Flywheel Horsepower

Gross: 194 kW 260 HP / 1950 min-1

Net: 187 kW 250 HP / 1950 min-1
operating weight
PC300-8M0: 33400– 33900kg
PC300LC-8M0: 34200– 34700kg

PC300-8M0
PC350LC-8M0: 35800– 36600kg

PC300LC-8M0
PC350LC-8M0
PC
Australian - NZ Specification 300 350

HYDRAULIC EXCAVATOR

Photos may include optional equipment.

 PC300-8M0 PC300-8M0
PC350LC-8M0 H y draul i c E x c avat or hydraulic excavator PC350LC-8M0

WALK-AROUND
Productivity Features Information & Easy Maintenance
Communication Technology • Long replacement interval of engine oil, engine oil filter,
• High Production and
Low Fuel Consumption • Large multi-lingual high resolution hydraulic oil and hydraulic filter.
High power, working performance LCD monitor • Equipped with fuel pre-filter as standard (with water separator)
and fuel efficiency improve • Supports efficiency improvement • Side-by-side radiator and oil cooler configuration enables
production and fuel costs • Equipped with the EMMS independent removal and installation of those two components.
monitoring system • Equipped with the EMMS monitoring system
• Large Drawbar Pull See page 8 • Easy access to engine oil filter and fuel drain valve
Provides superb steering and slope
climbing performance. • Large fuel tank capacity
See page 9
• Large Digging Force
Pressing the Power Max function
button temporarily increases the Komatsu Australia Ltd Standard Specification
digging force 7% (KALSS)
• Unique specification developed specifically for the Australian
• Two-mode Setting for Boom and New Zealand market
Switch selection allows either
powerful digging or smooth boom • Factory designed and fitted to support local requirements and
operation reduce delivery lead times
See pages 4 and 5 • Enables compliance to local legislation and site safety standards
See page 10

Ecology and Economy Features Safety Design

• A powerful turbocharged and air to • ROPS cab (ISO 12117-2) for
air aftercooled Komatsu SAA6D114E-3 protecting the operator in the
engine provides 187 kW 250 HP. This event of a roll-over
engine is EPA Tier 3 and EU Stage 3A • Slip-resistant plates for improved
emissions equivalent, without sacrificing foot grip
power or machine productivity
• Rear view monitoring system for
• Economy mode saves fuel consumption viewing the work area to the rear
• Low operation noise of the machine
See pages 4 and 5 See page 7

Large Comfortable Cab

• Low-noise cab
• Low vibration with cab damper mounting
• Highly pressurized cab
• Operator seat and console with armrest
that enables operations in the appropriate
operational posture Photo may include optional equipment
See page 6

2 3
 PC300-8M0 PC300-8M0
PC350LC-8M0 H y draul i c E x c avat or hydraulic excavator PC350LC-8M0

PRODUCTIVITY & ECOLOGY FEATURES

Komatsu Technology Idling Caution Larger Maximum
To prevent unnecessary Drawbar Pull
fuel consumption, an idling Larger maximum drawbar pull
caution is displayed on the provides superb steering and
monitor, if the engine idles slope climbing performance.
for 5 minutes or more. Maximum drawbar pull:
264 kN 26900 kg

Working Modes Selectable

This excavator is equipped with six working modes (P, E, L, B, ATT/P
and ATT/E mode). Each mode is designed to match engine speed and
Large Digging Force
pump output to the application.
This provides the flexibility to With the one-touch Power Max. function digging force has been
match equipment performance further increased. (8.5 seconds of operation)
Komatsu develops and produces all major
components, such as engines, electronics and to the job at hand. Maximum arm crowd force (ISO):
hydraulic components, in house. 160 kN (16.3t) 171 kN (17.4t) 7% UP
(with Power Max.)
With this “Komatsu Technology,” and adding
Maximum bucket digging force (ISO):
customer feedback, Komatsu is achieving great
advancements in technology.
213 kN (21.7t) 228 kN (23.2t) 7% UP
(with Power Max.)
To achieve both high levels of productivity and Working Mode Application Advantage
*Measured with Power Max function, 3185 mm arm and ISO rating
economical performance, Komatsu has developed the • Maximum production/power
P
P Power mode
• Fast cycle times Smooth Loading Operation
main components with a total control system. Return hoses
The result is a new generation of high performance EE Economy mode • Good cycle times Two return hoses improve hydraulic
• Better fuel economy
and environment-friendly excavators. performance. In the arm out function,
• Suitable attachment speed a portion of the oil is returned directly
Lifting mode • Lifting capacity is increased
LL
Low Emission Engine Low Fuel Consumption 7% by raising hydraulic to the tank providing smooth operation.
pressure.
Komatsu SAA6D114E-3 reduced NOx emission by 33­% compared The newly-developed Komatsu SAA6D114E-3 engine enables NOx
• Optimum engine rpm,
BB Breaker mode
with the PC300-7. This engine is EPA Tier 3 and EU Stage 3A emissions to be significantly reduced with the accurate multi- hydraulic flow Two-mode Setting for Boom
emissions equivalent. staged fuel injection by the engine controller. It improves total
• Optimum engine rpm, hydraulic Smooth mode provides easy operation for gathering blasted rock or
Attachment
engine durability using the high-pressure fuel injection system ATT/P
flow, 2way
Power mode
scraping down operation. When maximum digging force is needed,
developed specifically for construction machinery. This excavator • Power mode
switch to Power mode for more effective excavating.
significantly reduces hourly fuel consumption using the highly- • Optimum engine rpm,
Attachment
ATT/E hydraulic flow, 2way
efficient matching techniques of the engine and hydraulic unit and Economy mode
• Economy mode
also provides features that promote energy-saving operations such Smooth mode Power mode

as the E mode and ECO-gauge.

Eco-gauge that Assists Energy-saving Operations
Equipped with the Eco-gauge that can be recognized at a glance 350
350

Fuel consumption 3% reduced on the right of the multi-function color monitor for environment-
vs. PC300/LC-8 & PC350LC-8 friendly energy-saving
Boom floats upward, reducing Boom pushing force is increased,
Based on typical work pattern collected via KOMTRAX. operations. Allows focus lifting of machine front. This ditch digging and box digging
Low Operation Noise Fuel consumption varies depending on job conditions.
on operation in the green facilitates gathering blasted rock operation on hard ground are
and scraping down operations. improved.
Enables a low noise operation using the low-noise engine and range with reduced CO2
methods to cut noise at source. emissions and efficient
fuel consumption.

4 5
 PC300-8M0 PC300-8M0
PC350LC-8M0 H y draul i c E x c avat or hydraulic excavator PC350LC-8M0

WORKING ENVIRONMENT
Safety Features
ROPS Cab Lock Lever
The machine is equipped with a ROPS cab that conforms to ISO Locks the hydraulic
12117-2 for excavators as standard equipment. The ROPS cab has pressure to prevent
high shock-absorption performance, featuring excellent durability unintentional
and impact strength. It also satisfies the requirements of ISO OPG movement. Neutral
top guard level 1 for falling objects. Combined with the retractable start function allows
seat belt, The ROPS cab protects the operator in case of tipping machine to be started
over and against falling objects. only in lock position.

Large Side-view, and Sidewise Mirrors

Enlarged left-side mirror and addition of sidewise allow the
PC300/LC-8M0 & PC350LC-8M0 to meet the new ISO visibility
requirements.

Low Cab Noise Wide Newly-designed Cab Automatic Air Conditioner

The newly-designed cab is highly rigid and Newly-designed wide spacious cab Enables you
to easily and
Rear View Monitoring System
has excellent sound absorption ability. includes seat with reclining backrest.
precisely The operator can view the rear of the machine with a color
Thorough improvement of noise source The seat height and longitudinal inclination
set cab monitor screen.
reduction and use of low noise engine, are easily adjusted using a pull-up lever.
hydraulic equipment, and air conditioner You can set the appropriate operational atmosphere
allows this machine to generate a low posture of armrest together with with the
level of noise. the console. instruments on the large LCD.
Reclining the seat further enables you The bi-level control function keeps the
Low Vibration with Cab Damper to place it into the fully flat state with operator's head and feet cool and warm
Mounting the headrest attached. respectively. This improved air flow
PC300/LC-8M0 & PC350LC-8M0 uses function keeps the inside of the cab Rear view image on monitor
viscous damper mounting for cab that comfortable throughout the year.
Defroster function keeps front glass clear.
Thermal and Fan Guards
incorporates longer stroke and the
addition of a spring. The new cab damper Thermal and fan guards are placed around high-temperature parts
Slip-resistant
mounting combined with high rigidity deck of the engine and fan drive.
Plates
aids vibration reduction at operator seat.
Highly durable slip-
resistant plates
maintain superior
Pressurized Cab traction performance
rubber
spring for the long term.
Optional air conditioner, air filter and a
silicon
oil higher internal air pressure (+6.0 mm Aq) Pump/engine Room Partition
prevent external dust from entering
Pump/engine room partition prevents oil from spraying onto the
the cab.
engine if a hydraulic hose should burst.

6 7
 PC300-8M0 PC300-8M0
PC350LC-8M0 H y draul i c E x c avat or hydraulic excavator PC350LC-8M0

INFORMATION & COMMUNICATION TECHNOLOGY MAINTENANCE FEATURES

Large Multi-lingual High Resolution Easy Radiator Cleaning Easy Access to Engine Oil Filter Equipped with the
LCD Monitor Since radiator and oil cooler are arranged and Fuel Drain Valve Fuel Pre-filter
side-by-side, it is easy to clean, remove Engine oil level gauge, and fuel filter are (with Water Separator)
1 2 3 A large user-friendly high resolution LCD color
monitor enables safe, accurate and smooth and install them. one side mounted to improve accessibility. Removes water and
7
work. Visibility and resolution are further Engine oil filter and fuel drain valve are contaminants in the fuel
improved compared with current 7-inch large remotely mounted to improve accessibility. to prevent fuel problems.
4 5 6
TFT LCD.
Simple and easy to operate switches. Function Long-life Oil, Filter
8
keys facilitate multi-function operations. Uses high-performance filtering materials
Displays data in 13 languages to globally and long-life oil. Extends the oil and filter
9
support operators around the world. replacement interval.
TFT : Thin Film Transistor Engine oil &
LCD : Liquid Crystal Display Equipped with the Eco-drain Engine oil filter every 500 hours
Valve as Standard Hydraulic oil every 5000 hours
1 2 3
Indicators Prevents clothes and the ground from Hydraulic oil filter every 1000 hours
Function
1 5
Basic
switches becoming contaminated due to oil leakage
4 5 6 2 6
operation 3 7 when replacing the engine oil.
switches Large Fuel Tank Capacity
4 8
9
High-capacity Air Cleaner Large fuel tank capacity extends operating
Air conditioner hours before refueling. Fuel tank is treated
Basic operation switches High capacity air cleaner is comparable to
operation for rust prevention.
switches 1 4 that of larger machines. The larger air
2 5
cleaner can extend air cleaner life during Engine Oil Filter Fuel Drain Valve
3 6
long-term operation and prevents early
clogging and
Supports Efficiency Improvement Equipment Management Monitoring System resulting power
(EMMS) decrease.
The main screen displays advices for promoting energy-saving
Monitor Function Reliability is
operations as needed. The operator can use the ECO Guidance
improved by a
menu to check the Operation Records, ECO Guidance Records, Controller monitors engine oil
new seal design.
Average Fuel Consumption Logs, etc. level, coolant temperature,
battery charge air clogging,
etc. If the controller finds any
abnormality, it is displayed on
the LCD.

Maintenance Function
The monitor informs
replacement time of oil and
filters on the LCD when the
replacement interval is reached.

Trouble Data Memory

Function
Monitor stores abnormalities
for effective troubleshooting.

8 Photo may include optional equipment 9

 PC300-8M0 PC300-8M0
PC350LC-8M0 H y draul i c E x c avat or hydraulic excavator PC350LC-8M0

kalss australian Standard Specification

Level Indicator Additional Mirrors OPG Level 2 Top Guard
Overload Alarm and Lighting (ISO 10262)
Boom and Arm Anti-Burst Valves For improved visibility For falling object protection. engine swing system
Enable compliance when lifting and illumination Rotating Amber Beacon Model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Komatsu SAA6D114E-3 Drive method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydrostatic
suspended loads. Fitted with factory guard. Type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Water-cooled, 4-cycle, direct injection Swing reduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Planetary gear
Aspiration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Turbocharged, aftercooled Swing circle lubrication. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Grease-bathed
Number of cylinders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Service brake. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic lock
Bore. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114 mm Holding brake/Swing lock. . . . . . . . . . . . . . . . . . . . . . . . . . Mechanical disc brake
Stroke. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 mm Swing speed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.5 min-1
Rock Guard Piston displacement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.27 L
Reinforced steel plate and Horsepower:
ribs to provide additional SAE J1995 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Gross 194 kW 260 HP
Undercarriage
protection of arm structure. ISO 9249 / SAE J1349. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Net 187 kW 250 HP
Rated rpm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1950 min-1 Center frame. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . X-frame
Fan drive method for radiator cooling. . . . . . . . . . . . . . . . . . . . . . . . . . Mechanical Track frame. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Box-section
Governor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . All-speed control, electronic Seal of track. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Sealed track
Track adjuster. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic
Factory Fitted Handrails EPA Tier 3 and EU Stage 3A emissions equivalent. Number of shoes (each side):
To improve machine access PC300-8M0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
and reduce fall hazards. PC300LC-8M0 / PC350LC-8M0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Hydraulics Number of carrier rollers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 each side
Heavy-Duty
Number of track rollers (each side):
Boom and Arm Type. . . . . . . . . HydrauMind (Hydraulic Mechanical Intelligence New Design) PC300-8M0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
With continuous High Capacity
system, closed-centre system with load sensing valves and PC300LC-8M0 / PC350LC-8M0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
plates and cast Air Conditioner pressure compensated valves
tips to provide With increased Number of selectable working modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Coolant and Lubricant
increased cool down Main pump:
performance. Type. . . . . . . . . . . . . . . . . . . . . . . . . . . . Two variable displacement piston type Capacity (refilling)
durability and
reliability. Pumps for. . . . . . . . . . . . . . . . . Boom, arm, bucket, swing, and travel circuits Fuel tank. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 605 L
Maximum flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 535 L / min Coolant. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31.0 L
Supply for control circuit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Self-reducing valve Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37.0 L
Factory Fitted Quick Hitch Hydraulic motors: Final drive, each side. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.0 L
and Hammer Piping Travel . . . . . . . . . . . . . . . . . . . . . . . . . 2 x axial piston motor with parking brake
Photo may include Swing drive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16.5 L
Enable use with a greater Track Frame and Revolving Swing. . . . . . . . . . . . . . . . . . . 1 x axial piston motor with swing holding brake
optional equipment Hydraulic tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188 L
variety of attachments. Frame Under Cover Relief valve setting:
Prevents ingress of material into Implement circuits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37.3 MPa 380 kg/cm2
slew ring area and engine bay. Travel circuit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37.3 MPa 380 kg/cm2
Swing circuit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27.9 MPa 285 kg/cm2 operating weight (approximate)
Bump Rails
Pilot circuit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.2 MPa 33 kg/cm2
For upper structure Operating weight including 6470 mm one-piece boom, 3185 mm arm, 600 mm
Lower Windscreen Guard Hydraulic cylinders:
E-Stops protection when slewing. shoes, rated capacity of lubricants, coolant, full fuel tank, operator, standard
(Number of cylinders – bore x stroke x rod diameter)
Protects cabin windscreen Allow compliance to site equipment, KGA quick hitch and 1500mm KGA bucket (PC300-8M0,
Battery Isolation Boom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 –140 mm x 1480 mm x 100 mm
against rocks and debris. safety requirements with PC300LC-M0) or 1700 mm KGA bucket (PC350LC-8M0).
Single pole, lockable Bosch-type Arm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 –160 mm x 1825 mm x 110 mm
standard factory wiring for battery isolation. Bucket for 3.185 m & 4.02 m arm. . . . . . . . . . 1 –140 mm x 1285 mm x 100 mm
trouble free operation. Bucket for 2.55 m arm. . . . . . . . . . . . . . . . . . . 1 –150 mm x 1285 mm x 110 mm PC300-8M0 PC300LC-8M0 PC350LC-8M0
Operating Ground Operating Ground Operating Ground
Weight Pressure Weight Pressure Weight Pressure
Drives and brakes 33800 kg 0.7kg/cm2 34600 kg 0.66 kg/cm2 36300 kg 0.69 kg/cm2
Steering control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Two levers with pedals
Drive method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydrostatic
Maximum drawbar pull . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 264 kN 26900 kg Rated capacity
Gradeability. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70%, 35°
Maximum travel speed: High. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 km/h Rated capacity when fitted with 6470 mm boom, 3185 mm arm,
Heavy Duty Wide Undercarriage Design (Auto-Shift) Mid. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.5 km/h 600 mm shoes and lifting suspended loads with KGA quick hitch
(Auto-Shift) Low. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.2 km/h (as per Australian standards).
PC350LC-8M0 Only
Service brake. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic lock PC300-8M0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3150 kg
• Extra heavy duty track frame provides durability in heavy construction and Parking brake. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mechanical disc brake PC300LC-8M0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3200 kg
quarry conditions as well as low centre of gravity and wider track gauge PC350LC-8M0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3650 kg
for greater stability.
• Full length track roller guards provide complete protection of track rollers
against rock and debris damage.
• Lift capacity is increased by 12% over the PC300LC-8M0.
• Centre frame ground clearance is increased to 644mm.
• Gauge width increased to 3310mm.

Specification also includes factory fitted provisions for fire extinguishers, turbo timer, UHF and vandal covers to enable ease and reduce cost of local fitment.
10 11
 PC300-8M0 PC300-8M0
PC350LC-8M0 H y draul i c E x c avat or hydraulic excavator PC350LC-8M0

dimensions working range

Arm Length 3185 mm Model PC300/LC-8M0 PC350LC-8M0

Model PC300-8M0 PC300LC-8M0 PC350LC-8M0 A Max. digging height 10100 mm 10100 mm
A Overall length 11150 mm 11150 mm 11140 mm B Max. dumping height 7050 mm 7050 mm
B Length on ground 5755 mm 5930 mm 5930 mm C Max. digging depth 7380 mm 7380 mm
C Overall height (to top of boom)* 3285 mm 3285 mm 3285 mm D Max. vertical wall digging depth 6400 mm 6400 mm
D Overall width 3190 mm 3190 mm 3310 mm E Max. digging depth of cut for 8' level 7180 mm 7180 mm
E Overall height (to top of cab)* 3145 mm 3145 mm 3190 mm F Max. digging reach 11100 mm 11100 mm
F Ground clearance, counterweight 1185 mm 1185 mm 1230 mm G Max. digging reach at ground level 10920 mm 10920 mm
G Ground clearance (minimum) 500 mm 500 mm 644 mm H Max. swing radius 4430 mm 4430 mm
H Tail swing radius 3450 mm 3450 mm 3450 mm 200 kN 200 kN
Bucket digging force at power max

SAE Rating
20400 kg 20400 kg
I Track length on ground 3700 mm 4030 mm 4030 mm
165 kN 165 kN
J Track length 4625 mm 4955 mm 4955 mm Arm crowd force at power max
16800 kg 16800 kg
K Track gauge 2590 mm 2590 mm 2710 mm
228 kN 228 kN
Bucket digging force at power max

ISO Rating
L Width of crawler 3190 mm 3190 mm 3310 mm 23200 kg 23200 kg
M Shoe width 600 mm 600 mm 600 mm 171 kN 171 kN
Arm crowd force at power max
17400 kg 17400 kg
N Grouser height 36 mm 36 mm 36 mm
O Machine cab height 2585 mm 2585 mm 2630 mm Working range data applicable for machines when fitted with 3185 mm arm and 1.4m3 SAE heaped factory bucket.

P Machine cab width ** 3090 mm 3090 mm 3090 mm

Q Distance, swing centre to rear end 3405 mm 3405 mm 3405 mm
* : Including grouser height
** : Including handrail

350

350

2.44

12 13
 PC300-8M0 PC300-8M0
PC350LC-8M0 H y draul i c E x c avat or hydraulic excavator PC350LC-8M0

lifting capacity with lifting mode standard equipment

A: Reach from swing center Engine: guards and covers:

B: Bucket hook height
• ● Additional filter system for poor-quality fuel (water seperator) • ● Bump rails
C: Lifting capacity • Air pre-cleaner • Engine side covers, perforated
Cf: Rating over front • Automatic engine warm-up system • Fan guard structure
350
Cs: Rating over side • ● Dry type air cleaner, double element • Revolving frame under cover
: Rating at maximum reach • ● Engine, Komatsu SAA6D114E-3
• ● Engine overheat prevention system UNDERCARRIAGE:
• Large capacity fuel pre-filter • ● 600 mm triple grouser shoes
• ● Radiator and oil cooler dust proof net •  Hydraulic track adjusters (each side)
• Side by side coolers • Track frame undercover
PC300-8M0 Boom: 6470 mm Arm: 3185 mm Shoes: 600 mm triple grouser Bucket: 1.4 m3 SAE heaped (1015 kg) • ● Suction cooling fan • Track guiding guard, centre section:
A MAX 9.1 m 7.6 m 6.1 m 4.6 m 3m - PC300-8M0 & PC300LC-8M0
Electrical system: • ● Track roller guards (full length):
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs • Auto-decel - PC350LC-8M0
6.1 m *5250 kg 4400 kg *7150 kg 5700 kg • Alternator, 24V / 60A • ●  Track roller:
• Batteries, 2 X 12 V / 120Ah - PC300-8M0, 7 each side
4.6 m *5400 kg 3750 kg 5700 kg 3850 kg *7600 kg 5500 kg *9000 kg 8150 kg • Battery isolation, single pole lockable - PC300LC-8M0, 8 each side
3.0 m 5150 kg 3450 kg 5550 kg 3750 kg 7650 kg 5200 kg *10250 kg 7600 kg *14250 kg 12050 kg • Emergency stops x 3 - PC350LC-8M0, 8 each side
• Starting motor, 24V / 11kW
1.5 m 5000 kg 3300 kg 5400 kg 3600 kg 7300 kg 4950 kg 10550 kg 7100 kg *16550 kg 10950 kg • Voltage reducer 24V to 12V, with socket OPERATOR ENVIRONMENT:
0m 5100 kg 3350 kg 5300 kg 3500 kg 7100 kg 4700 kg 10150 kg 6700 kg 16300 kg 10400 kg • ● Working lights • AM / FM radio
1 x boom • Bolt-on top guard
-1.5 m 5450 kg 3600 kg 5250 kg 3450 kg 6950 kg 4600 kg 9900 kg 6550 kg 16100 kg 10250 kg *9800 kg *9800 kg 1 x RH [Operator Protective Guard level 2 (OPG)]
-3.0 m 6350 kg 4200 kg 7000 kg 4600 kg 9900 kg 6500 kg *15050 kg 10350 kg *18100 kg *18100 kg 3 x cab • Half height cab front guard
1 x counterweight • EMMS monitoring system
-4.5 m *7400 kg 5500 kg *9300 kg 6700 kg *12350 kg 10650 kg *16000 kg *16000 kg • Large capacity automatic air conditioner
-6.1 m *7450 kg *7450 kg HYDRAULIC SYSTEM: • ●  Multi-function color monitor
• ● Arm holding valve • ●  Rear view mirror (RH, LH, sidewise)
• Boom holding valve •  ROPS cab (ISO 12117-2 and OPG Level 1) with vandal cover provision
PC300LC-8M0 Boom: 6470 mm Arm: 3185 mm Shoes: 600 mm triple grouser Bucket: 1.4 m3 SAE heaped (1015 kg) • Boom and arm burst valve protection • Rotating beacon with guard
• ● Dual flow hammer piping • Seat belt, retractable
A MAX 9.1 m 7.6 m 6.1 m 4.6 m 3m • Full flow in-line filter •  Seat, suspension
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs • "HydrauMind" closed centre load sensing system
• Overload alarm OTHER EQUIPMENT:
6.1 m *5250 kg 4450 kg *7150 kg 5800 kg • ● Power maximizing system • ● Counterweight
4.6 m *5400 kg 3850 kg 6500 kg 3950 kg *7600 kg 5600 kg *9000 kg 8250 kg • ● PPC hydraulic control system • ● Electric horn
• Quick hitch piping with safety switch and alarm • Handrails, full deck with kick plate
3.0 m *5700 kg 3500 kg 6350 kg 3800 kg *8400 kg 5300 kg *10250 kg 7700 kg *14250 kg 12200 kg • ● Two-mode settings for boom • Level indicator
1.5 m 5700 kg 3350 kg 6200 kg 3650 kg 8350 kg 5050 kg *11550 kg 7200 kg *16550 kg 11150 kg • ● Working mode selection system • Rear reflector
• ● Travel alarm
0m 5850 kg 3400 kg 6050 kg 3550 kg 8150 kg 4800 kg 11650 kg 6850 kg *17000 kg 10600 kg • Slip-resistant plates
-1.5 m 6300 kg 3650 kg 6000 kg 3500 kg 8000 kg 4700 kg 11450 kg 6650 kg *16550 kg 10450 kg *9800 kg *9800 kg
-3.0 m 7250 kg 4250 kg 8000 kg 4700 kg *11300 kg 6650 kg *15050 kg 10550 kg *18100 kg *18100 kg
-4.5 m *7400 kg 5600 kg *9300 kg 6800 kg *12350 kg 10850 kg *16000 kg *16000 kg
-6.1 m *7450 kg *7450 kg optional FACTORY equipment

UNDERCARRIAGE: OPERATOR ENVIRONMENT:

PC350LC-8M0 Boom: 6470 mm Arm: 3185 mm Shoes: 600 mm triple grouser Bucket: 1.4 m3 SAE heaped (1015 kg)
• ● 700 mm triple grouser shoes ●• Full height cab front guard
A MAX 9.1 m 7.6 m 6.1 m 4.6 m 3m • 800 mm triple grouser shoes [Operator Protective Guard level 2 (OPG)]
B • Track roller guards (full length)
Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
- PC300-8M0 & PC300LC-8M0
6.1 m *5250 kg 4900 kg *7150 kg 6350 kg
WORK EQUIPMENT:
4.6 m *5400 kg 4250 kg *6500 kg 4350 kg *7600 kg 6100 kg *9000 kg 8950 kg
• Arms
3.0 m *5750 kg 3900 kg 6650 kg 4200 kg *8400 kg 5850 kg *10250 kg 8400 kg *14250 kg 13350 kg - 2550 mm arm assembly
- 4020 mm arm assembly
1.5 m 6000 kg 3750 kg 6500 kg 4050 kg 8750 kg 5550 kg *11550 kg 7900 kg *16550 kg 12300 kg
0m 6100 kg 3800 kg 6350 kg 3950 kg 8500 kg 5350 kg 12150 kg 7550 kg *17000 kg 11750 kg
-1.5 m 6600 kg 4100 kg 6300 kg 3900 kg 8350 kg 5200 kg 11950 kg 7350 kg *16500 kg 11600 kg *9800 kg *9800 kg
-3.0 m *7550 kg 4800 kg 8400 kg 5250 kg *11300 kg 7350 kg *15050 kg 11700 kg *18100 kg *18100 kg
-4.5 m *7400 kg 6300 kg *9300 kg 7550 kg *12350 kg 11900 kg *16000 kg *16000 kg
-6.1 m *7450 kg *7450 kg

*Load is limited by hydraulic capacity rather than tipping. Ratings are based on SAE standard No. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.

14 15
www.Komatsu.com Printed in Australia 201411

ZESS003100 Materials and specifications are subject to change without notice.

is a trademark of Komatsu Ltd. Japan.