Summay of Cost for "New Academic Block up to 2nd floor with Auditorium Structure” at

Motilal Nehru College (University of Delhi), Benito Juarez Marg, New Delhi"

Abstract of Cost

S. No. Sub Head DSR Amount MR Amount Remarks

1 Civil Works ₹ 7,36,44,047.60 ₹ 29,77,345.00

Electrical Works including

2 ₹ 23,58,973.00 ₹ 10,19,636.00
fire alarm system

Total ₹ 7,60,03,020.60 ₹ 39,96,981.00

DSR + MR A ₹ 8,00,00,001.60

Digitally signed by
CHANDRESH KUMAR
Date: 2025.03.07 19:05:47 IST
 MOTILAL NEHRU COLLEGE, SOUTH CAMPUS , UNIVERSITY OF DELHI ,BENITO JUAREZ MARG NEW DELHI
Name of Work: CONSTRUCTION OF AUDITORIUM WITH ACADEMIC BLOCK AT MOTI LAL NEHRU COLLEGE

BILL OF QUANTITY (BOQ)

CIVIL WORK
Sl No DSR 2023 Description of items Unit Quantity Rate Amount as per DSR Amount as per MR
1 1 CARRIAGE OF MATERIALS
Carriage of earth by mechanical transport including loading, unloading and stacking -
1.1.2 Cum 102.00 326.68 33,321.36
upto 5 km lead
2 2 EARTH WORK
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means
over areas (exceeding 30 cm in depth, 1.5 m in depth as well as 10 sq m on plan )
2.01 2.6
including getting out and disposal of excavated earth lead upto 200 m and lift upto 1.5
m, as directed by Engineer-in-charge.
2.6.1 All kinds of soil cum 1,886.18 177.50 3,34,796.95
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means
over areas (exceeding 30 cm in depth, 1.5 m in depth as well as 10 sq m on plan )
2.02 2.7
including getting out and disposal of excavated earth lead upto 200 m and lift upto 1.5
m, as directed by Engineer-in-charge.
2.7.3 Hard rock (blasting prohibited) cum 1,886.18 1,432.95 27,02,801.63
2.03 Hard rock (blasting prohibited)
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations
2.25 etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by cum 3,281.58 196.00 6,43,189.68
ramming and watering, lead up to 50 m and for any lift
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated
2.04 2.26
or stacked materials.
2.26.1 All kinds of soil Cum 645.00 126.80 81,786.00
Supplying and filling in plinth with sand under floors, including watering, ramming,
2.05 2.27 Cum 178.00 2,123.75 3,78,027.50
consolidating and dressing complete.

Supplying chemical emulsion in sealed containers including delivery as specified. 2.34.1

2.06 2.34.1 Litre 1,446.69 234.75 3,39,610.48
Chlorpyriphos/ Lindane emulsifiable concentrate of 20%

Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300
2.07 2.35.3.1 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2
(1 cement : 2 Coarse sand) to match the existing floor :
2.35.3.1 With Chlorpyriphos/Lindane E.C. 20% with 1% concentration sqm 1,500.00 310.05 4,65,075.00
3 4 CONCRETE WORK
Providing and laying in position cement concrete of specified grade excluding the cost of
3.01 4.1 -
centering and shuttering - All work up to plinth level :
4.1.8 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). cum 88.00 6,812.00 5,99,456.00
Providing and laying cement concrete in retaining walls, return walls, walls (any
thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,
3.02 4.2 buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain
window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of
centering, shuttering and finishing :
4.2.3 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Cum 12.00 9,895.20 1,18,742.40
1:3:6 (1 cement : 3 coarse sand derived from natural sources : 6 graded stone
3.03 4.2.5 Cum 12.00 9,311.40 1,11,736.80
aggregate 20 mm nominal size derived from natural sources)
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1
3.04 4.11 cement : 2 coarse sand (zone-III)derived from natural sources: 4 graded stone Sqm 123.00 410.85 50,534.55
aggregate 20 mm nominal size derived from natural sources)
Per 50
Extra for providing and mixing water proofing material in cement concrete work in doses
3.05 4.12 kg 12.00 18.15 217.80
by weight of cement as per manufacturer's specification.
cement
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of
3.06 4.13 approved quality using 1.7kg per square metre on damp proof course after cleaning the Sqm 123.00 146.15 17,976.45
surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse
sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick
3.07 4.17 Sqm 212.00 749.30 1,58,851.60
ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand,
including necessary excavation, levelling & dressing & finishing the top smooth.
4 5 R.C.C. WORK
4.1 5.9 Centering and shuttering including strutting, propping etc. and removal of form for :
4.1.1 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete. sqm 502.15 392.15 1,96,918.12
Walls (any thickness) including attached pilasters, butteresses,
4.1.2 5.9.2 sqm 380.19 842.50 3,20,310.08
plinth and string courses etc.
Suspended floors, roofs, landings, balconies and access
4.1.3 5.9.20 sqm 2,461.57 1,028.40 25,31,478.59
platform
4.1.4 5.9.21 Lintels, beams, plinth beams, girders, bressumers and cantilevers. sqm 2,748.19 841.95 23,13,834.36
4.1.5 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts sqm 724.27 961.30 6,96,237.63
4.1.6 5.9.7 Stairs, (excluding landings) except spiral-staircases sqm 205.70 764.95 1,57,350.22
Weather shade, Chajjas, corbels etc., including edges with water proof ply 12 mm thick
4.1.7 5.9.19 Sqm 124.00 951.10 1,17,936.40
in exposed RCC finish
4.1.8 5.9.14 Extra for shuttering in circular work (20% of respective centering and shuttering items) Sqm 29.00 78.43 2,274.47
4.1.9 5.9.4 Shelves (Cast in situ) Sqm 34.00 927.25 31,526.50
Extra for additional height in centering, shuttering where ever required with adequate
bracing, propping etc., including cost of de-shuttering and decentering at all levels, over
4.1.10 5.11
a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be
measured).
4.1.11 5.11.1 Suspended floors, roofs, landing, beams and balconies (Plan area to be measured) Sqm 623.00 384.30 2,39,418.90
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in
4.2 5.22
position and binding all complete upto plinth level.
5.22.6 Thermo-Mechanically Treated bars. kilogram 1,33,500.79 107.85 1,43,98,060.20
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in
4.3 5.22A
position and binding all complete upto floor III level
5.22A.6 Thermo-Mechanically Treated bars. kilogram 1,27,734.17 107.85 1,37,76,130.23

Add for plaster drip course/ groove in plastered surface or moulding to R.C.C.
4.4 5.30 Metre 1,012.00 78.40 79,340.80
projections.

Providing and laying in position ready mixed or site batched design mix cement
concrete for reinforced cement concrete work, using coarse aggregate and fine
aggregate derived from natural sources. Portland Pozzolana/ Ordinary Portland/Portland
slag Cement, admixtures in recommended proportions as per IS:9103 to accelerate
/retard setting of concrete, to improve durability and workability without impairing
strength: including pumping of concrete to site of laying, curing, carriage, for all leads:
4.5 5.33
but excluding the cost of centering, shuttering, finishing and reinforcement as per
direction of the engineer-in-charge, for the following grades of Concrete.
Note : Extra cement up to 10% of the minimum specified cement content in design mix
shall be payable separately. In case the cement content in design mix is more than
110% of the specified minimum cement content, the Contractor shall have discretion to
either re-design the mix or bear the cost of extra cement.
5.33.1 All works upto plinth level
5.33.1.2 Concrete of M30 grade with minimum cement content of 350 kg /cum Cum 1,019.09 9,655.70 98,40,027.31
4.6.1 All works above Plinth level upto floor V level
5.33.2.2 Concrete of M30 grade with minimum cement content of 350 kg /cum Cum 975.07 10,011.35 97,61,767.04

Supplying and applying pre tested and approved water based concrete curing compound
to concrete/ masonry surface, all as per manufacturer’s specification and direction of
4.6.2 5.41.1 Sqm 206.60 69.05 14,265.73
Engineer-in-charge
Non pigmented wet curing compound

Providing and fixing in position Stainless steel Grade 304 plate-1.0 mm thick as per
4.7 5.43
design for expansion joints.
5.43.1 200 mm wide. metre 128.00 859.75 1,10,048.00

Digitally signed by
Pages 1 of 9 CHANDRESH KUMAR
Date: 2025.03.07 19:05:47 IST
Sl No DSR 2023 Description of items Unit Quantity Rate Amount as per DSR Amount as per MR
Providing and fixing of expansion joint system related with floor location as per drawings
and direction of Engineer-In-Charge. The joints system will be of extruded aluminum
base members, self aligning / self centering arrangement and support plates etc. as per
ASTM B221-02. The system shall be such that it provides floor to floor /floor to wall
expansion control system for various vertical localtion in load application areas that
accommodates multi directional seismic movement without stress to it's components.
System shall consist of metal profiles with a universal aluminum base member designed
to accommodate various project conditions and finish floor treatments. The cover plate
4.8 5.44 shall be designed of width and thickness required to satisfy projects movement and
loading requirements and secured to base members by utilizing manufacturer’s pre-
engineered self- centering arrangement that freely rotates / moves in all directions. The
Self - centering arrangement shall exhibit circular sphere ends that lock and slide inside
the corresponding aluminum extrusion cavity to allow freedom of movement and flexure
in all directions including vertical displacement. Provision of Moisture Barrier Membrane
in the Joint System to have watertight joint is mandatory requirement all as per the
manufactures design and as approved by Engineer -in- Charge. (Material shall confirm
to ASTM 6063).
5.44.1 Floor Joint of 100 mm gap metre 54.00 6,392.55 3,45,197.70
Providing and fixing of expansion joint system related with wall joint (internal/ external)
location as per drawings and direction of Engineer-In- Charge. The joints shall be of
extruded aluminum base members, self aligning / centering arrangement and support
plates as per ASTM B221- 02. The material shall be such that it provides an Expansion
4.9 5.45 Joints System suitable for vertical wall to wall/ wall to corner application, both new and
existing construction in office Buildings & complexes with no slipping down tendency
amongst the components of the Joint System. The Joint System shall utilize light weight
aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap
locking the multicellular to facilitate movement. (Material shall confirm to ASTM 6063).
5.45.1 Wall Joint of 100 mm gap metre 68.00 5,305.65 3,60,784.20
Providing and fixing of expansion joint system of approved make and manufactures for
various roof locations as per approved drawings and direction of Engineer-In-Charge.
The joints shall be of extruded aluminum base members with, self aligning and self
centering arragement support plates asper ASTM B221-02. The system shall be such
that it provides watertight roof to roof/roof to corner joint cover expansion control
system that is capable of accommodating multidirectional seismic movement without
4.10 5.46 stress to its components. System shall consist of metal profile that incorporates a
universal aluminum base member designed to accommodate various project conditions
and roof treatments. The cover plate shall be designed of width and thickness required
to satisfy movement and loading requirements and secured to base members by
utilizing manufacturer’s pre-engineered self-centering arrangement that freely rotates /
moves in all directions. The Self centering arrangement shall exhibit circular sphere ends
that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom
5.46.1 Roof Joint of 100 mm gap metre 75.00 5,985.70 4,48,927.50
5.0 6 BRICK WORK
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5
5.1 6.1
in foundation and plinth in:
6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 118.00 7,132.25 8,41,605.50
Brick work with common burnt clay machine moulded F.P.S. (non modular) bricks of
class designation 12.5 in cement mortar 1:6 (1 cement : 6 coarse sand)in exposed
brick work WITHOUT ANY MORTAR ON FACE OR FRONT EDGES OF BRICKS including
5.2 6.29.2 making horizontal and vertical grooves 10 mm wide 12 mm deep RECESSED POINTING Cum 185.58 9,481.70 17,59,613.89
IN 1:3 Cement Mortar( 1 cement:3 Fine sand mixed with water proofing compound)
complete. THE BRICK WORK CAN BE IN FLEMISH BOND, RAT-TRAP BOND OR ENGLISH
BOND AS PER DRAWINGS

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5
5.3 6.4
in superstructure above plinth level up to floor V level in all shapes and sizes in :
6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 279.87 9,105.95 25,48,482.23
Analysed on Providing and filling AAC blocks including proper watering and compaction in sunken
5.4 Cum 54.00 3,202.00 1,72,908.00
DSR areas all complete as per drawings and as directed by the Engineer-in-chargein-Charge.
Half brick masonry with F.P.S. bricks of class designation 75 in superstructure above
5.5 6.13
plinth level up to floor V level.
6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) sqm 279.87 1,123.80 3,14,517.91
Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third
5.6 6.15 sqm 279.87 104.80 29,330.38
course of half brick masonry (with F.P.S. bricks).
6 8 MARBLE WORK
Providing and fixing 18mm thick gang saw cut mirror polished premoulded and
prepolished) machine cut for flooring, staircase treads , riers and landings, kitchen
platforms, vanity counters, window sills , facias and similar locations of required size of
6.1 8.2 approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1
cement : 4 coarse sand) with joints treated with white cement, mixed with matching
pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edge to
give high gloss finish etc. complete at all levels.
Granite stone slab of colur black, Cherry/ ruby red
8.2.2.2 Area of slab over 0.50 sqm sqm 30.48 5,136.30 1,56,554.42
Extra for providing edge moulding to 18mm thick marble stone counters, Vanities etc.
6.2 8.3 including machine polishing to edge to give high gloss finish etc. complete as per design
approved by Engineer-in-Charge.
8.3.2 Granite of any colour and shade metre 30.45 510.95 15,558.43
Extra for fixing marble /granite stone over and above corresponding basic item, in facia
6.3 8.4 and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc. metre 30.40 568.55 17,283.92
complete.
Extra for providing opening of required size & shape for wash basin/ kitchen sink in
kitchen platform, vanity counter and similar location in marble/ Granite/ stone work,
6.4 8.5 Each 22.00 978.70 21,531.40
including necessary holes for pillar taps etc. including moulding, rubbing and polishing of
cut edges etc. complete.
Mirror polishing on marble work/Granite work/stone work where ever required to give
6.5 8.6 sqm 30.48 506.70 15,444.22
high gloss finish complete.
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size
75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of
appropriate width with chase cutter and embedding the stone in the chase with epoxy
6.6 8.10
grout or with cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone
aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished
smooth.
8.10.2 Granite Stone of approved shade Sqm 7.00 4,051.85 28,362.95
7.0 9 WOOD WORK
Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board
or graded wood particle board IS : 3087 marked, with one side decorative and other
7.1 9.18 side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves,
ALUMINIUM DOOR SHUTTERS OR ANY OTHER USE with screws and fittings wherever
required, edges to be painted with polyurethane primer (fittings to be paid separately).
9.18.1 18 mm thick sqm 10.00 1,245.75 12,457.50
Providing and fixing Door closer with link arm satin finish with SS screws for wooden
7.2 MR doors of width upto 950mm of approved make and model all complete as per the Each 10.00 1,957.00 19,570.00
directions of Engineer-in-charge
Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less
9.97 than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade
with necessary screws etc. complete :
7.3.1 9.97.2 250x10 mm each 10.00 115.15 1,151.50
7.3.2 9.97.3 200x10 mm each 10.00 99.70 997.00
Providing and fixing 50cm long aluminium kicking plate 100x3.15 mm anodised (anodic
7.4 9.99 coating not less than grade AC 10 as per IS :1868) transparent or dyed to required each 10.00 239.40 2,394.00
colour or shade with necessary screws etc. complete.
Providing and fixing aluminium handles ISI marked anodised (anodic coating not less
9.100 than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with
necessary screws etc. complete :
7.5.1 9.100.1 125 mm each 10.00 66.25 662.50
7.5.2 9.100.2 100 mm each 10.00 59.55 595.50
Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic
7.6 9.101 coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required
colour and shade with necessary screws etc. complete.
9.101.2 Twin rubber stopper each 10.00 72.35 723.50
Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of
7.7 9.113 handles for aluminium door with necessary screws etc. complete ( best make of each 10.00 850.05 8,500.50
approved quality)

Digitally signed by
Pages 2 of 9 CHANDRESH KUMAR
Date: 2025.03.07 19:05:47 IST
Sl No DSR 2023 Description of items Unit Quantity Rate Amount as per DSR Amount as per MR

Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch
7.8 9.139 & Lock on back side of the Panic Latch of reputed brand and manufacture to be each 5.00 8,366.15 41,830.75
approved by the Engineer- in- charge, all complete.

Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of
lead freeu PVC multi-chambered frame, sash and mullion/coupler (where ever
required) extruded profiles having minimumwall thickness of1.70 mm for Series R1 and
R2 profilesand 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any
shape, colour and designduly reinforced with minimum1.50 mm thick galvanized mild
steel section made of required shape & size, uPVC extruded glazing beads, interlocks
and Inline sash adaptor (where everrequired) of appropriate dimension, EPDM gasket,
hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head,
comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as
per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel
screws etc. Profile of frame, sash & mullion (if required)shall be mitred cut and fusion
welded/mechanically jointed duly sealed at all corners, including drilling of holes for
fixing hardware and drainage of water etc. After fixing frame the gap between frame
and adjacent finished wall shall be filled with weather proof silicon sealant over backer
rod of approved size and quality, all complete as per approved drawing conforming to
CPWD specification & direction of Engineer-in Charge.Wire mesh /Glazing of plain/
toughened/ laminated/ double glass unit with / without high performance coatings as
per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid
separately. Note : Structural design proof checked from a Government Engineering
Institute to be provided by the Manufacture for : (i) Sites with basic wind speed
>45m/sec as per IS 875 -Part 3, (ii) Sites with structure height more than 20 m for all
wind speeds
Three track, three panels sliding windo with Aluminium channel for roller track, wool pil,
7.9 9.147.A5
nylon rollers with SS 304 body
using R4 series with frame (115 mm and above) x(45 mm and above) and sash (44 mm
7.9.1 9.147.a5.3 and above)x(55 mm and above) with Zinc alloy (zamak) powder coated handle on two sqm 5.00 9,888.35 49,441.75
end panels along with multi point locking system. ( height above 1.8meter). B
9.147.C2 Fixed window /Ventilator with mullion/transom
Using R1 series with frame (33 mm & above) x (35 mm & above) & mullion (33 mm &
ii) 9.147.C2.1 Sqm 5.00 9,155.20 45,776.00
above) x (50 mm & above). (Height upto 0.90 metre
Using R3 series with frame (55 mm & above) x (45 mm & above) & mullion (55 mm &
iii) 9.147.C2.3 Sqm 5.00 7,827.75 39,138.75
above) x (65 mm & above). (Height upto 2.5 metre
Casement window double panels with fixed mullion with S.S. 304 friction hinges as per
iv) 9.147.E2 size and weight of sash, multi-point locking system, zinc alloy (zamak) powder coated
handles.
Using R2 series with frame (39 mm & above) x (39 mm & above) & sash (39 mm &
9.147.E2.1 above) x (60 mm & above) & mullion (39 mm & above) x (60 mm & above). (Height Sqm 5.00 13,078.70 65,393.50
upto 1.2 metre).
Casement cum fixed panel window having one single casement panel & fixed panel with
9.147.E4 S.S 304 friction hinges as per size and weight of sash, multi-point locking system, zinc
alloy (zamak) powder coated handles.
Using R2 series with frame (39 mm & above) x (39 mm & above) & sash (39 mm &
v) 9.147.E4.1 above) x (60 mm & above) & mullion (39 mm & above) x (60 mm & above). (Height Sqm 5.00 9,870.15 49,350.75
upto 1.2 metre; each openable shutter upto 0.8m width)
Using R3 series with frame (55 mm & above) x (45 mm & above) & sash (55 mm &
vi) 9.147.E4.2 above) x (65 mm & above) & mullion (55 mm & above) x (65 mm & above). (Height Sqm 5.00 9,308.00 46,540.00
upto 1.8 metre: each openable shutter upto 0.8m width)
Casement cum fixed panel window having single casement panel at both ends & middle
9.147.E5 fixed panel with S.S 304 friction hinges as per size and weight of sash, multi-point
locking system, zinc alloy (zamak) powder coated handles.
Using R2 series with frame (39 mm & above) x (39 mm & above) & sash (39 mm &
vii) 9.147.E5.1 above) x (60 mm & above) & mullion (39 mm & above) (60 mm & above). (Height upto Sqm 5.00 10,474.05 52,370.25
1.2 metre; each openable shutter upto 0.8m width)
Casement door double panel with French (false) mullion with Zinc alloy (Zamak) 3D
9.147.F2 hinges , multi point locking system with Cylinder , Zinc alloy (Zamak) powder coated
handles on both side
Using R4 series with frame (64 mm and above )x (55 mm and above) and sash (64 mm
9.147.F2.2 Sqm 5.00 11,818.95 59,094.75
and above) x(100 mm and above)x (60 mm and above) (height above 2.5 meter)
Providing and fixing fire resistant door frame of section 50 x 60 mm on
horizontal side & 35 x 60 mm on vertical sides having built in rebate
made out of 1.6 mm thick GI sheet ( Zinc coating not less than 120gm/
m²) suitable for mounting 120 min Fire Rated Glazed Door Shutters.
The frame shall be filled with Mineral wool Insulation having density min
96Kg/m³ . The frame will have a provision of G.I. Anchor fastners 14 nos
7.10 9.161 ( 5 each on vertical style & 4 on horizontal style of size M10 x 80 ) Meters 5.00 2,202.90 11,014.50
suitable for fixing in the opening along with Factory made Template for
SS Ball Bearing Hinges of Size 100x89x3mm for fixing of fire rated
glazed shutter . The frame shall be finished with a approved fire resistant
primer or Powder coating of not less than 30 micron in desired shade
as per the directions of Engineer - in- charge . (Cost of SS ball bearing
hinges is excluded).
Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 min Fire
Rating confirming to IS:3614 (Part II) or EN1634-1:1999,tested and certified as per
laboratory approved by Engineer-in-charge, with suitable mounting on door frame,
consisting of vertical styles, top rail & side rail 60 mm x 60 mm wide and bottom rail of
7.11 9.162 110 mm x 60mm made out of 1.6mm thick G.I. sheet (zinc coating not less than sqm 5.00 12,017.90 60,089.50
120gm/m²) duly filled mineral wool insulation having density min 96 kg/ m³ and fixing
with necessary stainless steel ball bearing hinges of size 100x89x3mm of approved
make, including applying a coat of approved fire resistant primer or powder coating not
less than 30 micron etc all

Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc.,
with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120
gm/m²) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm
from the edges and 150 mm c/c , including applying a coat of approved fire resistant
primer/ powder coating of not less than 30 micron on G.I. beading, & special ceramic
tape of 5 x 20 mm size etc complete in all respect as per NBC 2016, IS 16231 (Part
3):2016 and as per direction of Engineer-in-charge with glass of required thickness
7.12 9.164 Sqm 5.00 43,677.65 2,18,388.25
having 120 minutes of fire resistance both integrity & radiation control (EW120) and
minimum 20 minutes of insulation (EI20). The manufacturer have to give test
report/certification of fire glass and the glass should have the stamp showing the value
of E, EW & EI. The glass shall be tested in approved NABL accredited lab or by any other
accreditation body which operates in accordance with ISO/IEC 17011 and accredits labs
as per ISO/IEC 17025 for testing and calibration scopes shall be eligible. The maximum
glazing size shall not be more than 1100x2200 mm (w x h) or 2.42 sqm.

8.0 10 STEEL WORK

Structural steel work riveted, bolted or welded in built up sections,trusses and framed
8.1 10.2 work, including cutting, hoisting, fixing in position andapplying a priming coat of KG 10,465.20 133.70 13,99,197.24
approved steel primer all complete

Supplying and fixing rolling shutters of approved make, made of required size M.S.
laths, interlocked together through their entire length and jointed together at the end by
end locks, mounted on specially designed pipe shaft with brackets, side guides and
8.2 10.6 arrangements for inside and outside locking with push and pull operation complete,
including the cost of providing and fixing necessary 27.5 cm long wire springs
manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 -
part 1 and M.S. top cover of required thickness for rolling shutters.
10.6.1 80x1.25 mm M.S. laths with 1.25 mm thick top cover sqm 7.20 3,653.20 26,303.04
8.3 10.7 Providing and fixing ball bearing for rolling shutters. Each 3.00 492.35 1,477.05
Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar
8.4 10.9 instead of laths as per design approved by Engineer-in- charge (area of grill to be sqm 0.72 768.25 553.14
measured).
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses
etc., including cutting, hoisting, fixing in position and applying a priming coat of
8.5 10.16
approved steel primer, including welding and bolted with special shaped washers etc.
complete.
10.16.2 Hot finished seamless type tubes kg 290.00 206.35 59,841.50

Digitally signed by
Pages 3 of 9 CHANDRESH KUMAR
Date: 2025.03.07 19:05:47 IST
Sl No DSR 2023 Description of items Unit Quantity Rate Amount as per DSR Amount as per MR
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in
8.6 10.25 position and applying a priming coat of approved steel primer using structural steel etc.
as required.
10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works kg 1,200.00 172.60 2,07,120.00

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels,
plates etc., including welding, grinding, buffing, polishing and making curvature
(wherever required) and fitting the same with necessary stainless steel nuts and bolts
complete, i/c fixing the railing with necessary accessories & stainless steel dash
8.7 10.28 fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side Kg 470.98 772.40 3,63,787.50
of waist slab with suitable arrangement as per approval of Engineer-incharge, (for
payment purpose only weight of stainless steel members shall be considered excluding
fixing accessories such as nuts, bolts,
fasteners etc.).

Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows
8.8 9.135 and clerestory windows using wire gauge with average width of aperture 1.4
mm in both directions with wire of dia. 0.50 mm all complete.
9.135.2 With 12 mm uPVC or aluminum powder coated U beading ##### 6.00 sqm 7,368.00
9.0 11 FLOORING
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey
9.1 11.26 cement slurry mixed with pigment to match the shade of the slab, including rubbing and
polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
11.26.1 25 mm thick sqm 20.00 1,948.25 38,965.00
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm
(average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey
9.2 11.27 sqm 10.00 2,354.70 23,547.00
cement slurry mixed with pigment to match the shade of the slabs, including rubbing
and polishing complete.
9.3 11.31 Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab. metre 20.00 191.40 3,828.00
Extra for Kota stone/ sand stone in treads of steps and risers using single length up to
9.4 11.32 Sqm 10.00 44.15 441.50
2.00 metre.
Providing and Laying Vitrified tiles in floor in different sizes ( Thickness to be specified by
manufacturer) with water absorption less than 0.08% and conforming to IS :15622 of
approved brand and manufacture, in all colours and shade , laid on 20 mm thick cement
mortar 1:4 ( 1 cement : 4 Coarse sand) jointing with grey cement slurry @3.3 kg /sqm
9.5 11.41.A. 3.1
including grouting the joints with white cement and matching pigments etc. The tiles
must be cut with the Zero chipping Diamond cutter only. Laying of tiles will be done with
the notch Trowel , plier, wedge, clips of required thickness, leveling system and rubber
mallet for placing the tiles gently and easily

Glazed Vitrified tiles Matt/Antiskid finish of Size - Size of tile 600x600 mm sqm 10.00 1,464.85 14,648.50
Providing and fixing Ist quality Ceramic Glazed wall tiles size 600x1200mm conforming
to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all
colours, shades except burgundy, bottle green, black of any size as approved by
9.6 8.31 Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of Sqm 10.00 1,267.95 12,679.50
cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @
3.3kg per sqm, including pointing in white cement mixed with pigment of matching
shade complete.
Grouting the joints of flooring tiles having joints of 3 mm width , using epoxy grout finish
0.70 Kg pf organic coated filler of desired shade (0.10 kg of hardner and 0.20 Kg of
9.7 11.48.2 Sqm 10.00 309.05 3,090.50
resin per kg) , including filling/Grouting and Finishing complete as per direction of
Eingineer in Charge. Size of Tiles - Any size
Providing and laying Polished Granite stone flooring in required design and patterns, in
linear as well as curvilinear portions of the building all complete as per the architectural
drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement
9.8 11.56 mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing
with white cement slurry admixed with pigment of matching shade including rubbing,
curing and polishing etc. all complete as specified and as directed by the Engineer-in-
Charge.
11.56.1 Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent Sqm 10.00 4,481.30 44,813.00
Providing and fiixng 18 mm thick polished granite stone in risers of steps, skirting, dado
Analysed on and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand
9.9 Sqm 10.00 4166.00 41,660.00
DSR ) and jointed with grey cement slurry mixed with pigment to match the shade of the
slab, including rubbing and polishing complete.
Providing and laying Lapato finish Granite stone flooring in required design and patterns,
in linear as well as curvilinear portions of the building all complete as per the
architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of
9.10 MR cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and Sqm 10.00 4282.00 42,820.00
pointing with white cement slurry admixed with pigment of matching shade including
rubbing, curing and polishing etc. all complete as specified and as directed by the
Engineer-in-Charge.
Providing and fiixng 18 mm thick Lapato finish granite stone in risers of steps, skirting,
dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse
9.11 MR Sqm 10.00 4,176.00 41,760.00
sand ) and jointed with white cement slurry mixed with pigment to match the shade of
the slab, including rubbing and polishing complete.
10.0 12 Roofing Work
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone
10.1 12.21 aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1
cement : 3 fine sand) as per standard design :
12.21.1 In 75x75 mm deep chase Meters 100.00 305.15 30,515.00
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete
1:2:4 (1 cement : 2 coarse sand : 4 graded stone agregate of 20 mm nominal size) over
10.2 12.22 P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement Each 7.00 298.25 2,087.75
: 3 coarse sand) and a coat of neat cement, rounding the edges and making and
finishing the outlet complete.
Providing and fixing precoated (Galvalume (PPGL)) Galvanised iron profile sheets
(size,shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm total
coated thickness ( base metal of minimum 0.45 mm thickness with total coating
thickness of 0.05 mm)with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa
steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat
10.3 12.50 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid Sqm 1,200.00 738.65 8,86,380.00
scratches during transportation and should be supplied in single length upto 12 metre or
as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping
screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/
vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and
including cutting to size and shape wherever required.

Providing and fixing precoated galvanised steel sheet roofing accessories of total coated
thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating
10.4 12.51 thickness of 0.05 mm) with Zinc coating 120 gram per sqm as per IS: 277, in 240 mpa
steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat
15-18 microns using self drilling/ self tapping screws complete :
10.4.1 12,51.6 Gutter (600 mm over all girth) metre 120.00 1,313.70 1,57,644.00
10.4.2 12.51.2 Flashings/ Aprons.( Upto 600 mm) metre 112.00 485.60 54,387.20
10.4.3 12.51.3 North light curves metre metre 297.00 546.10 1,62,191.70
10.4.4 12.51.4 Barge board (Upto 300 mm) metre 122.00 451.50 55,083.00
10.4.5 12.51.5 Crimp curve sqm metre 297.00 496.75 1,47,534.75
11.0 13 FINISHING
Providing and applying 12 mm thick (average) premixed formulated one coat gypsum
lightweight plaster having additives and light weight aggregates as vermiculite/ perlite
11.1 13.78 respectively conforming to IS: 2547 (Part - 1 & II) 1976, applied on hacked / uneven sqm 100.00 468.90 46,890.00
background such as bare brick/ block/ RCC work on walls & ceiling at all floors and
locations, finished in smooth line and level etc. complete.
18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1
11.2 13.11 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 Sqm 10.00 518.55 5,185.50
cement : 6 fine sand).
Wall painting with acrylic emulsion paint, having VOC (Volatile Organic
Compound ) content less than 50 grams/ litre, of approved brand and
11.3 13.82
manufacture, including applying additional coats wherever required, to
achieve even shade and colour.
13.82,2 Two coats Sqm 10.00 137.45 1,374.50
Finishing with Deluxe Multi surface paint system for interiors and exteriors
11.4 13.48
using Primer as per manufacturers specifications :

Digitally signed by
Pages 4 of 9 CHANDRESH KUMAR
Date: 2025.03.07 19:05:47 IST
Sl No DSR 2023 Description of items Unit Quantity Rate Amount as per DSR Amount as per MR
Two or more coats applied on walls @ 1.25 ltr/10 sqm over
13.48.1 and including one coat of Special primer applied @ 0.75 ltr Sqm 10.00 193.70 1,937.00
/10 sqm
Providing and applying white cement based putty of average thickness 1 mm, of
11.5 13.80 approved brand and manufacturer, over the plastered wall surface to prepare the Sqm 10.00 156.05 1,560.50
surface even and smooth complete.
11.6 13..114 Melamine polishing on wood work (one or more coat). Sqm 10.00 1,192.30 11,923.00
Providing and laying tactile tile (for vision impaired persons as per standards) of size
300x300x9.8 mm having with water absorption less than 0.5% and conforming to
IS:15622 of approved make in all colours and shades in for outdoor floors such as
11.7 16.90 footpath, court yard, multi modals location etc., laid on 20 mm thick base of cement Sqm 10.00 2,017.60 20,176.00
mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the
joints with white cement mixed with matching pigments etc. complete as per direction of
Engineer-in-Charge.
12.0 21 ALUMINIUM WORKS

Providing and fixing aluminium work for doors, windows, ventilators and partitions with
extruded built up standard tubular sections/ appropriate Z sections and other sections of
approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws
or with fixing clips, or with expansion hold fasteners including necessary filling up of
12.1 21.1 gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc.
Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically
wherever required including cleat angle, Aluminium snap beading for glazing / paneling,
C.P. brass / stainless steel screws, all complete as per architectural drawings and the
directions of Engineer-in-charge. (Glazing and paneling to be paid for separately) :

i) 21.1.1 For fixed portion

21.1.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) kg 5.00 530.90 2,654.50
Polyster Powder coated aluminium (minimum thickness of polyster powder coating 50
12.2 21.1.1.3 kg 5.00 539.85 2,699.25
micron)
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots
12.3 21.1.2 and making provision for fixing of fittings wherever required including the cost of EPDM
rubber / neoprene gasket required (Fittings shall be paid for separately)
Polyster Powder coated aluminium (minimum thickness of polyster powder coating 50
21.1.2.3 kg 5.00 643.45 3,217.25
micron)
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or
graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in
12.4 21.2
aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel
screws etc. complete as per architectural drawings and directions of engineer-in-charge.
21.2.2 Pre-laminated particle board with decorative lamination on both sides Sqm 5.00 1,115.40 5,577.00
Providing and fixing glazing in aluminium door, window, ventilator shutters and
partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural
12.5 21.3
drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading
shall be paid in basic item) :
21.3.2 With float glass panes of 5.50 mm thickness sqm 5.00 1,505.25 7,526.25
Providing and fixing 6mm thick toughened glass in Doors, windows and Ventilators
12.6 MR including sealing with EPDM / Neoprene gasket all complete as per the architectural Sqm 5.00 2,931.00 14,655.00
drawings and the directions of engineer-in-charge
Providing and fixing 8mm thick toughened glass in Doors, windows and Ventilators
12.7 MR including sealing with EPDM / Neoprene gasket all complete as per the architectural Sqm 5.00 4,546.00 22,730.00
drawings and the directions of engineer-in-charge
Providing and fixing Louver with 6mm thick frosted glass in windows and Ventilators
12.8 MR including sealing with EPDM / Neoprene gasket all complete as per the architectural Sqm 5.00 2,931.00 14,655.00
drawings and the directions of engineer-in-charge
Providing and fixing pre sealed Double glass panes 8mm glass +25 mm argon filled+8
12.9 MR mm glass ( Insulated Glass units ) as per ASTM E2190-19 Sqm 5.00 13,080.00 65,400.00
Standard Specification for Insulating Glass Unit Performance and Evaluation
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by
12.10 21.8 providing weather silicon sealant over backer rod of approved quality as per
architectural drawings and direction of Engineer-in-charge complete.
21.8.1 Upto 5mm depth and 5 mm width metre 5.00 96.75 483.75
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved
brand and manufacture, including providing and fixing top & bottom pivot & double
12.11 21.18 acting hydraulic floor spring type fixing arrangement and making necessary holes etc. Sqm 5.00 5,325.90 26,629.50
for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door
handle, lock and stopper etc.to be paid separately).

Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick &
12.12 21.12
2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge.
21.12.2 Powder coated minimum thickness 50 micron aluminium tubular handle bar Each 5.00 631.55 3,157.75
Providing and fixing aluminium casement windows fastener of required length for
12.13 21.15
aluminium windows with necessary screws etc. complete.
21.15.2 Powder coated minimum thickness 50 micron aluminium Each 5.00 97.95 489.75
Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws
12.14 21.16
etc. complete as per direction of Engineer-in charge
21.16.2 Powder coated minimum thickness 50 micron aluminium Each 5.00 109.30 546.50
13.0 22 WATER PROOFING

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc.,
by applying cement slurry mixed with water proofing cement compound consisting of
applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing
cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b)
13.1 22.5 Sqm 150.00 617.05 92,557.50
Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement
compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed
with water curing for 48 hours. The rate includes preparation of surface, treatment and
sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry

Providing and laying integral cement based water proofing treatment including
preparation of surface as required for treatment of roofs, balconies, terraces etc
consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75
kg/sqm of cement admixed with water proofing compound conforming to
IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining
walls upto 300 mm height including cleaning the surface before treatment. (b) Laying
brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50%
of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing
compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm
thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water
13.2 22.7 proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to
required slope and treating similarly the adjoining walls upto 300 mm height including
rounding of junctions of walls and slabs. (c) After two days of proper curing applying a
second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing
compound conforming to IS : 2645 and approved by Engineerin- charge. (d) Finishing
the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse
sand) admixed with water proofing compound conforming to IS : 2645 and approved by
Engineerin- charge including laying glass fibre cloth of approved quality in top layer of
plaster and finally finishing the surface with trowel with neat cement slurry and making
pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be
flooded with water for a minimum period of two weeks for curing and for final test. All
above operations
With average to be done
thickness inmm
of 120 order
andand as directed and specified by the Engineer-in-
minimum
22.7.1 Sqm 100.00 1,684.60 1,68,460.00
thickness at khurra as 65 mm.

PLUMBING WORK
DSR 2023
PLUMBING WORK - DSR ITEM
Ref.
Excavating trenches of required width for pipe, cables etc including excavation for
sockets ,& dressing of sides ,ramming of bottoms ,for all depth including getting out
1 2.10 the excavated soil,& then returning the soil as required, in layers not exceeding 20 cm
in depth including consolidating each deposited layer by ramming ,watering, etc and
disposing of surplus excavated soil as directed, within lead of 50m.
2.10.1.2 pipes cables etc. exceeding 80 mm dia. But not exceeding 300 mm dia meter 213.00 352.15 75,007.95

Providing and laying in position cement concrete of specified grade excluding the cost of
2 4.1.8
centering and shuttering - All work up to plinth level :

1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). cu.mt. 32.00 6,812.00 2,17,984.00

Digitally signed by
Pages 5 of 9 CHANDRESH KUMAR
Date: 2025.03.07 19:05:47 IST
Sl No DSR 2023 Description of items Unit Quantity Rate Amount as per DSR Amount as per MR
Providing and placing on terrace (at all floor levels) polyethylene water storage tank,
IS:12701 marked, with cover and suitable locking arrangement and making necessary
3 18.48 Liters 15,000.00 11.00 1,65,000.00
holes for inlet, outlet and overflow pipes but without fittings and the base support for
tank. Circular tank
Providing and fixing square-mouth S.W. gully trap class SP1 complete with C.I.
grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm
4 19.4.2.2 size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less nos 3.00 2,711.00 8,133.00
than 2.70 kg as per standard design : 150 x 100 mm size P type. With sewer bricks
conforming
Constructingtobrick
IS : masonry
4885 manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand )
with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III): 3 graded
stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement:
4coarse sand (zone-III): 8graded stone aggregate 40mm nominal size), inside
5 19.7.1
plastering 12mm thick with cement mortar 1:3 (1ement: 3coarse sand) finished with
floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement
:2 coarse sand :4 Graded stone aggregate nominal size ) finished with a floating coat of
neat cement complete as per standard design
inside size 90x80 cm and 45 cm deep including C.I. cover with frame (Light duty)
19.7.1 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38
KG ( weight of Cover 23 kg and weight of frame 15 Kg):
19.7.1.1 With common burnt clay F.P.S. ( non modular ) bricks of class designation 7.5 nos 4.00 12,770.55 51,082.20
6 19.8 Extra for depth of Manholes
19.8.1 Size 90x80 cm
7 19.8.1.1 With common burnt clay F.P.S. ( non modular ) bricks of class designation 7.5 meter 2.00 8,825.40 17,650.80
Constructing brick masonry road gully chamber 50x45x60 cm with bricks in
cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast
R.C.C. horizontal grating with frame complete as per standard design : bricks in
8 19.27 cement mortar 1:4 (1 cement : 4 coarse sand ) with precast R.C.C. nos 18.00 5,957.90 1,07,242.20
vertical grating complete as per standard design : 19.28.1 With common
burnt clay F.P.S. (non modular) bricks of class designation 7.5 With common
burnt clay F.P.S. (non modular) bricks of class designation 7.5
P/L NP2 class R.C.C. pipes with collars jointed with
19.6
stiff mixture of cement mortar in the proportion of (1:2):
9 19.6.3 250 mm dia RCC pipe meter 46.00 899.80 41,390.80
10 19.6.4 300 mm dia RCC Pipe meter 100.00 994.30 99,430.00

Sl No Description of items Unit Quantity Rate

Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC
pipes for rain water, Type-B as per IS13592 : suitable for rubber ring joints,
including all neccessary specials and fittings (confirming to IS:) i.e. bends, tees,
junctions (with or without doors), reducers, couplers, cowls, clamps, rubber rings, clean
outs etc. fixing at wall/ ceiling/ floor level supported by clamp & hangers etc. in
1 MR-1
concealed / inside duct / under floor & basement ceiling / external work etc. including
chase cutting,cutting of RCC slab as required, excavation and back filling in all kind of
soils, suspended from floor under false ceiling including cost of shuttering for proper
completion of the work, breaking and making good the walls and floors etc. after pipes
have been duly laid and tested.

The Pipes will be supported with threaded G I rods & clamps on 50x50x5 mm slotted
angle. The cost will include all support arrangements. The work includes commissioning
of all pipes lines as per drawings and specifications and as directed by engg-in-charge at
site.
150 mm outer dia Rm 100.00 1,001.00 1,00,100.00
Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC
pipes for soil, waste and vent, Type-B as per IS13592 : suitable for rubber ring
joints, including all neccessary specials and fittings (confirming to IS:) i.e. bends, tees,
junctions (with or without doors), reducers, couplers, cowls, clamps, rubber rings, clean
outs etc. fixing at wall/ ceiling/ floor level supported by clamp & hangers etc. in
2 MR-2
concealed / inside duct / under floor & basement ceiling / external work etc. including
chase cutting,cutting of RCC slab as required, excavation and back filling in all kind of
soils, suspended from floor under false ceiling including cost of shuttering for proper
completion of the work, breaking and making good the walls and floors etc. after pipes
have been duly laid and tested.
The Pipes will be supported with threaded G I rods & clamps on 50x50x5 mm slotted
angle. The cost will include all support arrangements. The work includes commissioning
of all pipes lines as per drawings and specifications and as directed by engg-in-charge at
site.
110 mm outer dia Rm 250.00 1,098.00 2,74,500.00
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal
stability for hot & cold water supply including all CPVC plain & brass
threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing
based on
3 of pipes & fittings including unions and reducers with one step CPVC solvent cement and
18.8
the cost of cutting chases and making good the same including testing of joints
complete as per direction of Engineer in Charge . concealed work including
cutting chases and making good the walls etc.,
3.1 18.8.2 20 mm nominal outer dia .Pipes. meter 512.00 537.60 2,75,251.20
3.2 18.8.3 25 mm nominal outer dia .Pipes. meter 74.00 627.25 46,416.50
3.3 18.8.4 32 mm nominal outer dia .Pipes. meter 78.00 739.30 57,665.40
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having
thermal stability for hot & cold water supply including all CPVC plain &
brass threaded fittings This includes jointing of pipes & fittings with one
step CPVC solvent cement, trenching, refilling & testing of joints complete
as per direction of Engineer in Charge
4 18.9.6 50 mm nominal outer dia .Pipes.-From tank to shaft meter 80.00 794.25 63,540.00
Providing and fixing ball valve (brass) of approved quality, High or low pressure,
5 Nos 5.00 897.00 4,485.00
with plastic floats complete :15 mm nominal bore
P/F CPVC ball valve (gate valve) of approved make in CPVC pipes i/c cutting, chasing of,
MR
making it good and making all complete as per the directions of Engineer- in-charge.

6.1 MR 50 mm nominal bore Nos 5.00 1,387.00 6,935.00

6.2 MR 32 mm nominal bore Nos 6.00 618.00 3,708.00
6.3 MR 25 mm nominal bore Nos 6.00 380.00 2,280.00
6.4 MR 20 mm nominal bore Nos 10.00 296.00 2,960.00
6.5 MR 15 mm nominal bore Nos 10.00 897.00 8,970.00
Providing & Fixing Soap Dispenser with glass bottel as per direction of Engineer-in-
7 MR No. 20.00 2,151.00 43,020.00
Charge.
Providing and fixing CP grating of approved quality as per direction of Engineer-in-
8 MR No. 50.00 534.00 26,700.00
Charge.Circular type.100 mm nominal dia.
Providing and fixing Wash basin, Type:Table Top ,Colour:White Shape:Rectangle
9 MR Dimensions:700 x 435 x 135 mm Item includes all accessories, piping, white Each 30.00 8,707.00 2,61,210.00
cement, sundries , brackets etc. Complete
Providing & fixing Wall-hung European type water closet with provision also of all
10 MR Each 30.00 9,658.00 2,89,740.00
accessories required for installation and testing Color: White, Type: Wall Hung
Providing & fixing Concealed Cistern with Chrome Plate Standards/Grohe. Item include
11 MR Each 30.00 8,560.00 2,56,800.00
all accessories plates etc.
Providing and fixing with all sundries health faucet ( hand shower
) Description :Hand Shower (Health Faucet) with 8mm Dia 1.2 Meter Long Flexible
12 MR nos 30.00 1,962.00 58,860.00
Tube and Wall Hook.. Item includes all accessories, all type of piping,white cement,
sundries
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C.
13 MR waste fittings complete. Flexible pipe 32 mm dia Item includes all accessories, all nos 30.00 170.00 5,100.00
type of piping,white cement, sundries
14 MR-14 Providing and fixing 5.5 mm thk. Float glass Mirror mounted on S.S Stud Sq.M. 20.00 1,678.00 33,560.00
Providing and fixing Soap Dish Holder of size 120mm Square shape
15 MR Brass Chrome Plated, Soap Dish Holder. Item includes all accessories, all type of nos 10.00 1,266.00 12,660.00
piping,white cement, sundries
Providing and fixing C.P. brass Bib Cock
16 MR Description :Bib Cock with Wall Flange. Item includes all accessories, all type of nos 30.00 2,166.00 64,980.00
piping,white cement, sundries

Digitally signed by
Pages 6 of 9 CHANDRESH KUMAR
Date: 2025.03.07 19:05:47 IST
Sl No DSR 2023 Description of items Unit Quantity Rate Amount as per DSR Amount as per MR

Providing and fixing C.P. Long Body Bib Cock with Wall Flange, Item includes all
17 MR nos 30.00 1,870.00 56,100.00
accessories, all type of piping,white cement, sundries

Providing and fixing CP Grating Square Grating, Size: 5"X5" SS304, Shape- Square,
Material -Stainless Steel, Size 5" x 5"/6" x 6" 125 mm nominal dia with 25 mm waste
18 MR nos 30.00 4,591.00 1,37,730.00
hole/without hole. Item includes all accessories, all type of piping,white cement,
sundries
Providing and fixing chrome double Coat hook Item includes all accessories, all type
19 MR nos 30.00 733.00 21,990.00
of piping,white cement, sundries
Providing and fixing Chrome Towel Ring Square shape of size 210mm. Item includes
20 MR nos 15.00 1,550.00 23,250.00
all accessories, all type of piping,white cement, sundries
Providing and fixing Sink pillar taps with swivel output as per direction of engineer
21 MR nos 2.00 3,861.00 7,722.00
incharge Item includes all accessories, all type of piping,white cement, sundries
Providing and fixing Angular Stop Cock with Wall Flange, Item includes all
22 MR nos 27.00 1,311.00 35,397.00
accessories, all type of piping,white cement, sundries
Providing and fixing SS Floor trap of size 150mm . Item includes all accessories, all
23 MR nos 30.00 4,602.00 1,38,060.00
type of piping,white cement, sundries
Providing and fixing Push Tap for Urinal Valve with Auto Closing system with
24 MR 65 mm Extension Body. Item includes all accessories, all type of piping,white nos 16.00 3,183.00 50,928.00
cement, sundries

Providing and fixing white viterous china large flat back / half stall urinal of size
25 730mmx480mmx310mm). Item includes all accessories, all type of piping,white
cement, sundries and approval as per engineer incharge

MR Floor drain Fixture included in PVC piping nos 16.00 15,315.00 2,45,040.00
Providing and fixing Overhead Shower 180mm Round Shape Single Flow (ABS Body
Chrome Plated with Gray Face Plate) with Rubit Cleaning System alongwith shower arm
26 MR 4.00 3,383.00 13,532.00
and flange etc. Item includes all accessories, all type of piping,white cement,
sundries and approval as per engineer incharge
Providing and fixing Regular Body Concealed stop cock 20mm Suitable For 20 mm Pipe
27 MR Line with Protection Cap. Item includes all accessories, all type of piping,white 42.00 2,198.00 92,316.00
cement, sundries and approval as per engineer incharge.

Providing and fixing soil, waste and vent VERTICAL pipes in uPVC SWR pipings,
working pressure 6.0 kg/ sq.cm. including all fittings , jointing (all types of traps, floor
drains, bends, coupling, offsets, tees all of them with or without doors) . Length shall be
MR
measured from GT , Manhole to Cowl or Horizontal termination point without any extra
allowance for fittings. . Item includes all types of chasing , core cutting, all
accessories, all type of piping,white cement, sundries
29.1 MR 110 mm Outer dia meter 96.00 744.00 71,424.00
29.2 MR 160 mm Outer dia meter 50.00 1,238.00 61,900.00
Providing and fixing soil, waste and vent HORIZONTAL SLUNG pipes in uPVC SWR
pipings , working pressure 6.0 kg / sq.cm including all fittings, jointing (all types of
traps, floor drains,bends, coupling, offsets, tees all of them with or without doors) . The
MR rates are inclusive of required Core cuttings in RCC members, chasing of all types, water
proofing with 1:3 Cement sand Mortar with water proofing Compund as / manufacturer's
specifications of all thickness and dia. Length shall be measured from Start to End in a
single horizontal line without any extra allowance for fittings.
30 MR 110 mm Outer dia meter 200.00 744.00 1,48,800.00
Total of Civil Works 7,36,44,047.60 29,77,345.00

ELECTRICAL COMBINED ESTIMATE based on DSR-2022/NSI

SH :03 - ELECTRICAL
DSR-
S.No. Description Unit QTY Rate
2022/NSI

1 Main Panel (All Block)

2 INCOMER
1 No. 300A 4P MCCB ,36 kA breaking capacity with thermal release and adjustable
3 setting and with rotary handle.with ON/OFF/TRIP indication Lamps, MFM with
Communication Facility along with control SP MCB
4 METERING & INDICATION
5 1 set of R,Y,B phase indicating lamps
1 set of ON/OFF/TRIP indication Lamps, MFM with Communication Facility along with
6
control SP MCB
7 BUS-BAR
8 1 Set of 450A TPN Aluminium Bus Bar with colour coded PVC Sleeves
9 OUTGOINGS
1 Nos.200A FP MCCB, 25 kA breaking capacity with thermal release and adjustable
10
setting and with rotary handle
3 Nos.160A FP MCCB, 25 kA breaking capacity with thermal release and adjustable
11
setting and with rotary handle
6 Nos.63A FP MCCB, 25 kA breaking capacity with thermal release and adjustable
12
setting and with rotary handle
NOTE :- All starters shall have ON & OFF push button & suitable rating of
13
contractor and overload relays
14 MR Supplying,Receiving, fixing, testing & commissioning of above described Panel Set. 1.00 4,65,398.00 4,65,398.00
15 SWITCH CONTROL LIGHT POINTS
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS
PVC insulated copper conductor single core cable in surface / recessed medium class
16
PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point
with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
17 1.10.3 Group C Point 150.00 1,467.00 2,20,050.00
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell
point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper
18 1.55.1 conductor single core cable in surface/ recessed PVC conduit, and earthing the point Point 39.00 649.00 25,311.00
with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as
required.:Group A
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor
single core cable in surface / recessed PVC conduit, 2 way modular switch, modular
19 1.9 Point 6.00 1,457.00 8,742.00
plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper
conductor single core cable etc as required.
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC
insulated copper conductor single core cable in surface/
20 1.12 Mtr. 500.00 334.00 1,67,000.00
recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated
copper conductor single core cable for loop earthing as required.
Wiring for light/ power plug with 4X4 sq. mm FRLS PVC
insulated copper conductor single core cable in surface/
21 1.13 recessed medium class PVC conduit alongwith 2 Nos. 4 sq. mm Mtr. 150.00 537.00 80,550.00
FRLS PVC insulated copper conductor single core cable for loop
earthing as required.
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS
22 1.14 PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as -
required
23 1.14.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire Mtrs. 750.00 233.00 1,74,750.00
24 1.14.10 4x 10 sqmm+ 2x 6 sqmm earth wire Mtrs. 100.00 1,005.00 1,00,500.00
Supply & fixing of following sizes of medium class PVC conduit along with accessories in
25 1.21 surface / recessed including cutting the wall & making good the same in case of -
recessed conduit as required.
26 1.21.2 25 mm dia. Mtrs. 150.00 145.00 21,750.00
27 1.21.3 32 mm dia. Mtrs. 150.00 184.00 27,600.00
Supplying and fixing suitable size GI box with modular plate and cover in front on
28 1.32 surface or in recess including providing and fixing 6 pin 5/6 & 15/16 Amp modular Each 76.00 586.00 44,536.00
socket outlet and 15/16 A modular switch, connection etc. as required.

Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp,
of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top
10.18- Civil
29 surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. Each 123.00 220.65 27,139.95
DSR 2023
sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp
shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.

Digitally signed by
Pages 7 of 9 CHANDRESH KUMAR
Date: 2025.03.07 19:05:47 IST
Sl No DSR 2023 Description of items Unit Quantity Rate Amount as per DSR Amount as per MR
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V,
TPN MCB distribution board of sheet steel, dust protected, duly powder painted,
30 2.5 inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for
mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB
TPDB is normally used where 3 phase outlets are required.)
31 2.5.1 4 way (4+12),Double door Each 3.00 7,512.00 22,536.00
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel,
MCB distribution board, 415 V, onsurface/ recess, complete with tinned copper bus bar,
32 2.4 -
neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing
etc. as required. (But without MCB/RCCB/Isolator)
33 2.4.3 8 way (4+24),Double door Each 8.00 5,967.00 47,736.00
Supplying & fixing 6 amps to 32 amps rating 240/415 volts C curve Miniature Circuit
34 2.1 Breaker suitable for inductive load of following poles in the existing MCB DB complete -
with connections, testing and commissioning etc. as required.
35 2.10.1 Single Pole Each 100.00 256.00 25,600.00
Supply & fixing of single pole blanking plate in the existing MCB DB complete etc. as
36 2.11 Each 25.00 13.00 325.00
required
Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB
37 MR
DB complete with connections, testing and commissioning etc. as required.
38 25 amps Each 8.00 1,770.00 14,160.00
39 40 amps
Supplying and fixing of following rating four pole 415 V MCCB in the existing MCCB DB
40 MR
complete with connections ,testing and commissioning etc as required.
41 MR 63 amps Each 5.00 1,848.00 9,240.00
42 MR 100 amps Each 2.00 4,588.00 9,176.00
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories,
43 5.4 and providing masonry enclosure with cover plate having locking arrangement and Each 2.00 7,472.00 14,944.00
watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
Providing and fixing 25 mm x 5 mm G.I. strip in 40 mm dia G.I.
44 5.11 RMT 38.00 706.00 26,828.00
pipe from earth electrode, as required.
Providing and fixing 25 mm x 5 mm G.I. strip on surface or in
45 5.15 RMT 50.00 244.00 12,200.00
recess for connections etc. as required.
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as
46 5.16 RMT 50.00 70.00 3,500.00
requied.
Supply, Installation, Testing and Commissioning of 10 W LED Bulk head Light -
Supply of 10W LED bulkhead Surface mounted IP65 bulkhead LED fixture made up of
pressure die cast aluminum housing with integrated power supply unit, LED Used shall
be SMD type and fixture should have minimum efficacy at System level (Not Chip Level)
47 MR Nos. 6.00 898.00 5,388.00
≥90 lumens/watt with Minimum system Lumens 900, Life of LED : 50000 burning Hrs.
@ L70B50 Lumen maintenance, cool white color temperature (SDCM<5), CRI >80, PF
>0.95 & THD<10%, an operating Voltage Range of 150 - 260 VAC.Minimum Internal
Surge Protection 2.5KV.

Supply, Installation, Testing and Commissioning of 12W Surface Mounted LED

circular Downlighter - Supply of Surface Mounted LED Downlight with cylindrical
construction, Housing Dia 160 mm, height 110 mm, Luminaire luminous flux 1320 Lm,
Maximum system Power 12W, Luminous efficiency of 110 Lm/W. CRI >80. Life of fixture
48 MR 50000 hrs@ L70 Lumen maintenance, CCT 5700K, CRI >80, PF >0.95, and suitable for Nos. 30.00 1,363.00 40,890.00
230V AC, 50Hz. supply, Internal Surge Protection ≥ 2.5KV. The fixture should comply
with the parameters as per IS10322 and IEC60598, EMC / EMI compliance, and LED
driver shall be SELV & BIS registered & luminair manufacture shall provide LM79report
from NABL accredited lab & LM80 report issued by LED manufacturer .
Supply, installing, testing & commissioning of Decorative Wall Light with 2 LT Ivory
Fabric shade with 3W LED mild steel & Brass with Chrome finish, Fixture Height 405mm,
49 MR Size (LXWXH) 155 X 280 X 405 mm and E14 base 7w Bulb or Eqivalent as per direction Nos. 15.00 4,195.00 62,925.00
of E/I.

Supply installing, testing & commissioning of LED 4ft Batten with a nominal system
lumen output of 4000 lumens and a minimum system efficacy of 110 lm/W. The
luminaire shall have a rated system lifetime of 25,000 burning hours at L70B50. The
50 MR luminaire should have a color temperature of 6500K/4000K and CRI>80. The luminaire Nos. 200.00 170.00 34,000.00
shall meet IP20 rating with THD < 10% and PF > 0.95. It should have a surge
protection of 2.5kV. The luminaire housing should made of Polycarbonate housing with a
diffuser.
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated,
ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos.
blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding,
Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery
51 19.1 minimum 215 CMM, 350 RPM (tolerance as per IS: 374-2019), THD less than 10%, Nos. 50.00 2,730.00 1,36,500.00
remote or electronic regulator unit for speed control and all remaining accessories
including safety pin, nut bolts, washers, temperature rise=75 degree C (max.),
insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC
Supply, earthing etc. complete as required.
Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I.
52 6.2 tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including Each 2.00 518.00 1,036.00
holes etc. complete as required.
Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other
53 6.4 Each 75.00 113.00 8,475.00
metallic object) by riveting / nut bolting/ sweating and soldering etc as required.
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for
54 6.7 Metre 80.00 126.00 10,080.00
lightning conductor complete as required.(For horizontal run)
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for
55 6.8 Metre 100.00 197.00 19,700.00
lightning conductor complete as required.(For vertical run)
Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long,
56 6.12 Each 2.00 121.00 242.00
with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.
Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground as
57 6.14 Metre 60.00 195.00 11,700.00
required.
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed
58 1.53.1 Steel/ PVC conduit as required- 1 run of cable- (for Connectivity of Hub room to End Mtr 300.00 57.00 17,100.00
Point)
Supply, Installation, Testing and Commissiong of CAT6 information outlet (I/O) for
59 MR Nos. 13.00 501.00 6,513.00
camera at user end.
Supply, Installation, Testing and Commissiong of loaded 24 port CAT6 jack panel for
60 MR Nos. 1.00 5,683.00 5,683.00
CAT6 cable termination at rack end.
Supply, Installation, Testing and Commissiong of CAT6 patch cord 7 feet for information
61 MR Nos. 1.00 276.00 276.00
outlet (I/O) to end user device connectivity.
Supply, Installation, Testing and Commissiong of 1, 2 and 4 port face plate white for I/O
62 MR Nos. 15.00 496.00 7,440.00
fixing at user side.
Supply, Installation, Testing & Commissioning of 3 MP Bullet camera , ONVIF profile S
,G & T . UL , CE , FCC Certified ,1/2.8” Progressive Scan CMOS ,2.7 mm to 12 mm
motorized varifocal lens , Quad stream with each stream support H.265+ compression
simultaneously ,min illumination : 0.01 Lux @ (F1.2,AGC ON), 0 Lux with IR , Shutter
63 MR speed : 1 / 5s ~ 1 / 100,000 s ,120 dB WDR , Compression : H.265+ ,H.265 ,H.264+ Nos. 5.00 12,815.00 64,075.00
H.264 .SD card support , Alarm trigger - 1 input / 1 output , frame rate : Main stream
should support 25 fps@5MP , Edge analytics : line crossing , perimeter intrusion ,Face
detection (deep learning) , pedestrian detection ,cross counting , stationary object , In
built IR LED , IR Distance upto 50 meters , IP 67 , IK 10 housing , POE

Supply, Installation, Testing & Commissioning of 32 channel NVR , ONVIF compliant ,

recording bandwidth 640 Mbps , output interface 1 HDMI (up to 4K), 1 VGA , Alarm
in/out :16ch in / 4ch out , 1 X RJ45 Ethernet , iOS smartphone support , 8 HDD
64 MR support , each HDD slot support upto 8 TB HDD , RAID support , 1x3.0 USB for backup Nos. 1.00 94,718.00 94,718.00
/upgrade , 2x 2.0 USB for mouse , Artificial Intelligence Support having face recognition
with compatible deep learning supported cameras, AI-Face registered quantity upto
10,000 ,A.I maximum captured quantity 200,000. UL,CE,FCC certified

65 MR Supply, Installation, Testing and Commissiong of 6TB Surviellance Hard Disk. Nos. 1.00 16,781.00 16,781.00

Supply, Installation, Testing and Commissiong of Full HD 42" LED Professional Display
66 MR Nos. 1.00 28,186.00 28,186.00
Panel.

Digitally signed by
Pages 8 of 9 CHANDRESH KUMAR
Date: 2025.03.07 19:05:47 IST
Sl No DSR 2023 Description of items Unit Quantity Rate Amount as per DSR Amount as per MR
Supply, Installation, Testing & Commissioning of of Access Switch 24 Port POE+ Access
Switches with switching capacity of 56 Gbps, forwarding performance 10 Mpps, having
67 MR Nos. 1.00 53,488.00 53,488.00
8 x 10/100/1000BASE-T PoE-plus(RJ45) with minimum PoE budget of 370W and 2x 1G
SFP+ uplink ports
Supplying and fixing of following sizes of medium class PVC conduit along with
68 1.21 accessories in surface/recess including cutting the wall and making good the same in -
case of recessed conduit as required.
69 1.21.2 25 mm dia. Mtr 175.00 145.00 25,375.00
Supply, Installation, Testing and Commissiong of intelligent analog addressable
70 17.2.4
photothermal detector complete with mounting base complete as required.
71 17.2.4 Below False Ceiling Nos. 100.00 2,858.00 2,85,800.00
72 MANUAL CALL POINT
Supplying, installation, testing & commissioning of addressable manual call point
73 17.2.14 Nos. 6.00 3,871.00 23,226.00
complete as required.
74 Hooter cum strobe
Supplying, installation, testing & commissioning of addressable horn cum strobe
75 17.2.15 Nos. 6.00 3,506.00 21,036.00
complete as required.
76 FIRE ALARM CONTROL PANEL

Supplying, installation, testing & commissioning of micro processor based intelligent

addressable main fire alarm panel, central processing unit with the following loop
modules and capable of supporting not less than 240 devices (including detectors) and
minimum 120 detectors per loop and loop length up to 2 km, network communication
card, minimum 320 character graphics/ LCD display with touch screen or other keypad
and minimum 4000 events history log in the non volatile memory (EPROM), power
77 17.2.1
supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free
batteries with automatic charger. The panel shall have facility to connect printer to
printout log and facility to have seamless integration with analog/digital voice evacuation
system (which is part of the schedule of work under SH: PA System) and shall be
complete with all accessories . The panel shall be compatible for IBMS system with open
protocol BACnet/ Modbus over IP complete as per specifications.

78 17.2.1.2 Two Loop Panel. Nos. 1.00 2,39,225.00 2,39,225.00

Supplying, installation, testing & commissioning of repeater panel wih 320 character/
79 17.2.3 Touch screen LCD display with inbuilt reset, acknowledge and silence switches complete Nos. 1.00 1,08,688.00 1,08,688.00
as required.
Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with
annealed copper conductor having glass mica fire barrier tape covered by an extruded
80 17.5.1 RM 500.00 359.00 1,79,500.00
layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner
bedding, steel wire armouring & LSZH outer sheath complete as required.
81 SPEAKERS
82 17.3.3 Supply of 1.5/3/6W metal box ceiling/wall speakers complete as required. Nos. 10.00 1,793.00 17,930.00
83 DIGITAL AMPLIFIERS
Supply of 1X500W Class-D Amplifier with 2 independent channels and can provide
automatic re-settable overcurrent, overload, overheating, overvoltage, under-voltage
84 MR
and DC protection

85 250 Watts Nos. 1.00 43,459.00 43,459.00

Supply of cable Fire Retardant PVC insulated copper conductor cable in the existing
86 17.5.3 surface / recessed steel conduit of following pairs, cores and size including connections
and interconnections etc. as required.
87 17.5.3.2 Speaker cable Two pair, 2-core, 1.5 sqmm RM 250.00 89.00 22,250.00
88 SWITCH CONTROL LIGHT POINTS
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS
PVC insulated copper conductor single core cable in surface / recessed medium class
89 1.1 PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point
with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as
required.(For Concealed Wiring)
90 1.10.1 Group A Point 40.00 1,015.00 40,600.00
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor
single core cable in surface / recessed PVC conduit, 2 way modular switch, modular
91 1.9 Point 10.00 1,457.00 14,570.00
plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper
conductor single core cable etc as required.
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC
insulated copper conductor single core cable in surface/
92 1.12 Mtr. 10.00 334.00 3,340.00
recessed medium class PVC conduit alongwith 1 No. 4 sq. mm
FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for light/ power plug with 4X4 sq. mm FRLS PVC
insulated copper conductor single core cable in surface/
93 1.13 Mtr. 10.00 537.00 5,370.00
recessed medium class PVC conduit alongwith 2 Nos. 4 sq. mm
FRLS PVC insulated copper conductor single core cable for loop earthing as required.
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS
94 PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as
required
95 1.14.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire Mtrs. 225.00 233.00 52,425.00
96 1.14.4 2x 6 sqmm+ 1x 6 sqmm earth wire Mtrs. 50.00 439.00 21,950.00
Supplying and fixing suitable size GI box with modular plate and cover in front on
97 1.32 surface or in recess including providing and fixing 6 pin 5/6 & 15/16 Amp modular Each 2.00 586.00 1,172.00
socket outlet and 15/16 A modular switch, connection etc. as required.

Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp,
of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top
98 10.18 surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. Each 4.00 352.00 1,408.00
sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp
shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel,
MCB distribution board, 415 V, onsurface/ recess, complete with tinned copper bus bar,
99 2.4
neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing
etc. as required. (But without MCB/RCCB/Isolator)
100 2.4.2 6 way (4+18),Double door Each 1.00 4,974.00 4,974.00
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution
board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar,
101 DSR-2.3
earth bar,din bar, interconnections, powder painted including earthing etc. as required.
(But without MCB/RCCB/Isolator)
102 DSR-2.3.1 6 way, double door Each 5.00 2,206.00 11,030.00
Supplying & fixing 6 amps to 32 amps rating 240/415 volts C curve Miniature Circuit
103 2.1 Breaker suitable for inductive load of following poles in the existing MCB DB complete -
with connections, testing and commissioning etc. as required.
104 2.10.1 Single Pole Each 33.00 256.00 8,448.00
Supply & fixing of single pole blanking plate in the existing MCB DB complete etc. as
105 2.11 Each 5.00 13.00 65.00
required
Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB
106 MR
DB complete with connections, testing and commissioning etc. as required.
107 25 amps Each 5.00 1,770.00 8,850.00
108 40 amps
Supplying and fixing of following rating four pole 415 V MCCB in the existing MCCB DB
109 MR
complete with connections ,testing and commissioning etc as required.
110 63 amps Each 1.00 1,848.00 1,848.00
Supply, installing, testing & commissioning of Track light 24W LED.
111 MR Nos. 34.00 1,803.00 61,302.00

Total for Electrical items 23,58,973.00 10,19,636.00

Total 7,60,03,020.60 39,96,981.00

Grand Total of the Project 8,00,00,001.60

Digitally signed by
Pages 9 of 9 CHANDRESH KUMAR
Date: 2025.03.07 19:05:47 IST