Globe Control Valve 7027
with integrated positioner
DN 15 to DN 50 - PN 40
Pneumatically operated globe control valve for the control
of neutral through to aggressive media.
• High Kvs-values
• Easy to isolate
• Compact design
• All wetted parts made of stainless steel
• For temperatures from -100°C up to +220°C
• Operating pressures up to 40 bar
• Rotable actuators
• Integrated positioner
Technical information
Body material Stainless steel 1.4408
Nominal sizes DN 15 up to DN 50
Connection Welding ends acc. ISO 1127
Nominal pressure PN40 Options:
Fluid temperature* -30°C up to +200°C, opt. -100°C up to +220°C e.g.
Ambient temperature Digital positioner -20 (-10) °C up to +75°C
- Optical position indicator
Analog positioner -20°C up to +60°C
Leakage acc. IEC 60534-4 Class VI
- External I/P-converter Type 8045
Packing leakage ISO FE BH-CC3-SSA1-t(-30°C, +80°C) - Ex-electropneumatic positioner
Test pressure 40 bar ( II 2 G EEx ib IIC T6)
*: Please consider further temperature versions and limits in technical bulletin 32
Materials
Body Stainless steel 1.4408
Seating seal PTFE
Bonnet Brass chrome plated (actuator Ø 50 mm, 80 mm )
Aluminium corrosion protected (actuator Ø 125 mm )
Diaphragm actuator Stainless steel 1.4301/1.4305
Actuator springs Stainless steel 1.4310 (actuator Ø 80 mm, diaphr.act.)
Spring steel wire C, plastic coated (actuator Ø 125 mm)
Packing PTFE (carbon filled), spring 1.4310
Valve stem Stainless steel 1.4571, roller burnished
Position indicator PA Trogamid (clear)
Positioner
For technical information on our positioners please refer to the corresponding data sheets.
Schubert & Salzer Control Systems GmbH, Bunsenstr. 38, 85053 Ingolstadt, Tel: +49 (0)841-9654 0, Fax: +49 (0)841 9654 590
[email protected], www.schubert-salzer.com
Globe Control Valve 7027
Standard version with integrated positioner
Admissible differential pressure with positioner
Digital positioner Analog positioner
Piston Differential Supply pressure Piston Spring configu- Differential Supply pressure
Springs
DN Ø pressure range DN Ø ration pressure range
mm Number bar bar mm Number bar bar
15 80 2 17 4-6 15 80 2 17 4-6
20 80 2 17 4-6 20 80 2 17 4-6
25 80 1 17 4-6 25 80 1 12 4-6
25 125 2 17 3-6 25 125 2 17 3-6
25 250 4 17 3-6 25 250 4 11 2,8 - 6
32 80 1 10 4-6 32 80 1 7 4-6
32 125 2 17 3-6 32 125 2 13 3-6
32 250 4 17 3-6 32 250 6 17 2,8 - 6
40 80 1 6 4-6 40 80 1 4 4-6
40 125 3 17 4-6 40 125 3 11 4-6
40 250 6 17 3-6 40 250 6* (Code T) 9 2,8 - 6
40 250 8 15 3,4 - 6
Reinforced design:
50 80 1 3 4-6 Reinfoced design:
50 125 3 11 4-6 50 80 1 2 4-6
50 250 6* (Code T) 12 4-6 50 125 3 6 4-6
50 250 8 17 4-6 50 250 6* (Code T) 5 4-6
* Special springs 50 250 8* (Code W) 9 4-6
50 250 10* (Code X) 13 4-6
50 250 12 16,9 4-6
* Special springs
Admissible differential pressure, direct pressure range
Differential pressure (NC) Max. pressure (NO) Supply air
(bar) (bar) (bar) Diaphragm
DN area
spring range spring range spring range
(cm²)
0,2 - 1 bar 0,4 - 2 bar 0,2 - 1 bar 0,4 - 2 bar 0,2 - 1 bar 0,4 - 2 bar
15 17 17 17 17 1,2 2,4 250
20 16 17 17 17 1,2 2,4 250
25 9 17 12 15 1,2 2,4 250
32 5 15 6 13 1,2 2,4 250
40 3 10 2 5 1,2 2,4 250
50 2 6 1 2 1,2 2,4 250
Kvs-Values
linear equal percentage
DN
15 20 25 32 40 50 15 20 25 32 40 50
100% 4,5 7,8 12 18,8 25,7 33,5 3,6 7 12,3 19,7 30 35
63% - - - - - 26,5 - - - - - 22,4
40% 1,8 4,2 6,7 10,3 12,5 - 1,6 2,7 5,3 8,5 12,3 -
25% 1,1 2,9 3,8 - - - 1,2 1,8 4,9 - - -
2/8
Globe Control Valve 7027
Pressure balanced version with integrated positioner
Admissible differential pressure with positioner
Digital positioner 8049 Analog positioner 8047
Spring confi- Differential Supply pres- Differential Supply pres-
Piston Ø
DN guration pressure sure range pressure sure range
mm Number bar bar bar bar
50 80 2 17 4-6 17 4-6
3/8
Globe Control Valve 7027
Ordering number system
1 2 3 4 5 6 7 8 9 10 11 12 13 14
7 0 2 7 / V 0 S 1 - 6 : Please quote all 6 sections.
7 - 14: Quote only if required.
Symbol: "V": Valve
Type Size "A": Actuator (valve without body)
"R": Repair kit (sealings)
Reinforced version at DN50: "K" at position 22
1. Body type 2. Connection 3. Body mate- 4. Seat ma- 5. Positioner 6. Actuator 7. Springs
rials terial
0 globe con- H welding 2 stainless 0 PTFE 6 p/p positioner, Type 1 piston - without sig-
trol valve ends acc. steel 8047 80 mm nificance
ISO 1127 1.4408 5 PTFE with
25% glass 7 i/p positioner, Type 2 piston 1 spring to
fibre 8047 125 mm open (only
with digital
7 PEEK 8 i/p positioner with C diaphragm positioner)
plug connection actuator
8 PEEK for M12x1, Type 8047 D250 mm P spring set
applica- 0,2-1 bar
tions above 9 i/p positioner ex- (D 250 mm)
160°C proof (II 2 G Eex
ib IIC T6), plug T 6 springs
connection M12x1, (D 250 mm)
Type 8047
W 8 springs
C digital positioner, (D 250 mm)
Type 8049 4 wire
Y 12 springs
R digital positioner (D 250 mm)
Type 8049 2 wire
W digital positioner
Type 8049-ExPro,
ATEX, IECEX
K digital positioner
Type 8049 ExPro-FM
N digital positioner
Type 8049 IO-Link
version
8. Characte- 9. Packing 10. Kvs-value Accessories 12. Special versions Please declare other remarks and
ristic 11. special requests in clear words.
- linear - standard - full Kvs- - without S To state if some sta-
value tions are quoted!
1 equal per- 2 packing 6 pilot-valve
centage underneath 1 red. to 40% DN2 230V
AC
2 red. to 25%
7 pilot-valve
3 red. to 15% DN2 24 DC
4 red. to
7,5%
5 red. to
22,5%
6 red. to 10%
Ordering Example: 7027/020V0H20C1
Globe Control Valve, nominal size DN 20, welding ends acc. ISO 1127, stainless steel,
PTFE seat material, N.C., digital positioner Typ 8049, 4-wire, with position indicator, piston Ø
80 mm, linear characteristic, Kvs-value = 8,8
4/8
Globe Control Valve 7027
Standard version with integrated positioner
Dimensions and weights
digital positioner type 8049
DN Actuator d1 s C D E I L SW2 Weight (kg)
15 80 21,3 2 20 96 359 80 95 30 4,4
20 80 26,9 2,3 22 96 367 80 110 30 4,5
25 80 33,7 2,6 21 96 376 80 120 30 4,7
32 80 42,4 2,6 20 96 397 80 140 30 5,0
32 125 42,4 2,6 20 146 419 105 140 30 7,6
40 80 48,3 2,6 22 96 402 80 160 30 5,3
40 125 48,3 2,6 22 146 425 105 160 30 7,9
Reinforced design:
50 80 60,3 2,9 28,0 96 429 80 190 32 5,9
50 125 60,3 2,9 28 146 450 105 190 32 8,5
5/8
Globe Control Valve 7027
Standard version with integrated positioner
Dimensions and weights
p/p-positioner i/p-positioner
type 8047 type 8047
E Weight (kg)
DN Actuator d1 s C D I L SW2
p/p i/p p/p i/p
15 80 21,3 2 20 96 301 334 77 95 30 3,7 4,0
20 80 26,9 2,3 22 96 309 342 77 110 30 3,8 4,1
25 80 33,7 2,6 21 96 318 351 77 120 30 4,0 4,3
32 80 42,4 2,6 20 96 339 372 77 140 30 4,3 4,6
32 125 42,4 2,6 20 146 363 394 104 140 30 6,9 7,2
40 80 48,3 2,6 22 96 346 379 77 160 30 4,6 4,9
40 125 48,3 2,6 22 146 369 400 104 160 30 7,2 7,5
Reinforced design:
50 80 60,3 2,9 28,0 96 371 404 77 190 32 5,3 5,5
50 125 60,3 2,9 28 146 394 452 104 190 32 7,8 8,1
6/8
Globe Control Valve 7027
Standard version with integrated positioner
Dimensions and weights
digital positioner type 8049
DN d1 s C E L SW2 Weight (kg)
15 21,3 2 20 456 95 30 15,6
20 26,9 2,3 22 464 110 30 15,7
25 33,7 2,6 21 473 120 30 15,9
32 42,4 2,6 20 494 140 30 16,0
40 48,3 2,6 22 501 160 30 16,2
Reinforced design:
50 60,3 2,9 28,0 526 190 32 16,5
7/8
Globe Control Valve 7027
Standard version with integrated positioner
Dimensions and weights
p/p-positioner i/p-positioner
Text and pictures are not binding. We reserve the right, to alter the equipment.
type 8047 type 8047
E Weight (kg)
DN d1 s C L SW2
p/p i/p p/p i/p
15 21,3 2 20 398 431 95 30 14,9 15,2
20 26,9 2,3 22 406 439 110 30 15,0 15,3
25 33,7 2,6 21 415 448 120 30 15,2 15,5
32 42,4 2,6 20 436 469 140 30 15,3 15,6
40 48,3 2,6 22 443 476 160 30 15,5 15,8
Reinforced design:
50 60,3 2,9 28,0 468 501 190 32 15,8 16,1
8/8
7027 - data sheet / Version: 20.04.2023
