datasheet
1065 16-INPUT/4-OUTPUT CARD
Key Features
• 16 supervised alarm inputs
(4-state, dual end-of-line)
• Four outputs ( 2 x relay
controlled, 2 x open-
emitter)
• Two on-board expansion
ports (for Pacom I/O
expansion cards)
• 12VDC power input
• Tamper input
• Configurable end-of-line
input resistance for restrofit
applications
Pacom input/output hardware - remote expansion.
The Pacom 1065-IO is used to modularly expand the alarm The input/output capacity of the 1065-IO can be locally
input and output points to any Pacom Controller. The expanded by accommodating up to two Pacom [Controller]
Pacom 1076-IO communicates via RS485 multi-drop port 1050R-003 8-output/1050R-004 16-input/1057R-203-UL
to Controllers. RS485 star coupler expansion cards.
In standard configuration the Pacom 1065-IO provides The 1065-IO is suitable for mounting in Pacom enclosures
connection for 16 supervised alarm inputs and four - ENCL-L-STD/1010-01PD (up to 2 per enclosure),
outputs. The inputs support analog data and can be used PDENCL-01 (up to 2 per enclosure).
to facilitate remote diagnostics on end devices from Pacom
security management software.
Architecture
Inputs from
Pacom detectors,
Controller buttons etc
RS485
1065 I/O
Card
Outputs to
sirens,
lights etc
Product Overview
Technical Specifications
Dimensions 172 x 118mm (6.8 x 4.6”)
Weight 175g (6.2oz)
Status Indicator 5 x LED (Tx, Rx, power, output 1 active, output 2 active)
Operating Environment EU: -10 to +50°C (14 to 122°F)
UL: 0 to +50°C (32 to 122°F)
85% maximum humidity (non-condensing) @ 30°C (86°F)
Power Input 12-15VDC (can be supplied through attached Controller or external power
supply)
Power Consumption 110mA @ 12VDC typical, excluding attached devices. 135mA maximum
with all alarm conditions present and all outputs active etc
Connectivity RS485 (two wire)
Inputs 16 x supervised (10kOhm EOL resistance standard. Can accept resistance
between 3.3kOhm and 25.4kOhm)
Note: All supervised inputs can be configured as analog inputs
Outputs 2 x relay controlled (1.0A @ 30VDC contacts when powered from external
power supply)
2 x open emitter, transistor controlled (200mA @ 12VDC when powered
by Controller)
Expansion Card Connection 2 x 24-pin (suitable for 1050R-003-UL and 1050R-004-UL expansion
cards)
Compliance/Accreditation
A-Tick FCC Part 15
C-Tick, CE Safety RoHS, RoHS 7C3
EN50130-4+A1, EN50130-5, EN50131-1, EN50131-3
Order Information
Part Number Type Code Description
300 072 011 1065R-001-UL 1065-IO 16-input/4-output expansion card (PCB only)
400 050 041 1065-ENC-PSU 1065-IO 16-input/4-output expansion card with PDENCL-01 enclosure including wall tear-off and
lid open tamper contacts and PD8303R-01 power supply
1065-IO-DS-EN-V1_0 |2
Specifications subject to change without notice. Copyright © Pacom Systems
