Scribd
Upload
15 views1 page

Assignment Flat Slab

The assignment for Year 3 Civil Engineering students at the University of Rwanda involves designing a reinforced concrete flat slab for an office building. Students are required to consider bending, shear, and deflection in their design, using specified material strengths and dimensions. The submission deadline is set for March 17, 2025.

Uploaded by

hlouismariedemontfort
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
15 views1 page

Assignment Flat Slab

The assignment for Year 3 Civil Engineering students at the University of Rwanda involves designing a reinforced concrete flat slab for an office building. Students are required to consider bending, shear, and deflection in their design, using specified material strengths and dimensions. The submission deadline is set for March 17, 2025.

Uploaded by

hlouismariedemontfort
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

CLASS YEAR 3 CIVIL ENGINEERING

Date: 11th /03/2025


UNIVERSITY OF RWANDA
Submission: Monday, 17TH MARCH.
COLLEGE OF SCIENCE AND TECHNOLOGY
School of Engineering
ASSIGNMENT_3.2 - DESIGN OF REINFORCED CONCRETE STRUCTURES II

Groups of not more than 10 students.

Annexes, refer in the reference book. ‘Reinforced concrete design to Eurocode 2 , by Bill Mosley, et al. , Seventh
edition’

The floor system of an office building is to be designed as a flat slab. The columns are spaced
at 5m and 6m North-South and in East-West directions respectively. The slab supports a
variable load of 5 kN/m2. The characteristic material strengths are fck = 25 N/mm2 for the
concrete, and fyk = 500 N/mm2 for the reinforcement. The slab thickness is 270mm and is
supported by columns with square column heads 1.5m wide. The floor system has 4 spans
in each direction.

a. Design the reinforced concrete flat slab for bending. Consider interior panels.

b. Check the slab for shear.

c. Check the slab for deflection.

End

You might also like