LV-S / H series

Laser Sensor Catalogue

Choose from the largest selection of laser sensors in the industry!

New laser sensors P. 6

Long-distance transparent Area retro-reflective

object detection lasers
 Product composition

The LV Series are digital laser sensors consisting of both a sensor head and an amplifier.
Please note that the supported amplifier unit depends on the sensor head.

LV-S Series Sensor head Amplifier

• Compact size
• Transparent object detection (available)
• Zero datum function (available)

LV-11SB
LV-12SB

LV-H Series Sensor head Amplifier

Reflective/Retro-Reflective
• High-power
• Waterproof (available)

LV-21A
LV-22A
LV-20A

LV-H Series Sensor head Amplifier

Thru-beam
• 10 mm/30 mm area
• Analogue output

LV-51M
LV-52

Laser sensor features

Visible beam allows for Stable target detection from Small beam spot ensures
easy installation remote location high precision

2
 Select an LV Series laser sensor

Ask the Expert

Call us for Details on
the LV Series

Product selection guide

STEP 1
Step1 Step2 Step3 Step4
Select an LV Series laser sensor
according to these selection steps Selecting Method of Specific
a beam shape detection sensor head Amplifier

Selecting a beam shape

STEP 2
Step1
Select a laser sensor head, either an area beam or small beam spot, according to
the target that is to be detected.

Area Beam
The shape of the laser beam emitted on the target forms a line.

STEP 3
Effective for wide detection ranges, such as when the target’s position varies as it passes through the beam.

Area Beam
Type
Reflective Retro-Reflective Thrubeam

Detecting

STEP 4
image

Page P.4

SPECIFICATIONS
Small Beam Spot
The shape of the laser beam emitted on the work piece forms a small spot.
Effective for highly precise detection of minute targets.

Small Beam Spot

Type
Reflective Retro-Reflective Thrubeam
DIMENSIONS

Detecting
image

Page P.5

3
 Step2 Method of detection
Select either a reflective, retro-reflective, or thrubeam sensor based on the application.

If area beam was selected in Step 1

Area Beam
Retro-Reflective P.6

Highly precise target detection with easy installation

Long-distance transparent
Area laser object detection Long distance Wide

LV-S62 LV-S63 LV-H64 LV-H65

Reflective P.9

Small size and highly flexible installation

Long distance Definite reflective

* LV-H41 is a class1 infrared laser model.

LV-H42/H41* LV-H47

Thrubeam P.10

Unaffected by the target’s colour or shape

10mm width 30mm width High-power 10mm width

LV-H100 LV-H300 LV-H110

4
 Select an LV Series laser sensor

Ask the Expert

Call us for Details on
the LV Series

STEP 1
If small beam spot was selected in Step 1

Small Beam Spot

Retro-Reflective P.12

STEP 2
Highly precise target detection with easy installation
Long distance
Small Standard (up to 50 m) Waterproof: IP67

STEP 3
LV-S61 LV-H62 LV-H67 LV-H62F

Reflective P.14

Small size and highly flexible installation

STEP 4
Small Coaxial structure Ultra-small beam spot Adjustable
(side view) Adjustable beam spot (waterproof: IP67) (diameter: 50 µm) distance setting

SPECIFICATIONS
LV-S41 (S41L) LV-H32 LV-H35 (H35F) LV-H37 LV-S31

Thrubeam P.16
DIMENSIONS

Unaffected by the target’s colour or shape

Small: M6 Small: M6 (with slit)

LV-S71 LV-S72

5
 Step3 Selecting a specific sensor head
Select a sensor head tailored to your application.

If area beam retro-reflective was selected in Step 2

Area Beam Retro-Reflective

Type Shape (mm) Detection distance* Area width (mm) Model Supported Dimensions
amplifier diagram

Area spot:
19 *1 approx. 10 mm
13.6 ULTRA : 10m (5m)
Area Laser SUPER : 8m (3.5m)
Small beam spot:
LV-S62 P.25
38 TURBO : 5m (2m)
FINE : 2.5m (0.7m) approx. 2 mm LV-11SB
(up to 500 m distance)
LV-12SB

Long-distance 21.8 ULTRA : 30m P.18

64 : 25m
Approx. 8 x 12 mm
transparent SUPER
: 15m (up to 3.5 m distance) LV-S63 P.27
object detection 44
TURBO
FINE : 8m

*2
12.4 SUPER : 400~1200mm
42.8 (600~1500mm) Approx. 40
Long-distance area TURBO : 200~850mm (up to 300 mm distance) LV-H64
23 (300~1000mm) LV-21A
FINE : 100~500mm LV-22A
(100~700mm)
LV-20A P.35
*2
SUPER : 100~200mm
46.2
12.4 (150~350mm) Approx. 50 P.19
Wide area TURBO : 10~150mm (up to 100 mm distance) LV-H65
23 (10~250mm)
FINE : 100mm
(150mm)

All models support the P.R.O. function. The polarising filter reduces direct reflected light from a mirrored-surface target.
*1 Numbers not enclosed in parentheses are the detecting distance for area spot. Numbers enclosed in parentheses are the detecting distance for small beam spot.
*2 Numbers not enclosed parentheses are the detecting distance when an accessory reflector is used. Numbers enclosed in parentheses are the detecting distance
when OP-51428 (sold separately) is used.

Product features
Using all of the mounting brackets allows you to
Area Laser adjust the optical axis right, left, up, and down.
When installing the rear mounting
LV-S62 bracket (sold separately) OP-84350

Reflector Use this switch to select

R-6L (accessory) area spot or small beam spot.

Reversed mounting
When installing the rear mounting
bracket (sold separately) OP-84349
Small Area

When installing the rear mounting

Stable detection is possible due to wide beam bracket (sold separately) OP-84351
even if the work piece’s position varies.
Side view shape and
small footprint

Reversed mounting
LV-S62 is perfect for transparent object detection. P.8 Be sure to use the dedicated mounting brackets because optical axis adjustment is required.

(Note) We recommend that, when LV-S62 is used for glass detection, the detecting distance be set to 1 m or less.

6
 Select an LV Series laser sensor

Ask the Expert

Call us for Details on
the LV Series

STEP 1
Long-Distance Transparent Object Detection
LV-S63
When the mounting bracket is
attached (accessory)

STEP 2
Reflector
R-9 (accessory)

High precision even at a long distance

Reflected light levels are averaged by

widening the acceptance surface
(approx. 32 x 15 mm).
Easy optical axis adjustment This provides stable transparent
object detection.

STEP 3
Detecting distance 30m

LV-S63 is perfect for transparent object detection. P.8

(Note) We recommend that, when LV-S63 is used for glass detection, the detecting distance be set to 3.5 m or less.

STEP 4
Long-Distance Area
LV-H64
Detection distance –
Reflector R-6 grey When the mounting bracket is area width characteristics
(accessory) attached (accessory) (typical example)
100
80
60
The beam shining on a target 40
20

SPECIFICATIONS
Area width 0
(mm) 20
40
60
80
100
0 200 400 600 800 1000
Distance (mm)
DIMENSIONS

Wide Area Options for LV-H64 and H65

LV-H65 Detection distance –
When the mounting bracket is area width characteristics Name Reflective tape (sold separately)
attached (accessory) (typical example)
Reflector R-6 grey
100 Model OP-51428
80
(accessory) 60
40
20 50
Area width 200
(mm) 40 Shape
60
80
100
0 50 100 150 200 250 300 15
Distance (mm) t=0.7
At a distance of approx.
100 mm width is approx. 50 mm.

7
 What sets the LV-S62/LV-S63
apart from conventional
sensors for transparent
object detection?

Beam Shape Area Laser

Area beams are excellent for detecting

targets with gaps.
Unlike small beam spots, area beams are less affected by
vibrating targets or backgrounds.
LV-S63 also spreads the spot’s depth (8 x 12 mm) to provide more
stability.

Small spot Area beam

Large light quantity variation if Small light quantity variation even if
position shifts position shifts

Laser Beam High-frequency superimposition drive circuit

Can stably detect vibrating/inclining

transparent targets Whereas most lasers use
asingle wavelength, the
Due to the characteristics of lasers, the slightest incline of LV-S62/S63 uses high-frequency
superimposition technology to
a transparent target can cause light diffraction resulting in take a wide range of
unstable detection. The newly-developed laser drive wavelengths. This has enabled
the practical elimination of
circuit found in the LV-S62 and LV-S63 compensates for transparent quantity changes.
Reflector
this phenomenon.

Amplifier World's first zero datum function

The amplifier cancels light quantity variation.

The zero datum function always monitors the received
light quantity when there is no transparent object and
keeps the displayed value at 0 (light quantity variation
cancellation). If a transparent object is input, the function
displays the difference. This makes it very easy for the
LV series amplifier to stably detect transparent targets.
(Patent pending)
Amplifier unit
LV-11SB/12SB

8
 Select an LV Series laser sensor

Ask the Expert

Call us for Details on
the LV Series

Step3 Selecting a specific sensor head

Select a sensor head tailored to your application.

STEP 1
If area beam reflective was selected in Step 2

Area Beam Reflective

Type Shape (mm) Detecting Area width (mm) Model Connectable Dimensional
distance (mm) amplifier outline drawing

STEP 2
12.4
35

20 SUPER : 1000
Long Distance TURBO : 500 Approx. 48x0.4
FINE : 250 (at 200 mm distance) LV-H42 P.34
LV-21A
LV-22A
LV-20A
12.4

34.5 55~85 P.19

Approx. 21x0.7 LV-H47 P.33
Definite reflective * Common in all power modes (at 70 mm distance)
26.5

STEP 3
Product features Characteristics figure

STEP 4
Long Distance Characteristics of received light
quantity and distance (typical example)
When the mounting bracket LV-H47 2500
LV-H42 is attached (accessory) Slit (accessory) Lens (sold separately) FINE mode
2000
LV-L01 Received 1500 Rapid increase
light quality 1000 in light quantity
(digit)
Almost no
500 light quantity
Distance
0 20 40 60 80 100 120 140 (mm)
An area width can The area becomes

SPECIFICATIONS
be selected. thicker.
Characteristics of detecting distance
and area width (typical example)
LV-H42 60 When installing
40 No slit a grey slit
20
Width
(mm) 0
Definite Reflective 20
40 When installing
Distance
When the mounting bracket 60 a black slit
LV-H47 is attached (accessory) Slit (accessory) Lens (sold separately) 0 100 200 300 400 500 (mm)

LV-L02 LV-H47 15
When installing
a grey slit
10 No slit
5
DIMENSIONS

Width 0
An area width (mm)
5
can be selected.
The area becomes thicker. 10 When installing
15 a black slit Distance
0 20 40 60 80 100 (mm)

9
 Ask the Expert
Call us for Details on
the LV Series

Step3 Selecting a specific sensor head

Select a sensor head tailored to your application.

If area spot thrubeam was selected in Step 2

Area Spot Thrubeam

Type Detecting Shape (mm) Detecting Area width (mm) Model Connectable Dimensional
width (mm) distance (mm) amplifier outline drawing
34.2 12
20
12
10 41.3 Approx. 12 LV-H100
20

Standard 12
47.4

12
41 LV-51M
30
42.5 2000 Approx. 32 LV-52
41 * Common in all power modes
LV-H300 P.37
P.19

34.2 12
20
High 41.3
12
powered 10 20 Approx. 12 LV-H110

Product features

Standard /High Power (10 mm wide)

When the mounting bracket When the mounting bracket Example using the LV-H110
LV-H100/110 is attached (accessory) is attached (accessory)
LV-H110 is a sensitivity-improved type of LV-H100. LV-H110
LV-B101 LV-B102 detects only workpieces that completely interrupt light.
(Mounted vertical) (Mounted horizontal)

(2 Brackets To 1 Set) (2 Brackets To 1 Set)

OFF: Ignores small workpieces.

Standard (30 mm wide)

ON: Responds to work pieces
When the mounting bracket When the mounting bracket with complete light
LV-H300 is attached (accessory) is attached (accessory) interruption
LV-B301 LV-B302
(Mounted vertical) (Mounted horizontal)

(2 Brackets To 1 Set) (2 Brackets To 1 Set)

Easy optical axis adjustment Mounting brackets provide

via visible beam beam position adjustment.
You can clearly see beam because Two types of mounting brackets
a light diffuser sheet is inserted are available: Brackets for mounting
into the end of the receiver. vertical and brackets for mounting
This makes optical a x i s horizontal. Be sure to use the
adjustment extremely easy. dedicated mounting bracket. Up/Down adjustment possible

10
 Select an LV Series laser sensor

Application

Area spot

STEP 1
Long distance, area detection Area detection, definite-reflective

LV-H47
LV-H42

STEP 2
Envelope printing check Shaft arrival check

Area retro-reflective (wide) Area retro-reflective (long distance)

STEP 3
LV-H65

LV-H64

Sheet break detection Workpiece not inserted properly

STEP 4
Area thrubeam (30 mm wide) Area thrubeam (10 mm wide)

NG OK NG

LV-H300 LV-H100
A B

SPECIFICATIONS

Workpiece location detection Cotton looseness/cut detection

DIMENSIONS

High-power area spot thrubeam High-power area spot thrubeam

LV-H110

LV-H110

Presence/Absence detection of target in bag Seal number counting

11
 Step3 Selecting a specific sensor head
Select a sensor head tailored to your application.

If small beam spot retro-reflective was selected in Step 2

Small Beam Spot Retro-Reflective

Detection Spot diameter Connectable Dimensional
Type Shape (mm) distance (m) (mm) Model amplifier outline drawing

8.5 ULTRA :2 LV-11SB

23
SUPER : 1.5 Approx. ø 2.5
Small TURBO :1 (Up to 0.5m distance) LV-S61 LV-12SB P.29
18 : 0.75
FINE
HSP : 0.5
P.18

12.4
36 Approx. ø 1.5
SUPER : 7
Standard TURBO : 5 (Up to 1 m distance) LV-H62 P.32
23
FINE :2

12.4 LV-21A
36 SUPER : 30 *
Long distance Approx. 50 x 15 LV-22A
(up to 50 m) TURBO : 30 (At 10 m distance) LV-H67 LV-20A P.32
23 FINE : 20
* Use OP-42198: 50m P.19
15.8
46.9
Waterproof: IP67 SUPER : 5 Approx. ø 2
26.6 TURBO : 3.5 (At 2 m distance) LV-H62F P.32
FINE : 1.5

*All models support the P.R.O. function. The polarizing filter reduces direct reflected light from a mirrored-surface work piece.

Difference from fibre sensor

Fibre sensor Laser sensor
Normal through- Narrow-beam through- Straight-beam,
beam type beam type retro-reflective type

Aperture Angle 60°

Reflective
Beam bends behind Difficult to adjust optical axis mirror Solution
The fibre sensor is affected by It is difficult to adjust the optical Optical axis adjustment is easy because
the surrounding environment axis because beam is invisible. the laser sensor is not affected by the
because beam is widely spread. surrounding environment.

Characteristics figure
Characteristics of detecting distance Characteristics of detecting distance
and spot diameter (typical example) and spot diameter (typical example)
LV-S61 4 LV-H62 9
3.5 8
3 7
2.5 6
Spot diameter 2 Spot diameter 5
(mm) (mm) 4
1.5 3
1 2
0.5 1
0 Distance 0 Distance
0 500 1000 1500 2000 (mm) 0 1 2 3 4 5 6 7 8 (m)

12
 Select an LV Series laser sensor

Ask the Expert

Call us for Details on
the LV Series

STEP 1
Product features and mounting brackets

Small Long Distance (up to 50m)

LV-S61 LV-H67

STEP 2
When the mounting bracket When the mounting bracket
is attached (accessory)) is attached (accessory)

STEP 3
Standard Waterproof: IP67
LV-H62 LV-H62F
Fluoroplastic
(PFA)
Glass

Fluorine-contained rubber

STEP 4
When the mounting bracket When the mounting bracket
is attached (accessory) is attached (accessory)

Fluoroplastic
(PFA)

SPECIFICATIONS

Reflector (accessory) Reflector (option)

Type Reflector Type Reflective tape Reflector
OP-51430 OP-95388
Model R-6 R-7 R-8 Model OP-42197 OP-42198
(R-6 grey) (R-2)
Accessory LV-S61 LV-H62 LV-H67 LV-H62F Supported LV-S61/H62 LV-H67
model model
DIMENSIONS

29.4 29.4 51.2 37.4 130

12 25

Shape Shape
45 45 24 45 25
61 150

t=0.7

Dimensions P.29 P.32 P.32 P.33 P.32 Dimensions – P.33

* The detecting distance remains unchanged even if
the reflective tape is used.

13
 Step3 Selecting a specific sensor head
Select a sensor head tailored to your application.

If small beam spot reflective type is selected in Step 2

Small Beam Spot Reflective

Type Shape (mm) Detection distance (mm) Spot diameter (mm) Model Connectable Dimensional
amplifier outline drawing

ULTRA : 500
13 SUPER : 400 Approx. ø1.2
Small TURBO : 300 LV-S41
25 : 200
(Up to 500 mm distance)
FINE
6 : 150 LV-11SB
HSP

6
LV-12SB P.29
13
31.5
ULTRA : 400 P.18
SUPER : 320 Approx. ø1.2
Small side view TURBO : 240 LV-S41L
(Up to 400 mm distance)
FINE : 160
HSP : 120

22 12.4
6.6
Adjustable 33 SUPER : 1000 ø0.8 or less P.33
beam spot TURBO : 500
LV-H32
: 250
(Up to 300 mm distance)
FINE

12.4
36
23
SUPER : 600 Approx. ø2
Coaxial structure
TURBO : 300
LV-H35 P.32
(Up to 600 mm distance) LV-21A
FINE : 150
LV-22A
15.8
LV-20A
46.9
26.6
SUPER : 450
P.19
Waterproof: IP67 Approx. ø2 LV-H35F P.32
TURBO : 200 (Up to 450 mm distance)
FINE : 100

12.4

Ultra-small 34.5 70±15 Approx. 50µm

beam spot LV-H37 P.33
* Common in all power modes (At 70 mm distance)
26.5
10.4
Adjustment range*: LV-11SB
Small adjustable 32 Approx. ø2
distance setting 50 to 200 LV-S31 LV-12SB P.28
(Up to 200mm distance)
* Range in which the reference
distance can be adjusted without
P.18
26.5 reference to the response time

Characteristics figure
Characteristics of detecting distance and Characteristics of setting distance and
minimum spot diameter (typical example) spot diameter (typical example)
LV-H32 0.5 LV-H37 700

0.4 600
500
0.3 Spot diameter 400
Spot diameter
(mm) (µm) 300
0.2
Y
200 X
0.1 X
100
Distance Y Distance
0 0
0 100 200 300 400 (mm) 35 45 55 65 75 85 95 105 (mm)

14
 Select an LV Series laser sensor

Ask the Expert

Call us for Details on
the LV Series

STEP 1
Product features and mounting brackets

Small Small Side-View

When the mounting
LV-S41 (S41L) bracket is attached LV-S41L When the mounting bracket is attached
L-shape Front mounting of Rear mounting of
mounting bracket accessory accessory
OP-66846

STEP 2
(Sold separately)

L-shape mounting bracket

Accessory OP-66846
(Sold separately)

Adjustable Beam Spot

When the mounting bracket
LV-H32 is attached (accessory) Adjustable by hand

STEP 3
Spot adjustment can be easily made
by turning the focus ring by hand.
Also lockable
It is safe because
of the lens position
lock feature.

Coaxial Structure

STEP 4
When the mounting bracket
LV-H35 is attached (accessory) Coaxial Example
structure With the coaxial
structure, the LV-H35 can
Light
transmitter receive reflected light
Light
even from a small gap.
receiver

Without grease With grease

Front view

Waterproof: IP67 SPECIFICATIONS

When the mounting bracket
LV-H35F is attached (accessory) Material

Fluoroplastic
(PFA)
Glass
Fluorine-contained rubber
DIMENSIONS

Ultra-small Beam Spot (50μm) Small Adjustable Distance Setting

When the mounting bracket When the mounting bracket
LV-H37 is attached (accessory) The supplied magnifying
LV-S31 is attached (accessory)
glass enables users to check
the beam spot position.

15
 Ask the Expert
Call us for Details on
the LV Series

Step3 Selecting a specific sensor head

Select a sensor head tailored to your application.

If small beam spot thrubeam type is selected in Step 2

Small Beam Spot Thrubeam

Type Shape (mm) Detection distance (mm) Spot diameter (mm) Model Connectable Dimensional
amplifier outline drawing

M6
500mm Approx. ø1.2
Small beam spot (Up to 500 mm distance) LV-S71
* in all power modes
30.2 LV-11SB
LV-12SB P.30
P.18
500mm Approx. ø6
Step differentiation M6 (At 500 mm distance) LV-S72
* in all power modes
30.2

Product features

Small Beam Spot

LV-S71 Operation indicator Standard mounting bracket
Both the transmitter and (accessory)
Ultra-small World’s Smallest
receiver are equipped with
LV-S71 is the smallest red the operation indicator.
laser sensor in its class. Receiver

Small type mounting bracket

(option)
Transmitter OP-66869

Step Differentiation
LV-S72
The optical axis can be adjusted from above.
High-precision differentiation Receiver Each symmetrical mounting bracket (two sets)
The receiver side uses a slit with
a width of 0.6 mm, allowing
high-precision differentiation. Side viewer attachment
(option)
LV-F1

Easy optical axis adjustment

Optical axis adjustment is easy because
the spot diameter is approx. 6 mm at 500 mm
ahead of the transmitter (large spot).
The optical axis can be adjusted from above.
Transmitter
(2 Brackets To 1 Set)

16
 Select an LV Series laser sensor

Application

Small beam spot

STEP 1
Small beam spot reflection (adjustable beam spot) Small beam spot reflection (side view)

LV-H32

STEP 2
LV-S41L

Detection of the presence/

absence of a part (spot welding) Rack stop position detection

Small beam spot reflective (coaxial structure) Small beam spot reflective (distance setting)

STEP 3
LV-S31

LV-H35

Glass detection Counter input

STEP 4
Small beam spot retro-reflective (small) Small beam spot retro-reflective (long distance)

SPECIFICATIONS
LV-S61

LV-H67

Detection of work pieces remaining in the mold. Protrusion detection

DIMENSIONS

Small beam spot thrubeam (small, M6) Small beam spot thrubeam (small, M6)

LV-S71

LV-S71
OK

NG

Floating cover detection De-burr checking

17
 Step4 Selecting an amplifier
When using one amplifier, select the main unit. When using two or more amplifiers,
select one main unit and one or more expansion units.

If the LV-S series is selected in Step 3

LV-S Series The main unit comes with an amplifier mounting bracket.
The expansion unit comes with an end unit.

Model
Type Shape (mm) Number of External input* Dimensions
ON/OFF outputs NPN output PNP output
9
78.6
Main unit 31.5
2 1 LV-11SB LV-11SBP

P.31
Main unit
Expansion 2 1 LV-12SB LV-12SBP
unit Expansion unit

* For external input, select "light emission stop", "tuning", "set value bank selection" or "received light quantity shift."
Up to 16 expansion units can be installed to one main unit.

Connectable sensor heads Reflective LV-S41, LV-S41L, LV-S31

Retro-Reflective LV-S61, LV-S62, LV-S63
Thrubeam LV-S71, LV-S72

Part names and features

The LV-S series comes
with the world's first
zero datum function.
Unique form dust cover Usually* the first digit of the digital display
will drift when there is no workpiece.
The zero datum function* clears the
display to 0, eliminating this drifting
status. (Returning to the nominal display
when light is interrupted)
Easily adjustable large
manual button
Monitor that can set or show Normal Zero datum
current light intensity values
(5-digit or 4-digit display)

Clearly visible bright solid

operation indicator 2 outputs x 2 banks
(4 outputs total) (Patent pending)

Easy connection [Supplement]

connector method
Heat sink for stable operation Datum means reference. Zero datum
is a function that changes the light
quantity display to 0 when there is on
Quick SET button work piece at 0 reference.
*When the retro-reflective type or
thrubeam type is used

Secure head connection

Popular DSC function
The LV-S series comes with the DSC function.

18
 Select an LV Series laser sensor

Ask the Expert

Call us for Details on
the LV Series

STEP 1
If the LV-H series is selected in Step 3

LV-H Series
Reflective or Retro-Reflective The main unit comes with an amplifier mounting bracket.
The expansion unit comes with an end unit.

Number of External Laser emission2 Analog Model

Type*1 Shape (mm) ON/OFF calibration Dimensions
stop input * output NPN output PNP output

STEP 2
outputs input *2
20
65.8
Main unit 28.5
2 1 1 0 LV-21A LV-21AP

P.36
Main unit
Expansion 2 0 0 0 LV-22A LV-22AP
unit Expansion unit

*1. The LV-20A is also available to supports the zero line. (It does NOT have a cable for power or outputs).
*2 external inputs on the expansion units can be used for calibration. However, laser emission stop input cannot be used on the expansion units.
Up to seven additional expansion units can be installed for each main unit.

STEP 3
Connectable sensor heads Reflective LV-H32, LV-H35, LV-H35F, LV-H37, LV-H42, LV-H47
Retro-Reflective LV-H62, LV-H67, LV-H62F, LV-H64, LV-H65

Amplifier unit for invisible infrared LV-H41 The amplifier unit comes with the amplifier mounting bracket.

Number of External Laser emission Analog Model

Type Shape (mm) ON/OFF calibration stop input output Dimensions
outputs input NPN output

STEP 4
20
65.8
28.5
Main unit 2 1 1 0 LV-11A P.36
Main unit

(Note) Only the LV-H41 and LV-H51 can be used with the LV-11A amplifier.

SPECIFICATIONS
LV-H Series Thrubeam The main unit comes with an amplifier mounting bracket.
The expansion unit comes with an end unit.

Number of External Laser emission Analog Model

Type Shape (mm) ON/OFF calibration stop input *1 output NPN output PNP output Dimensions
outputs input
20
74.6
Main unit 28.7 2 0 1 1 LV-51M LV-51MP
DIMENSIONS

P.39
Expansion Main unit
2 0 0 0 LV-52 LV-52P
unit
Expansion unit

*1. Laser emission stop input on the main unit only.

Up to seven additional expansion units can be installed for each main unit.

Connectable sensor heads Through-beam type LV-H100, LV-H300, LV-H110

19
 LV-S Series

Specifications

Straight-Beam, Retro-Reflective Reflective

Type Small beam spot Area beam Long-distance Type Small Small side view Adjustable distance
transparent object definite reflective
Model LV-S61 LV-S62 LV-S63 Model LV-S41 LV-S41L LV-S31

Shape Shape

Light source Visible light semiconductor laser Light source Visible light semiconductor laser
Detecting distance*

Detecting distance
ULTRA 2m 10m (5m) 30m ULTRA 500mm 400mm
SUPER 1.5m 8m (3.5m) 25m SUPER 400mm 320mm
TURBO 1m 5m (2m) 15m TURBO 300mm 240mm 50~200mm
(adjustment range)
FINE 0.75m 2.5m (0.7m) 8m FINE 200mm 160mm
HSP 0.5m – – HSP 150mm 120mm
Ambient Ambient
temperature used –10 to +50°C temperature used –10 to +50°C 0 to 50°C
Case Glass reinforced plastic Case Glass reinforced plastic
Material

Material

Lens cover Acrylic Lens cover Acrylic

Reflective Polycarbonate, acrylic Reflective Polycarbonate, acrylic
mirror mirror
Weight Approx. 70 g Approx. 65 g Approx. 110 g Weight Approx. 70 g Approx. 75 g
Dimensions P.29 P.25 P.26 Dimensions P.28 P.29 P.38
* The parentheses indicate the detecting distance when the small beam spot is used.

Thrubeam
Type Small standard Small (with slit) Side-view attachment Compact mounting
Type Type bracket
for thrubeam for thrubeam
Model LV-S71 LV-S72
Model LV-F1 Model OP-66869

Shape
Shape Shape

Light source Visible light semiconductor laser

Detecting distance

ULTRA Applicable head LV-S71 LV-S72 Applicable head LV-S71 LV-S72

SUPER
Detecting distance

Detecting distance

ULTRA ULTRA
TURBO 500mm SUPER SUPER
FINE TURBO 250mm 400mm TURBO 500mm
HSP FINE FINE
Ambient
temperature used –10 to +50°C HSP HSP
Case Glass reinforced plastic Ambient –10 to +50°C Ambient –10 to +50°C
Material

temperature (No condensation) temperature (No condensation)

Lens cover Acrylic used used
Reflective Polycarbonate, acrylic
mirror Material Metal part: Stainless steel Material Metal part: Stainless steel
Mirror part: Glass
Weight Approx. 70 g
10 to 55 Hz, double amplitude: 10 to 55 Hz, double amplitude:
Dimensions P.30 P.30 Vibration 1.5 mm, 2 hours in each of Vibration 1.5 mm, 2 hours in each of
X, Y and Z axis directions X, Y and Z axis directions
Weight Approx. 22 g Weight Approx. 14 g
Dimensions P.30 Dimensions P.30
Contains a symmetrical mounting Contains a symmetrical mounting
bracket (two in total). bracket (two in total).

Laser specifications
Sensor head LV-S31/S41/S41L/S61/S71/S72 LV-S62/S63
Wavelength 655nm 660nm
Output 290µW 290µW
FDA class* Class 1
IEC class Class 1
JIS class Class 1
* IEC60825-1 based classification is made according to FDA (CDRH) Laser Notice No. 50 Regulations.

20
 Specifications

LV-S Series

Amplifier

STEP 1
Type Main unit Expansion unit (1 line)

1
NPN output LV-11SB LV-12SB
Model*
PNP output LV-11SBP LV-12SBP

Shape

Except

STEP 2
HSP: 80 µs FINE: 250 µs TURBO: 500 µs SUPER: 2 ms ULTRA: 4ms
LV-S31 (LV-S62 and LV-S63 cannot select HSPmode.)

Response LV-S31 SPED 1:500 µs SPED 2:2ms SPED 3:8ms SPED 4:32ms
time standard mode
LV-S31 250 µs
high-speed mode
Control output NPN(PNP) open-collector x 2 ch 40 VDC (30 V) or lower 100 mA max. per output
Control input Light emission stop input, external calibration, set value bank selection input, or shift input

Power mode Number of units

STEP 3
Number of interference HSP None
preventive units*2 FINE/TURBO 2 units
SUPER/ULTRA 4 units

Expansion of unit*3 Up to 16 expansion units can be installed (17 units including the main unit)

Power supply 12 to 24 VDC ripple (P-P) 10% max. Class 2

voltage*4
Rating Normal 1.5 W max. (62.5 mA max. for 24 V)
Power consumption Eco Half
1.35 max. (57.3 mA max. for 24 V)
Eco All
Ambient temperature used* 3
–10 to +50°C (No condensation)

STEP 4
Vibration 10 to 55 Hz, 1.5-mm double amplitude, 2 hours for each X, Y, and Z axis
Material Main body, cover: Polycarbonate
Weight (including 2-m cable) Approx. 80 g
Dimensions P.31
*1. LV-S62 and LV-S63 can ONLY be used with amplifiers ending with B or BP.
*2. Numbers for the LV-S31 are four in standard mode and two in high-speed mode.
*3. To connect several units they must be mounted on a METAL DIN rail. Ensure that the output current is 20mA max. With several units connected, the allowable
ambient temperature range varies as follows:

SPECIFICATIONS
1 to 2 units conneted: -10 to +55°C
3 to 10 units conneted: -10 to +50°C
11 to 16 units conneted: -10 to +45°C
*4. When more than 8 units connected, be sure to use supply voltage 24 VDC Ripple (P-P) 10% max.

Input/Output Circuits
DIMENSIONS

Output circuit Input circuit

Laser emission stop input/External calibration input/Setting value bank selection
input/Received light intensity shift input
LV-11SB/12SB LV-11SB/12SB LV-11SB/12SB LV-11SBP/12SBP
Brown*1 Brown*1 12 to 24 VDC
12 to 24 VDC 12 to 24 VDC 3.3 VDC
Brown*1
Black/white*2
Overcurrent protection

Overcurrent protection

Load 5 to 40 VDC PLC, etc.

Main circuit

Main circuit

Main circuit

Main circuit
circuit

circuit

Pink
Black/white*2 Pink
PLC, etc.
Load
Blue*1 Blue*1 0V
0V 0V (Short-circuit current: Blue*1 (Short-circuit current:
1 mA or lower) 2 mA or lower)
*1. The LV-11SB only *1. The LV-11SBP only * The LV-11SB only * The LV-11SBP only
*2. Black: Control output 1, white: Control output 2 *2. Black: Control output 1, white: Control output 2

21
 LV-H Series

Straight-Beam, Retro-Reflective Small Beam Spot

Type Small beam spot High power Type Straight-beam Adjustable Ultra-small
coaxial beam spot beam spot
Model LV-H62 LV-H67 Model LV-H35 LV-H32 LV-H37

Shape Shape

FDA class Class FDA class Class

I EC class Class 2 I EC class Class 2
Light source Visible light semiconductor laser Wavelength: 660 nm Light source Visible light semiconductor laser Wavelength: 660 nm
FINE 2m 20m FINE 150mm 250mm
Detecting TURBO 5m 30m Detecting TURBO 300mm 500mm 70±15mm
distance distance
SUPER 7m 30m*1 SUPER 600mm 1000mm
Ambient temperature used –10 to +55ºC (No condensation) Ambient temperature used –10 to +55ºC (No condensation)
Case Glass reinforced plastic Ambient humidity used 35% to 85% RH (No condensation)
Material Lens cover Transparent plastic*2 Case Glass reinforced plastic*1
Material
Reflective mirror Polycarbonate, Acrylic ABS plastic, Acrylic Lens cover Transparent plastic Acrylic*2 Glass*2
Weight Approx. 45 g Weight Approx. 45 g
Dimensions P.32 Dimensions P.32 P.33
*1 The detecting distance is 50 m when OP-42198 is used. *1 Norbornene plastic or acrylic
*2 Norbornene plastic or acrylic *2 The LV-H32 and the LV-H37 receivers are polyarylate
Area Beam, Retro-Reflective Waterproof (IP67)
Type Long distance Wide Type Straight-beam Retro-reflective
coaxial
Model LV-H64 LV-H65 Model LV-H35F LV-H62F

Shape Shape

FDA class Class FDA class Class

I EC class Class 2 I EC class Class 2
Light source Visible light semiconductor laser Wavelength: 660 nm Light source Visible light semiconductor laser Wavelength: 660 nm
FINE 100 to 500 mm (100 to 700 mm) 100mm (150 mm) FINE 100 mm 1.5 m
Detecting TURBO 200 to 850 mm (300 to 1000 mm) 10 to 150 mm (10 to 250 mm) Detecting TURBO 200 mm 3.5 m
distance distance
SUPER 400 to 1200 mm (600 to 1500 mm) 100 to 200 mm (150 to 350 mm) SUPER 450 mm 5m
Ambient temperature used –10 to +55ºC (No condensation) Ambient temperature used –10 to +55ºC (No condensation)
Case Reinforced glass/plastic Ambient humidity used 35% to 85% RH (No condensation)
Material Lens Norbornene plastic Case Fluoroplastic (PFA)
Reflective mirror Polycarbonate, acrylic Material O-ring Fluororubber
Weight Approx. 45 g Lens cover Glass
Dimensions P.35 Weight Approx. 80 g Approx. 100 g
* The parentheses indicate the detecting distance when OP-51428 is used. Dimensions P.32
* The cable minimum bend radius is 25mm.
Area Beam
Type Area definite reflective Long-distance area
Model LV-H47 LV-H42 LV-H41

Shape

FDA class Class Class

IEC class Class 2 Class 1
Light source Visible light semiconductor laser Wavelength: 660 nm Invisible light semiconductor laser Wavelength: 785 nm
FINE 250mm
Detecting TURBO 55~85mm
distance 500mm
SUPER 1000mm
Ambient temperature used –10 to +55ºC (No condensation)
Ambient humidity used 35% to 85% RH (No condensation)
Case Glass reinforced plastic
Material
Lens cover Glass*1 Polyarylate
Weight Approx. 45 g
Dimensions P.35
*1. The receiver is polyarylate.

22
 Specifications

LV-H Series

Amplifier Specifications (for reflective/retro-reflective sensor heads)

STEP 1
NPN Output LV-21A LV-22A LV-20A LV-11A(dedicated to LV-H41)
Model
PNP Output LV-21AP LV-22AP

Shape

Main unit / Expansion unit Main unit Expansion unit (1 line) Expansion unit (0 line) Main unit
FINE: 500 µs/ TURBO: 2 ms/
Response speed FINE: 80 µs/ TURBO: 500 µs/ SUPER TURBO: 4 ms 280 µs to 4.7 ms
SUPER TURBO: 8 ms
Control output NPN (PNP) open-collector x 2 channels, 40 VDC (30 V) max., max. 100 mA, residual voltage (1.0 V max.)

STEP 2
Protection circuit Reverse polarity protection, overcurrent protection, surge absorption
Expansion of units Up to 7 additional expansion units can be installed (8 units including the main unit),

Number of interference Power mode FINE TURBO SUPER

preventive units*1 Number of units None 2 units 4 units

Power supply voltage 12 to 24 VDC ripple (P-P) 10% max. (For the LV-20A/22A/22AP, the power supply voltage is supplied from the main unit.)
Rating
Power consumption 1.5 W max. (125 mA max. for 12 V, 62.5 mA max. for 24 V)
Ambient temperature used –10 to +55ºC (No condensation)*2
Ambient humidity used 35% to 85% RH (No condensation)

STEP 3
Material Main body, cover: Polycarbonate
Weight Approx. 120 g Approx. 75 g
Dimensions P.36
* 1 To connect several units they must be mounted on a METAL DIN rail. Ensure that the output current is 20 mA max. With several units connected, the allowable ambient
temperature range varies as follows:
* 2 When 2 to 5 expansion units are additionally installed: -10 to +50 . When 6 or 7 expansion units are additionally installed: -10 to +45 .

LV-L01 Specifications (lens attachment for LV-H42) (Unit: mm)

Name LV-L01 When slit 1 is mounted When slit 2 is mounted When slit 3 is mounted When slit 4 is mounted

STEP 4
FINE 200 175 150 125 100
Detecting 400 350 300 250 200
distance TURBO
SUPER 800 700 600 500 400
50 mm 2.6
Area thickness 100 mm 4.0
150 mm 5.5
50 mm 15.0 11.5 9.5 7.5 5.5
Area width 100 mm 26.0 20.0 17.0 13.0 10.0
150 mm 37.0 29.0 24.0 19.0 14.0

SPECIFICATIONS
Case material Polyacetal (main body) Arton (lens)
Weight Approx. 1 g
Dimensions P.34

Typical example of "width x thickness" of area in LV-L01 detecting distance (Unit: mm)
Distance LV-H42 LV-H42 + black slit LV-H42 + grey slit LV-L01 L01+ slit 1 L01+ slit 2 L01+ slit 3 L01+ slit 4
100 26 x 0.6 13 x 0.6 5 x 0.6 27 x 4 20 x 4 17 x 4 13 x 4 10 x 4
200 48 x 0.4 25 x 0.4 9 x 0.4 49 x 7 38 x 7 32 x 7 25 x 7 19 x 7
300 70 x 0.8 36 x 0.8 13 x 0.8 72 x 10 56 x 10 47 x 10 36 x 10 27 x 10
400 92 x 1.34 48 x 1.34 17 x 1.34 94 x 13 73 x 13 61 x 13 48 x 13 36 x 13
DIMENSIONS

LV-L02 Specifications (lens attachment for LV-H47) (Unit: mm)

Name LV-L02 When slit 1 is mounted When slit 2 is mounted When slit 3 is mounted When slit 4 is mounted
55 mm 3.0
Area thickness 70 mm 3.4
85 mm 3.8
55 mm 17.0 13.0 11.0 8.5 6.0
Area width 70 mm 20.5 15.5 13.0 10.0 7.5
85 mm 24.0 18.0 15.0 11.5 9.0
Case material Polyacetal (main body) Arton (lens)
Weight Approx. 1 g
Dimensions P.34

23
 LV-H Series

Thrubeam
Area thrubeam
Type
High power High performance
Model LV-H110 LV-H100 LV-H300

Shape

Detecting area 10 mm 30 mm
FDA class Class
IEC class Class 2
Light source Visible light semiconductor laser Wavelength: 660 nm
Detecting distance 2000 mm
Ambient temperature used –10 to +55ºC (No condensation)
Ambient humidity used 35% to 85% RH (No condensation)
Case Glass reinforced plastic
Material
Lens cover Transmitter: Glass Receiver: Polyarylate
Weight Approx. 80 g Approx. 100 g
Dimensions P.37
* Use a dedicated mounting bracket to install the sensor.

Amplifier Specifications
NPN Output LV-51M LV-52
Model
PNP Output LV-51MP LV-52P
Main unit / Expansion unit Main unit Expansion unit (1 line)

Shape

FINE TURBO SUPER

Response speed
80 µs 500 µs 4 ms
Inspection mode Light intensity distinction / edge detection
Control output NPN (PNP) open-collector x 2 channels, 40 VDC (30 V) or lower, max. 100 mA, residual voltage (1.0 V or lower)
Monitor output 1 - 4 V for 1 - 4 V voltage output and FINE display 0 - 3000, load resistance 20 kΩ or higher (LV-51M/LV-51MP only)
Protection circuit Reverse polarity protection, overcurrent protection, surge absorption
Expansion of units Up to 7 additional expansion units can be installed (8 units including the main unit),
Number of interference FINE: No device (0) TURBO: 2 units SUPER: 4 units
preventive units*1
Power supply voltage 12 to 24 VDC ripple (P-P) 10% max. (For the LV-52/52P, the power supply voltage is supplied from the main unit.)
Rating
Power consumption 1.5 W max. (125 mA max. for 12 V, 62.5 mA max. for 24 V)
Ambient temperature used –10 to +55ºC (No condensation)*1
Ambient humidity used 35% to 85% RH (No condensation)
Material Main body, cover: Polycarbonate
Weight Approx. 120 g Approx. 75 g
Dimensions P.39
*1 To connect several units they must be mounted on a METAL DIN rail. Ensure that the output current is 20 mA max. With several units connected, the allowable ambient
temperature range varies as follows:
When 2 to 5 expansion units are additionally installed: -10ºC to +50ºC.
When 6 or 7 expansion units are additionally installed: -10ºC to +45ºC.

24
 Specifications / Dimensions

LV-H / LV-S Series

Input/Output Circuits

STEP 1
Laser emission interruption (main unit only)
External calibration input
NPN NPN NPN PNP 12 to 24 VDC
LV-21A/11A/51M LV-22A/52 LV-21A/11A/51M LV-21AP/51MP
Brown
12 to 24 VDC Black 5 VDC
Black Load 5 to 40 VDC
protection circuit

Load 5 to 40 VDC Brown

(Control output A)

protection circuit
Overcurrent

(Control output A)

Main circuit

Main circuit
Main circuit
Main circuit

Overcurrent
White Load White
5 to 40 VDC
(Control output B) Load 5 to 40 VDC Pink or Purple Pink or Purple
(Control output B)
Purple (Laser radiation interruption input)
Pink (external turning input)*
(Short-circuit current: Blue (Short-circuit current:

STEP 2
0V 1 mA max.) 2 mA max.)
Blue

* Orange (monitor output) only for LV-51M

PNP PNP
LV-21AP/51MP LV-22AP/52P Analogue output circuit diagram for monitor
Brown
12 to 24VDC 12 to 24VDC (LV-51M/51MP only)
protection circuit

Black (Control output A)

protection circuit
Overcurrent

Main circuit
Main circuit

Overcurrent

Load Black protection Orange

White (Control output B) Load circuit Monitor ouput

Main circuit
Load (Control output A) (1 to 4 V)
Purple (Laser radiation interruption input) White
Load Blue
Pink (external turning input)*
(Control output B) 0V
0V

STEP 3
Blue

* Orange (monitor output) only for LV-51MP

Dimensions Unit: mm

STEP 4
LV-S62
13.6

19
7.4 Centre of emitted/
18 received light ø2 3
4.2 1.4 3
9

7 4.2
21.5 17.1 20 20
12
35 3 38 41

SPECIFICATIONS
10
ø3.2
Spot switching slider
2- ø3.2

Indicator 3 5.8 3
2.2 9 11.9
2 x ø 2.5, 2-core shielded,
Cable length: 2 m

4.2

Reflector R-6L (LV-S62 accessory)

DIMENSIONS

5.5 45
8
1.3 23

14.7
29.4 8 23

2- ø3.2
37

CAD DATA Download Service www.keyence.com/cad

25
 LV-S Series

OP-84350
L-shape mounting bracket for LV-S62 (Option)
8 4 3.4 M3
3.4
16 6

4 5 5
6
11
Material: Stainless steel
13.5 2- ø 2 t=1.5
Accessory screw
M3, P=0.5× 7.3…1piece
4-R1.7 Material: Stainless steel

52.5 49.5

32.5
25 8

5
6.5 Material: Stainless steel
8 t=1.5
12
15
20

Mounting bracket
attached

19 0.9 0.9 19
34
25

Centre of emitted/
received light

48.3 (52.5) Centre of emitted/

received light 43

14.5
5 9.2
25
34

OP-84349
Rear mounting bracket for the LV-S62 (Option)

13

4-M3 screw
19.5

4-M3
3.5 21.2
26.2 29.2
Material: Stainless steel
60.7 51 t=1.5
16
Accessory screws
10 M3, P=0.5× 5···1 piece
6 Material: Stainless steel
4-R1.75 M3, P=0.5× 16.5···1 piece
Material: Stainless steel
4.5 M3, P=0.5× 18···2 pieces
9 (20.3) Material: Stainless steel

Accessory nut
12 (23.5) M3···1 piece
24 Material: Stainless steel
31
40

Mounting bracket
attached

(23.3) Center of emitted/

Center of received light 6.7
15.5 emitted/ 19.7
received
13.4 light

12.8
18.8

26
 Dimensions

LV-S Series

Unit: mm

STEP 1
OP-84351
Side mounting bracket for LV-S62 (Option)
4 15 Material: Stainless steel
3.5 3.4 4 t=1.5
4
5.3 Accessory screws
M3, P=0.5× 16.5…1piece
3.5 4.5 3.4 Material: Stainless steel
M3, P=0.5× 18…2piece
30 Material: Stainless steel
11.5
10 10 (25.2) M3 screw Accessory nut
M3…1 piece
Material: Stainless steel

STEP 2
(30.9) (25.7) 12 4-M3
15

(10.7) (24)

31.8
Mounting bracket
attached
18.3 21.9

Centre of emitted/

STEP 3
Centre of emitted/ received light
41 received light

25.7
13.8 16.7
6.7
5.8 27
10 (28.4)

LV-S63 Reflector R-9

(LV-S63 accessory)

STEP 4
21.8
5.4
86.4
8.2 56
64 11
Centre of emitted/ 8 Indicator
10.4 3- ø4.3
received light

8.8 7 38
31
25 8 25.3
44 36 76 11 56
32.4
23

SPECIFICATIONS
2.2 16.4 4 29 2- ø4.3
46.8
2.8 75.4
2 x ø2.5, 2-core shielded,
Cable length:2m

Rear mounting bracket for LV-S63 (Accessory) Mounting bracket

19.4 attached
9 4.3 Material: Stainless steel
DIMENSIONS

t=2.0
4.3
13 Accessory screws 24.9
M4, P=0.7× 30…3piece
8 Material: Stainless steel Centre of emitted/
7 received light
19 17 Accessory nut
M4…3 piece
8 31 Material: Stainless steel

36 4-R2.25
55 53
23 Centre of emitted/
10° 10° received light
9 28
13

16.6 ø4.3 3.4 12.4 33.5

48.1
55 22

CAD DATA Download Service www.keyence.com/cad

27
 LV-S Series

LV-S31
Centre of Distance setting
emitted light indicator Operation indicator
10.4 7.8
3

21 32 Distance setting
21.3 trimmer

Centre of
received light
3 14.3 2- ø3.2 2 x ø2.5, 2-core shielded,
26.5 Cable length: 2m

L-shape mounting bracket for LV-S31 (Accessory)

5

Material: Stainless steel

t=1.5

10 4 3.5
4 24
6.5
22
R1

.5 Material: Stainless steel

2- ø3 t=1.2 31.6 25.6

* Accessory screws
…
M3, P=0.5× 15 2piece
R1

Material: Iron (nickel-plated)

.8

32 35.5
2-M3, P=0.5
6
R2
7.
12.1 4

10.2
R2

28
3.9

14.5
LV-S41
6 4.5 5.8
Centre of 3.3 20.5 Indicator
emitted light

8.3
10 13
9 10
Centre of
received light
5 25
27 1 2
28 2 x ø 2.5, 2 -core shielded,
Cable length: 2m

Mounting bracket for LV-S41/LV-S41L (Accessory)

21.5
10.4
3.7
4
3.2

16 12.5 3.5
10.5
Installed bracket Installed bracket Material: Stainless steel
on the LV-S41 on the LV-S41L 3.2 t=0.6
3
5
8
14.5 6.5

6.7 6.2
2
12.8
22.7

28
 Dimensions

LV-S Series

Unit: mm

LV-S41L 6 4.5 5.8

STEP 1
Centre of 27
emitted light 3.7
Indicator

13 9.7 9 10
4.7

1.3 1 2
4.8
Centre of
received light 31.5 2 x ø2.5, 2 -core shielded,
34.5 Cable length: 2m

STEP 2
OP-66846
L-shape mounting bracket for LV-S41/LV-S41L (Option)
3.5

8
Material: Stainless steel
t=1.0
5 3.5
4 7 14
Installed bracket Installed bracket
on the LV-S41 on the LV-S41L 7 7

7
* Accessory screws
…
and nuts
3 M3, P=0.5× 7 2piece

STEP 3
Material: Iron (nickel-plated)
7
32
3

3.5

29 14.5

LV-S61 OP-51430 R-6 (Grey) (Accessory)

23 Centre of 5.5
Indicator 2.8 45 4.2

STEP 4
19.5 emitted light
8.5 3.5 1.3 23 8
18.8

14.7
29.4 8 23
3.9 3
15.3 2.1 18
8.9
2-ø3.2
37
Material: Acrylic, polycarbonate
5 2.1 3.5
19.3

SPECIFICATIONS
2 x ø 2.5, 2-core shielded, 2-ø2.2
Cable length:2m
25
L-shape mounting bracket for LV-S61 (Accessory) 20
9.9
7.9 8

6- 4.5
R1 4- 2.9 Material: Stainless steel
.2 R2
t=1.0
3-ø2.3

9.9 7.9 27 19.2 18.3 7.9 9.9

24 24
20
DIMENSIONS

11.1

18.3
2- 19.2
R2
3.5 ) Material: Stainless steel
.75 t=1.2
R1
(4-

14.5 5
8.5 24.8 20.8

3.5
4
12.5 * Accessory screws
…
M2, P=0.4× 12 2piece
Material: Iron (nickel-plated)
10 4 2-M2, P=0.4 4

CAD DATA Download Service www.keyence.com/cad

29
 LV-S Series

LV-S71 LV-S72 30.2

30.2 ø2.5, 2-core shielded cable
Transmitter side ø3.2 12 Transmitter side ø 3.2 12 7 ø2.5, 2 -core shielded cable
7
Lens diameter Cable length: 2m Lens diameter Cable length: 2m

6 6

Across-flat Indicator Across-flat Indicator

10 thickness 2 10 thickness 2
M6, P=0.75 M6, P=0.75
Stainless steel Stainless steel
30.2 31.9
Receiver side ø4.4 ø2.5, 2-core shielded cable Receiver side ø0.6 13.7 ø2.5, 2-core shielded cable
12 7 7
Lens diameter Cable length: 2m Lens diameter Cable length: 2m

6 6

Across-flat Indicator Across-flat Indicator

10 thickness 2 10 thickness 2
M6, P=0.75 M6, P=0.75
Stainless steel Stainless steel

Mounting bracket for LV-S71 / LV-S72 (Accessory)

5 2-slot
4.3 ø6.1

M4 screw
2 8.5 23.5
18 25 18
8.5

21.5 Material: Stainless steel

2 4.3 t=1.5
5

LV-F1 13.2 13.2

7.2 7.2

9.2 9.2

ø6.1 ø6.1

10.9 10.9
A-A A-A
Material: Stainless steel Material: Stainless steel
16 t=1.2 t=1.2 16
16.3 16.3
13.1 13.1

45˚ 45˚
A A A A
3.2 (16.4) (16.4) 3.2
40.4 40.4

15.2 15.8 20.9 20.9 15.8 15.2

9.5 9.5

3.2 3.5 M2.6 screw M2.6 screw 3.5 3.2

2.2 2.2
8.1 12 12 8.1
1
M2.6, P=0.45× 6 screws and nuts attached
Material: Stainless steel

OP-66869
Compact mounting bracket for thrubeam (Option)
13.2 13.2
7.2 7.2

9.2 9.2

ø6.1 ø6.1
16 10.9 10.9 16
13.1 13.1
Material: Stainless steel Material: Stainless steel
3.2 (16.4) t=1.2 t=1.2 (16.4) 3.2

19 21.2 20.9 20.9 21.2 19

15.2 15.8 15.8 15.2
9.5 9.5

3.2 3.2
3.5 M2.6 screw M2.6 screw 3.5
12 12
8.1
8.1
M2.6, P=0.45× 6 screws and nuts attached
Material: Stainless steel 1

30
 Dimensions

LV-S Series

Unit: mm

LV-11SB/11SBP

STEP 1
ø3.9, 5-core x Brown/Blue: 0.34 mm
2

Black/White/Pink: 0.18 mm2

Cable length: 2m

9
107
(Maximum MAX170˚
6.9
when the
cover is
opened)

31.5
(36.2)

STEP 2
(13)

29.5 35.4
Minimum
78.6 8

Mounting bracket attached (LV-11SB and LV-11SBP DIN rail accessory)

Rear of mounting bracket

29.7 2- (4.4 x 3.4)

STEP 3
(37.7) Spot facing: ø7 d= 4
(8.2)
9

31.7 15
3.8 2- ø3.4
31
34.5 25.4 Spot facing: ø6 d= 2.7

LV-12SB/12SBP

STEP 4
ø3.9, 3-core x Black/White/Pink: 0.18 mm2
Cable length: 2m

107
(Maximum 6.9
when the
cover is
opened)

31.5
(36.2)

SPECIFICATIONS
(13)

29.5 35.4
Minimum
78.6 7

End unit (included with LV-12SB/LV-12SBP)

When several units are connected

6

DIN-rail mounting
DIMENSIONS

End unit End unit

* Make sure to use end units when
(22.6) 20.8 adding expansion units.

No. of No. of
9.2 35.4 expansion expansion
units L units L
53.8
1 18 9 90
2 27 10 99
3 36 11 108
4 45 12 117
5 54 13 126
6 63 14 135
7 72 15 144
8 81 16 153

CAD DATA Download Service www.keyence.com/cad

31
 LV-H Series

LV-H series reflective/retro-reflective

LV-H35F/H62F Mounting bracket (Accessory)
Indicator 52.7
36.5 8.2
4
10 7
15.5
8-R 1.75
5 * Accessory screws
14.5
Centre of emitted/ 51.7 6.3 M3×22…2 pieces
15.8 received light
46.9 8 6 1.5
8.6 44.8
3.2 44.3 Minimum bend radius 1.2 10.5 43.8 2- ø3.5
25mm
28.6 26.6 10.5
7.8 5.1 8.7
3.2
46 5.1 51 45
10.9
22.2
2- ø3.2 mounting hole 5.1
10.5
5.0 x 3.2 elliptic fluoroplastic sheathed 14.5 43.8 2-M3, P=0.5
2 x 1-core shielded, Cable length:2 m 6-R1.75 44.8
Material: Stainless steel Material: Stainless steel
t=1.2 t=1.5

Reflector R-8 for LV-H62F (Accessory)

Mounting bracket attached
(2.2)
6.8 7.7
9.4
45
29 15.9 14.2
24
5
18.7 5
24 29 6.5
37.4
2-M3×22

37 2- ø3.2

37
19

LV-H35/H62/H67 Mounting bracket (Accessory)

Indicator 25
12.5 4-R1.75
12
8
Centre of 36 5
12.4 emitted/ 4
received light 23.5 9.5 3 10 4
10.5 2- ø3.5
6.6
8.4 * Accessory screws
23 17 4 3.5 M3×18…2 pieces

2 x ø1.7, 1-core 10.5 8.4

shielded, 2- ø3.2 16.4 17.5 31
Cable length:2 m mounting hole 10.5 25.5 19.5

4-R1.75 4
16.4 14.5 2-M3, P=0.5
17.5 Material: Stainless steel Material: Stainless steel
t=1.2 t=1.2

Reflector R-6 for LV-H62 (Accessory) Reflector R-7 for LV-H62 (Accessory)

45 4.2
5.5 23 24 3.2
4.2 7
14.7 6
23 7 12
29.4
2- ø3.2
37 2- ø3.2 17.2

32
 Dimensions

LV-H Series

Unit: mm

STEP 1
Reflector R-8 for LV-H67 (Accessory) Long-distance reflector (optional)
OP-42198
47 8.8 4- ø4.5 8
8
25.6
47 51.2
61
30.4

102.4
3.5 102.4
30
2- ø4.5 150
40 5.5

STEP 2
51.2 8

8.8
8.8 8.8 5
102.4 8
130
Mounting bracket attached
25 2-M3×18
10 7 4

5 15.7
21.9 17
14.2
23.9 3

STEP 3
7.5
12

LV-H32 Mounting bracket for LV-H32 (Accessory)

22 6.6
7
6.2 4 14
3.5
8
2- 3.2 Trimmer for lock
* Accessory screws
ø11.4 M3×18…2 pieces
3 5 3.5
18.5 6.2 Centre of 15 1.2
3.5 emitted light

STEP 4
10 3.5

27 12.2 33 31.4 10°

Centre of 40.5 37.4 31.4
received light

2 x ø1.7, 1-core shielded, 16 3 12.4

Cable length:2m
R31.4 3.7
29 14.5 2-M3, P=0.5 6
Material: Stainless steel Material: Stainless steel
LV-H32 32.5 t=1.2 t=1.5
(Mounting bracket 29

SPECIFICATIONS
14 7 4
attached) 3.5
3.5

20.7
14.2 5
9.6
2-M3×18
12.4

27
40.5
29.9
17.7
6.9 10
DIMENSIONS

Mounting bracket for LV-H37/H47 (Accessory)

LV-H37/H47
33
24

12.4 12.5
6
2- ø3.2 (12) 3.5
mounting hole Centre of 10
emitted light ø3.5
3.5 8
(6.2)
* Accessory screws
6.2
14 8 M3×18…2 pieces
8
18.5 34.5 16 10
40
10 8
23.9 17.9
16 7.5 Centre of received light
70±15
2 x ø1.7, 1-core shielded, 8 14.5
26.5 Reference position 2-M3, P=0.5
for measurement Cable length:2m,
Material Stainless steel Material Stainless steel
t=1.2 t=1.5

CAD DATA Download Service www.keyence.com/cad

33
 LV-H Series

Mounting bracket attached

(LV-H37/H47 accessory)

12.5±5

16

2-M3×18
36.7
26.9
8.4
9.7
12
20.7 14.7

3.5
3.5 10 6 10
33

When mounting LV-L01 Slit sticker (included with LV-L01)

(LV-H42/41)

6 1.6 11.8
2 1 1 L
Slit sticker name L
5.4
22 5.9 3.3 Slit 1 2.6
Slit 2 2.0
1
2.7 Slit 3 1.5
Slit 4 1.1

LV-H42/41 Mounting bracket for

21
LV-H42/41 7
Indicator (Accessory) 6
3.5 4
(12) 8
3.5
Attachment mounting section 5
12.4 * Accessory screws
35 2- ø3.2 17.5 M3×18…2 pieces
5 Centre of 3 3.5 3.5
emitted light 22.5 9.5
Centre of
received light 8
18.3 16.6 16.9 18.1
20 14
8 28 22.9 16.9
2 x ø1.7, 1-core
shielded, 2- ø3.2 3.3
Cable length:2m mounting hole 3.3 7.2 2-M3, P=0.5
8.9 14.5
16.9 6
18 Material: Stainless steel Material: Stainless steel
t=1.2 t=1.5

LV-H42/41 21 Slit (Black) LV-H42/41

(Mounting bracket 7 When mounting
6 4
attached) the accessory slit
5 14.5
20.7 Slit width Slit width
14.2 1.5 0.5 1
1.5

9.6 Slit (Grey)

2-M3×18 22
(12) Indicator

14
28 Slit (Black) Slit (Grey)
22.5
14.5
7.5 10.5

When mounting LV-L02 Slit sticker (included with LV-L02)

(LV-H47)

1.5 6 1.5 11.8

1.3 1
L
5.4 Slit sticker name L
5.9 3.3
36.5 Slit 1 2.6
Slit 2 2.0
1.9 Slit 3 1.5
Slit 4 1.1

34
 Dimensions

LV-H Series

Unit: mm

LV-H64 LV-H65

STEP 1
(12) Indicator (12) Indicator

42.8 46.2
Centre of emitted/ 30.3 9.5 Centre of emitted/ 33.7 9.5
12.4 12.4
received light 11.8 3 received light 15.2 3
6.1 6.1
6.6 6.6
25 23 17 25 23 17

2 x ø1.7, 1-core shielded, 2- ø3.2 2 x ø1.7, 1-core shielded, 2- ø3.2

Cable length:2m mounting hole Cable length:2m mounting hole

STEP 2
Reflector OP-51430 (R-6 grey) Mounting bracket
for LV-H64/H65 (Accessory) for LV-H64/H65 (Accessory)
4.2
* Accessory screws
25
M3×18…2 pieces
12.5
5 8
5.5 45
25.5 19.5
1.3 23 8

4 4 2-M3, P=0.5
14.7
10
29.4 8 23 Material: Stainless steel t=1.5
10.5 2- ø3.5

STEP 3
8.4 3.5
2- ø3.2 4
37
10.5 8.4
16.4 17.5
10.5 31

4-R1.75 16.4 4 14.5

17.5 Material: Stainless steel t=1.5

LV-H64/H65 Optional reflective tape OP-51428

(Mounting bracket attached)
25
10 7 4 50
5

STEP 4
20.7 14.5
14.2 15
t=0.7
2-M3×18
(12)

17 3 31.5
23.9
7.5

SPECIFICATIONS
DIMENSIONS

CAD DATA Download Service www.keyence.com/cad

35
 LV-H Series

LV-21A/21AP/11A Mounting bracket attached

(included with LV-21A/11A)
ø4.5, 6-core xBrown/Blue: 0.34 mm
2

Black/White/Pink/Purple: 0.23 mm2

Cable length: 2m
28.5
(36.5)
20
92
(Maximum
when the 24
5 2- ø3.4
cover is 150° 30.7 15
opened) 1.1 3.1 max.
2-(4.4x3.4)

33.5 28.5 20
14.5
15
28.5
20.7 35.4
24
65.8 min

LV-22 A/22AP
ø3.6, 2-core x Black/White: 0.23 mm2
Cable length: 2m

20
92
(Maximum
when the
cover is
opened) 1.1 3.1

33.5 28.5
14.5

20.7 35.4 20
5 65.8 min

LV-20A

20

92
(Maximum
when the
cover is
opened) 1.1 3.1

33.5 28.5

20.7 35.4
65.8 3.5

End unit When several units are connected:

(included with LV-22A/22AP)
End unit End unit
6

DIN-rail mounting

(22.6) 20.8

9.2 * Make sure to use

35.4
53.8 end units when adding
expansion units. 6 6
L

No. of units L
1 40
2 60
3 80
4 100
5 120
6 140
7 160

36
 Dimensions

LV-H Series

Unit: mm

LV-H100/H110 (Transmitter) LV-H100/H110 (Receiver)

STEP 1
Indicator Indicator

12 12
Centre of Centre of
emitted light received light
12.4 41.3 34.2 12.4
8.8 20 16.8 14.4
3 3
10
20 14 14 20
10
2- ø3.2 2- ø3.2
mounting hole mounting hole
2x ø1.7, 1-core shielded, 2x ø1.7, 1-core shielded,
Cable length:2m Cable length: 2m

STEP 2
LV-B101 (Mounting bracket set includes 2 brackets for Plate nut for transmitter
transmitter/receiver for LV-H100/H110)
Supplied screws:
3.5
33.5
30.4 M3×18…2 pieces
Material: Stainless steel
8 24.4 t=1.5
3.5
5
4 18.5 4
2-M3, P=0.5
Material: Stainless steel 6
8.8 t=1.2
20
3.5 2- ø3.5 Plate nut for receiver
3.5
Supplied screws:
14 14 M3×18…2 pieces

STEP 3
27.5 27.9
Material: Stainless steel
4-R1.75 21.9 t=1.5
10°
16.8 10° 14.5
2-M3, P=0.5
6

LV-B102 (Mounting bracket set includes 2 brackets for

transmitter/receiver for LV-H100/H110 When the transmitter of the LV-H100/H110 is
C9 16.8 18.1 mounted (Inside)
2- ø3.5
3.5 (18.5)(21.8)
14
(11.1)
10.5 3.2
5.25 5
2.4 20

STEP 4
12.5 When the receiver of the LV-H100/H110 is
M3 screw 60.7 mounted (Inside)

(21.8) (18.5)(21.8)
(18.5) (11.1)

46.2 16.4
3.5 24 When the transmitter of the LV-H100/H110 is
ø3.5 mounted (Outside)
5.25
10.5 8
Material: Stainless steel
t=1.2 (34.1)
6
(32.4)

SPECIFICATIONS
12
6°
(24.7)
R1.75
49.3 3.5

Plate nut for transmitter Plate nut for receiver When the receiver of the LV-H100/H110 is
mounted (Outside)
Supplied screws: Supplied screws:
30.4 M3×18…2 pieces M3×18…2 pieces (34.1)
27.9
Material: Material: (32.4)
24.4 Stainless steel 21.9 Stainless steel (24.7)
t=1.5 t=1.5

2-M3, P=1.5 2-M3, P=1.5

6 6

LV-H300 (Transmitter) LV-H300 (Receiver)

DIMENSIONS

Indicator Indicator

12 12

42.5 12.4 12.4 47.4

31 8.5 26.5 17.9
Centre of 3
emitted light
18 20.5

41 41 35
20
20.5 Centre of
received light
2- ø3.2 2- ø3.2
mounting hole mounting hole
2x ø1.7, 1-core shielded, 2x ø1.7, 1-core shielded,
Cable length: 2m Cable length: 2m

CAD DATA Download Service www.keyence.com/cad

37
 LV-H Series

LV-B301 Plate nut for transmitter

(Mounting bracket for LV-H300, included
two brackets for the transmitter and receiver.) Supplied screws:
M3×18…2 pieces
43 36.9
6-R1.75 5 8 Material: Stainless steel
42.9 t=1.5

4 21 4
11 Material: Stainless steel
t=1.2 2-M3, P=0.5
3.5 17.9 3.5 6
3.5
18.5
2- ø3.5
Plate nut for receiver
4-R1.75 Supplied screws:
48.5
35 sM3×18…2 pieces
20 39.3
Material: Stainless steel
t=1.5
10° 45.3
10° 14.5
31
2-M3, P=0.5
6

LV-B302
(Mounting bracket for LV-H300, included
two brackets for the transmitter and receiver.)
4.5 C9 17.9 30.2 When the transmitter of the LV-H300 is
mounted (Inside)
35 9.5 4- ø3.5

19 3.2 (18.5) (21.8)

20 (11.1)

4.5
18 31
M3 screw 12.2 When the receiver of the LV-H300 is
67 mounted (Inside)

(18.5) (21.8) (18.5) (21.8)

(11.1)
52.5 36.4
44
3.5 ø3.5
8.5
22 Material: When the transmitter of the LV-H300 is
19 8 mounted (Outside)
Stainless steel
9.5 t=1.2
14.5
7° (32.4) (34.1)
(24.7)
55.4 3.5
R1.75

When the transmitter of the LV-H300 is

Plate nut for transmitter
mounted (Outside)
Supplied screws:
36.9 M3×18…2 pieces
(32.4) (34.1)
Material: Stainless steel
t=1.5 (24.7)
42.9

6 2-M3, P=0.5

Plate nut for receiver

Supplied screws:
M3×18…2 pieces
39.3
Material: Stainless steel
t=1.5
45.3

2-M3, P=0.5
6

38
 Dimensions

LV-H Series

Unit: mm

LV-51M/51MP Mounting bracket attached

Brown/Blue: 0.34 mm2 (LV-51M/51MP accessory)

STEP 1
ø4.5, 6-core x Black/White/Orange/Purple: 0.23 mm2
Cable length: 2m
28.7
20
(36.5)
101
(Maximum
when the 5 32.7
2- ø3.4
cover is 39.4 15
opened) MAX 2-(4.4x3.4)
3.1 150°
1.1
20
28.7
15
33.7 28.5

STEP 2
14.5
29.4 35.4
5 24
74.6 min

LV-52/52P

ø3.6, 2-core x Black/White: 0.23 mm2

Cable length: 2m

20

101

STEP 3
(Maximum
when the
cover is
opened) 3.1
1.1

28.7
33.7
14.5
29.4 35.4
5 20
74.6 min

End unit

STEP 4
(LV-52/52P accessory)
6 No. of units L
1 40
DIN-rail mounting
2 60
3 80
20.8 4 100
(22.6)
5 120
9.2 35.4 6 140
7 160

SPECIFICATIONS
53.8

When several units are connected:

End unit End unit

DIMENSIONS

* Make sure to use

end units when adding
expansion units. 6
6 L

CAD DATA Download Service www.keyence.com/cad

39
 www.keyence.com

Copyright (c) 2008 KEYENCE CORPORATION. All rights reserved. LVSBG-WW-C-E 1111-5 600566