00
5 820-96XX-03 WARNING
PLASTICDECAL,
ARCHBOTTOM ARCH,
DECAL SET -03 QR 1 1
6 820-96XX-04 READER
PLASTIC ARCH DECAL SET -04 1
7 509-2020-00 QR SCANNER M306 ASSEMBLY 1

5.17 FLIPPER BUTTON - YELLOW

8 254-5090-04 PLASTIC SPACER #4 SCREW, 3/16" OD - 9/32" LENGTH 2
9 240-5303-00 4-40 NYLON LOCK NUT 2
10 820-5422-00 WARNING DECAL, BOTTOM ARCH, QR READER 1
WITH RED HOUSING
500-5816-00
NOTE:
1. "XX" IN ALL PART NUMBERS REFER TO GAME CODE.
2

2 1
ID Part Number Description Qty
ID Part Number Description Qty 1 535-4092-15 RAMP DIVERTER, THE UNCANNY X-MEN 1
1 545-1102-32 FLIPPER BUTTON HOUSING, RED 1 2 820-7960-56 DECAL -56, THE UNCANNY X-MEN 1
2 545-1103-36 FLIPPER BUTTON, YELLOW 1
3 270-5003-00 RETAINING RING 5/16" 1

46 THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01

 PARTS REFERENCE

5.20 MAGNET ASSEMBLY 5.22 LEFT OPTO ASSEMBLY

500-7425-00 511-8959-00
1
6 2
3
5
5

1
3

4
ID Part Number Description Qty
ID Part Number Description Qty 1 237-5880-00 SCREW, #6 X 3/8 PPH T-25 2
1 232-5202-00P SCREW, 6-32 X 1/2" PPH MS SEMS, 1 2 240-5303-00 4-40 NYLON LOCK NUT 1
PATCH 3 254-5090-08 PLASTIC SPACER #4 SCREW, 3/16" OD - 3/32" 1
2 242-5039-00 WASHER - 13/64 ID X 5/8 OD X .105 1 LENGTH
3 511-5065-ND MAGNET / CONNECTOR ASSY, 22-650 1 4 515-0215-00 LONG RANGE OPTO EMITTER ASSEMBLY 1
4 530-5266-01 MAGNET CORE 1 5 515-6798-00 STEPPED OPTO BRACKET, THE UNCANNY 1
5 535-6637-01 MAGNET BRACKET 1 X-MEN
6 520-8116-00 PCB, IR OPTO RECEIVER, ANTI-ROTATION 1

5.21 TOP LEFT RAMP OPTO

ASSEMBLY 5.23 SPOTLIGHT ASSEMBLY
511-5474-00 511-9776-00
3
3
1 2
4 1

ID Part Number Description Qty

ID Part Number Description Qty 1 237-6331-00P SCREW, 4-40 X 1/4" PPH MS BLACK, PATCH 1
1 237-5997-00P SCREW, 4-40 X 3/8" PPH MS BLACK, PATCH 4 2 520-7000-00 SINGLE FLASH LED BOARD 1
2 515-0215-00 LONG RANGE OPTO EMITTER ASSEMBLY 1 3 523-0033-00 FISCHE PAPER, MINI OPTOS 1
3 515-0215-01 LONG RANGE OPTO RECEIVER ASSEMBLY 1 4 535-3302-00 BRACKET, RIGHT FLASHER, THE UNCANNY 1
4 535-4106-00 RAMP OPTO PLATE, THE UNCANNY X-MEN 1 X-MEN

THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01 47

PARTS REFERENCE

5.24 UPPER LEFT LOOP OPTO 5.26 LEFT LANE ROLLUNDER

ASSEMBLY ASSEMBLY
511-8960-00 511-5418-00
3
4

5
2

4 2

1
3
1

ID Part Number Description Qty

ID Part Number Description Qty 1 535-4092-17 LEFT LANE ROLLUNDER BRACKET, THE 1
1 237-5880-00 SCREW, #6 X 3/8 PPH T-25 4 UNCANNY X-MEN
2 515-0215-00 LONG RANGE OPTO EMITTER ASSEMBLY 1 2 180-5010-04 MICRO-SWITCH 1
3 515-0215-01 LONG RANGE OPTO RECEIVER ASSEMBLY 1 3 535-3055-00 LEFT LANE ROLLUNDER GATE, THE UNCANNY 1
4 535-7897-00 LEFT LOOP OPTO BRACKET, THE UNCANNY 1 X-MEN
X-MEN 4 237-5937-02 SCREW, 2-56 X 1/2" HWH MS 2
5 535-6539-00 SWITCH BODY PROTECT PLATE 1

5.25 UPPER LOOP GATE ASSEMBLY 5.27 TOP LAUNCH ONE WAY
511-5370-00
ASSEMBLY
2 511-5422-00
3 2

ID Part Number Description Qty

1 180-5010-04 MICRO-SWITCH 1
2 237-5937-02 SCREW, 2-56 X 1/2" HWH MS 2
3 535-6539-00 SWITCH BODY PROTECT PLATE 1 ID Part Number Description Qty
4 535-3022-00 UPPER LOOP ONE WAY BRACKET, THE 1 1 510-7965-00 LAUNCH TOP GATE RIVETED ASM, THE 1
UNCANNY X-MEN UNCANNY X-MEN
5 535-3311-00 UPPER LOOP ONE WAY WIRE, THE UNCANNY 1 2 535-3024-00 LAUNCH ONE WAY WIRE, THE UNCANNY 1
X-MEN X-MEN

48 THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01

 PARTS REFERENCE

5.28 CEREBRO LOCK COIL 5.29 CEREBRO LOCK DIVERTER

ASSEMBLY ASSEMBLY
500-2947-00 511-3226-00
3
2 1 14 8 2

6 12
7
4
2

10
1

5 3

4 15

ID Part Number Description Qty

11 1 270-5002-00 RETAINING RING - 1/4" 1
13 2 530-8082-00 DR BALL DIVERTER, THE UNCANNY X-MEN 1
3 545-5348-17 7/16 O.D. RUBBER RING - BLACK 1
ID Part Number Description Qty
1 090-5044-ND COIL 26-1200 - NO DIODE 1 5.30 BOTTOM LAUNCH ONE WAY
2 237-5903-00P SCREW, 8-32 X 3/8" HWH, PATCH 4
3 237-5976-02 SCREW, 6-32 X 3/8" HWH SWAGE 3 ASSEMBLY
4 237-6144-00P SCREW, 10-32 X 3/4" SHCS, PATCH 2
5 240-5203-00 10-32 NYLON LOCK NUT 1
511-5369 -01
2
6 266-5020-00 COMPRESSION SPRING-CONICAL 1
7 515-6304-03 PLUNGER / LINK ASSEMBLY 1 6

8 515-6308-01 COIL STOP ASSEMBLY 1

9 530-5070-02 CRANK BAR 1
10 530-5139-00 BUSHING (CRANK BAR) 1
11 535-4114-00 DR RAMP DIVERTER COIL BRACKET, 1 3

THE UNCANNY X-MEN

12 535-4115-00 SLOTTED COIL RETAINING BRACKET, 1 1

TALL
4
13 545-5070-00 FLIPPER BUSHING 1
14 545-5411-00 COIL SLEEVE 1
15 545-5428-00 RUBBER BUMPER 1
5

ID Part Number Description Qty

1 LOCTITE THREAD LOCK 243 "BLUE MED STR"
2 237-5853-00P SCREW, 6-32 X 1/4" PFH, ZINC, PATCH 2
3 254-5008-17 HEX SPACER - 1 1/8 " 2
4 510-7966-00 LAUNCH GATE RIVETED ASM, THE UNCANNY 1
X-MEN
5 535-3024-00 LAUNCH ONE WAY WIRE, THE UNCANNY X-MEN 1
6 830-8573-57 PLAYFIELD PLASTIC -57, THE UNCANNY X-MEN 1

THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01 49

PARTS REFERENCE

5.31 BALL GUIDE ASSEMBLY -01 5.33 BALL GUIDE ASSEMBLY -08
511-5352-01 511-5352-08

4
2
3

7 6

ID Part Number Description Qty

1 240-5303-00 4-40 NYLON LOCK NUT 2
1
2 254-5090-01 PLASTIC SPACER #4 SCREW, 3/16" OD - 2
3
3/16" LENGTH
4
3 515-1992-00 SPINNER TARGET SUBASSY: NARROW, 1
OPTO
4 520-8541-00 PCA SPINNER REFLECTIVE OPTIC 1 ID Part Number Description Qty
5 535-4092-01 BALL GUIDE: -01, THE UNCANNY X-MEN 1 1 237-6197-00P SCREW, 4-40 X 3/16 PFH U/C 18-8 SS, 2
PATCH
6 820-7960-11 DECAL -11, THE UNCANNY X-MEN 1
2 535-4092-08 BALL GUIDE: -08, THE UNCANNY X-MEN 1
7 820-7960-12 DECAL -12, THE UNCANNY X-MEN 1
3 535-9648-00 BUMPER HOLDER - FASTENED 1
4 626-5067-01 RUBBER BUMPER - BLACK - FASTENED 1

5.32 BALL GUIDE ASSEMBLY -05

511-5352-05
5.34 BALL GUIDE ASSEMBLY -10
4 3 1
511-5352-10
2

4
3
1

ID Part Number Description Qty

1 237-6197-00P SCREW, 4-40 X 3/16 PFH U/C 18-8 SS, 4
PATCH
2 535-4092-05 BALL GUIDE: -05, THE UNCANNY X-MEN 1
3 535-9648-00 BUMPER HOLDER - FASTENED 2
1 3 4 2
4 626-5067-01 RUBBER BUMPER - BLACK - FASTENED 2

ID Part Number Description Qty

1 237-6197-00P SCREW, 4-40 X 3/16 PFH U/C 18-8 SS, 2
PATCH
2 535-4092-10 BALL GUIDE -10, THE UNCANNY X-MEN 1
3 535-9648-00 BUMPER HOLDER - FASTENED 1
4 626-5067-01 RUBBER BUMPER - BLACK - FASTENED 1

50 THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01

 PARTS REFERENCE

5.35 LOWER RIGHT METAL RAMP 5.37 LEFT METAL RAMP ASSEMBLY
ASSEMBLY 500-2692-02
500-2692-01 1

3 5 1
4 5

3
2
6
2

ID Part Number Description Qty

1 237-5909-01P SCREW, 4-40 X 3/8" PPH SEMS, PATCH 2
4
2 240-5303-00 4-40 NYLON LOCK NUT 1
3 254-5090-08 PLASTIC SPACER #4 SCREW, 3/16" OD - 3/32" 1
LENGTH
4 510-7954-01 RIVETED LOWER RIGHT RAMP ASSEMBLY, THE 1
UNCANNY X-MEN
5 515-0215-00 LONG RANGE OPTO EMITTER ASSEMBLY 1
6 520-8068-00 PCB, IR OPTO RECEIVER 1

5.36 UP POST ASSEMBLY

500-2678-01 ID Part Number Description Qty
8 1 237-5997-00P SCREW, 4-40 X 3/8" PPH MS BLACK, PATCH 4
2 2 242-5001-00 #6 WASHER 2
10
3 254-5008-04 HEX SPACER - 3/4 " 2
8 4 510-7954-02 RIVETED LEFT RAMP ASSEMBLY, THE UNCANNY 1
5 X-MEN
7
5 515-0215-00 LONG RANGE OPTO EMITTER ASSEMBLY 1
6 515-0215-01 LONG RANGE OPTO RECEIVER ASSEMBLY 1
6
7 820-7960-41 DECAL -41, THE UNCANNY X-MEN 1

4
9

3 1

ID Part Number Description Qty

1 LOCTITE THREAD LOCK 243 "BLUE MED STR"
2 090-5044-ND COIL 26-1200 - NO DIODE 1
3 232-5300-00 SCREW, 8-32 X 1/4" PPH SEMS 4
4 240-5208-00 10-32 KEPS NUT 1
5 266-5020-00 COMPRESSION SPRING-CONICAL 1
6 280-5014-00 ADJUSTABLE BUMPER/STOP 1
7 515-8866-01 PLUNGER, FLAT TIP - 4.09" LENGTH 1
8 535-5203-03 COIL RETAINING BRACKET 2
9 535-9248-00 BRACKET 1
10 545-5076-01 COIL SLEEVE 1

THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01 51

PARTS REFERENCE

5.38 RIGHT RAMP ASSEMBLY 5.39 RIGHT RAMP EXTENSION

500-1043-03 ASSEMBLY
500-1043-06
2

4 10
5
7
9
9
5 1 6

8
10

11

15 7

14 6

7 1

16

2
3 6 3
13

4
ID Part Number Description Qty 8
12
1 LOCTITE THREAD LOCK 243 "BLUE MED
STR"
2 237-6322-00P #6-32 X 3/8 PAN PHILLIPS w/DOUBLE SEMS, 4
BLACK, PATCH
ID Part Number Description Qty
3 240-5005-00 6-32 NYLON STOP NUT 2
1 LOCTITE THREAD LOCK 243 "BLUE MED
4 242-5001-01 WASHER 4 STR"
5 254-5008-05 HEX SPACER - 7/8 " 1 2 180-5010-04 MICRO-SWITCH 1
6 500-1043-06 RIGHT RAMP EXTENSION ASSEMBLY, PRO, 1 3 237-5500-01P SCREW, 6-32 X 1/4" PPH MS BLACK, PATCH 2
THE UNCANNY X-MEN
4 237-5937-02P SCREW, 2-56 X 1/2" HWH MS, PATCH 2
7 510-7954-03 RIVETED RIGHT RAMP ASSEMBLY, THE 1
5 237-5997-00P SCREW, 4-40 X 3/8" PPH MS BLACK, PATCH 4
UNCANNY X-MEN
6 242-5001-00 #6 WASHER 2
8 511-5052-23 PLAYFIELD PLASTIC ASM -23, THE 1
UNCANNY X-MEN 7 254-5008-05 HEX SPACER - 7/8 " 2
9 511-5052-40 PLAYFIELD PLASTIC ASM -40, THE 1 8 511-5052-34 PLAYFIELD PLASTIC ASM -34, THE 1
UNCANNY X-MEN UNCANNY X-MEN
10 820-7960-42 DECAL -42, THE UNCANNY X-MEN 1 9 515-0215-00 LONG RANGE OPTO EMITTER ASSEMBLY 1
10 515-0215-01 LONG RANGE OPTO RECEIVER ASSEMBLY 1
11 515-7838-06 RIGHT METAL RAMP EXTENSION, THE 2
UNCANNY X-MEN
12 535-3054-00 RIGHT RAMP ONE WAY WIRE, THE 1
UNCANNY X-MEN
13 535-6539-00 SWITCH BODY PROTECT PLATE 1
14 820-7960-43 DECAL -43, THE UNCANNY X-MEN 1
15 820-7960-44 DECAL -44, THE UNCANNY X-MEN 1
16 830-6185-04 RAMP COVER -04, THE UNCANNY X-MEN 1

52 THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01

 PARTS REFERENCE

5.40 UPPER LEFT PLASTIC RAMP 5.41 DR PLASTIC RAMP ASSEMBLY

ASSEMBLY 511-5394-00
511-5354-01
2

1 1
1 7
5 5
2
4
1
1 5 6

3
3
3 4
3
3

ID Part Number Description Qty

1 237-5504-00P SCREW, 6-32 X 3/4" PPH MS, PATCH 4
2 237-5508-00P SCREW, 6-32 X 1-1/4 PPH MS, PATCH 1 3
5
3 240-5005-00 6-32 NYLON STOP NUT 5
4 254-5000-07 NYLON SPACER - BLACK - 3/8 OD X 1
.175 ID X 3/4"
5 254-5000-09 NYLON SPACER - BLACK - 3/8 OD X 4
7
.175 ID X 1/4"
6 510-7955-01 RIVETED UPPER LEFT PLASTIC RAMP 1
ASSEMBLY, THE UNCANNY X-MEN ID Part Number Description Qty
7 830-6185-03 RAMP COVER -03, THE UNCANNY 1 1 237-5500-01P SCREW, 6-32 X 1/4" PPH MS BLACK, PATCH 2
X-MEN
2 237-5501-00P SCREW, 6-32 X 3/8" PPH MS ZINC, PATCH 1
3 240-5005-00 6-32 NYLON STOP NUT 1
4 510-7955-00 RIVETED DR PLASTIC RAMP ASSEMBLY, 1
THE UNCANNY X-MEN
5 511-5052-32 PLAYFIELD PLASTIC ASM -32, THE 1
UNCANNY X-MEN PRO
6 535-4092-16 DR RAMP PROTECTOR, THE UNCANNY 1
X-MEN
7 820-7972-01 UNDER RAMP DECAL -01, THE UNCANNY 1
X-MEN

THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01 53

PARTS REFERENCE

5.42 DR WIRE RAMP ASSEMBLY 5.43 CROSSOVER WIRE RAMP

500-2700-01 ASSEMBLY
500-2700-03
4

6
1
6

2
3 5 4

1 2

ID Part Number Description Qty

1 180-5010-04 MICRO-SWITCH 1
2 237-5938-01 SCREW, 2-56 X 3/8 HWH MS 2
3 515-7840-03 WIRE RAMP -03, THE UNCANNY X-MEN 1
4 535-3053-00 DR ROLLUNDER GATE, THE UNCANNY X-MEN 1
5 535-6539-00 SWITCH BODY PROTECT PLATE 1
6 820-7960-54 DECAL -54, THE UNCANNY X-MEN 1

ID Part Number Description Qty

5.44 WOLVERINE ASSEMBLY
1 180-5010-04 MICRO-SWITCH 1 511-3225-01
2 237-5938-01 SCREW, 2-56 X 3/8 HWH MS 2
3 515-7840-01 WIRE RAMP -01, THE UNCANNY X-MEN 1 2
3
4 535-3053-00 DR ROLLUNDER GATE, THE UNCANNY 1
X-MEN
5 535-6539-00 SWITCH BODY PROTECT PLATE 1
6 820-7960-55 DECAL -55, THE UNCANNY X-MEN 1
1

ID Part Number Description Qty

1 237-5997-00P SCREW, 4-40 X 3/8" PPH MS BLACK, PATCH 2
2 240-5303-00 4-40 NYLON LOCK NUT 2
3 535-4144-00 FASTBALL BKT, THE UNCANNY X-MEN 1
4 830-8573-80 PLAYFIELD PLASTIC -80, THE UNCANNY X-MEN 1

54 THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01

 PARTS REFERENCE

5.45 PLASTIC 02 ASSEMBLY 5.46 PLASTIC 08 ASSEMBLY

511-5052-02 511-5052-08
4

8
3

9
6

3 5

4 1

1
2

ID Part Number Description Qty

1 237-6169-00P SCREW, 4-40 X 1/4 PPH MS, PATCH 1
ID Part Number Description Qty 2 237-5501-00P #6-32 X 3/8 PPH MS, ZINC, PATCH 2
1 510-7979-02 RIVETED PLASTIC ASM -02, THE UNCANNY 1 3 242-5001-00 #6 WASHER 2
X-MEN 4 254-5008-02 HEX SPACER - 5/8 " 2
2 520-7000-00 SINGLE FLASH LED BOARD 1 5 510-7979-08 PLAYFIELD PLASTIC RIVETED ASM -08, 1
3 830-8573-33 PLAYFIELD PLASTIC -33, THE UNCANNY 1 THE UNCANNY X-MEN
X-MEN 6 520-7000-00 SINGLE FLASH LED BOARD 1
4 254-5008-02 HEX SPACER - 5/8 " 2
5 237-6378-00P #6-32 X 3/8 PAN PHILLIPS w/DOUBLE SEMS,
PATCH
4 5.47 PLASTIC 09 ASSEMBLY
6 242-5001-00 #6 WASHER 2 511-5052-09
7 237-5997-00P SCREW, 4-40 X 3/8" PPH MS BLACK, PATCH 1
8 830-8573-72 PLAYFIELD PLASTIC -72, THE UNCANNY 1 1
X-MEN
9 254-5103-02 SPACER, #4 ID X 1/4" OD X 1/8" L 1 5

ID Part Number Description Qty

1 237-6378-00P #6-32 X 3/8 PAN PHILLIPS w/DOUBLE SEMS, 4
PATCH
2 242-5001-00 #6 WASHER 2
3 254-5008-03 HEX SPACER - 1/2 " 2
4 830-8573-09 PLAYFIELD PLASTIC -09, THE UNCANNY X-MEN 1
5 830-8573-36 PLAYFIELD PLASTIC -36, THE UNCANNY X-MEN 1

THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01 55

PARTS REFERENCE

5.48 PLASTIC 12 ASSEMBLY 5.49 PLASTIC 16 ASSEMBLY

511-5052-12 511-5052-16
1
3

2 2

1
2

ID Part Number Description Qty

1 237-6378-00P #6-32 X 3/8 PAN PHILLIPS w/DOUBLE SEMS, 6
PATCH
2 242-5001-00 #6 WASHER 6
3 254-5008-03 HEX SPACER - 1/2 " 3
4 830-8573-16 PLAYFIELD PLASTIC -16, THE UNCANNY X-MEN 1
5 830-8573-50 PLAYFIELD PLASTIC -50, THE UNCANNY X-MEN 1
4

5.50 PLASTIC 18 ASSEMBLY

511-5052-18
1 2

ID Part Number Description Qty

1 237-6378-00P #6-32 X 3/8 PAN PHILLIPS w/DOUBLE SEMS, 6
PATCH
2 242-5001-00 #6 WASHER 4
3 254-5008-03 HEX SPACER - 1/2 " 4 1
4 830-8573-12 PLAYFIELD PLASTIC -12, THE UNCANNY 1
X-MEN
5 830-8573-38 PLAYFIELD PLASTIC -38, THE UNCANNY 1
X-MEN ID Part Number Description Qty
1 237-5809-00 SCREW, #6 X 1/2" PTH A 1
2 550-5052-01 MINI POST - CLEAR 1
3 830-8573-18 PLAYFIELD PLASTIC -18, THE UNCANNY 1
X-MEN

56 THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01

 PARTS REFERENCE

5.51 PLASTIC 21 ASSEMBLY 5.52 PLASTIC 22 ASSEMBLY

511-5052-21 511-5052-22
1 2

5 11

12
3
6

2
7

13

3
4

1 10

ID Part Number Description Qty

1 237-6378-00P #6-32 X 3/8 PAN PHILLIPS w/DOUBLE SEMS, 4
PATCH
2 242-5001-00 #6 WASHER 2
3 254-5008-03 HEX SPACER - 1/2 " 2
4 830-8573-21 PLAYFIELD PLASTIC -21, THE UNCANNY X-MEN 1
5 830-8573-35 PLAYFIELD PLASTIC -35, THE UNCANNY X-MEN 1

ID Part Number Description Qty

1 237-5997-00P SCREW, 4-40 X 3/8" PPH MS BLACK, PATCH 2
2 237-6378-00P #6-32 X 3/8 PAN PHILLIPS w/DOUBLE SEMS, 10
PATCH
3 242-5001-00 #6 WASHER 4
4 254-5008-03 HEX SPACER - 1/2 " 2
5 254-5008-05 HEX SPACER - 7/8 " 2
6 254-5103-02 SPACER, #4 ID X 1/4" OD X 1/8" L 2
7 520-5333-00 SINGLE RGB BOARD 2
8 535-3082-00 BRACKET, RGB LIGHTS, THE UNCANNY X-MEN 1
9 830-8573-22 PLAYFIELD PLASTIC -22, THE UNCANNY X-MEN 1
10 830-8573-30 PLAYFIELD PLASTIC -30, THE UNCANNY X-MEN 1
11 830-8573-31 PLAYFIELD PLASTIC -31, THE UNCANNY X-MEN 1
12 830-8573-70 PLAYFIELD PLASTIC -70, THE UNCANNY X-MEN 1
13 830-8573-71 PLAYFIELD PLASTIC -71, THE UNCANNY X-MEN 1

THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01 57

PARTS REFERENCE

5.53 PLASTIC 23 ASSEMBLY 5.54 PLASTIC 32 ASSEMBLY

511-5052-23 511-5052-32
2

8
1
20 8

12

10

15 7
17
18
19
13
7
11 5

5
6
16
14

9 4

2
9

9 3

ID Part Number Description Qty

1 077-5002-00 SOCKET - SHORT STAND-UP 2-LUG 2 ID Part Number Description Qty
2 112-5024-05F BLUE, FROSTED 1 1 237-5500-01P SCREW, 6-32 X 1/4" PPH MS BLACK, PATCH 2
3 112-5034-02F RED, FROSTED 1 2 237-5506-00 SCREW, 6-32 X 1" PPH MS 1
4 232-5308-00P SCREW, 6-32 X 1" PPH MS ZINC, BLACK 2 3 240-5005-00 6-32 NYLON STOP NUT 1
5 237-5976-01P SCREW, 6-32 X 1/4 HWH SWAGE, PATCH 2 4 254-5000-12 NYLON SPACER - BLACK - 3/8 OD X .175 ID X 3/8" 1
6 237-6322-00 SCREW, 6-32 X 3/8" PPH MS ZINC, BLACK 2 5 254-5000-19 NYLON SPACER - BLACK - 3/8 OD X .175 ID X 1/8" 1
7 237-6331-00P SCREW, 4-40 X 1/4" PPH MS BLACK, PATCH 7 6 520-5307-00 SINGLE LED PCB 1
8 237-6378-00P #6-32 X 3/8 PAN PHILLIPS w/DOUBLE SEMS, 2 7 535-3083-00 BRACKET, BILLBOARD, LEFT RAMP, THE 1
PATCH UNCANNY X-MEN
9 240-5005-00 6-32 NYLON STOP NUT 4 8 830-8573-32 PLAYFIELD PLASTIC -32, THE UNCANNY X-MEN 1
10 242-5001-00 #6 WASHER 2 9 830-8573-37 PLAYFIELD PLASTIC -37, THE UNCANNY X-MEN 1
11 254-5000-01 NYLON SPACER - BLACK - 3/8 OD X .175 ID X 1/2" 2
12 254-5008-03 HEX SPACER - 1/2 " 2
13 510-7979-23 PLAYFIELD PLASTIC RIVETED ASM -23, THE 1
UNCANNY X-MEN
14 520-5307-00 SINGLE LED PCB 2
15 830-8573-52 PLAYFIELD PLASTIC -52, THE UNCANNY X-MEN 1
16 830-8573-53 PLAYFIELD PLASTIC -53, THE UNCANNY X-MEN 1
17 830-8573-54 PLAYFIELD PLASTIC -54, THE UNCANNY X-MEN 1
18 830-8573-55 PLAYFIELD PLASTIC -55, THE UNCANNY X-MEN 1
19 830-8573-56 PLAYFIELD PLASTIC -56, THE UNCANNY X-MEN 1
20 830-8573-93 PLAYFIELD PLASTIC -93, THE UNCANNY X-MEN 1

58 THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01

 PARTS REFERENCE

5.55 PLASTIC 34 ASSEMBLY 5.57 PLASTIC 43 ASSEMBLY

511-5052-34 511-5052-43
1 4
4

8
5

3
1 6

4 7

5
2

ID Part Number Description Qty ID Part Number Description Qty

1 237-5502-03P SCREW, 6-32 X 1/2" PPH MS BLACK, PATCH 1 1 077-5002-00 SOCKET - SHORT STAND-UP 2-LUG 2
2 240-5005-00 6-32 NYLON STOP NUT 1 2 112-5024-05F BLUE, FROSTED 1
3 254-5000-19 NYLON SPACER - BLACK - 3/8 OD X .175 ID X 1/8" 1 3 112-5034-02F RED, FROSTED 1
4 520-5307-00 SINGLE LED PCB 1 4 232-5308-00P SCREW, 6-32 X 1" PPH MS ZINC, BLACK 4
5 830-8573-34 PLAYFIELD PLASTIC -34, THE UNCANNY X-MEN 1 5 240-5005-00 6-32 NYLON STOP NUT 4
6 254-5000-01 NYLON SPACER - BLACK - 3/8 OD X .175 ID X 1/2" 2

5.56 PLASTIC 40 ASSEMBLY 7

8
520-5307-00
830-8573-43
SINGLE LED PCB
PLAYFIELD PLASTIC -43, THE UNCANNY X-MEN
2
1
511-5052-40 9 254-5000-12 NYLON SPACER - BLACK - 3/8 OD X .175 ID X 3/8" 2

2
3

1 4

ID Part Number Description Qty

1 232-5308-00P SCREW, 6-32 X 1" PPH MS ZINC, BLACK 2
2 237-6331-00P SCREW, 4-40 X 1/4" PPH MS BLACK, PATCH 2
3 240-5005-00 6-32 NYLON STOP NUT 2
4 254-5000-01 NYLON SPACER - BLACK - 3/8 OD X .175 ID X 1/2" 2
5 510-7979-40 PLAYFIELD PLASTIC RIVETED ASM -40, THE 1
UNCANNY X-MEN
6 511-5052-43 PLAYFIELD PLASTIC ASM -43, THE UNCANNY 1
X-MEN
7 830-8573-42 PLAYFIELD PLASTIC -42, THE UNCANNY X-MEN 1

THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01 59

PARTS REFERENCE

5.58 PLASTIC 82 ASSEMBLY 5.59 PLASTIC 85 ASSEMBLY

511-5052-82 511-5052-85
2 3
6
1
7 12
21 10

19 9
22
4 6
13 2
1

12 1
2 5
5 12
7
11
16 8
15
18 3

17 19

14
4

10
4
20

ID Part Number Description Qty

1 237-5997-00P SCREW, 4-40 X 3/8" PPH MS BLACK, PATCH 2
9
2 237-6331-00P SCREW, 4-40 X 1/4" PPH MS BLACK, PATCH 3
3 240-5303-00 4-40 NYLON LOCK NUT 2
4 510-7979-85 PLAYFIELD PLASTIC RIVETED ASM -85, THE 1
UNCANNY X-MEN
5 520-7000-00 SINGLE FLASH LED BOARD 1
ID Part Number Description Qty 6 520-8457-00 PCB, SINGLE FLOOD LED - RED 1
1 232-5204-01 SCREW, 6-32 X 3/4" PPH SEMS BLACK 2 7 523-0033-00 FISCHE PAPER, MINI OPTOS 1
2 237-5503-01P SCREW, 6-32 X 5/8" PPH MS BLACK, PATCH 1 8 535-1305-00 BRACKET - PLASTIC MTG - 90° 1
3 237-5510-02 SCREW, 6-32 X 1-1/2" PPH MS BLACK 1 9 550-5032-02 HAT - RED SB 1
4 237-5809-00 SCREW, #6 X 1/2" PTH A 2 10 830-8573-86 PLAYFIELD PLASTIC -86, THE UNCANNY X-MEN 1
5 237-5997-00P SCREW, 4-40 X 3/8" PPH MS BLACK, PATCH 2
6 237-6322-00P SCREW, 6-32 X 3/8" PPH MS ZINC, BLACK 1
7 237-6331-00P SCREW, 4-40 X 1/4" PPH MS BLACK, PATCH 2
8 237-6378-00P #6-32 X 3/8 PAN PHILLIPS w/DOUBLE SEMS, 1
PATCH
9 240-5005-00 6-32 NYLON STOP NUT 4
10 240-5303-00 4-40 NYLON LOCK NUT 2
11 242-5001-00 #6 WASHER 2
12 242-5001-01 WASHER 5
13 254-5000-09 NYLON SPACER - BLACK - 3/8 OD X .175 ID X 1/4" 2
14 254-5000-12 NYLON SPACER - BLACK - 3/8 OD X .175 ID X 3/8" 3
15 254-5008-02 HEX SPACER - 5/8 " 1
16 510-7979-81 PLAYFIELD PLASTIC RIVETED ASM -81, THE 1
UNCANNY X-MEN
17 520-8457-00 PCB, SINGLE FLOOD LED - RED 1
18 550-5032-02 HAT - RED SB 1
19 550-5052-01 MINI POST - CLEAR 2
20 830-8573-82 PLAYFIELD PLASTIC -05, THE UNCANNY X-MEN 1
21 830-8573-83 PLAYFIELD PLASTIC -83, THE UNCANNY X-MEN 1
22 830-8573-84 PLAYFIELD PLASTIC -84, THE UNCANNY X-MEN 1

60 THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01

 PARTS REFERENCE

5.60 PLASTIC ASSEMBLY 87 5.61 SENTINEL HEAD ASSEMBLY

511-5052-87 500-5826-00

10 3 1
2
6

3
3 11 12
9

5
7

8 7 3 2
4

1
ID Part Number Description Qty 1
1 237-5997-00P SCREW, 4-40 X 3/8" PPH MS BLACK, PATCH 2 5
2 237-6322-00P SCREW, 6-32 X 3/8" PPH MS ZINC, BLACK 2 7
3 237-6331-00P SCREW, 4-40 X 1/4" PPH MS BLACK, PATCH 7
4 240-5005-00 6-32 NYLON STOP NUT 2
5 240-5303-00 4-40 NYLON LOCK NUT 2 3 7
6 510-7979-87 PLAYFIELD PLASTIC RIVETED ASM -87, THE 1
UNCANNY X-MEN
7 520-7000-00 SINGLE FLASH LED BOARD 2 ID Part Number Description Qty
BRACKET, LIGHT, TOY, THE UNCANNY 1 232-5200-00P SCREW, 6-32 X 1/4" PPH SEMS, PATCH 2
8 535-3086-00 X-MEN 1 2 237-5975-04 SCREW, 8-32 X 1/4" HWH SWAGE SERR 4
9 550-5032-02 HAT - RED SB 1 3 240-5102-00 8-32 NYLON LOCK NUT 2
PLAYFIELD PLASTIC -88, THE UNCANNY 4 511-0017-01 HEAD CARRIAGE ASSEMBLY PRO, THE UNCANNY 1
10 830-8573-88 X-MEN 1 X-MEN
PLAYFIELD PLASTIC -89, THE UNCANNY 5 511-8573-00 HEAD FRAME SUBASSEMBLY PRO, THE UNCANNY 1
X-MEN
11 830-8573-89 X-MEN 1
6 535-4139-00 TOP PLATE, THE UNCANNY X-MEN 1
12 830-8573-90 PLAYFIELD PLASTIC -90, THE UNCANNY 1
X-MEN 7 545-5348-17 7/16 O.D. RUBBER RING - BLACK 4

THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01 61

PARTS REFERENCE

5.62 SENTINEL HEAD CARRIAGE ASSEMBLY

511-0017-01

7
4 8
4

Head Pivot Plate

5

1.0”
1.0

Top Carriage Plate

3 6

ID Part Number Description Qty

1 040-5000-03 1/4" CABLE CLAMP 1
2 232-5200-00P SCREW, 6-32 X 1/4" PPH SEMS, PATCH 4
3 266-5020-02 COMPRESSION SPRING-CONICAL 1
4 270-5002-00 RETAINING RING - 1/4" 2
5 511-0018-01 HEAD TOP PLATE SUBASSEMBLY PRO, THE 1
UNCANNY X-MEN
6 511-0019-01 HEAD BOTTOM PLATE SUBASSEMBLY PRO, 1
THE UNCANNY X-MEN
7 511-0021-00 TILTING HEAD SUBASSEMBLY, THE UNCAN- 1
NY X-MEN
8 530-7865-10 PIVOT PIN-.250" DIA. 1

62 THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01

 PARTS REFERENCE

5.63 TOP PLATE SUB-ASSEMBLY 5.64 BOTTOM PLATE SUB-ASSEMBLY

511-0018-01 511-0019-01
7

3 2
12

16
6
9 1
10 6
8 5
2 6

19 11 1
18 3 9 5
4 4
11

ID Part Number Description Qty

17 1 040-5000-03 1/4" CABLE CLAMP 1
6
14
2 040-5016-00B CABLE CLAMP 0.38 BLACK 1
3 090-5091-00 COIL, 26-1200, NO DIODE, LUGLESS 1
7 4 232-5300-00P SCREW, 8-32 X 1/4" PPH SEMS, PATCH 2
5 240-5102-00 8-32 NYLON LOCK NUT 2
15 6 515-8002-00 CARRIAGE BOTTOM PLATE ASM 1
7 535-5203-03 COIL RETAINING BRACKET 1
8 8 545-5031-00 COIL SLEEVE 1
5

5.65 HEAD FRAME ASSEMBLY

13

511-8573-00
4

ID Part Number Description Qty

1 040-5000-03 1/4" CABLE CLAMP 1 2

2 040-5016-00B CABLE CLAMP 0.38 BLACK 1

3 180-5010-04 MICRO-SWITCH 1
4 237-5937-02P SCREW, 2-56 X 1/2" HWH MS, PATCH 2
5 237-5997-00P SCREW, 4-40 X 3/8" PPH MS BLACK, PATCH 4
6 240-5102-00 8-32 NYLON LOCK NUT 4
7 240-5208-00 10-32 KEPS NUT 1
8 254-5008-09 HEX SPACER - 1 1/2 " 2
9 270-5002-00 RETAINING RING - 1/4" 2 3
10 280-5014-00 ADJUSTABLE BUMPER/STOP 1
11 283-5018-06 1/4 ID X 3/8 OD X 3/16 LG. BUNTING SAE 841 4
BRONZE FLANGED BEARING-PART #EF040603
12 511-0020-00 KICKING TARGET SUBASSEMBLY, THE 1 5

UNCANNY X-MEN
13 511-0024-00 TILTING CHIN SUBASSEMBLY, THE UNCANNY 1 1
X-MEN
14 515-0215-00 LONG RANGE OPTO EMITTER ASSEMBLY 1 ID Part Number Description Qty
15 515-0215-01 LONG RANGE OPTO RECEIVER ASSEMBLY 1 1 237-5975-04 SCREW, 8-32 X 1/4" HWH SWAGE SERR 10
16 530-7865-09 PIVOT PIN-.250" DIA. 1 2 535-3088-00 HEAD FRAME BOTTOM PLATE PRO 1
17 535-5111-00 TOP CARRIAGE PLATE, THE UNCANNY X-MEN 1 3 535-3089-00 LEFT PLATE PRO, THE UNCANNY X-MEN 1
18 535-6539-00 SWITCH BODY PROTECT PLATE 1 4 535-3090-00 RIGHT PLATE PRO, THE UNCANNY X-MEN 1
19 545-6268-00 FISCHE PAPER 1 5 535-3091-00 HEAD ANCHOR PLATE, THE UNCANNY X-MEN 1

THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01 63

PARTS REFERENCE

5.66 SENTINEL KICKER TARGET 5.67 SENTINEL TILTING HEAD

ASSEMBLY ASSEMBLY
511-0020-00 511-0021-00

21
6
16
1 7

2 15

19

11

10

13
14 3
9
4
18

11
4

22
12
20 2
5 3
17

ID Part Number Description Qty 5

1 CABLE TIE, BLACK 1
2 090-5091-00 COIL, 26-1200, NO DIODE, LUGLESS 1 1
3 180-5010-04 MICRO-SWITCH 1
4 232-5300-00 SCREW, 8-32 X 1/4" PPH SEMS 3
5 237-5937-02 SCREW, 2-56 X 1/2" HWH MS 2
6 240-5005-00 6-32 NYLON STOP NUT 2
7 254-5000-09 NYLON SPACER - BLACK - 3/8 OD X .175 ID 1
X 1/4"
8 254-5000-18 NYLON SPACER - BLACK - 3/8 OD X .175 ID 1 ID Part Number Description Qty
X 3/16"
1 240-5102-00 8-32 NYLON LOCK NUT 6
9 265-5090-00 EXT SPRING SS 0.188 OPEN HOOKS X 0.75 1
2 283-5018-06 1/4 ID X 3/8 OD X 3/16 LG. BUNTING SAE 841 2
INSIDE LG
BRONZE FLANGED BEARING-PART #EF040603
10 266-5020-00 COMPRESSION SPRING-CONICAL 1
3 515-7891-00 HEAD RIVETED ASM, THE UNCANNY X-MEN 1
11 270-5002-00 RETAINING RING - 1/4" 2
4 535-5171-00 HEAD PIVOT PLATE, THE UNCANNY X-MEN 1
12 515-0016-00 KICK ARM ASSEMBLY 1
5 546-7967-00 CHIN SUPPORT 2
13 515-1082-00 KICKING TARGET ASSEMBLY, THE UNCANNY 1
X-MEN
14 515-6304-03 PLUNGER / LINK ASSEMBLY 1
15 515-8001-00 KICKER COIL BKT ASM, THE UNCANNY 1
X-MEN
16 520-8457-00 PCB, SINGLE FLOOD LED - RED 2
17 530-7834-00 PIN: KICKER ARM, AUTO-PLUNGER 1
18 530-7865-08 PIVOT PIN-.250" DIA. 1
19 535-5203-03 COIL RETAINING BRACKET 1
20 535-6539-00 SWITCH BODY PROTECT PLATE 1
21 545-5031-00 COIL SLEEVE 1
22 545-6268-00 FISCHE PAPER 1

64 THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01

 PARTS REFERENCE

5.68 SENTINEL CHIN ASSEMBLY 5.69 SENTINEL CHIN SUB-

511-0024-00 ASSEMBLY
12 8
511-5462-00
2 4

3
4

12
1

8
7

2 3

6 2
12
9
5

11
10
1

ID Part Number Description Qty

1 237-5608-00 SCREW, 8-32 X 1-1/4 PPH MS, ZINC 1 ID Part Number Description Qty
2 237-6388-00P SCREW, 6-32 X 3/8", SLOTTED HWH, TYPE F, 2 1 237-5912-00P SCREW, 4-40 X 3/16" PPH MS, PATCH 2
PATCH 2 283-5018-03 3/16 ID X 5/16 OD X 1/4 LG. BUNTING SAE 841 2
3 240-5102-00 8-32 NYLON LOCK NUT 1 BRONZE FLANGED BEARING-PART #EF030504
4 254-5008-04 HEX SPACER - 3/4 " 1 3 535-5197-00 CHIN BACKER 1
5 254-5114-07 NYLON SPACER - BLACK - 5/16" OD X .17 ID 1 4 545-7687-04 FINISHED CHIN, THE UNCANNY X-MEN 1
X 3/4"
6 265-5035-00 EXTENSION SPRING 1
7
8
270-5001-00
283-5018-06
RETAINING E-RING, 3/16" SHAFT OD
1/4 ID X 3/8 OD X 3/16 LG. BUNTING SAE 841
2
2
5.70 KICK TARGET ARM ASSEMBLY
BRONZE FLANGED BEARING-PART #EF040603
511-5463-00
9 511-5462-00 CHIN SUBASSEMBLY, THE UNCANNY X-MEN 1
10 515-6304-03 PLUNGER / LINK ASSEMBLY 1 2
11 530-7812-10 PIVOT PIN-.188 DIA. 1 3
12 535-5196-00 MOUTH PIVOT PLATE 2

ID Part Number Description Qty

1 237-5912-00P SCREW, 4-40 X 3/16" PPH MS, PATCH 2
2 283-5018-03 3/16 ID X 5/16 OD X 1/4 LG. BUNTING SAE 841 2
BRONZE FLANGED BEARING-PART #EF030504
3 535-5197-00 CHIN BACKER 1
4 545-7687-04 FINISHED CHIN, THE UNCANNY X-MEN 1

THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01 65

PARTS REFERENCE

5.71 BEAKER LEAPER ASSEMBLY 5.73 LEAPING LIQUID ASSEMBLY

500-1053-00 511-1051-00

1
4 6
2
2

1
5

ID Part Number Description Qty

1 511-3235-00 ASSEMBLY, BEAKER LEVER, THE UNCANNY X-MEN 1
4
2 511-1051-00 ASSEMBLY, LEAPING LIQUID, THE UNCANNY X-MEN 1 5
3 237-5997-00P SCREW, 4-40 X 3/8" PPH MS BLACK, PATCH 1
4 240-5303-00 4-40 NYLON LOCK NUT 1
3

5.72 BEAKER LEVER ASSEMBLY

ID Part Number Description Qty
511-3235-00 1 510-7979-92 RIVETED ASSY, PLASTIC #92, THE UNCANNY X-MEN 1
2 237-5997-00P SCREW, 4-40 X 3/8" PPH MS BLACK, PATCH 1
4 3 535-2171-00 LEAPER ROD 1
4 237-5887-01P SCREW, 4-40 X 3/4" PPH MS, BLACK, PATCH 1
5 545-5348-17 RUBBER RING, 7/16" OD X 1/8" ID, BLACK 2
6 240-5303-00 4-40 NYLON LOCK NUT 2
7 242-5002-01 #4 FLAT WASHER - 5/16" O.D. -BLACK 3
6

5.74 RAMP LIGHT ASSEMBLY

511-9778-00
5
7 1 2 3

2
3 1

ID Part Number Description Qty

WELDMENT, LEAPER MOUNT, THE UNCANNY
1 515-5393-00 1
X-MEN
ID Part Number Description Qty
2 535-0832-00 BRACKER, LEAPER LEVER, THE UNCANNY X-MEN 1
1 237-6169-00P SCREW, 4-40 X 1/4 PPH MS, PATCH 1
3 535-7970-02 WIRE, LEAPER, 1.0" LONG 1
2 520-5307-00 SINGLE LED PCB 1
4 535-4153-00 BRACKET, BEAKER MOUNT, THE UNCANNY X-MEN 1
3 535-1305-00 BRACKET - PLASTIC MTG - 90° 1
5 237-5909-00P SCREW, 4-40 X 1/4" PPH SEMS, PATCH 2
6 830-8573-91 PLASTIC #91, BEAKER, THE UNCANNY X-MEN 1
7 237-6331-00P SCREW, 4-40 X 1/4" PPH MS BLACK, PATCH 2

66 THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01

 PARTS REFERENCE

5.75 BACK PANEL ASSEMBLY

500-2691-01
1
20
17
10
23
5
3
3 4

21

12

24
9 16

27 6 18
2
15
13 5
19 3 4
8

11

22

25
26
14
13 28
7

ID Part Number Description Qty ID Part Number Description Qty

1 040-5000-06 1/2" CABLE CLAMP 3 RAMP COVER RIVETED ASM -02, THE
17 510-5827-02 1
2 077-5223-00 SOCKET, 2-LUG VERTICAL, SHORT 7 UNCANNY X-MEN
3 112-5024-05F BLUE, FROSTED 3 PLAYFIELD PLASTIC RIVETED ASM -15,
18 510-7979-15 1
THE UNCANNY X-MEN PRO
4 112-5034-02F RED, FROSTED 2
WOLVERINE ASSEMBLY, PRO, THE UN-
DOUBLE LED, BAYONET BASE - WHITE 19 511-3225-01 1
5 112-5034-08F 2 CANNY X-MEN
FROSTED
ASSEMBLY, RAMP LIGHT, THE UNCANNY
6 234-5000-00 SCREW, #6 X 3/8" HWH 22 20 511-9778-00 2
X-MEN
7 232-5308-00P SCREW, 6-32 X 1" PPH MS ZINC, BLACK 2
21 520-5307-00 SINGLE LED PCB 4
8 237-5511-01 SCREW, 6-32 X 1-3/4" PPH MS BLACK 2
22 525-9804-00 BACKPANEL, THE UNCANNY X-MEN 1
9 237-5805-00 SCREW, #6 X 1/2" PPH AB BLACK 14
23 535-2288-00 HANDLE, BACKPANEL 1
10 237-5995-00 SCREW, 10-32 X 1/2" HWH SERR MS ZI 2
PLAYFIELD PLASTIC -25, THE UNCANNY
11 240-5002-00 6-32 T-NUT 4 24 830-8573-25 1
X-MEN PRO
12 240-5204-00 #10-32 T-NUT 2 PLAYFIELD PLASTIC -26, THE UNCANNY
13 242-5001-01 WASHER 4 25 830-8573-26 1
X-MEN PRO
NYLON SPACER - BLACK - 3/8 OD X .175 PLAYFIELD PLASTIC -27, THE UNCANNY
14 254-5000-01 2 26 830-8573-27 1
ID X 1/2" X-MEN PRO
NYLON SPACER - BLACK - 3/8 OD X .175 27 830-8573-28 PLAYFIELD PLASTIC -28, THE UNCANNY 1
15 254-5000-04 2
ID X 1" X-MEN PRO
RAMP COVER RIVETED ASM -01, THE 28 830-8573-29 PLAYFIELD PLASTIC -29, THE UNCANNY 1
16 510-5827-01 1
UNCANNY X-MEN X-MEN PRO

THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01 67

SPECIFICATIONS

6. SPECIFICATIONS
500-55Y5-01

SPECIFICATIONS, MECHANICAL, GAME SETUP SPECIFICATIONS, ENVIRONMENT

Specification Imperial Metric Minimum Maximum
Weight 210 lbs 96 kg Temperature, Operating 32 °F / 0 °C 104 °F / 40 °C
Max dimensions, leg lev- 78 x 27.75 x 57 in 198 x 70.5 x 145 cm Temperature, Storage 32 °F / 0 °C 104 °F / 40 °C
elers extended (h, w, d) Relative Humidity, Operating 5% 95% non-condensing
Minimum game dimen- 76 x 27.75 x 57 in 193 x 70.5 x 145 cm Relative Humidity, Storage 5% 95% non-condensing
sions (h, w, d)
• (a) "The appliance has to be placed in a horizontal posi-
Minimum room dimen- 80 x 36 x 84 in 203 x 91 cm x 214 cm
sions per game (h, w, d)
tion."
• (b) If the supply cord is damaged, it must be replaced by
• (h, w, d) = height, width, depth. the manufacturer, its service agent or similarly qualified
SPECIFICATIONS, MECHANICAL, BOXED person in order to avoid hazard.

Specification Imperial Metric

Weight, boxed (without
pallet)
230 lbs 105 kg
6.1 GAME DIMENSIONS
Box dimensions (h, w, d) 56.5 x 31 x 31 in 144 x 79 x 79 cm
Minimum dimensions (h, 76 x 26 x 57 in 193 x 66 x 145 cm
w, d)
• (h, w, d) = height, width, depth.

SPECIFICATIONS, ELECTRICAL
Specification North America - International - 240VAC
120VAC
Line Voltage, Nominal 120 VAC 240 VAC
Line Voltage Range 90 VAC - 250 VAC 90 VAC - 250 VAC
Line Frequency * 60 Hz 50 Hz, 60 Hz
Line Power, Current - 70 W, 0.6 A @ 120 70 W, 0.3 A @ 240 VAC
attract mode VAC
Line Power, Current - 360 W, 3 A @ 120 VAC 360 W, 1.5 A @ 240 VAC
nominal
Line Power, Current - 540 W, 4.5 A @ 120 540 W, 2.25 A @ 240 VAC
peak, <100 ms VAC
* NOTE: Games designed for 60hz operation (e.g. North Amer-
ica games) will not function correctly on 50hz power and vice
versa.
WARNING: Overloading electrical supply circuits is dangerous.
Do not overload circuits. To calculate the maximum number of
games for a circuit, check circuit amperage rating and divide
by the game Nominal Line Power Current rating for your line
voltage. For example, a 15A 120V household circuit, 15/3 A
(nominal current) = 5 games maximum.

68 THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01

 SPECIFICATIONS

6.2 WARRANTY 6.3 WARNINGS, COMPLIANCE,

Stern Pinball machines are assembled in Elk Grove Village,
Illinois, USA; each pinball machine has unique characteristics
AND LEGAL NOTICES
that make it a one-of-a-kind American-made product. Each
PHOTOSENSITIVE SEIZURES HEALTH WARNING
machine will have variations in appearance resulting from
differences in the machine’s particular wood parts, individual A very small percentage of people may experience a seizure
when exposed to certain visual images, including flashing
silk screened art and mechanical assemblies. Stern Pinball lights or patterns. Even people with no history of seizures
has inspected each game element to ensure it meets stringent of epilepsy may have an undiagnosed condition that can
quality and playability standards. cause “photosensitive epileptic seizures” due to certain visual
images, flashing lights or patterns. Symptoms can include lightheadedness,
altered vision, eye or face twitching, jerking or shaking of arms or legs,
disorientation, confusion, momentary loss of awareness, and loss of
consciousness or convulsions that can lead to injury from falling down or
striking nearby objects.

IMMEDIATELY STOP PLAYING AND CONSULT A DOCTOR IF YOU

STERN PINBALL INC LIMITED WARRANTY EXPERIENCE ANY OF THESE SYMPTOMS.
For warranty information, please visit:
PARTS SUBSTITUTIONS
• sternpinball.com/support/warranty For safety and reliability, substitute parts and equipment
modifications are not recommended and may void any
and all warranties. Use of Non-Stern Pinball Inc Parts or
Modifications of game circuitry may adversely affect game
play or game safety. Transport pinball machines with hinged
backbox in the down position only! Always take great care
when servicing any game. Always ready the service manual before replacing
or servicing components. Substitutions of parts or equipment modifications
may void FCC type acceptance.

Always disconnect the line voltage before servicing. Some parts may remain
energized when unplugged. Take great caution when servicing any electrical
components.

PERCHLORATE MATERIAL - Special handling may apply.

See www.dtsc.ca.gov/hazardouswaste/perchlorate
ATTENTION! FCC CLASS A SUBPART J COMPLIANCE
IMPORTANT WARRANTY INFORMATION This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to
The electronics system, node network architecture, part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
mechanical devices and associated software control when the equipment is operated in a commercial
systems in this pinball machine are designed to work environment. This equipment generates, uses, and can
with genuine Stern Pinball accessories and devices. radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may
cause harmful interference to radio communications.
Installation of non-authorized accessories, lamps, Operation of this equipment in a residential area is likely
LED’s, motors or other devices or modification of to cause harmful interference in which case the user will
electro-mechanical devices may damage the system be required to correct the interference at his own expense.

and may void your warranty.

RF INTERFERENCE NOTICE
The cable harness placements, ground strap routing, and other shielding
820-6617-00
have been designed to keep RF radiation and conduction within levels
accepted by FCC rules. To maintain these levels, factory harness position,
shielding, and ground straps must be installed in their factory locations
should they become disconnected during maintenance.

COPYRIGHT AND INTELLECTUAL PROPERTY NOTICE

This document and the data disclosed herein or herewith is not to be
reproduced (Except where noted), used, or otherwise disclosed in whole or
in part to anyone without written consent of Stern Pinball Inc.

Products in this manual, the company name and devices and the design
of the manual itself are protected by federal patents (and patents pending),
design registrations, trademarks, and copyrights. Action will be taken
in the event of infringement or imitation. The right is reserved to change
specifications without prior notice.

THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01 69

SPECIFICATIONS

6.4 STERN PINBALL END USER LICENSE AGREEMENT

This limited software license Agreement (“Agreement”) applies to your use of Stern Pinball Software pre-installed on a
Stern Pinball Machine and any Authorized Updates made available to you.
BY USING YOUR STERN PINBALL MACHINE, YOU AGREE TO THE TERMS OF THIS AGREEMENT. If you do not agree
to the terms of this Agreement, do not use your Stern Pinball Machine or any Authorized Updates. Please read this entire
Agreement, which governs your use of the Stern Pinball Machine, Stern Pinball Software and all Authorized Updates.

ADULT CONSENT
TO ENTER INTO THIS AGREEMENT, YOU MUST BE AN ADULT OF THE LEGAL AGE OF MAJORITY IN YOUR COUNTRY OF
RESIDENCE. YOU ARE LEGALLY AND FINANCIALLY RESPONSIBLE FOR ALL ACTIONS USING YOUR STERN PINBALL
MACHINE AND SOFTWARE AND ACCESSING OR USING ANY ONLINE GAMING PLATFORM, INCLUDING THE ACTIONS OF
ANYONE YOU ALLOW TO USE AND ACCESS TO YOUR MACHINE AND ANY ASSOCIATED ACCOUNT. YOU AFFIRM THAT
YOU HAVE REACHED THE LEGAL AGE OF MAJORITY, UNDERSTAND AND ACCEPT THIS AGREEMENT. IF YOU ARE UNDER
THE LEGAL AGE OF MAJORITY, YOUR PARENT OR LEGAL GUARDIAN MUST CONSENT TO THIS AGREEMENT.

DEFINITIONS
a. “Stern Pinball Machine” means a Stern Pinball arcade game machine.

b. “Stern Pinball Software” means software (including but not limited to firmware) pre-installed in the Stern Pinball Machine,
including all Authorized Content and any Authorized Updates that Stern Pinball may make available to You from time to time.

c. “Authorized Content” means all Stern Pinball and third-party owned software and content incorporated into or used with the
Stern Pinball Software or otherwise embedded in or utilized by a Stern Pinball Machine, including but not limited to graphics,
images, music, vocals and voices.

d. “Authorized Update” means an update to the Stern Pinball Software distributed by Stern Pinball or otherwise made available
by Stern Pinball, including for download on its website.

e. “Unauthorized Content” means all content, including but not limited to graphics, images, music, vocals and voices, that does
not comprise Authorized Content or an Authorized Update.

f. “Unauthorized Software” means any software (including but not limited to firmware) not pre-installed by Stern Pinball on a
Stern Pinball Machine or that does not comprise Authorized Content or Authorized Update.

g. “You” means the purchaser or current owner of a Stern Pinball Machine.

LICENSE
Stern Pinball hereby grants You a nonexclusive, non-transferable, limited, and revocable right and license to use one copy of the
Stern Pinball Software and Authorized Content and any Authorized Update solely for your personal use, or that of your patrons
and customers if you are a commercial entity, for playing a single Stern Pinball Machine. The Stern Pinball Software, Authorized
Content and Authorized Updates are licensed, not sold, to You, and no ownership rights are transferred by this Agreement. The
Stern Pinball Software Authorized Content and Authorized Updates are protected by U.S. and international copyright. All rights
not explicitly granted to you in this Agreement are reserved by Stern Pinball.
a. As a condition to this Stern Pinball Software license, You agree that:

i. You will not copy, reproduce, alter, replace, distribute, reverse engineer, decompile, disassemble, display, perform, create
derivative works based on, or otherwise modify the Stern Pinball hardware or Stern Pinball Software or any Authorized
Update, in whole or in part; and will not commercially exploit any of the foregoing.

ii. You will not use or install any Unauthorized Content or Unauthorized Software. Use of Unauthorized Content
or Unauthorized Software may result in your Stern Pinball Machine ceasing to work permanently and/or losing
access to Stern Pinball’s online game network, either immediately or after a later installed Authorized Update.

70 THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01

 SPECIFICATIONS

iii. You will not create, develop, distribute or assist anyone else in creating, developing or distributing any
Unauthorized Content or Unauthorized Software intended for use with a Stern Pinball Machine, whether to add
to or modify the gameplay, any audio content (whether music, sound or voice), or any video content of any Stern
Pinball Machine, or to gain advantage in any online or other game modes, or otherwise.

iv. You will not share any Stern Pinball Software, Authorized Content or Authorized Update with any other person or company
and will not permit anyone else to access or copy any Stern Pinball Software or Authorized Content or Authorized Update
installed on your Machine for any purpose.

v. In view of the rights held by third-party owners of Authorized Content (e.g., music and video clips), Stern does not have
the legal authority to give permission to stream the gameplay of Stern Pinball Machines.

vi. You will not attempt to defeat or circumvent any anti-piracy, security, and/or technical measures to control access
to the Stern Pinball Software, features, functions or content, prevent unauthorized use, or otherwise prevent anyone
from exceeding the limited license rights granted under this Agreement, “Security Measures”. Attempting to defeat
or circumvent any Security Measure may result in your Stern Pinball Machine ceasing to work permanently either
immediately or after a later installed Authorized Update.

vii. Stern Pinball may update the Stern Pinball Software from time to time without further notice to You, for example,
to update any anti-piracy, security, and technical measure.

PRIVACY POLICY
Your use of the Stern Pinball Machine, Stern Pinball Software and any Authorized Updates is subject to Stern Pinball’s Privacy
Policy which can be found at https://sternpinball.com/privacy-policy.

WARRANTY
EXCEPT AS PROVIDED HEREIN, THE STERN PINBALL SOFTWARE, AUTHORIZED CONTENT AND AUTHORIZED UPDATES
ARE PROVIDED "AS IS" AND, TO THE MAXIMUM EXTENT ALLOWABLE UNDER LAW, STERN PINBALL DISCLAIMS ALL
WARRANTIES OF ANY KIND, WHETHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NONINFRINGEMENT. WITHOUT LIMITING THE
FOREGOING, STERN PINBALL DOES NOT WARRANT THAT OPERATION OF THE STERN PINBALL MACHINE OR ANY ONLINE
OR CONNECTED GAME NETWORK WILL BE UNINTERRUPTED OR ERROR-FREE.

EXCLUSION OF CERTAIN DAMAGES

STERN PINBALL IS NOT RESPONSIBLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, OR CONSEQUENTIAL
DAMAGES; ANY LOSS OF DATA, PRIVACY, CONFIDENTIALITY, OR PROFITS; OR ANY INABILITY TO USE THE STERN
PINBALL MACHINE, STERN PINBALL SOFTWARE OR ANY AUTHORIZED UPDATE. THESE EXCLUSIONS APPLY EVEN IF
STERN PINBALL HAS BEEN ADVISED OF THE POSSIBILITY OF THESE DAMAGES, AND EVEN IF ANY REMEDY FAILS OF ITS
ESSENTIAL PURPOSE. Some countries do not allow the exclusion or limitation of incidental or consequential damages, so this
limitation or exclusion may not apply to You.
These terms apply to the maximum extent permitted by law and unless prohibited by law. These terms do not change your rights
under the laws of your country if those laws do not permit that change.

TERRITORY AND CHOICE OF LAW

This License is valid only in the country in which you purchased your Stern Pinball Machine. This License will be subject to
and construed in accordance with the laws of the State of Illinois, U.S.A., regardless of conflict of laws principles. You agree to
submit to the exclusive jurisdiction of the state and federal courts in Cook County, Illinois, U.S.A. for the resolution of any dispute
regarding this Agreement or the subject matter of this Agreement and to waive any jurisdictional, venue, or inconvenient forum
objections to such courts.
This Agreement may be updated by Stern Pinball from time to time with the current version posted at www.sternpinball.com/
EULA. Your continued use of the Stern Pinball Software and Authorized Update after an updated Agreement has been posted
constitutes your acceptance of all of its terms.

THE UNCANNY X-MEN PRO MANUAL 500-55Y5-01 71

1-800-KICKERS THE UNCANNY X-MEN PRO #500-55Y5-01
MANUAL #780-50Y5-00
[email protected]
WWW.STERNPINBALL.COM
FACEBOOK.COM/STERNPINBALL *780-50Y5-00*