Documentation
folder
Number T6195-3
Project number 12200503
Page 1 of 1
Number Pages Description Remark
Block diagrams
6195/4-01 1 DS-500 block diagram -
6195/4-02 1 DS-502 block diagram -
Exploded views
6195/4-03 1 DS-500 exploded view -
6195/4-04 1 DS-502 exploded view -
Electronics
6195/4-05 1 TPB-2857 main board -
6195/4-06 1 PL2857; IC list on the board -
6195/4-07 1 TPB-2858 A/D board -
6195/4-08 1 PL2858; IC list on the board -
6195/4-09 1 STB-2158 mainboard & A/D board -
6195/4-10 1 PL2158; IC list on the board -
6195/4-11 1 STB-2158 mainboard -
6195/4-12 1 PLS2158V1.0; IC list on the board -
6195/4-13 1 STB-2120- A/D board -
6195/4-14 1 PLS2120; IC list on the board -
Load cell
6195/4-15 1 DS-500 load cell assembly -
6195/4-16 2 Load cell type J specification sheet -
Sealing
6195/4-17 1 DS-500 sealing position -
The measuring instrument for which the type examination is granted, is described in the above
mentioned documentation as far as:
(a) this documentation is not in conflict with legal regulations or the intent of this type examination
(b) this type examination does not deviate from the stated documentation.
500
Doc no 6195/4-01
Page 1 of 1
Drawing no. DS-502-BD1
Doc no 6195/4-02
Page 1 of 1
Doc no 6195/4-03
Page 1 of 1
Doc no 6195/4-04
Page 1 of 1
Doc no 6195/4-05
Page 1 of 1
Doc no 6195/4-06
Page 1 of 1
Doc no 6195/4-07
Page 1 of 1
Doc no 6195/4-08
Page 1 of 1
o
o
Doc no 6195/4-09
Page 1 of 1
IC list on the board
Drawing number: PLS2158
STB-2158 Main board & A/D Board
IC Number IC type
U1 IC 1232
U2 IC 2985
U3 IC R5F21254 or R5F21255 or R5F21256 or
R5F21257
U4 IC 9793
Doc no 6195/4-10
Page 1 of 1
Doc no 6195/4-11
Page 1 of 1
IC list on the board
Drawing number: PLS2158V1.0
STB-2158 Main board
IC Number IC type
U1 Not used
U2 IC 2985
U3 IC R5F21254 or R5F21255 or R5F21256 or
R5F21257
U4 IC 9793
Doc no 6195/4-12
Page 1 of 1
IC list on the board
Drawing number: PLS2120
STB-2120 A/D BOARD
IC Number IC type
U1 IC 1232
Doc no 6195/4-13
Page 1 of 1
o
o
Doc no 6195/4-14
Page 1 of 1
Doc no 6195/4-15
Page 1 of 1
Load cell specification sheet
Drawing Nr LC-JS 1/2
1. Type J Type Load Cell
off-center / single point
2. Accuracy Class C3
3. Characteristics
a) Maximum Capacity (EMax) 2.3kg , 4.5kg , 9kg , 22.5kg , 45kg
b) Rated Output (R.O.) 1.5mV/V 7.5%
c) Non-linearity Over 0~1/6 of R.O.
d) Hysteresis within 0.01% of R.O.
e) Repeatability Over 1/6~4/6 of R.O.
f) Output error due to temp. within 0.02% of R.O.
(-10 ~ 40 ) Over 4/6~1 of R.O.
g) Cumulative error ( c ~ f ) within 0.03% of R.O.
h) Creep within 0.03% R.O.
Note Output value difference between after loading and 30 minutes after loading.
i) Zero return within 0.01% of R.O.
Note Zero point difference between before loading and after removing a 30 min.
Applied load.
j) Zero shift Due temp. within 0.02% of R.O. per 5
4. Temperature range
a) Range compensated (Operating ) -10 ~ 40
b) Range allowable (storge ) -20 ~ 50
5. Electric factors
a) Applied voltage recommended 5~12 VDC
b) Applied voltage allowable 20 VDC
c) Input impedance 1100 50 ohm
d) Output impedance 1000 10 ohm
e) Insulation resistance 500 Mohm or more
(50 VDC between bridge / earth)
f) Zero balance within 50% of R.O.
g) Output / Input signals
-Applied voltage ( ) red wire
-Applied voltage ( ) white wire
-Output voltage ( ) green wire
-Output voltage ( ) yellow wire
-Earth black wire
Doc no 6195/4-16
Page 1 of 2
Load cell specification sheet
Drawing Nr LC-JS 2/2
6. Mechanical factors
a Safe overload 200 %
b Durability within 0.03% of R.O.
(Output change in between before and after 1 million time loading test of rated
capacity)
7. Protection against moisture
a Protection Butyl rubber sheet
b Moisture compensation 0 ~95 % RH
Doc no 6195/4-16
Page 2 of 2
Doc no 6195/4-17
Page 1 of 1
