sCELL-H2000 (2x20W) DATASHEET
sCELL-H2000
LTE Integrated eNodeB
2*20W with MIMO
Passive Cooling IP65
192 Concurrent Users
384 RRC Users
The sCELL-H2000 from BTI WIRELESS is an advanced outdoor LTE compact product that operates in TDD mode. This eNB
provides users with high-speed broadband wireless access to the Internet using 2x20W output power (2x2 MIMO with
20W output each channel). This eNodeB can operate in 5, 10, 15 or 20 MHz bandwidth, supporting 192 concurrent users
and 384 RRC users.
Copyright © 2023 BTI WIRELESS All rights reserved.
sCELL-H2000 (2x20W) DATASHEET
KEY FEATURES
Standard LTE TDD Band 40 or customized
Complies with 3GPP Release 13 standard
Supports 5/10/15/20 MHz bandwidth
GUI-based local and remote Web management
TR069 network management interface support
External high-gain antenna
Peak rate (per unit):
SA1 DL: 80 Mbps, UL: 20 Mbps @ 20 MHz bandwidth
SA2 DL: 110 Mbps, UL: 10 Mbps @ 20 MHz bandwidth
192 concurrent users per eNodeB
384 RRC users per eNodeB
Passive Cooling IP65
HARDWARE SPECIFICATIONS
LTE Mode TDD
Frequency Bands B38/B40 or customized
Channel Bandwidth 5/10/15/20 MHz
Max Output Power 43dBm / channel
Power Supply -48V DC or 220V AC
Power Consumption ≤ 250W
Receive Sensitivity < -104dBm
Synchronization GPS, 1588 (optional)
Interfaces One optical (SFP) and one RJ-45 Ethernet interface
MIMO 2x2
Installation Pole or wall mount
External high-gain antenna compatible with eNodeB 4.3-10
Antenna Type
Female interface
Dimensions (HxWxD) 400 x 300 x 125 mm | 15.75 x 11.81 x 4.92 in
Weight < 20 kg | 44.1 lbs (exclude accessories)
MTBF > 100,000 hours
SOFTWARE SPECIFICATIONS
LTE Standard 3GPP Release 13
192 concurrent users
User Capacity
384 RRC users
QoS Control 3GPP standard GBR QCI (1-4), Non GBR QCI (5-9)
Copyright © 2023 BTI WIRELESS All rights reserved.
sCELL-H2000 (2x20W) DATASHEET
Extended QCI 10-255
DL: QPSK, 16QAM, 64QAM, 256QAM
Modulation
UL: QPSK, 16QAM, 64QAM
Network Management TR069
Remote or local maintenance
Online status management
Performance statistics
Fault management
Local or remote software upgrade
Maintenance Logging
Connectivity diagnosis
Automatic start and configuration
Alarm reporting
User information tracing
Signaling trace
INTERFACE
INTERFACE SPECIFICATIONS
1 PWR light Power-on indicator light
2 4G light Active cell indicator light
3 10M 10M input interface (for testing)
4 Trig Trig signal output port (for testing)
5 GPS SNIFF interface for GPS synchronization
6 OP Optical port backhaul interface
7 WAN Backhaul network port, connected to the core network
8 LAN Local commissioning network port, used to log in to the local web or telnet
9 PWR Power supply interface
10 CH1 LTE RF output port 1
11 CH2 LTE RF output port 2
Copyright © 2023 BTI WIRELESS All rights reserved.
sCELL-H2000 (2x20W) DATASHEET
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature -40 °C ~ +55 °C | -40 °F ~ +131 °F
Storage Temperature -40 °C ~ +75 °C | -40 °F ~ +158 °F
Humidity 5% ~ 98%
Atmospheric Pressure 86 KPa ~ 106 KPa
Ingress Protection Rating IP65
Lightning Protection GB/T 17626.5 standard
Note: Features may vary based on model or region.
TYPICAL APPLICATION
In rural and suburban areas, the wireless network coverage is relatively wide, but the users are less fixed
than the fixed ones. By deploying LTE integrated high-power base stations in a town or natural village, the
signal coverage in a small area can be achieved, reaching low Investment in rural 4G wireless access.
In order to solve the indoor and outdoor coverage problems of large and medium-sized scenes in Hunan
Province, Hunan Mobile purchases our integrated high-power base stations to increase the breadth and
depth of network coverage, which greatly improves network quality and service quality.
Rural Road Industrial Campus Capacity Compensation
Contact Us
www.btiwireless.com
[email protected]
Copyright © 2023 BTI WIRELESS All rights reserved.
