CRUDE PALM OIL PRODUCTION PROCESS PRODUCTS

Type: palm fruit/bench oil pressing PALM OIL MILL PLANT

Processing Material: Palm fruit Palm Oil Mill Machine

Palm Bunch Reception

Processing Capacity: 5-120TPH
Sterilization Station

Threshing Station

Palm Oil Pressing Station

Palm Oil Clarification Station

Crude Oil Storage Tank

Palm Kernel Recovery Station

Nut&Kernel Separation Station

PALM OIL REFINING PLANT

Small Scale Oil Refinery Plant

Palm Oil Refinery

Palm Kernel Oil Refining

Degumming and Deacidification

Decolorizing Section

CrudePalmOilMillingProcess Deodorization Section

PLANTATION
PALMKERNEL
CRUSHINGPLANT
KERNALS NERNEL
DRYNG PRESSING
PALM OIL FRACTIONATION MACHINE
FFD FFBIN
CAGE
+DIGESTING
COMPANYMILLPOWER&STEAM RBDPK Palm Oil Fractionation
SHELLS TEMPLOYEES:DOMESTICPOWER
Olein
PRESSED
PKC РКО
Cooling and Crystallization
CAKE|
PRESSING- COGENERATION
DEPERICAFING FIBRES SHELLS REFINERY
STRIPPED RBDPK
-BUNCHES CLARIFICATION
SETTLING Stearin

CLEAR
Palm Oil Filtration
PURIFICATION
DRYING

SLUDGE
RBDOlein PALM KERNEL OIL PRESS PLANT
CRUDE
FERTILSER PALM
00
STORAGE REFINERY
RBDStearin Palm Kernel Oil Pressing Machine
CENTRIFUGING
EFFLUENTTREATMENT CRUDE PALM OIL MILL

Crude Palm Oil Production Process

Palm Tree Production

Palm Oil

CONTACT US

Tel: +86-027-8790 7188

Cell Phone: +86 15623270960
Skype: jacky.jkx
Crude Palm Oil Mill Process Introduction: E-mail: [email protected]

1.Weighing.Palm fruit into the factory after truck weighing,ease of production costing and after the settlement.
2.Loading ramp.FFB after a ramp sieved to remove impurities into the transport machinery delivery to sterilization tank.
3.Sterilization.The use of high temperatures to cook soft fruit bunches and sterilization (145 ℃ ,90-120 minutes), easy to separate fruit bunches fruit,
soft fruit, increasing the humidity of the fruit.
4.Threshing.FFB has softened in sterilization process.After machine and screening beating off the fruit,palm fruit and empty fruit bunches (EFB)
separation.
5.Empty fruit bunches.After delivery hoarding,EFB shipped orchard as fertilizer or fuel,it can also be used for other purposes.
6.Crushing.Fruit is broken through mash tank mixing and extrusion.
7.Pressing.The crushed fruit screw extrusion leaching by the press.
8.Separate the nut and fiber.Mostly of the fiber should be separated by pneumatic fiber depericarper System. The nut, little fiber and big impurity will
be further separated by the polishing drum. The separated nut should be sent to nut hopper through the pneumatic nut transport system
9.Shell and nut.Adopt the ripple mill to crack the nut, after cracking , most of the shell and kernel will be separated by cracked mixture separating
system, and the rest of mixture of kernel & shell enter to the special clay bath separating system to separate them, after this processing , we could get
pure kernel(The shell content in kernel <6%),which should be conveyed to the kernel silo to dry.After dried moisture as 7%, the kernel will be conveyed
to kernel storage bin for storage; Usually the dry kernel’s capacity ratio is 4% . So it should be collected until enough quantity, and then be sent to the
palm kernel oil mill; For the separated shell, it should be conveyed to shell temporary bin as the spare boiler fuel.
:
10.Oil clarification.After screen and sand trap tank, the palm oil should be sent to crude oil tank and heat , then be pumped continuous clarification
tank to separate the purified oil which be sent to pure oil tank and the sludge oil which be sent to sludge tank .
11.oil transportation.According to the actual situation,make crude palm oil pipeline.
12.Water Treatment.Generally introduced from a nearby river,water throught settling, filtration, dosing and other processes to ensure that the water
quality, but also to ensure oil quality.
13.Power system.Power is use of steam power generation turbine generator and also equipped with diesel generators.

Crude palm oil standard:

FFA :≦ 5 %
Moisture :≦0.1 %
Dirt:≦0.02 %

← PALM KERNEL OIL PRESSING MACHINE PALM TREE PRODUCTION →

Leave a Reply
Your email address will not be published. Required fields are marked *

Comment *

Name *

Email *

Tel

Post Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.

China Cereals And Oils Machinery Tel: +86-027-8790 7188, E-mail: [email protected]
: