SWI GAWAY

SPORTS PRODUCTS
MVP/XXL
ASSEMBLY MANUAL

IMPORTANT: THIS IS SERIOUS EQUIPMENT

WEAR A HELMET AND FOLLOW THE SAFETY
PRECAUTIONS LISTED ON THE BACK PAGE
JK R
Q
A

W
N
U CORD
CONNECTOR
O
V
P
X
M B
P1

H W HITTING
MAT
I Y
S

G
F
T
D
E C L

A TOP FRAME HOOP P HEIGHT ADJUST ROPE

B FRAME UPRIGHTS (2) P1 REAR BUNGEE TENSIONER
C BOTTOM FRAME HOOP Q BOOM SUPPORT FITTING
D EYE BOLTS R TOP BOOM PULLEY
E FOOT SPLIT FITTING S BOTTOM BOOM PULLEY
F LEG EXTENSIONS (2) T KNOB (4)
G COUPLER FITTINGS (6) U NET AND RED ROPE
H BASE HOOP FITTING V NET CLIPS (56)
I BASE HOOP W BUNGEES (3)
JK TOP BOOM (53”) X BALL WITH TETHERS
L BOTTOM BOOM (53”) Y MIDDLE FRAME PULLEY
M INNER TELESCOPE
N OUTER TELESCOPE Not shown: Extra Net Clips (5), Extra
Cord Connectors (2), Extra Bungee
O TELESCOPE FITTING
(1), Allen Wrench, or Manual.

Copyright © SwingAway Sports, Inc. 2014 | All Rights Reserved

THE "SwingAway®" PRODUCT IS PROTECTED UNDER US PATENTS 5,795,250 AND 7,914,400.
 SWI GAWAY
SPORTS PRODUCTS
MVP/XXL
ASSEMBLY MANUAL
Dear SwingAway Customer,
Congratulations - You have just changed the way you play baseball forever not just the way
you swing, but the way you train your body and mind. But you will have to want it badly
enough to work hard for it, and harder every day. I started training with the SwingAway
when I was 10 years old and still use it today as a Pro. When I started using the SWINGAWAY
I started to become a different ball player, a BETTER ball player. I gradually built better
swing mechanics, focus and a new greater confidence in myself the kind that makes you
wake up every day, hungry to show the world what you can do, and do it just a little better
every time. Before that, I'd tried the other hitting aids and none of them worked. The
SWINGAWAY machine is the real deal, a game changer of Hitting Training aids, because you
don't just train with it - it trains you. The SwingAway will make you a better hitter, PERIOD.
Now that you've heard my SwingAway story, I hope that as you
set up your machine & take your first swing, you begin to write
your own SwingAway story. Remember to use the machine
safely and properly. Get your swings in EVERY DAY. If you have a
weakness, focus on it until you train your body to overcome it.
Be focused, diligent and unrelenting. And remember this: You're
just a SWINGAWAY from becoming a great hitter!

Bryce Harper, Outfielder for the Washington Nationals

MLB Rookie of the Year in 2012
SwingAway Trained Since 2002
WARRANTY INFORMATION
SwingAway Sports Products stands 100% behind all of our products. Please check the
contents of the box to make sure ALL the parts and components are intact. If a part is
missing or was damaged during shipping call SwingAway IMMEDIATELY at 800-999-1968
or email us at [email protected] . Our Customer Service Professionals will take
care of any issue. (All models have a 90 day limited warranty)
DO NOT CALL OR TAKE BACK THE MACHINE TO THE RETAILER, they do not carry
our Parts and Components. Please register your purchase on-line at
http://www.swingaway.com/warranty-s/1826.htm .
The Most Important Step is to ASSEMBLE the SWINGAWAY Properly. Follow the
instructions in the Manual found in your box. For further detailed video
instruction, Please to go to our Social Media Sites or use the sources below.
SwingAway's Facebook Page - Like us and Follow SwingAway
http://www.facebook.com/SWINGAWAYSPORTS
This Page will keep you current with all of the SWINGAWAY products.
SwingAway's YouTube Channel
http://www.youtube.com/user/HittingPro.
This Channel will be constantly updated with ASSEMBLY INSTRUCTIONS,
TESTIMONIALS, and INSTRUCTIONAL VIDEOS.
Follow us on Twitter
http://www.youtube.com/user/HittingPro.

Remember if you have any questions or issues with your New SwingAway - Contact us
directly, your retailer can not help or give you the Technical Support or Replacement
Parts.
Copyright © SwingAway Sports, Inc. 2014 | All Rights Reserved
THE "SwingAway®" PRODUCT IS PROTECTED UNDER US PATENTS 5,795,250 AND 7,914,400.
 SWI GAWAY
SPORTS PRODUCTS
MVP/XXL
ASSEMBLY MANUAL

NOTE: PARTS LIST

IN THE BOX THERE IS AN
EXTRA BUNGEE
IN THE BOX
A TOP FRAME
HOOP
(NOT SHOWN) B FRAME
UPRIGHTS (2)
C BOTTOM
JK Q FRAME HOOP
D EYE BOLTS
A E FOOT SPLIT
FITTING
F LEG
EXTENSIONS
G I H (2)
F G COUPLER
W FITTINGS (6)
H BASE HOOP
B FITTING
I BASE HOOP
E JK TOP BOOM
(53”)
C L BOTTOM
Y D BOOM (53”)
L M INNER
TELESCOPE
N OUTER
M O N TELESCOPE
S
O TELESCOPE
X FITTING
P HEIGHT
P ADJUST ROPE
P1 T
P1 REAR BUNGEE
U R
TENSIONER
EXTRAS BAG
Q BOOM
SUPPORT
FITTING
R TOP BOOM
PULLEY
S BOTTOM
BOOM PULLEY
T KNOB (4)
U NET AND RED
ROPE
V NET CLIPS (56)
HITTING MAT W BUNGEES (3)
X BALL WITH
TETHERS
Y MIDDLE FRAME
PULLEY
V Not shown: extra
bungee, allen
wrench, and manual

Copyright © SwingAway Sports, Inc. 2014 | All Rights Reserved

THE "SwingAway®" PRODUCT IS PROTECTED UNDER US PATENTS 5,795,250 AND 7,914,400. 1
 SWI GAWAY
SPORTS PRODUCTS
MVP/XXL
ASSEMBLY MANUAL

CORD CONNECTORS
CORD CONNECTORS ARE USED
TO CONNECT CORDS AND BUNGEES

PART P

PART P1
WITH
PLASTIC CORD
TUBE CONNECTOR
LOCATIONS

KNOT THE END OF THE

1 CORD OR BUNGEE
(LEAVE ABOUT AN INCH)

PUSH IT THROUGH
2 THE LARGE HOLE
IN THE CONNECTOR

LOCK IT IN BY PULLING
3 THE CORD UP INTO
THE SMALL HOLE

Copyright © SwingAway Sports, Inc. 2014 | All Rights Reserved

2 THE "SwingAway®" PRODUCT IS PROTECTED UNDER US PATENTS 5,795,250 AND 7,914,400.
 SWI GAWAY
SPORTS PRODUCTS
MVP/XXL
ASSEMBLY MANUAL

STEP 1 ASSEMBLE THE NET FRAME

LAY IT OUT ON THE FLOOR

GET PARTS “A”, “B”, AND “C”.

THERE ARE TWO PART “B”’s, FOUR PARTS TOTAL.

GET FOUR OF THE COUPLER FITTINGS - PART G

EYEBOLTS
A
B
STUB UP

COUPLER
FITTING

Copyright © SwingAway Sports, Inc. 2014 | All Rights Reserved

THE "SwingAway®" PRODUCT IS PROTECTED UNDER US PATENTS 5,795,250 AND 7,914,400. 3
 SWI GAWAY
SPORTS PRODUCTS
MVP/XXL
ASSEMBLY MANUAL

STEP 2 ATTACH THE COUPLERS

IMPORTANT:
MAKE SURE THE PIPES ARE INSERTED HALFWAY IN THE COUPLER.
.

SECTION OF COUPLER

TUBING
HALFWAY IN
TUBING
* DO NOT OVER TIGHTEN SET SCREWS

MAKE SURE THE

FRAME IS FLAT
AND TIGHTEN UP ALLEN WRENCH
SET SCREWS
STUB UP

* AFTER ASSEMBLING, SET THIS TO THE SIDE.

Copyright © SwingAway Sports, Inc. 2014 | All Rights Reserved

4 THE "SwingAway®" PRODUCT IS PROTECTED UNDER US PATENTS 5,795,250 AND 7,914,400.
 SWI GAWAY
SPORTS PRODUCTS
MVP/XXL
ASSEMBLY MANUAL

STEP 3 BASE ASSEMBLY

GET PARTS “I”, AND “F”. THERE ARE TWO PART “F”’s, THREE PARTS TOTAL.
GRAB TWO MORE COUPLERS

I EYEBOLTS
UP

FEET DOWN

G F
E
F
E

REMEMBER - HALFWAY IN COUPLER

TUBING

HALFWAY IN
TUBING

Copyright © SwingAway Sports, Inc. 2014 | All Rights Reserved

THE "SwingAway®" PRODUCT IS PROTECTED UNDER US PATENTS 5,795,250 AND 7,914,400. 5
 SWI GAWAY
SPORTS PRODUCTS
MVP/XXL
ASSEMBLY MANUAL

STEP 4 OPEN UP THE FOOT SPLIT FITTINGS

TAKE THE SCREWS OUT OF THE FRONT OF THE FOOT SPLIT FITTINGS
AND OPEN THE FITTINGS UP.

PIVOTS OPEN LIKE A CLAM SHELL.

DON’T LOSE THESE SCREWS!

Copyright © SwingAway Sports, Inc. 2014 | All Rights Reserved

6 THE "SwingAway®" PRODUCT IS PROTECTED UNDER US PATENTS 5,795,250 AND 7,914,400.
 SWI GAWAY
SPORTS PRODUCTS
MVP/XXL
ASSEMBLY MANUAL

STEP 5 REAR TELESCOPE

SLIDE THIS PIECE

ALL THE WAY DOWN

GOOD TIME TO DOUBLE CHECK

THIS FITTING - MAKE SURE ROPE
GOES THROUGH ALL FOUR HOLES

PART O IS ATTACHED
TO N WITH CORDS

M
FITTING IS
ACTUALLY
INSERT ALL BLACK
THE WAY IN

BASE ASSEMBLY
TIGHTEN
KNOB

Copyright © SwingAway Sports, Inc. 2014 | All Rights Reserved

THE "SwingAway®" PRODUCT IS PROTECTED UNDER US PATENTS 5,795,250 AND 7,914,400. 7
 SWI GAWAY
SPORTS PRODUCTS
MVP/XXL
ASSEMBLY MANUAL

PUT THE NET FRAME ON THE OPEN

STEP 6 PART OF THE FOOT SPLIT FITTINGS

AND RAISE THE TELESCOPES!

INSERT (N) POLE

INTO BOOM SUPPORT
BOOM
FITTING AND TIGHTEN
SUPPORT
T-KNOB
FITTING

Copyright © SwingAway Sports, Inc. 2014 | All Rights Reserved

8 THE "SwingAway®" PRODUCT IS PROTECTED UNDER US PATENTS 5,795,250 AND 7,914,400.
 SWI GAWAY
SPORTS PRODUCTS
MVP/XXL
ASSEMBLY MANUAL

RE-ASSEMBLE THE
STEP 7 FOOT SPLIT FITTINGS

ROTATE UP
TO CLOSE
AND TIGHTEN
FINGER TIGHT

FOOT SPLIT FITTINGS

Copyright © SwingAway Sports, Inc. 2014 | All Rights Reserved

THE "SwingAway®" PRODUCT IS PROTECTED UNDER US PATENTS 5,795,250 AND 7,914,400. 9
 SWI GAWAY
SPORTS PRODUCTS
MVP/XXL
ASSEMBLY MANUAL

STEP 8 ATTACH BOTTOM BOOM - PART L

PART L HAS PART S ATTACHED

PUT THE BOTTOM BOOM INTO THE STUB ON THE

FRONT NET FRAME - ALL THE WAY IN

TIGHTEN THE KNOB ON THE STUB

STUB

KNOB
L

Copyright © SwingAway Sports, Inc. 2014 | All Rights Reserved

10 THE "SwingAway®" PRODUCT IS PROTECTED UNDER US PATENTS 5,795,250 AND 7,914,400.
 SWI GAWAY
SPORTS PRODUCTS
MVP/XXL
ASSEMBLY MANUAL

STEP 9 VERY IMPORTANT!

LEVEL YOUR MACHINE OUT
WHILE ON A FLAT SURFACE, ADJUST THE FRAME BY PULLING OR
PUSHING THE TELESCOPING TUBES

MAKE SURE ALL THE FEET ARE TOUCHING THE GROUND

THEN TIGHTEN THE KNOB ON THE MIDDLE TELESCOPE FITTING

KNOB
TIGHT

LOOSEN
KNOB

KNOB
TIGHT KNOB
TIGHT

TOUCH
FLOOR
TOUCH TOUCH
FLOOR FLOOR

Copyright © SwingAway Sports, Inc. 2014 | All Rights Reserved

THE "SwingAway®" PRODUCT IS PROTECTED UNDER US PATENTS 5,795,250 AND 7,914,400. 11
 SWI GAWAY
SPORTS PRODUCTS
MVP/XXL
ASSEMBLY MANUAL

STEP 10 PUT THE TOP BOOM IN

GET PART JK AND THE TOP BOOM PULLEY - PART R (WITH THE RED PULLEY)

INSERT THE TUBING AS FAR AS IT WILL GO - ABOUT 5 INCHES

SLIDE THE TOP BOOM PULLEY ON

R
JK

5 INCHES IN

DO A “WALK-AROUND”

IMPORTANT:
WALK AROUND THE MACHINE
AND TIGHTEN EVERYTHING UP

FOOT
SPLIT
FITTINGS

Copyright © SwingAway Sports, Inc. 2014 | All Rights Reserved

12 THE "SwingAway®" PRODUCT IS PROTECTED UNDER US PATENTS 5,795,250 AND 7,914,400.
 SWI GAWAY
SPORTS PRODUCTS
MVP/XXL
ASSEMBLY MANUAL

STEP 11 ATTACH THE NET WITH NET CLIPS

- CLIP ON 4 CORNERS FIRST

- CLIP EVERY OTHER WEB ON TOP AND BOTTOM

V
- CLIP EVERY WEB DOWN THE SIDES

NET
CLIP
2
6
5

10

14
9 WEAVE IN
TARGET ROPE
DEPENDING ON THE HEIGHT
OF THE HITTER WEAVE THE
TARGET ROPE BETWEEN
WEBS OF THE NET

13 APPROXIMATELY 10 WEBS WIDE

BY 15 WEBS LONG

LEAVE ENOUGH TO TIE A

KNOT AT THE BOTTOM

12

8
11

Copyright © SwingAway Sports, Inc. 2014 | All Rights Reserved

THE "SwingAway®" PRODUCT IS PROTECTED UNDER US PATENTS 5,795,250 AND 7,914,400. 13
 SWI GAWAY
SPORTS PRODUCTS
MVP/XXL
ASSEMBLY MANUAL

STEP 12 GET BALL KIT

DO NOT UNTIE THE BALL KIT

THREAD THE BUNGEES

(BUNGEES SHOULD BE TAUT) 1
COME THRU
TOP BOOM PULLEY

GO THRU
2 THIS PULLEY

THREAD BUNGEE THRU

THE CORD CONNECTOR
AND MAKE A KNOT

3 FULL NET
NOT SHOWN
FOR
CLARITY

TETHERS
NOT SHOWN
FOR
CLARITY

6
5 4
THREAD BUNGEE THRU
THE CORD CONNECTOR GO THRU MIDDLE THREAD BOTTOM
AND MAKE A KNOT FRAME PULLEY BUNGEE THRU
BOTTOM PULLEY

SEARCH “SWINGAWAY ASSEMBLY” FOR

THE LATEST VIDEO INSTRUCTIONS

Copyright © SwingAway Sports, Inc. 2014 | All Rights Reserved

14 THE "SwingAway®" PRODUCT IS PROTECTED UNDER US PATENTS 5,795,250 AND 7,914,400.
 SWI GAWAY
SPORTS PRODUCTS
MVP/XXL
ASSEMBLY MANUAL

STEP 13 THREAD THE TETHERS

(BOTH SIDES)

FULL NET
NOT SHOWN
FOR
THREAD TETHER CLARITY
THRU THE CORD
CONNECTOR
AND MAKE A KNOT

1
THREAD YOUR TETHERS
THRU THE EYEBOLTS ON
EACH SIDE

SEARCH “SWINGAWAY ASSEMBLY” FOR

THE LATEST VIDEO INSTRUCTIONS

Copyright © SwingAway Sports, Inc. 2014 | All Rights Reserved

THE "SwingAway®" PRODUCT IS PROTECTED UNDER US PATENTS 5,795,250 AND 7,914,400. 15
 SWI GAWAY
SPORTS PRODUCTS
MVP/XXL
ASSEMBLY MANUAL

STEP 14 ADJUST THE BALL HEIGHT

ADJUST THE CORD IN THIS FITTING

TO CONTROL THE BALL HEIGHT

SEARCH “SWINGAWAY ASSEMBLY” FOR

THE LATEST VIDEO INSTRUCTIONS

Copyright © SwingAway Sports, Inc. 2014 | All Rights Reserved

16 THE "SwingAway®" PRODUCT IS PROTECTED UNDER US PATENTS 5,795,250 AND 7,914,400.
 SWI GAWAY
SPORTS PRODUCTS
MVP/XXL
ASSEMBLY MANUAL

STEP 15 GET YOUR HITTING MAT OUT

Copyright © SwingAway Sports, Inc. 2014 | All Rights Reserved

THE "SwingAway®" PRODUCT IS PROTECTED UNDER US PATENTS 5,795,250 AND 7,914,400. 17
 SWI GAWAY
SPORTS PRODUCTS
MVP/XXL
ASSEMBLY MANUAL

FOLDING INSTRUCTIONS
TAKE OFF THE TOP BOOM PULLEY
1 AND THREAD IT INTO THE NET

SLIGHTLY TILT MACHINE BACK TAKE THE TOP BOOM

2 LOOSEN THE T-KNOB AND 3 OUT AND THREAD IT
TAKE OFF THE BOTTOM BOOM HORIZONTALLY IN THE NET
THREAD IT INTO THE NET
VERTICALLY

SEARCH “SWINGAWAY ASSEMBLY” FOR

THE LATEST VIDEO INSTRUCTIONS

Copyright © SwingAway Sports, Inc. 2014 | All Rights Reserved

18 THE "SwingAway®" PRODUCT IS PROTECTED UNDER US PATENTS 5,795,250 AND 7,914,400.
 SWI GAWAY
SPORTS PRODUCTS
MVP/XXL
ASSEMBLY MANUAL

FOLDING INSTRUCTIONS cont.

TIGHTEN THE MIDDLE KNOB
4 COLLAPSE THE MACHINE 5 AND PULL THE REAR
LOOSEN BACK KNOBS TELESCOPING SUPPORT OUT

6 FOLD UP THE REAR SUPPORT YOUR SWINGAWAY IS

7
FOLLOW WITH THE BACK FRAME READY TO STORE.

SEARCH “SWINGAWAY ASSEMBLY” FOR

THE LATEST VIDEO INSTRUCTIONS

Copyright © SwingAway Sports, Inc. 2014 | All Rights Reserved

THE "SwingAway®" PRODUCT IS PROTECTED UNDER US PATENTS 5,795,250 AND 7,914,400. 19
 SWI GAWAY
SPORTS PRODUCTS
MVP/XXL
ASSEMBLY MANUAL

HITTING MAT
FOR RIGHT HANDED HITTERS
ALIGN THE MACHINE TO SIMULATE INSIDE AND OUTSIDE PITCHES

OUTSIDE PITCH MIDDLE PITCH INSIDE PITCH

FOR LEFT HANDED HITTERS

ALIGN THE MACHINE TO SIMULATE INSIDE AND OUTSIDE PITCHES

OUTSIDE PITCH MIDDLE PITCH INSIDE PITCH

The Patented SwingAway Hitting Mat - replicates the inner portion of the Batter's Box,
featuring an Official Size Home Plate and will allow the hitter to "visualize" where to
connect and drive the pitched ball. The mat is marked for both Right and Left handed
Hitters and numbered baseballs showing the "Proper Contact Points” plus Directional
Arrows to show where to Drive the Pitches that are Inside, Outside, or Down the Middle.
The SwingAway Hitting Station combined with the Hitting Mat will train players of all ages
and skill levels to hit the ball where it is pitched, pulling the inside pitch, going opposite
field with an outside pitch and driving the middle pitch right back where it came from.
The SwingAway and SA Mat Combination will show you the direction and the trajectory of
the hit ball plus the SA will train the hitter to hit hard powerful line drives to the proper
field for any pitch location with a Short Powerful Compact Swing. The SA Mat is also a
great stand-alone tool to use during live batting practice, soft toss and tee drills.

Copyright © SwingAway Sports, Inc. 2014 | All Rights Reserved

20 THE "SwingAway®" PRODUCT IS PROTECTED UNDER US PATENTS 5,795,250 AND 7,914,400.
 SWI GAWAY
SPORTS PRODUCTS
MVP/XXL
ASSEMBLY MANUAL

Safety Precautions
The SwingAway® has been designed to be safe when used as intended; the swinging bat
is the most dangerous aspect of using the SwingAway®. To ensure safe operation with
maximum benefit, please read the following recommendations and review them with
anyone who will be working on or around the machine.
4 A batting helmet with NOC-SAE approval must be worn at all times when working on or
around this and any other mechanized baseball equipment.

4 Inspect all parts prior to each use. Do not use if there is any sign of wear or damage.
Balls and cords are subject to wear with use. The SwingAway® is designed to be
weatherproof; however, continual unprotected outside storage will accelerate deterioration of
components. Contact SwingAway directly for information on maintenance and replacement
parts.

4 Children using the SwingAway®, or in the area of use, under the age of 12 must be
supervised at all times.

4 Users must be aware of coaches and spectators in the surrounding area. We recommend
for outside use that 16' X 16' area be roped off around the area before use.

4 The SwingAway® net is a very effective rebounder. DO NOT use for "pepper" drills! In
other words, do not hit a loose ball into the net. Use only a baseball or softball which has been
properly attached to the SwingAway® and is in good condition.

4 Hit the ball towards the net only. Do not intentionally hit cords, net or frame. Closely
supervise beginners who may have trouble hitting the ball. Hitting the cord will accelerate cord
wear. Hitting the cord will direct the bat back towards the batter creating an unsafe condition.

4 Do not stand on or jump on the SwingAway®. Do not jump on the SwingAway® to dunk a
basketball.

4 Do not use the SwingAway® under the influence of any drugs or alcohol.

4 The SwingAway® can weigh approximately 32-55 pounds, depending on the model and
accessories. The Swingaway Pro Traveler can weigh up to 55lbs. Caution should be used
in lifting and moving it request help if necessary.

4 Attach and adjust all cords and tighten knobs before use. Hand-tighten knobs only -
over-tightening may cause damage to the tubing.

4 Always use the SwingAway® on level ground. Avoid wet or slippery areas.

4 When transporting the SwingAway®, ensure it is securely fastened on or inside your

vehicle.

4 Exercise caution when using the pitchback net. Throw the ball lightly into the net until a feel
is gained for how it rebounds.

Copyright © SwingAway Sports, Inc. 2014 | All Rights Reserved

THE "SwingAway®" PRODUCT IS PROTECTED UNDER US PATENTS 5,795,250 AND 7,914,400. 21
 S W I G AW A Y
SPORTS PRODUCTS
MVP/XXL
ASSEMBLY MANUAL
SWI GAWAY
SPORTS PRODUCTS

THANK YOU FOR YOUR PURCHASE OF THE SWINGAWAY HITTING STATION

IN APPRECIATION WE OFFER OUR NEW CUSTOMERS A ONE TIME COUPON FOR

20 % YOUR NEXT
OFF PURCHASE
ONLY FOR SWINGAWAY PRODUCTS AND ACCESSORIES AT
www.SWINGAWAY.com
*ENTER COUPON CODE AT CHECKOUT - SA1TIME20
*CUSTOMER MUST REGISTER WARRANY TO ACTIVATE COUPON
VALID FOR ONE TIME PURCHASE
COUPON IS VALID FOR SWINGAWAY PRODUCTS, PARTS, APPAREL AND ACCESSORIES
COUPON DOES NOT INCLUDE 3RD PARTY PRODUCTS

CHECK OUT THE NEW SWINGAWAY ZONE IN

A PROFESSIONAL PITCHING TARGET AND PRACTICE PARTNER

AND OTHER NEW PRODUCTS AT

www.SWINGAWAY.com
Copyright © SwingAway Sports, Inc. 2014 | All Rights Reserved
THE "SwingAway®" PRODUCT IS PROTECTED UNDER US PATENTS 5,795,250 AND 7,914,400.