Industrial Cellular

Routers & Gateways

ICR-2834 Industrial 4G Router & IoT Gateway

ƒ LTE Cat.4 with 3G/2G fallback

ƒ GNSS receiver
ƒ 1.3 GB eMMC storage to host customer SW applications
ƒ 2× SIM with cover
ƒ 2× Ethernet 10/100
ƒ 2× Serial RS232/RS485
ƒ Optional WiFi 802.11n
ƒ USB Host 2.0
ƒ Optional Metal or Plastic case
ƒ DIN Rail mounting
ƒ Wide operational temperature range
ƒ Backup real time clock
ƒ Sleep mode
Project based customization: Last-gasp Supercapacitor, TPM 2.0, Chip SIM (MFF2)

RoHS

Introduction
COMPLIANT
2002/95/EC

ICR-2834 is enhanced successor of the Advantech´s cellular router platform v2 originally introduced in 2010. Ruggedized for industrial use keeping the same dimensions, configuration possibilities and
most of the interfaces including GNSS, serial RS232/RS485 and numerous binary I/O´s. ICR-2834 offers more detailed LED indication and mainly more powerful CPU and amply of data storage to ensure
long lifecycle (software updates) with broad software customization possibilities for user than older v2 platform. On project-based agreement, we can optionally add a TPM 2.0 chip (Trusted Platform Module)
onboard verifying router integrity to provide trusted solution as a response to increasing cybersecurity demands.
Cellular router is equipped with 2× Ethernet 10/100 ports with two independent LANs/IP addresse, 1× USB 2.0 host port, 2× serial ports RS232/RS485 independently selectable by DIP switch, 2× plate covered
SIM card holders for automatic failover to an alternate service provider, 4× binary inputs (I/O), 2× binary outputs (I/O) and on-board GNSS receiver for device positioning and time synchronization. Optional
built-in WiFi 802.11 ac,a,b,g,n with AP, Client and Multirole modes are available.
The router is powered by Linux based Advantech´s operating system ICR-OS. A secure web interface allows users to configure ICR-2834 from remote locations. ICR-2834 supports real-time data encryption
and VPN tunnelling using IPsec, WireGuard, OpenVPN, GRE, etc. It supports standard and advanced networking features like DHCP, NAT, NAT-T, DynDNS, NTP, VRRP, control by SMS and other features.
The 1.3 GB eMMC available storage for customer with an open Linux platform and the wide possibility of programming customer SW applications in Python and C/C++ ICR-2834 offers a real open development
platform for Industrial IoT applications. Advantech existing Router App library (User modules) includes industrial protocol conversions, dynamic protocols and support of IoT platforms such as MS Azure,
Cumulocity, and others. ICR-2834 is easy to install individually and in mass deployments too by using a full-featured configuration and monitoring software tool WebAccess/DMP. Safe remote VPN access to
customer devices and PC´s connected to routers through Internet can be administrated by additional software WebAccess/VPN.
Popular use cases includes PLC connection and various industrial automation and industry 4.0 applications, camera connection (streets/highways/parking etc.), mobile signs and warning systems, wind turbines
and solar power stations connection, measuring and monitoring systems in transportation, remote access for maintenance staff or electricity, gas or petrol distribution. ICR-2834 to be designed to provide high
compatibility alternative for most of the previous v2 router platform users and with extended memory and TPM chip brings advantages also to newly developed sectors in public, industrial or IoT environment.

Order Codes
2× Ethernet 1× DIV 1× USBHost 2× Serial Metal Plastic
Model no. - Order Codes REGION 2× SIM GNSS WiFi Accessories
10/100 Mbps 1× ANT 2.0 RS232/RS485 Case Case

ICR-2834G EMEA       

ICR-2834GP EMEA       

ICR-2834GA01 EMEA         EU Power Supply

ICR-2834GPA01 EMEA         EU Power Supply

ICR-2834GA02 EMEA         UK Power Supply

ICR-2834GPA02 EMEA         UK Power Supply

ICR-2834W EMEA       

ICR-2834WP EMEA       

ICR-2834WA01 EMEA         EU Power Supply

ICR-2834WPA01 EMEA         EU Power Supply

ICR-2834WA02 EMEA         UK Power Supply

ICR-2834WPA02 EMEA         UK Power Supply

* - Router is compatible with cellular networks in the indicated region. Importer/operator needs to check locale legislation (standards, national Telecom approvals etc.) and compare with standards available
for product if possible to operate the router in target region legally

Industrial Cellular Gateways & Routers

All product specifications are subject to change without notice. Last updated: 9-Dec-2024
 Industrial Cellular
Routers & Gateways

ICR-2834

Specifications Environmental
Power Supply 9 – 48 V DC (2-pin terminal block)
System
Consuption Idle 1.9 W / Average 3.5 W / Maximum 7.4 W
CPU ARM926EJ-S, 600 MHz
Sleep Mode Yes, 6 mW
RAM - 128 MB
Operating Temperature -40 to +75 °C
Memory eMMC - 4096 MB
(838 MB for Router Apps, 512 MB for customer data) Storage Temperature -40 to +85 °C
Watchdog HW Watchdog Humidity 5 to 95 %
RTC Battery backup RTC IP Cover IP30
TPM* Trusted Platform Module (TPM) 2.0 Physical Characteristics
Supercap* Last-gasp Supercapacitor Metal Case: 42 × 80.3 × 113.2 mm
Dimensions
Plastic Case: 51.4 × 83.8 × 117 mm
Interfaces
Enclosure Metal Case with grounding screw or Plastic Case
Ethernet 2× Ethernet, RJ45, 10/100 Mbps, Isolation 1.5 kV
Mounting DIN-Rail
2× RS232/RS485 independently selectable by DIP switch
RS232 (Tx, Rx, GND, RTS, CTS), Metal Case: 300 g
Serial Lines Weight
RS485 (A(-), B(+), GND), Plastic Case: 240 g
16-pin terminal block (no isolation)
4× Digital Input (48 V / 3 mA consumption)
GNSS - ICR-2834Gxxx
I/O 2× Digital Output (Open Drain, 48 V / 500 mA) Antenna 1× SMA connector, active (50 mA)
16-pin terminal block (no isolation) Systems GPS, GLONASS, BeiDou, Galileo
USB 1× USB 2.0 Host Connector Protocol NMEA 0183
Reset Button Reboot / Factory reset Ac Time-to-First-Fix Warm start: 28 s, Cold 32 s
System, Signal strength, Data activity, SIM1, SIM2, 2G/3G/4G technology,
LED Indicators WiFi - ICR-2834Wxxxx
User, ETH
* Project based customization Antenna 1× R-SMA connector
Standards IEEE802.11 ac/a/b/g/n 2.4 GHz / 5 GHz
Security WEP, TKIP, AES, WPA, WPA2, WPA3, 802.1X
Modes Access Point (up to 8 clients), Station, Multirole STA & AP

Cellular Interface
SIM Slots 2× SIM (Mini SIM – 2FF) with cover, *1× Chip SIM (MFF2)
Antennas 2× SMA connector (1× Main, 1× Diversity)
Supported FDD frequencies: B1 (2100 MHz), B3 (1800 MHz), B5 (850 MHz), B7 (2600 MHz), B8 (900 MHz), B20 (800 MHz), B28 (700 MHz)
LTE Parameters
Transfer rate: 150 Mbps (DL), 50 Mbps (UL)
Supported frequencies: B1 (2100 MHz), B3 (1800 MHz), B8 (900 MHz)
HSPA+/UMTS Parameters
Transfer rate: 14.4 Mbps (DL), 5.76 Mbps (UL)
Supported frequencies: B2 (1900 MHz), B3 (1800 MHz), B5 (850 MHz), B8 (900 MHz)
EDGE/GPRS Parameters
Transfer rate: 237 kbps (DL), 237 kbps (UL)
* Project based customization

Software
Operating System ICR-OS (Linux based)
SW Customization Router App
Application Development Open Linux, *Python, BASH, C/C++
Industrial Protocols and IoT *Modbus RTU/TCP gateway, *IEC 60870-5-101 to 104 gateway, *DF1, *DNP3, *MQTT, *LWM2M
Networking Features DHCP, NAT/PAT, SSH, VRRP, PPPoE, SNMP, SMTP, Dynamic DNS client, DNS proxy, VLAN, QoS, *DMVPN, NTP Client/Server, *Routing protocols RIP, BGP, OSPF,
and Protocols IS-IS, NHRP, Backup Routes, Port Forwarding, Host Port Routing, Ethernet Bridging, Load Balancing, IPv6 Dual Stack
HTTPS, SSH, SFTP, DMZ, Firewall (IP Filtering, MAC address filtering, Inbound and outbound Port filtering)
VPN Tunneling – WireGuard, OpenVPN, *EasyVPN, IPsec with IKEv1 and IKEv2, GRE, L2TP, PPTP
Security
Authentication – RADIUS, TACACS+, 2FA, *SCEP
Encryption – DES, 3DES, AES, RSA, MD5, SHA
Automatic firmware updates – server, locally via LAN or remotely via WAN
Firmware Management
Over-the-Air cellular module firmware updates
Status – Signal Strength, Data Usage
One CLICK report – Current Configuration, Factory Identification, Routing Table
Diagnostic/Log
Log – System Log, Reboot Log, Kernel Log
Remote Diagnostics (via SSH)
StartUp script & Up/Down script (Own rules based on Digital Inputs, Network Parameters, Data Usage, Timer, Power, Device Temperature)
Event Engine
Report Types: SMS, *email, *SNMP Trap
Configuration Web server, SSH, Four configuration switchable profiles, Automatic configuration update from server, Backup & Restore configuration
WebAccess/DMP – Remote Device Provisioning, Monitoring & Management Platform
Advanced Software Tools
WebAccess/VPN – Advanced Secure Networking Platform
*Functionality is available with installed Router App

Industrial Cellular Gateways & Routers Online Download www.advantech.com/products

 Industrial Cellular
Routers & Gateways

ICR-2834
Standards & Regulations
Radio EN 301 511, EN 301 908-1, EN 301 908-2, EN 301 908-13, EN 303 413, EN 301 893, EN 300 328
EN 301 489-1, EN 301 489-17, EN 301 489-19, EN 301 489-52, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-11,
EMC
IEC 61000-6-2, IEC 61000-6-3, EN 55032
Safety EN 62368-1, IEEE 802.3
Transportation E8
National CE, UKCA
Mechanical EN 60529, EN 60068-2-27, EN 60068-2-64
Climatic EN 60068-2-1, EN 60068-2-2, EN 60068-2-14, EN 60068-2-30
Environmental REACH, RoHS3, WEEE

Views
FRONT VIEWS
METAL VERSION PLASTIC VERSION
GNSS, WiFi antenna connector 16-pin Serial / IO connector GNSS, WiFi antenna connector 16-pin Serial / IO connector
LED Indicators 2× Covered SIM ETH 10/100 connectors RESET button LED Indicators 2× Covered SIM ETH 10/100 connectors RESET button
Serial Mode Switch Serial Mode Switch

DIV, ANT antenna connector USB Host connector PWR connector DIV, ANT antenna connector USB Host connector PWR connector

REAR VIEWS
Ground clamp

DIN Holder DIN Holder

Accessories
Sold
Included in the package
Separately
ICR-2834 ICR-2834P ICR-2834GA01 ICR-2834PA01 ICR-2834GA02 ICR-2834PA02
Part Number Description
ICR-2834W ICR-2834WP ICR-2834WA01 ICR-2834WPA01 ICR-2834WA02 ICR-2834WPA02
BB-CON-WR2 2-pin PWR connector       
CON-ICR28-16 16-pin Serial / IO connector       
BB-SBD40 DIN clip    
BB-SBD40P DIN clip    
BB-KD-ETH Ethernet cross cable     
BB-RPS-v2-WR2-EU Wall mount Power supply, 12V/1A, EU plug   
BB-RPS-v2-WR2-UK Wall mount Power supply, 12V/1A, UK plug   
BB-RPS-v2-WR2-US Wall mount Power supply, 12V/1A, US plug 
ANT-LTE5G-025 Antenna 5G/LTE, Terminal 2 pcs 2 pcs 2 pcs 2 pcs 
OPT1-ANT-WFT-06 Antenna Wi-Fi, Terminal ICR-2834WA01 ICR-2834WPA01 ICR-2834WA02 ICR-2834WPA02 
For more accessories (Antennas, Power Supplies) visit www.advantech.com
Industrial Cellular Gateways & Routers Online Download www.advantech.com/products
 Industrial Cellular
Routers & Gateways

ICR-2834

Dimensions - Technical Drawing

Unit: mm
Metal version with DIN holder
113,2
56,60 56,60

8,9
80,3
89,2
89,2
80,3

8,9

42

42
113,2

Plastic version with DIN holder

48,6
8,9
83,8
92,7
92,7
83,8

6,1

51,4
51,4

117

Industrial Cellular Gateways & Routers Online Download www.advantech.com/products