SPECIFICATIONS Professional's Choice

GNSS Performance UHF Radio Characteristics

Channels 1598 TX\RX Transmitting and Receiving
GPS L1C/A, L2P, L1C, L2C, L5 Frequency Range 410-470MHz

K6
GLONASS G1, G2, G3 Protocols Farlink\Trimtalk\SOUTH(KOLIDA)
BeiDou B1I, B2I, B3I, B1C, B2a, B2b Channels 60 channels for Farlink protocol
Galileo E1, E5b, E5a, E6, E5AltBoc* 120 channels for other protocols
QZSS L1C/A, L5, L1C, L2
SBAS L1, L5 Hardware
IRNSS
L-Band*
L5*
B2b
Size 131mmX80mm See Better, Work better!
Weight 800g
Data Storage 4GB SSD internal storage
Positioning Accuracy
Support external USB storage
Code Differential Horizontal: ±0.25m+1ppm (up to 32GB)
GNSS Positioning Vertical: ±0.50+1ppm Automatic cycle storage
SBAS Positioning Typically<5m 3DRMS Changeable record interval
High Precition Static Horizontal: ±3mm+0.1ppm Up to 20Hz raw data collection
Vertical: ±3.5mm+0.4ppm Built-in Camera 2MP
Fast Static and Static Horizontal: ±2.5mm+0.5ppm Camera View Angle 75°
Vertical: ±5mm+0.5ppm Communication 5 Indicator lights (4 in front panel, one at bottom)
Post Processing Horizontal: ±8mm+1ppm 1 Button
Kinematic (PPK) Vertical: ±15mm+1ppm 1 Type C USB port
Real Time Kinematic Horizontal: ±8mm+1ppm 1 UHF antenna port
(RTK) Vertical: ±15mm+1ppm SOC OS
Network RTK (VRS, Horizontal: ±8mm+0.5ppm WEB UI
FKP, MAC) Vertical: ±15mm+0.5ppm WIFI: 802.11 b/g/n standard
RTK Initialization Time Time 2-8s, reliability >99.99% Bluetooth 4.2 standard and Bluetooth 2.1+EDR
Positioning Rate 1Hz-20Hz NFC
Inertial Measurement Supporting walk to activate IMU Supported USB, FTP, HTTP data communication
Tilt Angle: up to 60 degrees Voice Guide Intelligent voice technology provides status
Accuracy: down to 2cm indication and operation guide
(Typically less than 10mm+0.7mm/°tilt) Chinese, English, Korean, Russian, Portuguese,
Spanish, Turkish and user define
Data Formats Environment Operating: -30℃ to +70℃
Positioning Data NMEA 0183, PSIC, PJK, Binary Code Storage: -40℃ to +80℃
RTCM 2.1, RTCM 2.3, RTCM 3.0, Humidity 100% condensation
Differential Correction RTCM 3.1, RTCM 3.2,CMR,CMR+ Ingress Protection IP68 waterproof, sealed against sand and dust
Static STH, Rinex 2, Rinex 3 Shock Survive 2m pole drop on concrete
Network Supported VRS, FKP, MAC, Ntrip
Power
Operation Mode Battery 7.4V, 6800mAh unremovable battery
Base Base Internal Radio\ Base External Battery Life 10-15 hours
Radio (wireless Radio)\ Base wifi Fast Charge 4 hours charge to full power
Rover Rover UHF\ Rover Bluetooth USB recharge Power Bank for recharging/ Power Bank for
Static Static\ PPK external power supply

Field Software

Surv X
● Live-view Stakeout, Helps You to Capture Points Perfectly
K Survey Field Genius
● 1598 GNSS Channels, Best-in-class Signal Tracking Capability
● k-Fill, Keep Fixed Solution When Losing Correction Signal
● Farlink Radio with Optimized Working Range
GUANGDONG KOLIDA INSTRUMENT CO., LTD. ● New IMU Program, Walking to Initialize
Add: 7/F, South Geo-information Industrial Park, No.39 Si Cheng Road, Tian He IBD, Guangzhou 510663, China
Professional's Choice Tel: +86-20-22139033 Fax: +86-20-22139032 ● Weights Only 0.8 kg, IP68 Water-Dust Proof Level
Email: [email protected] [email protected] http://www.kolidainstrument.com
 Optimized for Use in Challenging Environments
AR GNSS + New IMU,
More Intelligence, Higher Efficiency!
“Farlink” Radio
Stakeout Intuitively with
Live-view Video Display
Transmitting and Receiving
This new feature combines real-time image display with When GNSS receiver is using signal of bigger number of
RTK positioning. K6 captures real-time video through satellites, the data amount to send and receive by UHF
its built-in camera, and users can directly see the points radio increased greatly. Farlink technology is developed
to be setout on the collector screen, which is accurate to send large number of data and avoid data loss.
and intuitive.
Farlink technology improves the signal-catching
sensitivity from -110db to -117db, so K6 can catch the
very weak signal from a base station far way.

“kFill” Save
RTK/ CORS Signal Loss
KOLIDA kFill technology is able to provide a 5 minutes
sustainable high accuracy service during temporary RTK
or CORS signal coverage outages.
Guide-line Powered by AR After RTK and CORS signal recovers, receiver will switch
to real-time corrections seamlessly.
AR technology superimposes a virtual guide-line and
distance numbers on the real-time video display. Users
do not need to recognize the directions themselves,
they only need to follow the guide-line to find the point
to be setout, which saves time and effort.
Smaller
but More Durable
Thanks to the high-capacity battery and the intelligent
power management plan, K6 can work up to 12 hours in
RTK radio rover mode, up to 15 hours in static mode. The
charging port is Type-C USB, users can choose KOLIDA
quick charger or their own smartphone charger to
recharge. Power bank also can be used as an external
power supply.

Simpler and Easier-to-Use 1598 Channels, Capture Ultra Light,

Inertial Tilt Measurement Satellites As Many As Possible Comfortable Experience
Many GNSS RTK systems require users to perform K6 is capable to track signal from 5 satellite
complex settings and calibration before doing inertial tilt constellations (GPS, Glonass, Beidou, Galileo, QZSS), K6 is an ultra light GNSS receiver that leaves the
measurement. process signal of up to 21 frequencies. competition behind. Its total weight is only 0.80 kg
including battery, 40% even 50% lighter than a traditional
After the latest program was applied to K6, users only When compared to traditional GNSS RTK, K6's GNSS receiver. The light-weight design reduces
need to walk a few steps to activate the inertial sensor. accuracy is higher, get fixed solution faster, the working surveyor’s fatigue, increase their mobility, is especially
This improvement makes measurements simpler and performance in forest and city center is better. helpful to work in challenging environment.
faster.
Ksurvey APP
Field Data Collection & Mapping: The Most Advanced is Here

Measure & Draw : Save Time in Field work and Office Visual Positioning : Industry-Leading Non-Contact Measurement Technology
This feature allows you to draw the result Photogrammetry Measurements can be
map while completing point measurements. conducted by taking pictures or videos.
Coordinates of all points in the photos can
• Before measuring points, users can be acquired.
choose the shape of the target object to be
measured from 11 preset figures. The • Now, target points that are inaccessible
software will guide you to measure points in due to dangerous environments, poor
an order and automatically connect lines and satellite signals, or impassable terrain can
complete the drawing of the figure. be measured remotely.

• The .dxf or .dwg maps created on-site can • The captured image data can also be
be used directly in office work. used with software like SGO, Pixel4D, DJI
Terra, and CC for 3D modeling.
• Users can assign measured objects with
different attributes, to different layers for • Image measurement data can also be
measurement and management, making no combined with drone measurement data to
mistakes. address issues of blurriness and
deformation in ground data models
collected by drones.
(This function only works with the receiver models
that have front-facing camera or dual-cameras)

CAD Draw : Drafting without a PC Static & PPK Measurement : More Assistance Now is Available
The software provides both static and PPK
This feature enables CAD drawing data collection capabilities.
capabilities, which were previously only
possible on a PC. Now surveyors can edit • Data can be downloaded wirelessly, no
CAD map on RTK controller or tablet or need for a PC and cables.
phones.
• It is possible to convert .sth files into
• CAD drawing does not require a computer. RINEX files right on the data collector or
tablet or your phone, no need of PC.
• CAD files prepared on office PCs can be
edited and managed by users on RTK data • Data can be shared with others through
collection terminals. mobile Internet.

• Drawing tools include up to 11 types of • The accuracy of PPK data collection is

figures and one type of text. as high as Trimble equipment, the result
can be directly imported for use in TBC.
Ksurvey APP
Stakeout: Lighten Your Load, Increase Your Output

CAD Stake-Out : Save Labor Cost and Reduce Errors Live-View Stake-Out : Faster, More Accurate, More Intelligent
Traditional data collection software requires Users utilize the real-time imagery
users to import points or lines to be setout captured by the camera at the bottom of
from .csv or .txt files, users need to spend the receiver and the AR guide lines
quite a lot of time to edit point and line displayed by the software, to locate the
libraries. target points.

Moreover, for complex shapes such as • When users perform stake-out with a
curves, circles, and polygons, the traditional dual-camera GNSS receiver, the software
stake-out process is complicated. Now, our can call upon both cameras to work
new CAD stake-out program offers a together. At medium to long distances, the
superior solution for surveyors. software uses the front-facing camera to
indicate the direction of travel, and at close
• No need for manual editing of point range, it uses the downward-facing camera
libraries. to find the specific location. This further
• Staking-out geometric shape is faster and increases the speed of staking out.
easier.
• AR guide lines can be displayed in point
• No need for obtaining coordinate files staking out, line staking out, and CAD
before work. Staking-out can be done with staking out programs.
just a CAD drawing. (This function only works with the receiver models
• Online maps and CAD drawings can be that have downward-facing camera or dual-cameras)
displayed simultaneously, improving
accuracy.
• AR guide lines make staking-out more
intuitive. Additional Features

Area Division : Developed for Professional Cadastral Survey and Stake Out Compatible Innovations
with Multiple Devices for Better User Experience
Select points to form a polygon, and directly
identify the area division points for the
 RTK Data Backup
surveyor to stake out. There is no more need
for the user to guess a position to measure,
and then to adjust.  QR Code Share

• Six methods of division to determine the  Multiple Basemap Support

area division points. The methods are
flexible and suitable to different user needs.
 Basemap Adjustment

• The graphic display is intuitive and  Network Mount Point Sorting

understandable.
 NMEA Output Setting

……

The App Now works with GNSS, Total Station, Echo

Sounder, GIS Tablet, in future it will work with SLAM
Scanner, Terrestrial Lidar Scanner.
KOLIDA Geo Office (KGO)
Ideal GNSS Data Processor, Help You To Keep Advancing

Data Processing & Reporting RINEX Import and Export

When surveyors need to do post-processing of This feature enables users to import the third
GNSS data, our software always can provide state- party GNSS receiver data into our software and
of-the-art technology to help you to produce optimal post-process it, by using the industry standard
results. RINEX format.

User just need to import field data, the software will

automatically process GNSS baselines.

Once results come out, the software can generate

reports.

High Accuracy Guaranteed 3D Modelling

RTK check, the unique function in our software, User can import photogrammetry image data into
can compare RTK and PPK results to the software, to achieve 3D modeling, visually
automatically acquire the most accurate presenting geographic information data such as
coordinates for each target point. coordinates, areas, and volumes.

It fills up the gap of poor corrections in RTK or Model data can be transformed into different
hindered observations in PPK. formats and applied with various coordinate
parameters based on actual needs, making it
This improvement is to provide guarantee for your adaptable to a wider range of application scenarios.
every survey.