Scribd
Upload
10 views1 page

shear

The document presents a bearing capacity analysis for shallow foundations for a food processing unit project in Karnataka, following IS 6403-1981 standards. It includes the bearing capacity equation, soil parameters, and factors of safety, detailing both general and local shear failure scenarios. The analysis provides specific values for safe net bearing capacity based on various foundation dimensions and conditions.

Uploaded by

brahmanna8
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
10 views1 page

shear

The document presents a bearing capacity analysis for shallow foundations for a food processing unit project in Karnataka, following IS 6403-1981 standards. It includes the bearing capacity equation, soil parameters, and factors of safety, detailing both general and local shear failure scenarios. The analysis provides specific values for safe net bearing capacity based on various foundation dimensions and conditions.

Uploaded by

brahmanna8
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

BH NO

STANDARDTEC ENGINEERS PVT LTD


6

BEARING CAPACITY ANALYSIS FOR


SHALLOW FOUNDATIONS
Analysis as per IS 6403-1981

Project : onstruction of Food Processing Units(Tamarind & Peanut Processing Unit ) at


Gudikote, Vijayanagara Dist., in Karnataka State under the Scheme of
Kalyana Karnataka.
The bearing capacity equation is as follows :
qnet safe = (1/FS){cNcz cdc+q(Nq-1)z qdq+0.5BgNgz gdgRw}
where:
qnet safe = safe net bearing capacity c = cohesion intercept
q = overburden pressure B = Foundation width
g = Bulk density of soil below founding level
Rw = Water table correction factor FS = Factor of safety
Nc, Nq, Ng = bearing capacity factors, which are a function of f
dc, dq, dg = Depth factors
zc, zq, zg = Shape factors
Soil parameters : Bulk Density
c= 0.00 T/m2 f = 32.0 degrees GENERAL SHEAR FAILURE Profile
c' = 0.00 T/m2 f'= 22.6 degrees LOCAL SHEAR FAILURE Depth, m g
General Shear Failure : Nc = 35.49 Nq = 23.18 Ng = 30.21 From To T/m3
'
Local Shear Failure : Nc' = 17.59 Nq' = 8.33 Ng = 7.77 0.0 10.0 1.90

Factor of safety = 2.5 as per IS 1904-1986

Design Water Table depth = 0.0 m


Rw factor: Constant value(V) for worst condition or
calculate(C) based on WT Depth ? : C
Depth factor to be considered ? Y
For computation of Depth Factor, depth below GL to be ignored to account for loose
soils,poorly compacted backfill above foundation, scour etc. = 0.0 m
FAILURE CRITERIA : General SHEAR FAILURE

qnet safe ,
Safe Net
Depth,m

Foundation Depth factors Depth factors


FOUN- Shape Factors Bearing
Dimensions DATION Rw (GSF) (LSF) T/m2
Capacity
B, m L, m SHAPE zc zq zg dc dq dg dc' dq' dg' GSF LSF T/m2
2.0 2.0 square 1.00 0.50 1.30 1.20 0.80 1.18 1.09 1.09 20.5 20.5
2.0 2.0 square 2.00 0.50 1.30 1.20 0.80 1.36 1.18 1.18 33.4 33.4
2.0 2.0 square 3.00 0.50 1.30 1.20 0.80 1.50 1.27 1.27 48.2 48.2

You might also like