0% found this document useful (0 votes)
14 views7 pages

Baseefa 03atex0075

The document is an EU Type Examination Certificate (Baseefa03ATEX0075X - Issue 21) for SM87 Alarm Stations manufactured by Eaton MEDC Limited, confirming compliance with Directive 2014/34/EU for use in potentially explosive atmospheres. It details the product specifications, compliance with essential health and safety requirements, and specific conditions of use. The certificate also includes information on the product's design, construction, and relevant standards, along with a history of previous certificate issues.

Uploaded by

davilines2
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
14 views7 pages

Baseefa 03atex0075

The document is an EU Type Examination Certificate (Baseefa03ATEX0075X - Issue 21) for SM87 Alarm Stations manufactured by Eaton MEDC Limited, confirming compliance with Directive 2014/34/EU for use in potentially explosive atmospheres. It details the product specifications, compliance with essential health and safety requirements, and specific conditions of use. The certificate also includes information on the product's design, construction, and relevant standards, along with a history of previous certificate issues.

Uploaded by

davilines2
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

Certificate Number

Issued 14 November 2023


Baseefa03ATEX0075X
Page 1 of 7
Issue 21

1 EU - TYPE EXAMINATION CERTIFICATE


2 Equipment or Protective System Intended for use in Potentially Explosive Atmospheres
Directive 2014/34/EU
3 EU - Type Examination Certificate Baseefa03ATEX0075X – Issue 21
Number:
3.1 In accordance with Article 41 of Directive 2014/34/EU, EC-Type Examination Certificates referring to 94/9/EC that were in
existence prior to the date of application of 2014/34/EU (20 April 2016) may be referenced as if they were issued in accordance
with Directive 2014/34/EU. Supplementary Certificates to such EC-Type Examination Certificates, and new issues of such
certificates, may continue to bear the original certificate number issued prior to 20 April 2016.
4 Product: SM87 Alarm Stations
5 Manufacturer: Eaton MEDC Limited
6 Address: Unit B, Sutton Parkway, Oddicroft Lane, Sutton-in-Ashfield, NG17 5FB
United Kingdom
7 This re-issued certificate extends EC Type Examination Certificate No. Baseefa03ATEX0075 to apply to product designed and
constructed in accordance with the specification set out in the Schedule of the said certificate but having any variations specified
in the Schedule attached to this certificate and the documents therein referred to.
8 SGS Fimko Oy, Notified Body number 0598, in accordance with Article 17 of Directive 2014/34/EU of the European Parliament
and of the Council, dated 26 February 2014, certifies that this product has been found to comply with the Essential Health and
Safety Requirements relating to the design and construction of products intended for use in potentially explosive atmospheres
given in Annex II to the Directive.
8.1 The original certificate was issued by SGS Baseefa Ltd (UK Notified Body 1180). It, and any supplements previously issued by
SGS Baseefa Ltd have been transferred to the supervision of SGS Fimko Oy (EU Notified Body 0598). The original certificate
number is retained.
The examination and test results are recorded in confidential Report No. See certificate history.
9 Compliance with the Essential Health and Safety Requirements has been assured by compliance with:
EN IEC 60079-0:2018 EN 60079-1:2014 EN 60079-31:2014
except in respect of those requirements listed at item 18 of the Schedule.
10 If the sign “X” is placed after the certificate number, it indicates that the product is subject to the Specific Conditions of Use
specified in the schedule to this certificate.
11 This EU - TYPE EXAMINATION CERTIFICATE relates only to the design and construction of the specified product. Further
requirements of the Directive apply to the manufacturing process and supply of this product. These are not covered by this
certificate.
12 The marking of the product shall include the following:

II 2 GD Ex db IIC T* Gb Tamb -55°C to +**°C Ex tb IIIC T**°C Db IP66/67 Tamb -55°C to +**°C

SGS Fimko Oy Customer Reference No. 0676 Project File No. 22/0235

This document is issued by the Company subject to their General Conditions for Certification Services accessible at http://www.sgs.com/en/Terms-and-
Conditions.aspx . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is
advised that information contained herein reflects the Company’s findings at the time of their intervention only and within the limits of Client’s instructions,
if any. It does not necessarily indicate that the equipment may be used in particular industries or circumstances. The Company’s sole responsibility is to
its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations un der the transaction documents.
This document cannot be reproduced except in full, schedule included, without prior written approval of the Company. Any unauthorized alteration, forgery
or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law .

SGS Fimko Oy
Takomotie 8
FI-00380 Helsinki, Finland
Telephone +358 (0)9 696 361
e-mail [email protected]
web site www.sgs.fi Mikko Välimäki
Business ID 0978538-5 Member of the SGS Group (SGA SA) SGS Fimko Oy
BAS-CERT-081 SGS Baseefa Limited is an associate of SGS Fimko OY Issue 3
Certificate Number
Issued 14 November 2023
Baseefa03ATEX0075X
Page 2 of 7
Issue 21

13 Schedule
14 Certificate Number Baseefa03ATEX0075X – Issue 21

15 Description of Product
The Range of SM87 Alarm Stations comprises a cylindrical enclosure a square base with an irregular shaped cover secured
by 4 off screws of grade A4-70 or A4-80 stainless steel. The base and cover may be manufactured from either aluminium or
stainless steel.

The cover is fitted with an actuator mechanism which may be operated by either a push button or break glass function
dependant on the external actuator assembly.

The units may be supplied by the manufacturer in an assembly of up to five interconnected enclosures using cable bushings
to EPS13ATEX1619U.

The range of Type SM87 Alarm Stations comprises:-

Type BGLD – A Breakglass unit with latching mechanism The interior of the enclosure comprises up to two micro-switches,
mounted on the inside of the cover, and up to twelve rail mounted terminals fitted to the enclosure base, and rated up to 24V,
2A.

Type LBGLD - A Breakglass unit with protective lift flap and latching mechanism. The interior and rating as per the Type
BGLD.

Type PBLD – A Push Button unit with latching mechanism. The interior and rating as per the Type BGLD.

Type PBMD – A Push button unit with momentary mechanism. The interior and rating as per the Type BGLD.

Type SM87 EOL Unit A – The interior comprises up to two micro-switches, mounted on the inside of the cover, and up to
twelve rail mounted terminals fitted to the enclosure base with the addition of an end of line module rated 24V 0.5A.

Type SM87 Addressable Unit B –The interior comprises up to two micro-switches, mounted on the inside of the cover and a
Servoteknikk addressable callpoint PCB, rated up to 24V 0.5A.

Type SM87 Addressable Unit G –The interior comprises up to two micro-switches, mounted on the inside of the cover and a
Tyco addressable callpoint PCB, rated up to 24V 0.5A.

Type SM87 Addressable Unit F – The interior comprises up to two micro-switches, mounted on the inside of the cover and
an Autronica addressable callpoint PCB, rated up to 24V 0.5A.

Type SM87 XP950 Module Unit – The interior comprises up to two micro-switches, mounted on the inside of the cover and
an Apollo PCB, rated up to 24V 1.0A.

Type SM87 Addressable Unit H - The interior comprises a Hochiki addressable callpoint PCB and up to 7 terminals rated at
up to 24V 0.2A.

Type SM87 Addressable Unit J - The interior comprises a Ziton addressable module, up to 5 terminals and 2 x 2.5W resistors
rated at up to 24V 0.1A, 7W.

Type SM87PBD MCR-CUBE EOL Unit – an SM87 Alarm Station with switches mounted on the underside of the cover and
an end of line (EOL) module and terminals mounted in the base, rated up to 24V, 0.5A.

Type SM87 Omron Relay Unit A – Type SM87 Alarm Station comprising an alternative interior which includes a relay
callpoint, Omron Type SPDT G2R and up to 6 Weidmuller AKZ 1.5 terminals, rated up to 24V, 2A.

Type SM87 Addressable Unit C - SM87 Alarm Station with switches mounted on the underside of the cover and an alternative
addressable printed circuit board (PCB) mounted in the base, rated up to 28V, 0.5A

BAS-CERT-081 SGS Baseefa Limited is an associate of SGS Fimko OY Issue 3


Certificate Number
Issued 14 November 2023
Baseefa03ATEX0075X
Page 3 of 7
Issue 21

Type SM87 Addressable Module G – with switches mounted on the underside of the cover and an alternative addressable
Tyco module mounted in the base, rated up to 24V, 0.02A.

Type SM87 Addressable Module I – with switches mounted on the underside of the cover and an alternative addressable
Apollo module mounted in the base, rated up to 24V, 0.02A.

Type SM87 Addressable Module K – with switches mounted on the underside of the cover and an alternative addressable
Tyco module mounted on the base, rated up to 24V, 0.1A.

The alarm stations are coded:-


Ex db IIC T6 Gb Tamb -55°C to +55°C
Ex tb IIIC T85°C Db IP66/67 Ta -55°C to +55°C
Or
Ex db IIC T5 Gb Tamb -55°C to +70°C
Ex tb IIIC T100°C Db IP66/67 Ta -55°C to +70°C

Cable entry holes are provided as specified on the certified drawings for the accommodation of flameproof cable entry devices,
with or without the interposition of a flameproof thread adapter. Unused entries are to be fitted with suitable certified
flameproof stopping plugs.
The cable entry devices, thread adapters and stopping plugs shall be suitable for the equipment, the cable and the conditions
of use and shall be certified as Equipment (not a Component) under an EC Type Examination Certificate to Directive
2014/34/EU.

When used in an explosive dust atmosphere the cable entry devices shall maintain the ingress protection of the enclosure.

16 Report Number
See certificate history.

17 Specific Conditions of Use


1. Potential electrostatic charging hazard – see instructions.

18 Essential Health and Safety Requirements


In addition to the Essential Health and Safety Requirements (EHSRs) covered by the standards listed at item 9, the following
are considered relevant to this product, and conformity is demonstrated in the report:
Clause Subject

1.2.7 LVD type requirements

1.2.8 Overloading of equipment (protection relays, etc.)

1.4.1 External effects

1.4.2 Aggressive substances, etc.

BAS-CERT-081 SGS Baseefa Limited is an associate of SGS Fimko OY Issue 3


Certificate Number
Issued 14 November 2023
Baseefa03ATEX0075X
Page 4 of 7
Issue 21

19 Drawings and Documents


New drawings submitted for this issue of certificate:
Number Sheet Issue Date Description

562-774 1-2 F 08-08-23 ATEX Certification Detail SM87BGLD, SM87PBLD,


SM87LBGLD & PBMD
562-778 1 B 08-08-23 SM87BG ATEX Certification Label
562-779 1 B 08-08-23 SM87PB ATEX Certification Label

Current drawings which remain unaffected by this issue:


Number Sheet Issue Date Description
562-775 1&2 E 12/12/19 SM87PBD SM87BGD ATEX OPTIONAL MODULE
DETAILS
562-851 A 25.11.10 General Arrangement, SM87PBD MCR-CUBE EOL
UNIT

20 Certificate History
Certificate No. Date Comments
Baseefa03ATEX0075 09 May 2006 The release of the prime certificate. The associated test and
assessment against the requirements of EN 50014:1997 +
Amendments 1 & 2, EN 50018:2000 + Amendment 1, EN 50281-1-
1:1998 is documented in Test Report No. 02(C)0226.
Baseefa03ATEX0075/1 27 January 2004 Alternative arrangement comprising an SM87 Alarm Station with
switches mounted on the underside of the cover and an addressable
printed circuit board (PCB) mounted in the base.
In this form the unit is designated a SM87 ADDRESSABLE UNIT
B and is rated up to 24V, 0.5A with a revised Temperature
Classification of T85°C (Tamb = -55°C to +55°C) or T100°C (Tamb
= -55°C to +70°C).
No report.
Baseefa03ATEX0075/2 27 January 2004 Alternative arrangement comprising an SM87 Alarm Station with
switches mounted on the underside of the cover and an alternative
addressable printed circuit board (PCB) mounted in the base.
In this form the unit is designated a SM87 ADDRESSABLE UNIT
F and is rated up to 24V, 0.5A with a revised Temperature
Classification of T85°C (Tamb = -55°C to +55°C) or T100°C (Tamb
= -55°C to +70°C).
No report.
Baseefa03ATEX0075/3 29 January 2004 Alternative arrangement comprising an SM87 Alarm Station with
switches mounted on the underside of the cover and an alternative
addressable printed circuit board (PCB) mounted in the base.
In this form the unit is designated a SM87 ADDRESSABLE UNIT
G and is rated up to 24V, 0.5A with a revised Temperature
Classification of T85°C (Tamb = -55°C to +55°C) or T100°C (Tamb
= -55°C to +70°C).
No report.

BAS-CERT-081 SGS Baseefa Limited is an associate of SGS Fimko OY Issue 3


Certificate Number
Issued 14 November 2023
Baseefa03ATEX0075X
Page 5 of 7
Issue 21

Certificate No. Date Comments


Baseefa03ATEX0075/4 25 August 2005 To note change in type reference of the addressable callpoint. No
report.
Baseefa03ATEX0075/5 14 October 2005 Alternative arrangement comprising an SM87 Alarm Station with
switches mounted on the underside of the cover and an alternative
printed circuit board mounted in the base.
In this form the unit is designated a SM87 XP950 MODULE UNIT
and is rated up to 24V, 1A with a revised Temperature Classification
of T85°C (Tamb = -55°C to +55°C).
No report.
Baseefa03ATEX0075/6 05 December 2005 Alternative rating of 48V, 1A for the SM87 Alarm Stations, together
with a change to the optional internal resistors. No report.
Baseefa03ATEX0075/7 14 September 2006 Alternative arrangement comprising an SM87 Alarm Station with
switches mounted on the underside of the cover and up to 12 rail
mounted terminals and an end of line (EOL) device mounted in the
base.
In this form the unit is designated a SM87PBD EOL UNIT A and is
rated up to 24V, 0.5A with a Temperature Classification of T85°C
(Tamb = -55°C to +55°C) or T100°C (Tamb = -55°C to +70°C).
No report.
Baseefa03ATEX0075/8 10 October 2007 Optional addition of an indicator LED and window assembly to the
cover of the push-button and break-glass units. Baseefa certification
report 04(C)0562 refers.
Baseefa03ATEX0075/9 07 July 2008 To permit an optional transient voltage suppressor rated up to 5W.
No report.
Baseefa03ATEX0075/10 07 January 2009 Alternative arrangement comprising an SM87 Alarm Station with an
addressable callpoint mounted on the underside of the cover and an
addressable printed circuit board (PCB) module and terminals
mounted in the base.
In this form the unit is designated a SM87 ADDRESSABLE UNIT
H and is rated up to 24V, 0.02A with a Temperature Classification
of T85°C (Tamb = -55°C to +55°C) or T100°C (Tamb = -55°C to
+70°C).
No report.
Baseefa03ATEX0075/11 17 April 2009 Alternative arrangement comprising an SM87 Alarm Station with
switches mounted on the underside of the cover and an addressable
printed circuit board (PCB) module and terminals mounted in the
base.
In this form the unit is designated a SM87 ADDRESSABLE UNIT
J and is rated up to 24V, 0.1A with a Temperature Classification of
T85°C (Tamb = -55°C to +55°C) or T100°C (Tamb = -55°C to
+70°C).
No report.
Baseefa03ATEX0075/12 27 September 2010 To amalgamate the current design and previous variations into one
revised set of drawings. No technical changes were carried out. SGS
Baseefa certification report GB/BAS/ExTR09.0084/00 refers.

BAS-CERT-081 SGS Baseefa Limited is an associate of SGS Fimko OY Issue 3


Certificate Number
Issued 14 November 2023
Baseefa03ATEX0075X
Page 6 of 7
Issue 21

Certificate No. Date Comments


Baseefa03ATEX0075/13 23 December 2010 Alternative arrangement comprising an SM87 Alarm Station with
switches mounted on the underside of the cover and an end of line
(EOL) module and terminals mounted in the base.
In this form the unit is designated a SM87PBD MCR-CUBE EOL
UNIT and is rated up to 24V, 0.5A.
No report.
Baseefa03ATEX0075/14 10 May 2012 Variation to the Type SM87 Alarm Station comprising an alternative
interior which includes a relay callpoint, Omron Type SPDT G2R
and up to 6 Weidmuller AKZ 1.5 terminals.
In this form the unit is designated a Type SM87 Omron Relay Unit
A and is rated up to 24V, 2A.
No report.
Baseefa03ATEX0075/15 4 October 2013 To increase the number of resistors rated at up to 470Ω and 0.6W
installed in the SM87 from 4 to a maximum of 6 without any increase
in power dissipation. SGS Baseefa report GB/BAS/ExTR13.0225/00
refers.
Baseefa03ATEX0075/16 15 October 2013 Alternative arrangement comprising an SM87 Alarm Station with
switches mounted on the underside of the cover and an alternative
addressable printed circuit board (PCB) mounted in the base.
In this form the unit is designated a SM87 Addressable Unit C and
is rated up to 28V, 0.5A with a Temperature Classification of T85°C
(Tamb -55°C to +55°C) or T100°C (Tamb -55°C to +70°C).
SGS Baseefa certification report GB/BAS/ExTR13.0232/00 refers.
Baseefa03ATEX0075/17 20 January 2014 Increase in the maximum number of rail mounted terminals to
thirteen. SGS Baseefa certification report GB/BAS/ExTR14.0022/00
refers.
Baseefa03ATEX0075/18 22 January 2015 Alternative arrangement comprising an SM87 Alarm Station with
switches mounted on the underside of the cover and an alternative
addressable Tyco module mounted in the base.
In this form the unit is designated a SM87 Addressable Module G
and is rated up to 24V, 0.02A with a Temperature Classification of
T85°C (Tamb -55°C to +55°C) or T100°C (Tamb -55°C to +70°C).
Alternative arrangement comprising an SM87 Alarm Station with
switches mounted on the underside of the cover and an alternative
addressable Apollo module mounted in the base.
In this form the unit is designated a SM87 Addressable Module I
and is rated up to 24V, 0.02A with a Temperature Classification of
T85°C (Tamb -55°C to +55°C) or T100°C (Tamb -55°C to +70°C).
No report.
Baseefa03ATEX0075/19 23 June 2015 Addition of alternative terminal Type Weidmuller AKZ1.5 to the
existing list of terminals;
Type Max Number
Weidmuller AKZ4 12
AKZ1.5 13
AKZ2.5 13
Phoenix MBK up to 2.5mm 13

SGS Baseefa certification report GB/BAS/ExTR15.0189/00 refers.

BAS-CERT-081 SGS Baseefa Limited is an associate of SGS Fimko OY Issue 3


Certificate Number
Issued 14 November 2023
Baseefa03ATEX0075X
Page 7 of 7
Issue 21

Certificate No. Date Comments


Baseefa03ATEX0075/20 31 January 2020 To introduce an alternative arrangement comprising an SM87 Alarm
Station with switches mounted on the underside of the cover and an
alternative addressable Tyco module mounted on the base.
In this form the unit is designated a SM87 Addressable Module K
and is rated up to 24V, 0.1A with a temperature classification of
T85°C (Tamb -55°C to +55°C) or T100°C (Tamb -55°C to +70°C).
SGS Baseefa certification report 20(C)0064 refers.
Baseefa03ATEX0075X 14 November 2023 To assess the SM87 Alarm Stations against EN IEC 60079-0:2018,
EN 60079-1:2014 and EN 60079-31:2014. SGS Baseefa certification
Issue 21
report GB/BAS/ExTR22.0113/00 refers.
For drawings applicable to each issue, see original of that issue.

BAS-CERT-081 SGS Baseefa Limited is an associate of SGS Fimko OY Issue 3

You might also like