1206A-E70TTAG3

248.5 kWm (Gross) @ 1500 rpm

238.6 kWm (Gross) @ 1800 rpm
Series
ElectropaK
Basic technical data Performance
Number of cylinders .. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ..6 Cyclic irregularity for engine standby power
Cylinder arrangement.. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. . Vertical, inline At 110%.. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. .. 0.11
Cycle.. .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. .4 stroke DI Ratings
Induction system.. .. ... .. ... .. ... .. ... .. ... .. ... Twin turbo charge cooled Steady state speed stability at constant load.. .. ... .. ... .. ... .. .. ± 0.25 %
Compression ratio .. .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. .15.8:1 Average sound pressure level for bare engine
Bore .. .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. 105 mm (excluding inlet and exhaust noise) at 1 metre .. .. .. . .. .. . 113db/1500(A)
Stroke .. .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . 135 mm Average sound pressure level for bare engine
(excluding inlet and exhaust noise) at 1 metre .. .. .. . .. .. . 117db/1800(A)
Displacement.. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... . 7.01 litres
Direction of rotation when viewed from flywheel.. .. ... .. ... Anticlockwise Notes: 
Firing order .. .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. .1, 5, 3, 6, 2, 4 • all data based on operation to ISO 3046/1:2002 standard
reference conditions.
Estimated total weight including radiator support brackets
Dry .. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... . 797 kg • for engines operating in ambient conditions other than the
standard reference conditions stated below, a suitable derate must
Wet.. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... . 832 kg be applied

Overall dimensions of ElectropaK • derate tables for increased ambient temperature and/or altitude
are available, please contact Perkins Applications Department.
Height, including radiator support brackets .. .. ... .. ... .. ... .. ... 1426 mm
Length, front of radiator to rear of air cleaner.. .. ... .. ... .. ... .. . 1878 mm
Test conditions
Width .. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. 949 mm
Air temperature .. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... 25°C
Moments of inertia (MK²) Barometric pressure .. .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . 101 kPa
Engine rotational components .. .. ... .. ... .. ... .. ... .. ... .. ... 0.4269 kgm² Relative humidity.. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... ..10.7%
Flywheel .. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... . 1.26 kgm² Air inlet restriction at maximum power.. .. ... .. ... .. ... .. ... .. ... .. ...5 kPa
Exhaust back pressure at maximum power (turbo outlet)
Centre of gravity
1500 rpm.. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... 30 kPa
Forward from rear of block.. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... 476 mm
1800 rpm.. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. 25.1 kPa
Above centre line of block .. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... 199 mm
Fuel temperature (inlet pump).. .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. 40°C
All ratings certified to within.. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... . ± 3%

1 of 4
Publication No. TPD2126E2, January 2020.
Copyright © 2019 Perkins Engines Company Limited, all rights Perkins Engines Company Limited
reserved. No part of this document may be reproduced in any form Peterborough, PE1 5FQ, United Kingdom
or by any means, without prior written permission of Perkins Engines Tel: +44 (0)1733 583000
Company Limited. The information in this document is substantially Fax: +44 (0)1733 582240
correct at the time of printing and may be altered subsequently. www.perkins.com
General installation
Engine speed @ 1500 rpm Engine speed @ 1800 rpm
Designation Units
Prime (50Hz) Standby (50Hz) Prime (60Hz) Standby (60Hz)

Gross engine power kWb 226.8 248.5 216.8 238.6

Gross BMEP kPa 2588.6 2836.7 2062.2 2269.7

Mean piston speed m/s 6.75 8.1

ElectropaK nett engine power kW 217.8 239.5 201.8 223.6

Engine coolant flow against 35 kPa restriction litres/min 249 300

Combustion air flow kg/h 981.4 1117.4 975.4 1024.0

Combustion air flow m³/min 13.7 15.6 13.6 14.3

Exhaust gas flow (maximum) at atmospheric pressure m³/min 30.62 34.12 28.65 31.56

Exhaust gas temperature (maximum) TC out °C 492 522 443 501

Overall thermal efficiency % 39.4 37.9 39.4 38.4

kWe 200 220 180 200

Typical Generator sets electrical output (0.8pf 25ºC)
kVA 250 275 225 250

Assumed alternator efficiency % 92 89.5

Energy balance
Engine speed @ 1500 rpm Engine speed @ 1800 rpm
Designation Units
Prime (50Hz) Standby (50Hz) Prime (60Hz) Standby (60Hz)

Energy in fuel kWt 576 656.4 550.8 621.1

Energy in power output (gross) kWb 226.8 248.5 216.8 238.6

Energy to cooling fan kWm 9 15

Energy in power output (nett) kWm 217.8 239.5 201.8 223.6

Energy to exhaust kWt 240.8 284.6 223.5 254.3

(Not to be utilised for heat recovery, does include energy input from combustion air.)

Energy to ACC coolant kWt 47 55.8 42.7 46.6

Energy to coolant radiator kWt 114.5 127.7 121.1 135.3

Energy to radiation (atmosphere) kWt 28.8 32.8 27.5 31

Includes heat rejected to fuel (via return to tank flow)

2 of 4
Publication No. TPD2126E2, January 2020.
Copyright © 2019 Perkins Engines Company Limited, all rights Perkins Engines Company Limited
reserved. No part of this document may be reproduced in any form Peterborough, PE1 5FQ, United Kingdom
or by any means, without prior written permission of Perkins Engines Tel: +44 (0)1733 583000
Company Limited. The information in this document is substantially Fax: +44 (0)1733 582240
correct at the time of printing and may be altered subsequently. www.perkins.com
Cooling system Fuel specification
USA Fed Off Highway.. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... ASTM D975
Total coolant capacity Europe Off Highway.. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. EN590
ElectropaK (with radiator) .. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... 25 litres
ElectropaK (without radiator) .. .. ... .. ... .. ... .. ... .. ... .. ... .. .. 13.7 litres Note:  or further information on fuel specifications and restrictions,
F
Maximum top tank temperature .. .. ... .. ... .. ... .. ... .. ... .. ... .. ... 112°C refer to the OMM fuels section for this engine model.
Maximum static pressure head on pump.. .. ... .. ... .. ... .. ... .. ... 70 kPa
Temperature rise across engine.. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. .8°C Fuel consumption
Maximum permissible external system resistance .. .. ... .. ... .. ... .. ... ..
.. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... 11.2°C (275kVa), 9.6°C (200ekw) 226.8kW/1500 rpm Prime
Power rating %
Thermostat operation range.. .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. 82-93°C g/kWh litres/hr
Radiator 25 231.4 15.6
Radiator face area .. .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . ..0.444 m² 50 205.3 27.7
Material and number of rows.. .. ... .. ... .. ... .. ... .. ... .. ... Aluminium 57 75 204.9 41.5
Material and fins per inch .. .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. 10
100 211.9 57.2
Width of matrix .. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. 550 mm
Height of matrix.. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... . 800 mm 110 220.3 64.5
Pressure cap setting .. .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . 100 kPa

Fan 216.6kW/1800 rpm Prime

Power rating %
Type.. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. .. Pusher Fan g/kWh litres/hr
Diameter .. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. . 724 mm
25 262.4 17
Number of blades.. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... ..7
Material.. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... Heramid & Steel 50 217.1 28.1
Drive ratio .. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ..1.33:1 75 208.9 40.5
Airflow at rated speed.. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... 4.42 m³/min 100 211.5 54.6
Recommended coolant 110 217.1 61.7
Recommended coolant: 50% anti freeze / 50% water.
For details of recommended coolant specifications, please refer to the
Operation and Maintenance Manual (OMM) for this engine model. Cold start recommendations
Duct allowance Minimum battery cold cranking amps
Maximum additional restriction (duct allowance) to cooling airflow and Air temperature/oil With glow plugs Without glow
resultant minimum airflow viscosity limit 12V AZF and P5 plugs 12V AZF
-5°C 15W40 950 15W40 950
Ambient clearance Duct allowance
Power m³/sec
°C (Pa) -10°C 15W40 950 15W40 950

250 kVA (50Hz) 50 200 4.42 -15°C 10W40 1650 15W40 (1)

-20°C 10W40 1650 10W40 (1)

275 kVA (50Hz) 40 200 4.42
-25°C 5W30 1900 5W30 (1)

200 kWe (60Hz) 50 200 5.62

Maximum battery CCA 2400 2400

Note: Glow plugs needed below -10°C.

Fuel system Note: For cable sizes see Applications and Installation Manual.
Type of injection .. .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. Common Rail 1. Must use glow plugs.
Fuel injection pump.. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. . Denso HP4
Fuel injector .. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... Denso G3S
Nozzle opening pressure .. .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. 5 MPa
Maximum particle size .. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... . 4 Microns
Fuel lift pump type.. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. Brushless Electric
Flow/hour.. .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. 3.5 Litres/hour @ 200 kPa
Maximum low pressure system pressure
Pressure measured at ELP inlet.... .. .. ... .. ... .. ... .. ... ..--20 to +15 kPa
Maximum fuel temperature at lift pump inlet.. .. .. . .. .. . .. .. . .. .. . .. .. 75°C
Maximum fuel filter service interval .. .. ... .. ... .. ... .. ... .. ... .. 500 hours
Governor type .. .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. Electronic ECM
Speed control conforms to.. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... N/A

3 of 4
Publication No. TPD2126E2, January 2020.
Copyright © 2019 Perkins Engines Company Limited, all rights Perkins Engines Company Limited
reserved. No part of this document may be reproduced in any form Peterborough, PE1 5FQ, United Kingdom
or by any means, without prior written permission of Perkins Engines Tel: +44 (0)1733 583000
Company Limited. The information in this document is substantially Fax: +44 (0)1733 582240
correct at the time of printing and may be altered subsequently. www.perkins.com
Lubrication system Electrical system
Alternator....................................................................100 amps/12 volts.
Total system capacity Starter motor...................................................................... 5 kW/12 volts.
Maximum sump capacity............................................................ 16 litres Number of teeth on flywheel..............................................................134.
Minimum sump capacity............................................................. 13 litres Number of teeth on starter pinion.........................................................13.
Engine stop method.........................................................................ECM
Maximum oil temperature (continuous operation)..........................125°C
Maximum oil temperature (intermittent operation).........................135°C
Engine mounting
Lubricating oil pressure
Maximum static bending moment at rear face of block.............. 1130 Nm
Relief valve opens.............................................................. 545-595 kPa
Minimum oil pressure..................................................................300 kPa
At maximum no-load speed........................................................700 kPa
Load acceptance
Oil flow at rated speed......................................................... 70 litres/min The figures below comply with the requirements of classification 3 and 4
Oil consumption at full load rated speed............................. 0.08% of fuel of ISO 8528-12 and G2 operating limits stated in ISO 8528-5.

Maximum engine operating angles Initial load application: When engine reaches rated speed
(15 seconds after engine starts to crank)
Front up, front down, right side or left side.......................................... 30°
Prime power Standby power
Description Units
Recommended SAE viscosity 60 Hz 50 Hz 60 Hz 50 Hz

A single or multigrade oil conforming to API-CH-4 or ACEA E5 must be used. Prime power % 67 60 67 55

Viscosity grade Load kWm 138 131 138 131

15W-40 Frequency recovery Seconds 0.7 0.95 0.7 0.95

10W-40
10W-30 The figures shown in the table above were obtained under the following
5W-40 test conditions:
5W-30 Engine block temperature .. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. . 90°C
0W-40 Ambient temperature .. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. . 25°C
0W-30
Governing mode .. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ...0 %
Alternator inertia .. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. 2.93 kgm²
-50 -40 -30 -20 -10 0 10 20 30 40 50 60
Under frequency roll off (UFRO) point set to .. 20 %volt/10 %Frequency
Ambient temperature °C LAM on/off .. .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. ... .. off.

Note:  ll tests were conducted using an engine installed and serviced

A
Induction system to Perkins Engines Company Limited recommendations.
Note: Derate curves for altitude and humidity can be found in
Maximum air intake restriction of engine Engine Specification Manual.
Clean filter......................................................................................3 kPa Note: The general arrangement drawings shown in this data sheet
are for guidance only. The latest versions should be requested
Dirty filter.........................................................................................8 kPa
from the Perkins Applications Department.

Exhaust system
Exhaust outlet size.....................................................................76.3 mm
Maximum back pressure (exhaust elbow outlet).............................7 kPa

4 of 4
Publication No. TPD2126E2, January 2020.
Copyright © 2019 Perkins Engines Company Limited, all rights Perkins Engines Company Limited
reserved. No part of this document may be reproduced in any form Peterborough, PE1 5FQ, United Kingdom
or by any means, without prior written permission of Perkins Engines Tel: +44 (0)1733 583000
Company Limited. The information in this document is substantially Fax: +44 (0)1733 582240
correct at the time of printing and may be altered subsequently. www.perkins.com