SG275 | 14.
2L | 275 kW
INDUSTRIAL SPARK-IGNITED GENERATOR SET
EPA Certified Stationary Emergency and Non-Emergency
DEMAND RESPONSE READY
Standby Power Rating
275 kW, 344 kVA, 60 Hz
Demand Response Rating
275 kW, 344 kVA, 60 Hz
Prime Power Rating
248 kW, 309 kVA, 60 Hz
Image used for illustration purposes only
Codes and Standards Powering Ahead
Not all codes and standards apply to all Generac ensures superior quality by designing and
configurations. Contact factory for details. manufacturing most of its generator components, such
as alternators, enclosures, control systems and com-
UL2200, UL6200, UL1236, UL489 munications software. Generac also makes its own
spark-ignited engines, and they can be found on every
Generac gaseous-fueled generator. We engineer and
CSA C22.2
manufacture them from the block up — all at our facili-
TM
ties throughout Wisconsin. Applying natural gas and LP-
BS5514 and DIN 6271 fueled engines to generators requires advanced engi-
neering expertise to ensure reliability, durability and nec-
SAE J1349 essary performance. By designing specifically for these
®
dry, hotter-burning fuels, the engines last longer and re-
NFPA 37, 70, 99, 110 quire less maintenance. Building our own engines also
means we control every step of the supply chain and
NEC700, 701, 702, 708 delivery process, so you benefit from single-source
responsibility.
NEMA ICS10, MG1, 250, ICS6,
AB1
Plus, Generac Industrial Power’s distribution network
provides all parts and service so owners don’t have to
SPEC SHEET
ANSI C62.41
deal with third-party suppliers. It all leads to a positive
IBC 2009, CBC 2010, IBC 2012, owner experience and higher confidence level. Generac
ASCE 7-05, ASCE 7-10, ICC-ES
spark-ignited engines give more options in commercial
AC-156 (2012)
and industrial generator applications as well as extended
run time from utility-supplied natural gas. 1 of 6
SG275 | 14.2L | 275 kW
INDUSTRIAL SPARK-IGNITED GENERATOR SET
EPA Certified Stationary Emergency and Non-Emergency
STANDARD FEATURES DEMAND RESPONSE READY
ENGINE SYSTEM ELECTRICAL SYSTEM GENERATOR SET
• Oil Drain Extension • Battery Charging Alternator • Internal Genset Vibration Isolation
• Air Cleaner • Battery Cables • Separation of Circuits - High/Low Voltage
• Fan Guard (Open Sets Only) • Battery Tray • Separation of Circuits - Multiple Breakers
• Stainless Steel Flexible Exhaust Connection • Rubber-Booted Engine Electrical Connections • Wrapped Exhaust Piping
• Factory Filled Oil and Coolant • Solenoid Activated Starter Motor • Standard Factory Testing
• Radiator Duct Adapter (Open Set Only) • 2 Year Limited Warranty (Standby and Demand
• Critical Silencer (Enclosed Units Only) ENCLOSURE (If Selected) Response Rated Units)
• Oil Temperature Indication and Alarm • Rust-Proof Fasteners with Nylon Washers to • 1 Year Limited Warranty (Prime Rated Units)
Protect Finish • Silencer Mounted in the Discharge Hood
FUEL SYSTEM • High Performance Sound-Absorbing Material (Enclosed Units Only)
• NPT Fuel Connection on Frame (Sound Attenuated Enclosures) • Ready to Accept Full Load in <10 Seconds
• Primary and Secondary Fuel Shutoff • Gasketed Doors
• Upward Facing Discharge Hood (Radiator and ALTERNATOR SYSTEM
COOLING SYSTEM Exhaust) • UL2200 GENprotect™
• Closed Coolant Recovery System • Stainless Steel Lift Off Door Hinges • Class H Insulation Material
• UV/Ozone Resistant Hoses • Stainless Steel Lockable Handles • 2/3 Pitch
• Factory-Installed Radiator • RhinoCoat™ - Textured Polyester Powder Coat • Skewed Stator
• 50/50 Ethylene Glycol Antifreeze Paint • Permanent Magnet Excitation
• Radiator Drain Extension • Sealed Bearing
• Amortisseur Winding
• Full Load Capacity Alternator
CONTROL SYSTEM • Remote Wireless Software Update Capable 7 Inch Color Touch Screen Display
• BMS and Remote Telemetry • Resistive Color Touch Screen
• Built-In Programmable Logic Eliminates the Need • Sunlight Readable (1400 NITS)
for External Controllers Under Most Conditions • Easily Identifiable Icons
• Ethernet Based Communications Between • Multi-Lingual
Generators • On Screen Editable Parameters
• Programmable I/O Channel Properties • Key Function Monitoring
• Built-In Diagnostics • Three Phase Voltage, Amperage, kW, kVA, and
• Arc Flash Maintenance Mode (When Correctly kVAr
Equipped) • Selectable Line to Line or Line to Neutral
Measurements
Alarms and Warnings • Frequency
• Low Oil Pressure • Engine Speed
Power Zone® Pro Sync Controller • Low Coolant Level • Engine Coolant Temperature
• High/Low Coolant Temperature • Engine Oil Pressure
Program Functions • Sensor Failure • Engine Oil Temperature
• NFPA 110 Level 1 Compliant • Oil Temperature • Battery Voltage
• Engine Protective Functions • Over/Under Speed • Hourmeter
• Alternator Protective Functions • Over/Under Voltage • Warning and Alarm Indication
• Digital Engine Governor Control • Over/Under Frequency • Diagnostics
• Digital Voltage Regulator • Over/Under Current • Maintenance Events/Information
• Multiple Programmable Inputs and Outputs • Over Load
• Remote Display Capability • High/Low Battery Voltage
• Remote Communication via Modbus® RTU, • Battery Charger Current
Modbus TCP/IP, and Ethernet 10/100 • Phase to Phase and Phase to Neutral Short
SPEC SHEET
• Alarm and Event Logging with Real Time Circuits (I2T Algorithm)
Stamping
• Expandable Analog and Digital Inputs and Outputs
2 of 6
SG275 | 14.2L | 275 kW
INDUSTRIAL SPARK-IGNITED GENERATOR SET
EPA Certified Stationary Emergency and Non-Emergency
CONFIGURABLE OPTIONS DEMAND RESPONSE READY
ENGINE SYSTEM GENERATOR SET CONTROL SYSTEM
○ Engine Coolant Heater ○ Demand Response Rating ○ NFPA 110 Level 1 Compliant 21-Light Remote
○ Baseframe Cover/Rodent Guard ○ Extended Factory Testing (3-Phase Only) Annunciator
○ 2 Stage Air Cleaner ○ 12 Position Load Center ○ Remote Relay Assembly (8 or 16)
○ Oil Heater ○ Vapor Recovery Heater ○ Remote E-Stop (Break Glass-Type, Surface
○ Air Filter Restriction Indicator Mount)
○ Radiator Stone Guard (Open Set Only) ENCLOSURE ○ Remote E-Stop (Red Mushroom-Type, Surface
○ Level 1 Fan and Belt Guards ○ Weather Protected Enclosure Mount)
○ Level 1 Sound Attenuated ○ Remote E-Stop (Red Mushroom-Type, Flush
FUEL SYSTEM ○ Level 2 Sound Attenuated Mount)
○ NPT Flexible Fuel Line ○ Level 2 Sound Attenuated with Motorized ○ 10A Engine Run Relay
Dampers ○ Ground Fault Annunciator
○ Level 3 Sound Attenuated (Steel Only) ○ 100 dB Alarm Horn
ELECTRICAL SYSTEM
○ Steel Enclosure ○ Damper Alarm Contacts (with Motorized Dampers
○ 10A UL Listed Battery Charger
○ Aluminum Enclosure Only)
○ Battery Warmer
○ Up to 200 MPH Wind Load Rating (Contact ○ 120V GFCI and 240V Outlets
Factory for Availability)
ALTERNATOR SYSTEM
○ AC/DC Enclosure Lighting Kit WARRANTY (Standby Gensets Only)
○ Alternator Upsizing
○ Enclosure Heaters (with Motorized Dampers Only) ○ 2 Year Extended Limited Warranty
○ Anti-Condensation Heater
○ IBC Seismic Certification ○ 5 Year Limited Warranty
○ Tropical Coating
○ Door Open Alarm Switch ○ 5 Year Extended Limited Warranty
○ 7 Year Extended Limited Warranty
CIRCUIT BREAKER OPTIONS ○ 10 Year Extended Limited Warranty
○ Main Line Circuit Breaker
○ 2nd Main Line Circuit Breaker
○ Shunt Trip and Auxiliary Contact
○ Electronic Trip Breakers
ENGINEERED OPTIONS
ENGINE SYSTEM ALTERNATOR SYSTEM
○ Fluid Containment Pans ○ 3rd Main Line Circuit Breaker
○ 4th Main Line Circuit Breaker
CONTROL SYSTEM
○ Battery Disconnect Switch GENERATOR SET
○ Special Testing
○ Battery Box
SPEC SHEET
3 of 6
SG275 | 14.2L | 275 kW
INDUSTRIAL SPARK-IGNITED GENERATOR SET
EPA Certified Stationary Emergency and Non-Emergency
APPLICATION AND ENGINEERING DATA DEMAND RESPONSE READY
ENGINE SPECIFICATIONS
General Cooling System
Make Generac Cooling System Type Pressurized Closed Recovery
Cylinder # 6 Fan Type Pusher
Type In-line Fan Speed (RPM) 1,894
Displacement - in³ (L) 864.71 (14.2) Fan Diameter - in (mm) 34 (864)
Bore: in (mm) 5.31 (135)
Stroke: in (mm) 6.50 (165)
Fuel System
Compression Ratio 9.5:1
Intake Air Method Turbocharged/Aftercooled
Fuel Type Natural Gas
Number of Main Bearings 7
Carburetor Down Draft
Connecting Rods Steel Alloy
Secondary Fuel Regulator Standard
Cylinder Head Cast Iron GT250, OHV
Fuel Shut Off Solenoid Standard
Cylinder Liners Ductile Iron
Operating Fuel Pressure- in H2O (kPa) 7 - 11 (1.7 - 2.7)
Ignition Electronic
Piston Type Aluminum Alloy
Crankshaft Type Ductile Iron Engine Electrical System
Lifter Type Solid
Intake Valve Material Special Heat-Resistant Steel System Voltage 24 VDC
Exhaust Valve Material High Temperature Steel Alloy Battery Charger Alternator 57.5 A
Hardened Valve Seats High Temperature Steel Alloy Battery Size See Battery Index 0161970SBY
Battery Voltage 24 VDC
Engine Governing Ground Polarity Negative (-)
Governor Electronic
Frequency Regulation (Steady State) ±0.25%
Lubrication System
Oil Pump Gear
Oil Filter Type Full Flow with Cartridge
Engine Oil Capacity: qt (L) 36.2 (34.3)
ALTERNATOR SPECIFICATIONS
Standard Model K0300124Y21 Standard Excitation Permanent Magnet
Poles 4 Bearings Sealed Ball
Field Type Revolving Coupling Direct via Flexible Disc
Insulation Class - Rotor H Prototype Short Circuit Test Yes
Insulation Class - Stator H Voltage Regulator Type Full Digital
Total Harmonic Distortion <5% (3-Phase) Number of Sensed Phases All
Telephone Interference Factor (TIF) <50 Regulation Accuracy (Steady State) ±0.25%
SPEC SHEET
4 of 6
SG275 | 14.2L | 275 kW
INDUSTRIAL SPARK-IGNITED GENERATOR SET
EPA Certified Stationary Emergency and Non-Emergency
OPERATING DATA DEMAND RESPONSE READY
POWER RATINGS - NATURAL GAS
Standby/Demand Response Prime
Three-Phase 120/208 VAC @0.8pf 275 kW/343.8 kVA Amps: 955 248 kW/309.4 kVA Amps: 860
Three-Phase 120/240 VAC @0.8pf 275 kW/343.8 kVA Amps: 828 248 kW/309.4 kVA Amps: 745
Three-Phase 277/480 VAC @0.8pf 275 kW/343.8 kVA Amps: 414 248 kW/309.4 kVA Amps: 373
Three-Phase 346/600 VAC @0.8pf 275 kW/343.8 kVA Amps: 331 248 kW/309.4 kVA Amps: 298
MOTOR STARTING CAPABILITIES (skVA)
skVA vs. Voltage Dip
277/480 VAC 30% 277/480 VAC 30%
K0300124Y21 790 K0300124Y21 609
FUEL CONSUMPTION RATES*
Natural Gas – scfh (m³/hr)
Percent Load Standby/Demand Response Prime
25% 1,080 (30.6) 1,020 (28.9)
50% 1,800 (51.0) 1,620 (45.9)
75% 2,640 (74.8) 2,400 (68.0)
100% 3,240 (91.7) 3,000 (84.9)
*Fuel supply installation must accommodate fuel consumption rates at 100% load.
COOLING
Standby/Demand Response Prime
Air Flow (Fan Air Flow Across Radiator) scfm (m³/min) 15,946 (452) 15,946 (452)
Coolant Flow gpm (Lpm) 90 (340.7) 90 (340.7)
Coolant System Capacity gal (L) 15 (54.9) 15 (54.9)
Maximum Operating Ambient Temperature °F (°C) 122 (50) 122 (50)
Maximum Operating Ambient Temperature (Before Derate) See Bulletin No. 0199270SSD See Bulletin No. 0199270SSD
Maximum Additional Radiator Backpressure in H2O (kPa) 0.5 (0.12) 0.5 (0.12)
COMBUSTION AIR REQUIREMENTS
Standby/Demand Response Prime
Flow at rated power scfm - (m³/min) 514 (14.6) 480 (13.6)
ENGINE EXHAUST
Standby/Demand Prime Standby/Demand Prime
Response Response
Rated Engine Speed RPM 1,800 1,800 Exhaust Flow scfm (m³/min) 1,985 (56) 1,670 (47)
Horsepower at Rated hp 409 369 (Rated Output)
kW** Max. Backpressure inHg (kPa) 0.75 (2.54) 0.75 (2.54)
Piston Speed ft/min 1,950 (594) 1,950 (594) (Post Silencer)
(m/min) Exhaust Temp °F (°C) 1,385 (752) 1,355 (735)
BMEP psi 208 (1,433) 187 (1,292) (Rated Output -
(kPa) Post Silencer)
SPEC SHEET
** See “Emissions Data Sheet” for maximum bHP for EPA and SCAQMD
permitting purposes.
Deration – Operational characteristics consider maximum ambient conditions. Derate factors may apply under atypical site conditions.
Please contact a Generac Power Systems Industrial Dealer for additional details. All performance ratings in accordance with BS5514 and DIN6271 standards.
Standby - See Bulletin 0187500SSB • Demand Response - See Bulletin 10000018250 • Prime - See Bulletin 0187510SSB
5 of 6
SG275 | 14.2L | 275 kW
INDUSTRIAL SPARK-IGNITED GENERATOR SET
EPA Certified Stationary Emergency and Non-Emergency
DIMENSIONS AND WEIGHTS* DEMAND RESPONSE READY
OPEN SET (Includes Exhaust Flex)
L x W x H - in (mm) 136.0 (3,454) x 57.1 (1,450) x 67.9 (1,725)
Weight - lbs (kg) 6,200 - 6,587 (2,812 - 2,987)
WEATHER PROTECTED ENCLOSURE
L x W x H - in (mm) 174.7 (4,437) x 57.5 (1,461) x 77.8 (1,976)
Weight - lbs (kg)
Steel: 7,535 - 7,919 (3,417 - 3,591)
Aluminum: 6,978 - 7,359 (3,165 - 3,337)
LEVEL 1 SOUND ATTENUATED ENCLOSURE
L x W x H - in (mm) 200.2 (5,085) x 57.5 (1,461) x 77.8 (1,976)
Weight - lbs (kg)
Steel 7,770 - 8,273 (3,524 - 3,752)
Aluminum: 7,176 - 7,625 (3,254 - 3,458)
LEVEL 2 SOUND ATTENUATED ENCLOSURE
L x W x H - in (mm) 180.6 (4,587) x 57.5 (1,461) x 111.3 (2,827)
Weight - lbs (kg) Steel: 8,804 - 9,188 (3,993 - 4,167)
Aluminum: 7,423 - 7,870 (3,366 - 3,569)
LEVEL 3 SOUND ATTENUATED ENCLOSURE
L x W x H - in (mm) 207.3 (5,265) x 63.7 (1,618) x 128.9 (3,274)
Weight - lbs (kg) 10,718 - 11,080 (4,861 - 5,025)
* All measurements are approximate and for estimation purposes only.
YOUR FACTORY RECOGNIZED GENERAC INDUSTRIAL DEALER
Specification characteristics may change without notice. Dimensions and weights are for preliminary purposes only. Please consult a Generac Power Systems Industrial Dealer for detailed installation drawings
SPEC SHEET
6 of 6
Generac Power Systems, Inc. | S45 W29290 HWY. 59 | Waukesha, WI 53189 | generac.com Part No. 10000039025
©2024 Generac Power Systems, Inc. All rights reserved. All specifications are subject to change without notice. Rev. C 01/25/2024
