226B3 SKID STEER LOADER

MWD00001-UP

Tip: Use Bookmarks panel to navigate

Printed by Heavy Equipment Manuals Printed in U.S.A

v2.20

Heavy Equipment Manuals

 CATERPILLAR 226B3 SKID STEER
LOADER SERVICE REPAIR MANUAL
MWD00001-UP

Download Now:
https://www.heavy-
equipmentmanual.com/products/download-caterpillar-
226b3-skid-steer-loader-service-repair-manual-mwd-1

If you have any question Contact us :

[email protected]
 
 
 
 
 
 
 

 

 

 

 

 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 



Product: SKID STEER LOADER

Model: 226B3 SKID STEER LOADER MWD
Configuration: 226B3 Skid Steer Loader MWD00001-UP (MACHINE) POWERED BY C2.2 Engine

Disassembly and Assembly

C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines
Media Number -KENR6948-08 Publication Date -01/06/2015 Date Updated -28/05/2019

i02601956

Alternator - Remove and Install - 55 Amp Alternator

SMCS - 1405-010

S/N - CMY1-UP

S/N - CYP1-UP

S/N - CYS1-UP

Removal Procedure
Start By:

a. Remove the V-Belt. Refer to Disassembly and Assembly, "V-Belts - Remove and Install".

NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.

1. Turn the battery disconnect switch to the OFF position.

2. Make temporary identification marks on the connections of the harness assembly.

 Illustration 1 g01308282
Typical example

3. Disconnect the harness assembly (not shown) from alternator (5).

4. Remove bolt (2) and washer (3) from alternator (5).

5. Remove fasteners (6) and (7) and remove alternator (5) from the mounting bracket.

6. If necessary, remove bolt (2) and remove adjusting link (4).

Installation Procedure
 Illustration 2 g01308282
Typical example

1. If necessary, install adjusting link (4) and install bolt (1) finger tight.

2. Position alternator (5) on the mounting bracket.

3. Install fasteners (6) and (7) finger tight.

4. Install bolt (2) and washer (3) finger tight.

5. Install the V-Belt. Refer to Disassembly and Assembly, "V-Belts - Remove and Install".

Note: Ensure that the alternator pulley is in alignment with the crankshaft pulley. Ensure
that all fasteners are tightened.

6. Connect the harness assembly (not shown) to the alternator.

7. Turn the battery disconnect switch to the ON position.

Copyright 1993 - 2021 Caterpillar Inc. Wed Sep 15 21:12:06 UTC+0530 2021
All Rights Reserved.
Private Network For SIS Licensees.
 



Product: SKID STEER LOADER

Model: 226B3 SKID STEER LOADER MWD
Configuration: 226B3 Skid Steer Loader MWD00001-UP (MACHINE) POWERED BY C2.2 Engine

Disassembly and Assembly

C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines
Media Number -KENR6948-08 Publication Date -01/06/2015 Date Updated -28/05/2019

i02601962

Alternator - Remove and Install - 65 Amp and 85 Amp

Alternators
SMCS - 1405-010

S/N - CMY1-UP

S/N - CYP1-UP

S/N - CYS1-UP

Removal Procedure
Start By:

a. Remove the V-Belt. Refer to Disassembly and Assembly, "V-Belts - Remove and Install".

NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.

1. Turn the battery disconnect switch to the OFF position.

2. Make temporary identification marks on the connections of the harness assembly.

 Illustration 1 g01308285
Typical example

3. Disconnect the harness assembly (not shown) from alternator (5).

4. Remove bolt (4) and washer (3) from alternator (5).

5. Remove washer (7) and nut (6). Remove bolt (8) and alternator (5) from the mounting
bracket.

6. If necessary, remove bolt (1) and remove adjusting link (2).

Installation Procedure
 Illustration 2 g01308285
Typical example

1. If necessary, install adjusting link (2) and install bolt (1) finger tight.

2. Position alternator (5) on the mounting bracket.

3. Install bolt (8), washer (7) and nut (6) finger tight.

4. Install bolt (4) and washer (3) finger tight.

5. Install the V-Belt. Refer to Disassembly and Assembly, "V-Belts - Remove and Install".

Note: Ensure that the alternator pulley is in alignment with the crankshaft pulley. Ensure
that all fasteners are tightened.

6. Connect the harness assembly (not shown) to the alternator.

7. Turn the battery disconnect switch to the ON position.

Copyright 1993 - 2021 Caterpillar Inc. Wed Sep 15 21:12:18 UTC+0530 2021
All Rights Reserved.
Private Network For SIS Licensees.
 



Product: SKID STEER LOADER

Model: 226B3 SKID STEER LOADER MWD
Configuration: 226B3 Skid Steer Loader MWD00001-UP (MACHINE) POWERED BY C2.2 Engine

Disassembly and Assembly

C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines
Media Number -KENR6948-08 Publication Date -01/06/2015 Date Updated -28/05/2019

i02237832

Bearing Clearance - Check

SMCS - 1203-535; 1219-535

Measurement Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty

Plastic Gauge (Green)

198-9142 0.025 to 0.076 mm 1
(0.001 to 0.003 inch)
Plastic Gauge (Red)
198-9143 0.051 to 0.152 mm 1
(0.002 to 0.006 inch)
A
Plastic Gauge (Blue)
198-9144 0.102 to 0.229 mm 1
(0.004 to 0.009 inch)

Plastic Gauge (Yellow)

198-9145 0.230 to 0.510 mm 1
(0.009 to 0.020 inch)

NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.

 CATERPILLAR 226B3 SKID STEER
LOADER SERVICE REPAIR MANUAL
MWD00001-UP

Download Now:
https://www.heavy-
equipmentmanual.com/products/download-caterpillar-
226b3-skid-steer-loader-service-repair-manual-mwd-1

If you have any question Contact us :

[email protected]
Note: Caterpillar does not recommend the checking of the actual bearing clearances particularly
on small engines. This is because of the possibility of obtaining inaccurate results and the
possibility of damaging the bearing or the journal surfaces. Each Caterpillar engine bearing is
quality checked for specific wall thickness.

Note: The measurements should be within specifications and the correct bearings should be used.
If the crankshaft journals and the bores for the block and the rods were measured during
disassembly, no further checks are necessary. However, if the technician still wants to measure the
bearing clearances, Tooling (A) is an acceptable method. Tooling (A) is less accurate on journals
with small diameters if clearances are less than 0.10 mm (0.004 inch).

NOTICE

Lead wire, shim stock or a dial bore gauge can damage the bearing
surfaces.

The technician must be very careful to use Tooling (A) correctly. The following points must be
remembered:

• Ensure that the backs of the bearings and the bores are clean and dry.

• Ensure that the bearing locking tabs are properly seated in the tab grooves.

• The crankshaft must be free of oil at the contact points of Tooling (A).

1. Put a piece of Tooling (A) on the crown of the bearing that is in the cap.

Note: Do not allow Tooling (A) to extend over the edge of the bearing.

2. Use the correct torque-turn specifications in order to install the bearing cap. Do not use an
impact wrench. Be careful not to dislodge the bearing when the cap is installed.

Note: Do not turn the crankshaft when Tooling (A) is installed.

3. Carefully remove the cap, but do not remove Tooling (A). Measure the width of Tooling
(A) while Tooling (A) is in the bearing cap or on the crankshaft journal. Refer to Illustration
1.
 Illustration 1 g00953605
Typical Example

4. Remove all of Tooling (A) before you install the bearing cap.

Note: When Tooling (A) is used, the readings can sometimes be unclear. For example, all
parts of Tooling (A) are not the same width. Measure the major width in order to ensure that
the parts are within the specification range. Refer to Specifications Manual, "Connecting
Rod Bearing Journal" and Specifications Manual, "Main Bearing Journal" for the correct
clearances.

Copyright 1993 - 2021 Caterpillar Inc. Wed Sep 15 21:10:13 UTC+0530 2021
All Rights Reserved.
Private Network For SIS Licensees.
 



Product: SKID STEER LOADER

Model: 226B3 SKID STEER LOADER MWD
Configuration: 226B3 Skid Steer Loader MWD00001-UP (MACHINE) POWERED BY C2.2 Engine

Disassembly and Assembly

C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines
Media Number -KENR6948-08 Publication Date -01/06/2015 Date Updated -28/05/2019

i02601967

Camshaft - Assemble
SMCS - 1210-016

Assembly Procedure

NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.

1. Ensure that all components of the camshaft assembly are clean and free from damage.
 Illustration 1 g01326129
Typical example

2. Lubricate the nose of camshaft (1) with clean engine oil. Use a suitable press to install
bearing (3) to the camshaft.

Note: Ensure that the bearing is installed in the correct orientation. The camshaft bearing
should be pressed squarely onto the camshaft or damage to the bearing may occur. Do not
press on the outer race of the bearing.

3. Install spacer (4) and woodruff key (2) to camshaft (1).

4. Align gear (5) with woodruff key (2). Use a suitable press to install the gear to the nose of
camshaft (1).

Note: The gear should be positioned on a suitable support in order to prevent damage to the
governor flyweights during installation.

End By:

a. Install the camshaft assembly. Refer to Disassembly and Assembly, "Camshaft - Install".

Copyright 1993 - 2021 Caterpillar Inc. Wed Sep 15 21:07:10 UTC+0530 2021
All Rights Reserved.
Private Network For SIS Licensees.
 



Product: SKID STEER LOADER

Model: 226B3 SKID STEER LOADER MWD
Configuration: 226B3 Skid Steer Loader MWD00001-UP (MACHINE) POWERED BY C2.2 Engine

Disassembly and Assembly

C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines
Media Number -KENR6948-08 Publication Date -01/06/2015 Date Updated -28/05/2019

i02601970

Camshaft - Disassemble
SMCS - 1210-015

Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Name Qty

A 1P-2320 Combination Puller 1

Start By:

a. Remove the camshaft assembly. Refer to Disassembly and Assembly, "Camshaft -

Remove".

NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.

 Illustration 1 g01326129
Typical example

1. Use Tooling (A) to remove gear (5) from camshaft (1).

Note: The gear should be positioned on a suitable support in order to prevent damage to the
governor flyweights during disassembly.

2. Remove spacer (4) and woodruff key (2) from camshaft (1).

3. Use Tooling (A) to remove bearing (3) from camshaft (1).

Note: Identify the orientation of the bearing for installation.

Copyright 1993 - 2021 Caterpillar Inc. Wed Sep 15 21:06:59 UTC+0530 2021
All Rights Reserved.
Private Network For SIS Licensees.
 



Product: SKID STEER LOADER

Model: 226B3 SKID STEER LOADER MWD
Configuration: 226B3 Skid Steer Loader MWD00001-UP (MACHINE) POWERED BY C2.2 Engine

Disassembly and Assembly

C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines
Media Number -KENR6948-08 Publication Date -01/06/2015 Date Updated -28/05/2019

i07360734

Camshaft - Install
SMCS - 1210-012

Installation Procedure

NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.

1. Ensure that the assembly of the camshaft is clean and free from damage.

2. Lubricate the bearings of the camshaft with clean engine oil.

 Illustration 1 g01311416
Typical example

Illustration 2 g01311407
Typical example

3. Carefully install camshaft assembly (8) into the cylinder block. Ensure that timing marks
(X) are aligned on the following gears:
 Crankshaft gear (7)

Camshaft gear (4)

Idler gear (6)

Note: Do not damage the lobes of the camshaft or the camshaft bearings.

Illustration 3 g01311411
Typical example

Note: The C1.1 engine has a different camshaft retainer and different fasteners to C1.5 and
C2.2 engines. The installation procedure is similar for all models.

4. Place camshaft retainer (5) in position. Align the holes in the retainer with the holes in the
cylinder block.

5. Rotate camshaft gear (4) to align the access hole in the camshaft gear with the hole for
fastener (2).

For the C1.1 engine, install allen head screw (2) and bolt (1). Tighten fasteners (1) and (2)
to a torque of 10 N·m (89 lb in).

For C1.5 and C2.2 engines, install bolt (2) and tighten to a torque of 10 N·m (89 lb in).
Rotate camshaft gear (4) to align the access hole in the camshaft gear with the hole for bolt
(1). Install bolt (1) and tighten to a torque of 10 N·m (89 lb in).
 6. Install slider (3) to camshaft gear (4).

7. If the engine is equipped with a mechanical fuel transfer pump, install the fuel transfer
pump. Refer to Disassembly and Assembly, "Fuel Transfer Pump - Remove and Install".

End By:

a. Install the lifters. Refer to Disassembly and Assembly, "Lifter Group- Remove and Install".

b. Install the front housing. Refer to Disassembly and Assembly, "Housing (Front) - Install".

Copyright 1993 - 2021 Caterpillar Inc. Wed Sep 15 21:07:25 UTC+0530 2021
All Rights Reserved.
Private Network For SIS Licensees.
 



Product: SKID STEER LOADER

Model: 226B3 SKID STEER LOADER MWD
Configuration: 226B3 Skid Steer Loader MWD00001-UP (MACHINE) POWERED BY C2.2 Engine

Disassembly and Assembly

C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines
Media Number -KENR6948-08 Publication Date -01/06/2015 Date Updated -28/05/2019

i07360727

Camshaft - Remove
SMCS - 1210-011

Removal Procedure
Start By:

a. Remove the lifters. Refer to Disassembly and Assembly, "Lifter Group - Remove and
Install".

b. Remove the front housing. Refer to Disassembly and Assembly, "Housing (Front) -
Remove".

NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.

NOTICE

Care must be taken to ensure that fluids are contained during

performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.

Dispose of all fluids according to local regulations and mandates.

1. If the engine is equipped with a mechanical fuel transfer pump, remove the fuel transfer
pump. Refer to Disassembly and Assembly, "Fuel Transfer Pump - Remove and Install".

Illustration 1 g01311407
Typical example
 Illustration 2 g01311411
Typical example

2. Remove slider (3) from camshaft gear (4).

Note: The C1.1 engine has a different camshaft retainer and different fasteners to C1.5 and
C2.2 engines. The removal procedure is similar for all models.

3. Rotate camshaft gear (4) to align the access hole in the camshaft gear with fastener (2).

For the C1.1 engine, remove allen head screw (2) and remove bolt (1).

For C1.5 and C2.2 engines, remove bolt (2). Rotate camshaft gear (4) to align the access
hole in the camshaft gear with bolt (1). Remove bolt (1).

4. Remove camshaft retainer (5).

5. Rotate the crankshaft until timing marks (X) are aligned on the following gears:

Crankshaft gear (7)

Camshaft gear (4)

Idler gear (6)

 Illustration 3 g01311416
Typical example

6. Carefully remove camshaft assembly (8) from the cylinder block.

Note: Ensure that the lobes of the camshaft and the camshaft bearings are not damaged.

Copyright 1993 - 2021 Caterpillar Inc. Wed Sep 15 21:06:36 UTC+0530 2021
All Rights Reserved.
Private Network For SIS Licensees.
 



Product: SKID STEER LOADER

Model: 226B3 SKID STEER LOADER MWD
Configuration: 226B3 Skid Steer Loader MWD00001-UP (MACHINE) POWERED BY C2.2 Engine

Disassembly and Assembly

C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines
Media Number -KENR6948-08 Publication Date -01/06/2015 Date Updated -28/05/2019

i07360748

Connecting Rod Bearings - Install - Connecting rods in

position
SMCS - 1219-012

Installation Procedure

NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.

1. Inspect the pins of the crankshaft for damage. If the crankshaft is damaged, replace the
crankshaft or recondition the crankshaft. Refer to Disassembly and Assembly, "Crankshaft -
Remove" and Disassembly and Assembly, "Crankshaft - Install". Ensure that the connecting
rod bearings are clean and free from wear or damage. If necessary, replace the connecting
rod bearings.
 Illustration 1 g01317759
Typical example

2. Clean the bearing surface of connecting rod (1) and connecting rod cap (5). Ensure that
number (X) on connecting rod cap (5) aligns with number (X) on connecting rod (1).

3. Install upper connecting rod bearing (3) to connecting rod (1). Lubricate the bearing surface
of the connecting rod bearing with clean engine oil.

4. Carefully pull connecting rod (1) against the crankshaft pin.

Note: Use tape or rubber tubing on connecting rod bolts (2) to protect the crankshaft
journals. The sharp edges of the connecting rod bolts could damage the crankshaft journals.

5. Clean the connecting rod cap. Install lower connecting rod bearing (4) to connecting rod cap
(5).

6. Lubricate the pin of the crankshaft and lubricate lower connecting rod bearing (3) with clean
engine oil.

NOTICE

When the connecting rod caps are installed, ensure that the
identification marks are aligned.
 CATERPILLAR 226B3 SKID STEER
LOADER SERVICE REPAIR MANUAL
MWD00001-UP

Download Now:
https://www.heavy-
equipmentmanual.com/products/download-caterpillar-
226b3-skid-steer-loader-service-repair-manual-mwd-1

If you have any question Contact us :

[email protected]