Company name: MESC
Created by: Amira Elbarbary
Phone:
Date: 03/01/2023
Qty. Description
1 SL1.50.65 .30.2.50D.C
Note! Product picture may differ from actual product
Product No.: On request
Non-self-priming, single-stage, centrifugal pump designed for handling wastewater, process water and unscreened
raw sewage.
The pump is designed for intermittent and continous operations in submerged installation. The revolutionary S-tube®
impeller provides free spherical passage of solids up to 50 mm and is suitable for wastewater with a dry matter
content of up to 3 %. A unique stainless-steel clamp assembling system enables quick and easy disassembly of the
pump from the motor unit for service and inspection. No special tools are required. Pipework connection is via a DIN
flange.
Further product details
The pump is suitable for both temporary and permanent installation either as free-standing on ring stand or on an
auto-coupling system.
Pump
The pump housing, motor top and impeller are made of cast iron (EN-GJL-250).
All surfaces of the cast iron parts are protected with cataphoresis coating.
The surface of the cast iron pump parts is afterwards painted with environmental friendly powder coating (type NCS
9000N (black), gloss code 30, thickness 100 µm) which ensures high impact and corrosion protection.
The final pump is assembled from already painted parts which ensures that no rust or scale can be formed in grooves
between parts, etc.
The S-tube® impeller is providing free spherical passage through the impeller and pump housing and creates a
natural extension of the pipework connected to the pump.
The S-tube® impeller is a wet-balanced and tube-shaped channel impeller placed in a pump housing that matches
the smooth tube shape leaving no obstructions or dead zones.
The key to the S-tube® design is simplicity, with no cutting or moving functions that can get worn over time, thereby
ensuring constant, superior efficiency. The simple design means lower life cycle costs because abrasive wear is
reduced and there are fewer clogging incidents.
Printed from Grundfos Product Centre [2022.55.011] 1/10
Company name: MESC
Created by: Amira Elbarbary
Phone:
Date: 03/01/2023
Qty. Description
1 The shaft seal consists of two mechanical seals that ensure a reliable sealing between the pumped liquid and motor.
The shaft seals are incorporated in a single-unit cartridge shaft seal system that is easy to replace in the field without
use of special tools.
The combination of the primary and secondary seals in a cartridge shaft seal system results in a shorter assembly
length compared to conventional shaft seals.
- Primary seal: Silicon carbide/silicon carbide (SiC/SiC)
- Secondary seal: Carbon/Ceramics
The shaft seal is bidirectional, meaning it operates correctly in case of backflow through the pump.
The pump is approved according to CE EN12050-2.
Motor
The motor is a watertight, totally encapsulated motor supplied with a 10 m power cable. The stainless steel plug is
fastened with a union nut. This nut and the O-rings provide sealing against ingress of the liquid.
The plug is polyurethane-embedded, ensuring a watertight and durable seal around the leads of the cable. This
prevents the ingress of water into the motor through the cable in case of cable breakage or adverse handling in
connection with installation or service.
A compact motor construction with a short shaft reduces vibrations, resulting in an increased efficiency and lifetime of
the shaft seal and ball bearings.
The motor features built-in thermal protection to protect the motor against overheating and ensure the reliability.
The pump is equipped with the following sensor(s):
- A digital moisture switch that is fitted in the motor chamber monitors whether water enters the motor chamber.
If moisture is detected in the motor chamber, the switch will trip and send a warning to the sensor module.
The pump is designed for speed-controlled operation to keep the energy consumption at a minimum.
To avoid the risk of sedimentation in the pipes, we recommend that you operate the speed-controlled pump within a
speed range of 30 % to 100 % and at a flow rate above 1 m/s.
Controls:
Moisture sensor: with moisture sensors
Water-in-oil sensor: without water-in-oil sensor
Liquid:
Liquid temperature range: 283 .. 313 K
Selected liquid temperature: 293 K
Density: 998.2 kg/m³
Technical:
Actual calculated flow: 6.34 l/s
Maximum flow: 19.4 l/s
Resulting head of the pump: 17.86 m
Type of impeller: S-TUBE
Maximum particle size: 50 mm
Primary shaft seal: SIC/SIC
Approvals: CE EN12050-2
Curve tolerance: ISO9906:2012 3B2
Rated speed: 2909 rpm
Materials:
Pump housing: Cast iron
EN 5.1301 EN-GJL-250
Impeller: Cast iron
EN 5.1301 EN-GJL-250
Motor: EN-GJL-250
Printed from Grundfos Product Centre [2022.55.011] 2/10
Company name: MESC
Created by: Amira Elbarbary
Phone:
Date: 03/01/2023
Qty. Description
1 Installation:
Range of ambient temperature: 273 .. 313 K
Maximum operating pressure: 600 kPa
Flange standard: DIN
Type of inlet connection: DIN
Type of outlet connection: DIN
Size of inlet connection: DN 65
Size of outlet connection: DN 65
Pressure rating: PN 10
Maximum installation depth: 20 m
Auto-coupling: 96090992
Frame range: B
Electrical data:
Power input - P1: 3.8 kW
Rated power - P2: 3 kW
Mains frequency: 50 Hz
Rated voltage: 3 x 380-415 V
Voltage tolerance: +10/-10 %
Max starts per. hour: 20
Rated current: 6.4 A
Cos phi - power factor: 0.85
Cos phi - p.f. at 3/4 load: 0.79
Cos phi - p.f. at 1/2 load: 0.67
Rated speed: 2909 rpm
Motor efficiency at full load: 85.6 %
Motor efficiency at 3/4 load: 85.6 %
Motor efficiency at 1/2 load: 84.0 %
Number of poles: 2
Start. method: direct-on-line
Enclosure class (IEC 34-5): IP68
Insulation class (IEC 85): H
Explosion proof: no
Length of power cable: 10 m
Cable type: 07RN8-F
Others:
Net weight: 92.1 kg
Danish VVS No.: 391284183
Finnish LVI No.: 4836143
Printed from Grundfos Product Centre [2022.55.011] 3/10
Company name: MESC
Created by: Amira Elbarbary
Phone:
Date: 03/01/2023
On request SL1.50.65 .30.2.50D.C 50 Hz
H SL1.50.65, 50Hz eta
[m] [%]
24
22
20 100
18 90
16 80
14 70
12 60
10 50
8 40
6 30
4 20
2 10
0 0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 Q [l/s]
Q = 6.34 l/s
H = 17.86 m
Liquid temperature during operation = 293 K
Eta pump = 58 %
Eta pump+motor = 49.3 %
P NPSH
[kW] [m]
3.5 35
P1
3.0 30
P2
2.5 25
2.0 20
1.5 15
1.0 10
0.5 5
0.0 0
P1 = 2.255 kW
P2 = 1.914 kW
NPSH = 2 m
Printed from Grundfos Product Centre [2022.55.011] 4/10
Company name: MESC
Created by: Amira Elbarbary
Phone:
Date: 03/01/2023
H SL1.50.65, 50Hz eta
Description Value [m] [%]
General information: 24
Product name: SL1.50.65 .30.2.50D.C
22
Product No: On request
20 100
EAN number: On request
18 90
Technical:
16 80
Actual calculated flow: 6.34 l/s
14 70
Maximum flow: 19.4 l/s
12 60
Resulting head of the pump: 17.86 m
Maximum head: 22.7 m 10 50
Type of impeller: S-TUBE 8 40
Maximum particle size: 50 mm 6 30
Primary shaft seal: SIC/SIC 4 20
Approvals: CE EN12050-2 2 10
Curve tolerance: ISO9906:2012 3B2 0 0
Cooling jacket: without cooling jacket 0 2 4 6 8 10 12 14 16 18 20 Q [l/s]
Q = 6.34 l/s
Rated speed: 2909 rpm
H = 17.86 m
Materials: Liquid temperature during operation = 293 K
Eta pump = 58 %
Pump housing: Cast iron Eta pump+motor = 49.3 %
Pump housing: EN 5.1301 EN-GJL-250 P NPSH
[kW] [m]
Impeller: Cast iron P1
Impeller: EN 5.1301 EN-GJL-250 3.0 30
2.5 P2 25
Motor: EN-GJL-250
2.0 20
Installation:
1.5 15
Range of ambient temperature: 273 .. 313 K
1.0 10
Maximum operating pressure: 600 kPa
0.5 5
Flange standard: DIN
0.0 0
Type of inlet connection: DIN P1 = 2.255 kW
Type of outlet connection: DIN P2 = 1.914 kW
NPSH = 2 m
Size of inlet connection: DN 65 DN65 4
DN65
18
x
145
M16
x
4
145
366
216
67
641
321
171
Size of outlet connection: DN 65
Pressure rating: PN 10
Maximum installation depth: 20 m 171
Inst dry/wet: SUBMERGED 321
Installation: Vertical
Auto-coupling: 96090992 145
Frame range: B 4 x M16
Liquid:
Liquid temperature range: 283 .. 313 K
641
Selected liquid temperature: 293 K
DN65
Density: 998.2 kg/m³
Electrical data: 67
145
Power input - P1: 3.8 kW 216
366 4 x 18 DN65
Rated power - P2: 3 kW
Mains frequency: 50 Hz
Rated voltage: 3 x 380-415 V
Voltage tolerance: +10/-10 %
Max starts per. hour: 20
Rated current: 6.4 A
Cos phi - power factor: 0.85
Cos phi - p.f. at 3/4 load: 0.79
Cos phi - p.f. at 1/2 load: 0.67
Rated speed: 2909 rpm
Motor efficiency at full load: 85.6 %
Motor efficiency at 3/4 load: 85.6 %
Motor efficiency at 1/2 load: 84.0 %
Number of poles: 2
Start. method: direct-on-line
Enclosure class (IEC 34-5): IP68
Printed from Grundfos Product Centre [2022.55.011] 5/10
Company name: MESC
Created by: Amira Elbarbary
Phone:
Date: 03/01/2023
Description Value
Insulation class (IEC 85): H
Explosion proof: no
Built-in motor protection: THERMAL SWITCH
Length of power cable: 10 m
Cable type: 07RN8-F
Controls:
Control box: not included
Moisture sensor: with moisture sensors
Water-in-oil sensor: without water-in-oil sensor
Others:
Net weight: 92.1 kg
Danish VVS No.: 391284183
Finnish LVI No.: 4836143
Printed from Grundfos Product Centre [2022.55.011] 6/10
Company name: MESC
Created by: Amira Elbarbary
Phone:
Date: 03/01/2023
On request SL1.50.65 .30.2.50D.C 50 Hz
171
321
145
4 x M16
641
DN65
67
145
216
366 4 x 18 DN65
Note! All units are in [mm] unless others are stated.
Disclaimer: This simplified dimensional drawing does not show all details.
Printed from Grundfos Product Centre [2022.55.011] 7/10
Company name: MESC
Created by: Amira Elbarbary
Phone:
Date: 03/01/2023
On request SL1.50.65 .30.2.50D.C 50 Hz
514
364
81
1.5
175
DN65
740
516
468
99
266
4XM16 1
210
95
140
701
Note! All units are in [mm] unless others are stated.
Disclaimer: This simplified dimensional drawing does not show all details.
Printed from Grundfos Product Centre [2022.55.011] 8/10
Company name: MESC
Created by: Amira Elbarbary
Phone:
Date: 03/01/2023
On request SL1.50.65 .30.2.50D.C 50 Hz
478.5
270
19
65
771
356
130
325
Note! All units are in [mm] unless others are stated.
Disclaimer: This simplified dimensional drawing does not show all details.
Printed from Grundfos Product Centre [2022.55.011] 9/10
Company name: MESC
Created by: Amira Elbarbary
Phone:
Date: 03/01/2023
On request SL1.50.65 .30.2.50D.C 50 Hz
Note! All units are in [mm] unless others are stated.
Printed from Grundfos Product Centre [2022.55.011] 10/10
