For Your Convenience: This Caterpillar
File Is Shared By Diesel Parts Direct
YOUR ONE STOP SUPERSTORE FOR DIESEL ENGINE PARTS
SHOP NOW
Underground 3054
Mining T & TA
103-122 bhp /78-91 bkW
Equipment 2200-2400 rpm
CATERPILLAR® ENGINE SPECIFICATIONS
In-Line 4 Cylinder, Four-Stroke-Cycle Diesel
Bore — in (mm) . . . . . . . . . . . . . . . . . . . . . 3.94 (100)
Stroke — in (mm). . . . . . . . . . . . . . . . . . . . 5.00 (127)
Displacement — cu in (liter) . . . . . . . . . . . 243 (4.0)
Combustion System . . . . . . . . . . . . Direct injection
Rotation (from flywheel end) . . Counterclockwise
Capacity for Liquids — U.S. gal (L)
Cooling System (engine only)
DIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.9 (11.0)
DITA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.0 (11.4)
Lube Oil System (refill) typical. . . . . . . 3.5 (13.3)
Weight, Net Dry (approximate) — lb (kg)
Turbocharged (T). . . . . . . . . . . . . . . . . . . 614 (279)
Engine pictured with
Optional Equipment Turbocharged-Aftercooled (TA) . . . . . 627 (285)
Rated Engine Speed, Full Load
Intermittent — rpm . . . . . . . . . . . . . . . . . . . . . 2400
Continuous — rpm . . . . . . . . . . . . . . . . . . . . . 2200
BENEFITS
■ FUEL ECONOMY ■ HIGH PERFORMANCE
Consistent performance and excellent fuel Horsepower and torque capabilities
economy over entire operating range. optimized. Substantial 20 percent torque
rise.
■ BROAD APPLICATION RANGE
Big displacement, more performance for ■ CLEAN AND QUIET POWER
your money, and convenient installation. Cleaner and quieter, free from visible
smoke throughout operational speed range.
■ RELIABILITY AND DIESEL DURABILITY
Diesel tough components and conservative ■ EASY LOW-COST MAINTENANCE
speed for smooth operation and long Convenient positioning of service points on
engine life. right-hand side for easy accessibility.
FEATURES
Options must be selected for the following features. See your Caterpillar dealer for a detailed
description of options for each feature.
Adapter plate Fan and extensions Lubricating oil filter and cooler
Alternator Fan drive Lubricating oil pressure switch
Balancer Flywheel and starter ring Lubricating oil sump
Belt-driven auxiliaries Flywheel housing Paint
Cab heater connections Front end drives Radiator
Cold start aid Fuel filter Rating
Coolant pump and thermostat Fuel pre-filter Starter motor
housing Heater switch Stop and throttle controls
Coolant temperature gauge and Induction manifolds Timing case and gear-driven
sender Lifting eyes auxiliaries
Engine mountings Lubricating oil fillers and Turbocharger, manifolds
Exhaust manifolds breathers
3054 T & TA UNDERGROUND MINING EQUIPMENT
PERFORMANCE DATA
Turbocharged Turbocharged-Aftercooled
394 N•m (284 lb-ft) Intermittent Power 400
290 340 430 N•m (317 lb-ft) 460
270 310
Torque
Torque
250 280
lb-ft
lb-ft
N•m
N•m
325 360
230 354 N•m (257 lb-ft) 250 388 N•m (286 lb-ft)
Continuous Power
210 220
190 250 190 260
100 140
80.5 kW (108 bhp) 70
90 Intermittent Power 120 91 kW (122 bhp) 90
Intermittent Power
Power
80
Power
100
bkW
bhp
bhp
bkW
70 72.5 kW (97 bhp) 50 80 60
82 kW (110 bhp)
Continuous Power
60 60 Continuous Power
50 40 30
40 30 20
1000 1300 1600 1900 2200 2500 1000 1300 1600 1900 2200 2500
Engine Speed rpm Engine Speed rpm
MSHA CERTIFIED RATINGS
Vent Rate Particulate Index Emissions information:
Aspiration hp kW rpm cfm cum/min cfm/hp cfm cum/min cfm/hp 3054T MSHA Cert. # 7E-B027-0
3054TA MSHA Cert. # 7E-B020-0
T 108 81 2400 9000 255 83 9000 255 83
T 103 78 2200 7500 213 73 9000 255 87
TA 122 91 2300 10 000 284 82 7500 213 61
DIMENSIONS
30.4 in
772 mm
25.4 in 25.4 in
646 mm 646 mm
RATING DEFINITIONS AND CONDITIONS
Intermittent is the horsepower and speed Ratings are based on SAE J1995 standard
capability of the engine which can be used for conditions of 29.61 in Hg (100 kPa) and 77° F
about one hour, followed by an hour of (25° C). These ratings also apply at ISO3046/1,
operation at or below the continuous rating. DIN6271 and BS5514 standard conditions of
29.61 in Hg (100 kPa), 81° F (27° C) and 30%
Continuous is the horsepower and speed
relative humidity.
capability of the engine which can be used
without interruption or load cycling. Additional Fuel consumption is based on fuel oil having an
ratings are available for specific customer LHV of 18 390 Btu/lb (42 780 kJ/kg) and
requirements. weighing 7.001 lb/U.S. gal (838.9 g/liter). Power
ratings are based on engine equipped with fuel,
Additional ratings are available for specific
lube oil and jacket water pumps but without fan.
customer requirements. Consult your Caterpillar
dealer.
Materials and specifications are subject to change without notice. The International System of Units (SI) is used in this publication.
LEHH9259-01 (7-99) Printed in U.S.A. © 1999 Caterpillar Inc.
All rights reserved.
