Scribd
Upload
10 views1 page

PQR - As - Run - Sheet ALLOY 825

This document is a Welding Procedure Qualification Record (PQR) detailing the qualifications for welding Alloy 825 using the GTAW process. It includes information about the welder, welding parameters, base metal, consumables, and joint details. The record specifies various layers of welding with corresponding current, voltage, and heat input data.

Uploaded by

x지털카메라
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
10 views1 page

PQR - As - Run - Sheet ALLOY 825

This document is a Welding Procedure Qualification Record (PQR) detailing the qualifications for welding Alloy 825 using the GTAW process. It includes information about the welder, welding parameters, base metal, consumables, and joint details. The record specifies various layers of welding with corresponding current, voltage, and heat input data.

Uploaded by

x지털카메라
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

WELDING PROCEDURE QUALIFICATION RECORD (AS-RUN SHEET)

PQR NO. : GTIS-PQR-Alloy825 WPS NO. : GTIS-WPS-Gr-Alloy825 WELDER NAME Kim, Ji hun DATE 2024.10.01
Welding Process GTAW Type Manual
Welding Possition GTAW-3G Progression UPHILL FOR 3G
Base Metal B424(N08825 Gr.1) to B424(N08825 Gr.1) WELDING CONSUMABLES
Heat No 20457 PASS No. BRAND NAME Size Lot No.
Dimension 10mm ROOT 2.4mm RJ031
Shielding Argon Flow Rate 8-15L/Min HOT KISWEL 2.4mm RJ031
Back Purging Argon Back Purge Purity 99.99% Argon FILL (KW-T625) 3.2mm QZ466
Gas Cup Size 19mm FINAL 3.2mm QZ466
Joint Detail Pass Details

WELDING PERAMETERS

Filler Metal Current Heat Input


Layer Electrode Volts Range Welding Speed I/Pass Temp
Layer No. Pass No. Amps Bead Length Arc Time Max Remark
Thick. Polarity (V) (cm/min) Range
AWS Spec. Size Range(A) (KJ/cm)

ROOT 1 2.5mm ERNiCrMo-3 2.4mm DCEN 140 14.0-14.7 500mm 7min 41sec 6.5 18.54 Max 150℃ GTAW
HOT 2 1.5mm ERNiCrMo-3 2.4mm DCEN 155 14.2-15.1 500mm 4min 59sec 10.03 13.58 Max 150℃ GTAW
FILL 3 3mm ERNiCrMo-3 3.2mm DCEN 190 16.6-17.6 500mm 6min 16sec 7.98 24.43 Max 150℃ GTAW
FINAL 4 3mm ERNiCrMo-3 3.2mm DCEN 185 16.5-17.2 500mm 6min 28sec 7.73 24.20 Max 150℃ GTAW

You might also like