How to write dump track 1 and 2

full tutorial

How to write dump track 1&2 full

tutorial
In this carding article we are going to learn Where and how you can buy dump track 1 and
2 with pin, credit card track 1 and 2 example How to write dumps track1 & track2 with/
without pin and how to use dumps.

At the end of this post if you have all necessary tool you will be able to create a card clone
take card to ATM machine and withdraw funds. As long as you have it PIN money will come
out. Another method is using POS machine to swipe in store after purchasing your items,
Cards are safe to use .

How to write and use dumps track 1/2

method guide
Don’t miss out on a opportunity to learn how to Cash out clones card in store or at
ATM
You must invest if you want to see progress. High quality dump+pins are hard to
obtain is very valuable information Worldwide.
There are two types of dumps
• Dump track 1
• Dump track 2

�101 with track 1 and 2. �201 with Track 1 track 2 and Pin With R-Emv

Where you can Buy Personalized Cloned Credit Cards w/ High Balances for in store
purchases or ATM cash out. Worldwide shipping Cloned Cards ATM All new
members, will receive 10% off their first order Now you can choose your bank
account from this list, I bought a Suntrust bank login so will choose SUNTRUST
Physical cards dealer. With balance. Deal private. Shipping included.

Requirements of writing track 1 / 2

with pin dumps
• Msr
• Emv software
• ATM hacking software
• Blank card
• Embosser

MSR The msr is linked to the emv software and ATM hacking software when you
are about to write the dumps with pin on a blank card.

EMV Software Then emv software makes the blanks card looks real and no one or
machine will be able to detect that it’s a clone card they will see it to be a real card
so no one can trace you or something. The emv software is a software which
protects the blank card and makes it look real. With that no atm will be able to
detect that the dumps with pin was written by yourself but it’s will make it look like
it was a card from the bank and also the emv software protects the card from any
region block. .without the emv software it is 50% that your dumps with pin is gone
work or not but with the use of the emv software when the dumps with pin don’t
work meaning the dumps is not legit

ATM Hacking Software The ATM HACKING SOFTWARE helps you to breaks the limit
of every ATM so you can cash out more than the ATM limit without no notice.
meaning you can cash out all the amount in the card with the use of the atm
hacking software

Blank CardThe blank card is what the dumps with pin is written on.

Embosser The embosser is what write the numbers of the dumps with pin on the
blank card.

Tools required to write dumps price

1. Msr for $50

2. Emv software for $100
3. ATM hacking software for $60
4. Embosser for $50
5. Blank card for $35$ for 200 pieces

That is the price for all the equipment you will need to make a clone card. Clone
card is also for $100 depending on the balance you want and fedex guy who will
bring it to your place.

Meaning if the clone card will be done linking the emv software and atm hacking
to the msr with the equipment listed above that will be the cost for
it..Understood...The balance on the clone card is 60$k and above as same as the
balance on the dumps with pin...When you order for the clone card and make cash
out of all the balance at ones cuz the atm hacking is linked then you come back
and order for the equipment with the some of the money cashed out from the
clone card which was sent to you, after the equipment ordered for you just have to
now order for just the dumps with pin and you will be taught how to make a clone
card so that very will be simple for you

In this section, I am going to teach you how t write dump track 1 & 2 Follow the
following step to write dump track 1 and 2:

Once you have installed, run the emv.exe as admin and enter the license key. The
license key is included in the .txt note file that comes with the software.

After you successful installations, connect the MCR200 hardware to your computer
and select hardware on the EMV software, then got Connect.

After you connect the MCR200, a pop-up comes on. Note, choose your card format
and click Check USD Port.

Note, select either MasterCard, Visa, etc. Depending on your card type.

Click the Generate ARQC button in the EMV software for a set of unique ARQC
keys.

Next, click Generate Master Key to generate a set of the master key.

Finally, mark the box that says Generate a New ICVV For Each Transaction.

Now, accept the EPI MXI credit debit and also accept the ARPC Key. Note that you
have to store the ARPC Key.

After you accept the options step above, use EMV Tag and ICVV.

Next, click Check ARQC KEY and Check Master Key.

In the following step, set the expiry date of the card including the month and year
only. You do not need the day because credit cards request month and year of
expiration only.

If you have the PIN, enter it at this stage. The PIN is not necessary though, but you
cannot use the card on ATM if you do not know the PIN. So, without the PIN, you
can use the card only for POS transactions.

I recommend using the card for POS only though.

Now, enter track 1 and track 2. Note that track 2 will carry ‘D’ instead of the regular
‘equal sign’ (=). For example, 514563446267380=12202040570004128900 will now be
514563446267380D12202040570004128900.

The difference is that I have replaced the ‘equal sign’ with D.

The reason I am changing the ‘equal sign’ (=) to D is because the EMV software
runs in .hex format and not in .txt because both POS and ATM run in .hex.

After you enter the track, click Valid. The computer will display a pop-up with the
information you have written on the card.

If everything is okay, click Burn Card. It should take about 2 minutes for the
computer to burn the data onto the EMV chip of the card.

When the burning process is complete, click Exit to exit the EMV software and
remove the card.

Note: Do not remove the card without exiting first.

10. Confirm the Card Data

Before you shut down the EMV software, confirm whether the card information is
correct.

Restart the software, connect your card to the MCR200, and click Read Card on the
interface of the EMV software. Within 1 minute, the EMV software will return the
data on the card.

If everything is okay, you may now use the ATM or a POS to cashout. A POS is
recommended though.

How to create Track 1 from Track 2

Dumps
In this section, I will teach you how to make track 1 from track 2 dumps. Before
you read down to this stage, I believe you came across the section I explained
track 2 dumps.

Anyways, our dump info in this article is

514563446267380=12202040570004128900 Chase Bank (USA) credit platinum.
514563446267380=12202040570004128900 is our Track 2. Now, I want to show you
how to make Track 1 from Track 2.

Bank Name » Chase Bank

Name of Card » John/Pat (first and last name)

Bank Country » USA

Credit or Debit » Credit (in the case of my card)

Card Type » Platinum

Note: If the track carries the ‘equal sign’ (=), it is Track 2. If it carried letter B, it is
Track 1 dump.

Below are the steps to make Track 1 from Track 2 dumps:

1. Write Out the Card Number

In the case of this tutorial, the card account number is 514563446267380 (the digits
before the ‘equal sign’ (=)).

2. Change the Equal Sign

Since we are making Track 1 from Track 2, we have to change the ‘equal sign’ (=) to
B. You will now have something like:

B514563446267380.

3. Add Cardholder Name

Next, add the name of the cardholder to converted Track using a caret sign (^). You
will now have the following:

B514563446267380^John/Pat^

Remember that the surname or last name comes first.

4. Add the Exp. Date

The expiry date is the year/month code (YYMM). Add it to the code above. In this
case, my YYMM is 1220 and it is the first 4 digits immediately after the ‘equal sign’
(=) in Track 2.

You should have the following:

B514563446267380^John/Pat^1220.

5. Add Service Code

The service code is the 3 digits immediately after the YYMM. In my case, the
service code is 204.

When you add it, it should be something like:

B514563446267380^John/Pat^1220204.

6. Add the Remaining Code

After adding the Service code, add the remaining codes. The remaining code could
be about 10, but in my case, it is more than 10. My remaining code is
0570004128900.

So, when I add the remaining code after the service code, I have the following:

B514563446267380^John/Pat^12202040570004128900.

7. Add 6 Zeros
After adding the remaining code (typically 10), I add 6 zeros.

My Track 1 becomes B514563446267380^John/Pat^12202040570004128900000000.

Note: My experiment does not work with the Amex card. It works o Visa and
MasterCard.

Conclusions
Cashing out dumps and with ATM or instore carding applies Worldwide, I’m sure
every carder have their own methods and approaches, so we will not state that we
are smarter than anyone else. The fastest and most productive way. Not everyone
can use this method, but for the general picture we have decided to share it.
remember NEVER WRITE ON THE CARD!!!! Lately COPS are instructed on different
signs to pay attention to in case of credit card detection. Use labels or mark the
cards and keep the PINS separately.

Thank you for reading our dump carding method,

ENJOY AND STAY SAFE