MORTON® FUTURISTIC PERFORMANCE COATING
TECHNICAL DATA SHEET
Product Name– FRP White Primer (X.F.) Batch no.– RD-220358
This is an excellent product for FRP, Stone, & Wood.
Paint Type Product Finishing Recommended Pack Size
Type Substrate
Solvent Based Interior / Exterior Smooth & Semi FRP, Stone, & Wood 1 , 4 and 20 Ltr
Glossy
Composition
Binder :- Synthetic Resin
Thinner :- Ester, Alcohol etc.
Technical Data
Liquid Paint Properties :-
Viscosity by Ford Cup B4 @30°C : 38±3 Sec
Specific Gravity : 1.10±0.03
% NVM @120°C/1 Hrs. : 35±3%
Mixing Ratio : Part A : Part B ( 4:1 )
% Thinner Intake : 60-100 %
Application Viscosity@30°C (SPRAY) : 16±2 Sec
Mode of Application : By conventional Spray Gun
Recommended Thinner : TH-2120-000
DFT in µm : 15-20 µm
Gloss@60° : Min. 30 units
Surface Dry : 01-05 Min.
Tack Free : 05-15 Min.
Hard Dry : 24 Hrs
Shade : Close to standard
Stoving Schedule : Air Drying
Cross cut adhesion test : Passes 1 MMX1MM, 100/100, no tape loss
1
Page
K.B POLY CHEM ( INDIA ) LTD.
F-25, Site – C , UPSIDC , INDL Area , Sikandra ,Agra-282007
PH NO. +91-562-3266969 , Fax No. - +91 -562-2640576 , Email:
[email protected] Last Updated: April 2022
MORTON® FUTURISTIC PERFORMANCE COATING
TECHNICAL DATA SHEET
Application Method
Substrate→ FRP White Primer (X.F.) → Air Dying → After 2 hrs. apply top coat → Air Dying
Substrate must be dry and free from dust, grease and other parting agents.
All the above dry film properties to be checked after min. 72 Hrs.
Cleaning
• Clean up equipment with Recommended Thinner immediately after use.
Safety Precautions
• Keep container tightly closed and keep out of reach children or away from food and drink.
• Ensure good Ventilation during application and drying.
• When applying paint, it is advisable to wear eye protection.
• In case of contact with eye, rinse with plenty of water immediately and seek medical advice.
• Remove splashes from skin by using soap or water.
• Paint must always be stored in a cool place.
• When transporting paint, care must be taken. Always keep container in a secure upright position.
• Dispose off any paint waste in accordance with the appropriate Environment Quality Regulations.
Disclaimer
The above information is given to the best of our knowledge based on laboratory tests and practical
experience. However, since we cannot anticipate or control the many conditions under which our products
may be used, we can only guarantee the quality of the product itself.
We reserve the right to alter the given without prior notice.
2
Page
K.B POLY CHEM ( INDIA ) LTD.
F-25, Site – C , UPSIDC , INDL Area , Sikandra ,Agra-282007
PH NO. +91-562-3266969 , Fax No. - +91 -562-2640576 , Email:
[email protected] Last Updated: April 2022
