No Standard Number Description

1 BS 466:1984 Power Driven overhead travelling cranes

2 BS 1199 and 1200:1976 Specifications for building sands from natural sources

3 BS 1247-1:1990 Manhole steps. Specification for galvanized ferrous or stainless steel manhole steps

4 BS 1247-2:1990 Manhole steps. Specification for plastics encapsulated manhole steps

5 BS 1247-3:1991 Manhole steps. Specification for aluminium manhole steps

6 BS 1305:1974 Specification for batch type concrete mixers

7 BS 1377-1:1990 Methods of test for soils for civil engineering purposes. General requirements and sample preparation

8 BS 1377-2:1990 Methods of test for soils for civil engineering purposes. Classification tests

9 BS 1377-3:1990 Methods of test for soils for civil engineering purposes. Chemical and electro-chemical tests

10 BS 1377-4:1990 Methods of test for soils for civil engineering purposes. Compaction-related tests

11 BS 1377-5:1990 Methods of test for soils for civil engineering purposes. Compressibility, permeability and durability tests

Methods of test for soils for civil engineering purposes. Consolidation and permeability tests in hydraulic cells and with pore
12 BS 1377-6:1990
pressure measurement

13 BS 1377-7:1990 Methods of test for soils for civil engineering purposes. Shear strength tests (total stress)

14 BS 1377-8:1990 Methods of test for soils for civil engineering purposes. Shear strength tests (effective stress)

15 BS 1377-9:1990 Methods of test for soils for civil engineering purposes. In-situ tests

16 BS 1449-1.1:1991 Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip. General specification

Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip. Specification for hot rolled narrow strip
17 BS 1449-1.14:1991
supplied in a range of conditions for heat treatment and general engineering purposes

Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip. Specification for hot rolled narrow strip
18 BS 1449-1.8:1991
based on formability

19 BS 1453:1972 Specification for filler materials for gas welding

20 BS 1521:1972 Specification for waterproof building papers

21 BS 1640-1:1962 Specification for steel butt-welding pipe fittings for the petroleum industry. Wrought carbon and ferritic alloy steel fittings

22 BS 1722-1:1999 Fences. Specification for chain link fences

23 BS 1722-1:1999 Fences. Specification for chain link fences

24 BS 1722-10:1999 Fences. Specification for anti-intruder fences in chain link and welded mesh

25 BS 1722-10:1999 Fences. Specification for anti-intruder fences in chain link and welded mesh

26 BS 1722-11:2000 Fences. Specification for prefabricated wood panel fences

Page 1/36
No Standard Number Description

27 BS 1722-11:2000 Fences. Specification for prefabricated wood panel fences

28 BS 1722-12:1999 Fences. Specification for steel palisade fences

29 BS 1722-12:1999 Fences. Specification for steel palisade fences

30 BS 1722-13:1978 Fences. Chain link fences for tennis court surrounds

31 BS 1722-13:1978 Fences. Chain link fences for tennis court surrounds

32 BS 1722-14:2001 Fences. Specification for open mesh steel panel fences

33 BS 1722-14:2001 Fences. Specification for open mesh steel panel fences

34 BS 1722-16:1992 Fences. Specification for organic powder coatings to be used as a plastics finish to components and mesh

35 BS 1722-16:1992 Fences. Specification for organic powder coatings to be used as a plastics finish to components and mesh

36 BS 1722-2:2000 Fences. Specification for strained wire and wire mesh netting fences

37 BS 1722-2:2000 Fences. Specification for strained wire and wire mesh netting fences

38 BS 1722-4:1986 Fences. Specification for cleft chestnut pale fences

39 BS 1722-4:1986 Fences. Specification for cleft chestnut pale fences

40 BS 1722-5:1999 Fences. Specification for close-boarded and wooden palisade fences

41 BS 1722-5:1999 Fences. Specification for close-boarded and wooden palisade fences

42 BS 1722-7:1999 Fences. Specification for wooden post and rail fences

43 BS 1722-7:1999 Fences. Specification for wooden post and rail fences

44 BS 1722-8:1997 Fences. Specification for mild steel (low carbon steel) continuous bar fences and hurdles

45 BS 1722-8:1997 Fences. Specification for mild steel (low carbon steel) continuous bar fences and hurdles

46 BS 1722-9:2000 Fences. Specification for mild steel (low carbon steel) fences with round or square verticals and flat horizontals

47 BS 1722-9:2000 Fences. Specification for mild steel (low carbon steel) fences with round or square verticals and flat horizontals

48 BS 1723-3:1988 Brazing. Methods for non-destructive and destructive testing

49 BS 1724:1990 Specification for bronze welding by gas

50 BS 1881-101:1983 Testing concrete. Method of sampling fresh concrete on site

51 BS 1881-102:1983 Testing concrete. Method for determination of slump

52 BS 1881-103:1993 Testing concrete. Method for determination of compacting factor

53 BS 1881-104:1983 Testing concrete. Method for determination of Vebe time

Page 2/36
No Standard Number Description

54 BS 1881-105:1984 Testing concrete. Method for determination of flow

55 BS 1881-106:1983 Testing concrete. Methods for determination of air content of fresh concrete

56 BS 1881-107:1983 Testing concrete. Method for determination of density of compacted fresh concrete

57 BS 1881-108:1983 Testing concrete. Method for making test cubes from fresh concrete

58 BS 1881-109:1983 Testing concrete. Method for making test beams from fresh concrete

59 BS 1881-110:1983 Testing concrete. Method for making test cylinders from fresh concrete

60 BS 1881-111:1983 Testing concrete. Method of normal curing of test specimens (20°C method)

61 BS 1881-112:1983 Testing concrete. Methods of accelerated curing of test cubes

62 BS 1881-113:1983 Testing concrete. Method for making and curing no-fines test cubes

63 BS 1881-114:1983 Testing concrete. Methods for determination of density of hardened concrete

64 BS 1881-115:1986 Testing concrete. Specification for compression testing machines for concrete

65 BS 1881-116:1983 Testing concrete. Method for determination of compressive strength of concrete cubes

66 BS 1881-117:1983 Testing concrete. Method for determination of tensile splitting strength

67 BS 1881-118:1983 Testing concrete. Method for determination of flexural strength

Testing concrete. Method for determination of compressive strength using portions of beams broken in flexure (equivalent
68 BS 1881-119:1983
cube method)

69 BS 1881-121:1983 Testing concrete. Method for determination of static modulus of elasticity in compression

70 BS 1881-122:1983 Testing concrete. Method for determination of water absorption

71 BS 1881-124:1988 Testing concrete. Methods for analysis of hardened concrete

72 BS 1881-125:1986 Testing concrete. Methods for mixing and sampling fresh concrete in the laboratory

Testing concrete. Method of verifying the performance of a concrete cube compression machine using the comparative cube
73 BS 1881-127:1990
test

74 BS 1881-128:1997 Testing concrete. Methods for analysis of fresh concrete

75 BS 1881-129:1992 Testing concrete. Method for determination of density of partially compacted semi-dry fresh concrete

76 BS 1881-130:1996 Testing concrete. Method for temperature-matched curing of concrete specimens

77 BS 1881-131:1998 Testing concrete. Methods for testing cement in a reference concrete

78 BS 1881-201:1986 Testing concrete. Guide to the use of non-destructive methods of test for hardened concrete

79 BS 1881-203:1986 Testing concrete. Recommendations for measurement of velocity of ultrasonic pulses in concrete

80 BS 1881-204:1988 Testing concrete. Recommendations on the use of electromagnetic covermeters

Page 3/36
No Standard Number Description

81 BS 1881-205:1986 Testing concrete. Recommendations for radiography of concrete

82 BS 1881-206:1986 Testing concrete. Recommendations for determination of strain in concrete

83 BS 1881-207:1992 Testing concrete. Recommendations for the assessment of concrete strength by near-to-surface tests

84 BS 1881-208:1996 Testing concrete. Recommendations for the determination of the initial surface absorption of concrete

85 BS 1881-209:1990 Testing concrete. Recommendations for the measurement of dynamic modulus of elasticity

86 BS 1881-5:1970 Testing concrete. Methods of testing hardened concrete for other than strength

87 BS 1965-1:1963 Specification for butt-welding pipe fittings for pressure purposes. Carbon steel

88 BS 2633:1987 Specification for Class I arc welding of ferritic steel pipework for carrying fluids

BS 2782-11:Method 1150B:1998, ISO Methods of testing plastics. Thermoplastics pipes, fittings and valves. Plastics pipes and fittings. Preparation of polyethylene
89
11414:1996 (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion

BS 2782-11:Method 1150E:1997, ISO Methods of testing plastics. Thermoplastics pipes, fittings and valves. Plastics pipes and fittings. Preparation of test piece
90
11413:1996 assemblies between a polyethylene (PE) pipe and an electrofusion fitting

BS 2782-8:Method 820A:1996, ISO

91 Methods of testing plastics. Other properties. Determination of water vapour transmission rate (dish method)
2528:1995

92 BS 2853:1957 Specification for the design and testing of steel overhead runway beams

93 BS 2901-3:1990 Filler rods and wires for gas-shielded arc welding. Specification for copper and copper alloys

94 BS 2901-4:1990 Filler rods and wires for gas-shielded arc welding. Specification for aluminium and aluminium alloys and magnesium alloys

95 BS 2901-5:1990 Filler rods and wires for gas-shielded arc welding. Specification for nickel and nickel alloys

96 BS 2971:1991 Specification for class II arc welding of carbon steel pipework for carrying fluids

97 BS 3148:1980 Methods of test for water for making concrete (including notes on the suitability of the water)

98 BS 3262-3:1989 Hot-applied thermoplastic road marking materials. Specification for application of material to road surfaces

99 BS 3643-1:1981 ISO metric screw threads. Principles and basic data

100 BS 3643-2:1981 ISO metric screw threads. Specification for selected limits of size

101 BS 3892-1:1997 Pulverized-fuel ash. Specification for pulverized-fuel ash for use with Portland cement

102 BS 3892-2:1996 Pulverized-fuel ash. Specification for pulverized-fuel ash to be used as a Type I addition

103 BS 3892-3:1997 Pulverized-fuel ash. Specification for pulverized-fuel ash for use in cementitious grouts

104 BS 3974-1:1974 Specification for Pipe Supports Part 1

105 BS 4027:1996 Specification for sulfate-resisting Portland cement

106 BS 4102:1998 Specification for steel wire for general fencing purposes

107 BS 4190:2001 ISO metric black hexagon bolts, screws and nuts. Specification

Page 4/36
No Standard Number Description

108 BS 4274-1:2003 Visual acuity test types. Test charts for clinical determination of distance visual acuity. Specification

109 BS 4320:1968 Specification for metal washers for general engineering purposes. Metric series

110 BS 4395-1:1969 Specification for high strength friction grip bolts and associated nuts and washers for structural engineering. General grade

Specification for high strength friction grip bolts and associated nuts and washers for structural engineering. Higher grade
111 BS 4395-2:1969
bolts and nuts and general grade washers

112 BS 4449:1997 Specification for carbon steel bars for the reinforcement of concrete

113 BS 4479-1:1990 Design of articles that are to be coated. General recommendations

114 BS 4479-5:1990 Design of articles that are to be coated. Recommendations for anodic oxidation coatings

115 BS 4482:1985 Specification for cold reduced steel wire for the reinforcement of concrete

116 BS 4483:1998 Steel fabric for the reinforcement of concrete

117 BS 4483:1998 Steel fabric for the reinforcement of concrete

118 BS 4504-3.3:1989 Circular flanges for pipes, valves and fittings (PN designated). Specification for copper alloy and composite flanges

119 BS 4550-0:1978 Methods of testing cement. General introduction

120 BS 4550-3.1:1978 Methods of testing cement. Physical tests. Introduction

121 BS 4550-3.4:1978 Methods of testing cement. Physical tests. Strength tests

122 BS 4550-3.8:1978 Methods of testing cement. Physical tests. Test for heat of hydration

123 BS 4550-6:1978 Methods of testing cement. Standard sand for mortar cubes

124 BS 4570:1985 Specification for fusion welding of steel castings

125 BS 4604-1:1970 Specification for the use of high strength friction grip bolts in structural steelwork. Metric series. General grade

126 BS 4604-2:1970 Specification for the use of high strength friction grip bolts in structural steelwork. Metric series. Higher grade (parallel shank)

127 BS 4660:2000 Thermoplastics ancillary fittings of nominal sizes 110 and 160 for below ground gravity drainage and sewerage

128 BS 4677:1984 Specification for arc welding of austenitic stainless steel pipework for carrying fluids

129 BS 4721:1981 Specification for ready-mixed building mortars

Specification for approval testing of welders working to approved welding procedures. Arc welding of tube to tube-plate joints
130 BS 4871-3:1985
in metallic materials

131 BS 4872-1:1982 Specification for approval testing of welders when welding procedure approval is not required. Fusion welding of steel

Specification for approval testing of welders when welding procedure approval is not required. TIG or MIG welding of
132 BS 4872-2:1976
aluminium and its alloys

133 BS 4887-1:1986 Mortar admixtures. Specification for air-entraining (plasticizing) admixtures

134 BS 4887-2:1987 Mortar admixtures. Specification for set retarding admixtures

Page 5/36
No Standard Number Description

135 BS 4921:1988 Specification for sherardized coatings on iron or steel

136 BS 4929-1:1973 Specification for steel hexagon prevailing-torque type nuts. Metric series

137 BS 4929-2:1973 Specification for steel hexagon prevailing-torque type nuts. Unified (inch) series

Coated macadam (asphalt concrete) for roads and other paved areas. Specification for constituent materials and for
138 BS 4987-1:2001
mixtures

139 BS 4987-2:2001 Coated macadam (asphalt concrete) for roads and other paved areas. Specification for transport, laying and compaction

140 BS 499-1:1991 Welding terms and symbols. Glossary for welding, brazing and thermal cutting

141 BS 499-1:Supplement:1992 Welding terms and symbols. Supplement. Definitions for electric welding equipment

142 BS 5114:1975 Specification for performance requirements for joints and compression fittings for use with polyethylene pipes

143 BS 5163:1986 Specification for predominantly key-operated cast iron gate valves for waterworks purposes

144 BS 5212-1:1990 Cold applied joint sealant systems for concrete pavements. Specification for joint sealants

145 BS 5212-2:1990 Cold applied joint sealant systems for concrete pavements. Code of practice for the application and use of joint sealants

146 BS 5212-3:1990 Cold applied joint sealant systems for concrete pavements. Methods of test

147 BS 5328-1:1997 Concrete. Guide to specifying concrete

148 BS 5328-2:1997 Concrete. Methods for specifying concrete mixes

149 BS 5328-3:1990 Concrete. Specification for the procedures to be used in producing and transporting concrete

150 BS 5328-4:1990 Concrete. Specification for the procedures to be used in sampling, testing and assessing compliance of concrete

151 BS 5400-1:1988 Steel, concrete and composite bridges. General statement

152 BS 5400-2:1978 Steel, concrete and composite bridges. Specification for loads

153 BS 5400-3:2000 Steel, concrete and composite bridges. Code of practice for design of steel bridges

154 BS 5400-4:1990 Steel, concrete and composite bridges. Code of practice for design of concrete bridges

155 BS 5400-5:1979 Steel, concrete and composite bridges. Code of practice for design of composite bridges

Steel, concrete and composite bridges. Specification for materials and workmanship, concrete, reinforcement and
156 BS 5400-7:1978
prestressing tendons

Steel, concrete and composite bridges. Recommendations for materials and workmanship, concrete, reinforcement and
157 BS 5400-8:1978
prestressing tendons

158 BS 5400-9.1:1983 Steel, concrete and composite bridges. Bridge bearings. Code of practice for design of bridge bearings

Steel, concrete and composite bridges. Bridge bearings. Specification for materials, manufacture and installation of bridge
159 BS 5400-9.2:1983
bearings

160 BS 5481:1977 Specification for unplasticized PVC pipe and fittings for gravity sewers

161 BS 5531:1988 Code of practice for safety in erecting structural frames

Page 6/36
No Standard Number Description

162 BS 5534:2003 Code of practice for slating and tiling (including shingles)

163 BS 5534-1:1997 Code of practice for slating and tiling. Design

Fire precautions in the design, construction and use of buildings. Guide to fire safety codes of practice for particular
164 BS 5588-0:1996
premises/applications

165 BS 5588-1:1990 Fire precautions in the design, construction and use of buildings. Code of practice for residential buildings

166 BS 5588-10:1991 Fire precautions in the design, construction and use of buildings. Code of practice for shopping complexes

Fire precautions in the design, construction and use of buildings. Code of practice for shops, offices, industrial, storage and
167 BS 5588-11:1997
other similar buildings

Fire precautions in the design, construction and use of buildings. Code of practice for smoke control using pressure
168 BS 5588-4:1998
differentials

169 BS 5588-5:1991 Fire precautions in the design, construction and use of buildings. Code of practice for firefighting stairs and lifts

170 BS 5588-6:1991 Fire precautions in the design, construction and use of buildings. Code of practice for places of assembly

171 BS 5588-7:1997 Fire precautions in the design, construction and use of buildings. Code of practice for the incorporation of atria in buildings

172 BS 5588-8:1999 Fire precautions in the design, construction and use of buildings. Code of practice for means of escape for disabled people

Fire precautions in the design, construction and use of buildings. Code of practice for ventilation and air conditioning
173 BS 5588-9:1999
ductwork

174 BS 5628-1:1992 Code of practice for use of masonry. Structural use of unreinforced masonry

175 BS 5628-2:2000 Code of practice for use of masonry. Structural use of reinforced and prestressed masonry

176 BS 5628-3:2001 Code of practice for use of masonry. Materials and components, design and workmanship

Guide toQuality Control and Perpormance Improvement Using Qualitative(attribute) Part 1: Data Uses and Value of Attribute
177 BS 5701-1:2003
Charts in Business,industry commerce and public service

Guide toQuality Control and Perpormance Improvement Using Qualitative(attribute) DataPart 2:Fundamentals of Standard
178 BS 5701-2:2003
attribute charting for monitoring control and improvement

Guide toQuality Control and Perpormance Improvement Using Qualitative(attribute) DataPart 3:Technical aspects of attribute
179 BS 5701-3:2003
charting:Special situation handling

Guide toQuality Control and Perpormance Improvement Using Qualitative(attribute) DataPart 4:Attribute inspection
180 BS 5701-4:2003
performance control and improvement

Precast concrete pipes, fittings and ancillary products. Specification for unreinforced and reinforced concrete pipes (including
181 BS 5911-1:2002
jacking pipes) and fittings with flexible joints (complementary to BS EN 1916:2002)

Precast concrete pipes, fittings and ancillary products. Specification for unreinforced and reinforced pipes and fittings with
182 BS 5911-100:1988
flexible joints

Precast concrete pipes, fittings and ancillary products. Specification for prestressed non-pressure pipes and fittings with
183 BS 5911-103:1994
flexible joints

184 BS 5911-110:1992 Precast concrete pipes, fittings and ancillary products. Specification for ogee pipes and fittings (including perforated)

185 BS 5911-114:1992 Precast concrete pipes, fittings and ancillary products. Specification for porous pipes

186 BS 5911-120:1989 Precast concrete pipes, fittings and ancillary products. Specification for reinforced jacking pipes with flexible joints

187 BS 5911-2:1982 Precast concrete pipes, fittings and ancillary products. Specification for inspection chambers

Precast concrete pipes, fittings and ancillary products. Specification for unreinforced and reinforced manholes and
188 BS 5911-200:1994
soakaways of circular cross section

Page 7/36
No Standard Number Description

189 BS 5911-230:1994 Precast concrete pipes, fittings and ancillary products. Specification for road gullies and gully cover slabs

Precast concrete pipes, fittings and ancillary products. Specification for unreinforced and reinforced concrete manholes and
190 BS 5911-3:2002
soakaways (complementary to BS EN 1917:2002)

Precast concrete pipes, fittings and ancillary products. Specification for unreinforced and reinforced concrete inspection
191 BS 5911-4:2002
chambers (complementary to BS EN 1917:2002)

192 BS 5930:1999 Code of practice for site investigations

193 BS 5950-1:2000 Structural use of steelwork in building. Code of practice for design. Rolled and welded sections

194 BS 5950-2:2001 Structural use of steelwork in building. Specification for materials, fabrication and erection. Rolled and welded sections

Structural use of steelwork in building. Design in composite construction. Code of practice for design of simple and
195 BS 5950-3.1:1990
continuous composite beams

196 BS 5950-4:1994 Structural use of steelwork in building. Code of practice for design of composite slabs with profiled steel sheeting

197 BS 5950-5:1998 Structural use of steelwork in building. Code of practice for design of cold formed thin gauge sections

198 BS 5950-6:1995 Structural use of steelwork in building. Code of practice for design of light gauge profiled steel sheeting

199 BS 5950-7:1992 Structural use of steelwork in building. Specification for materials and workmanship: cold formed sections

200 BS 5950-8:1990 Structural use of steelwork in building. Code of practice for fire resistant design

201 BS 5950-9:1994 Structural use of steelwork in building. Code of practice for stressed skin design

Plastics pipework (thermoplastics materials). Code of practice for the installation of unplasticized PVC pipework for gravity
202 BS 5955-6:1980
drains and sewers

Plastics pipework (thermoplastics materials). Specification for the installation of thermoplastic pipes and associated fittings
203 BS 5955-8:2001
for use in domestic hot and cold services and heating systems in buildings

204 BS 6031:1981 Code of practice for earthworks

205 BS 6072:1981 Method for magnetic particle flaw detection

Specification for polymeric film for use as a protective sleeving for buried iron pipes and fittings (for site and factory
206 BS 6076:1996
application)

207 BS 638-4:1996 Arc welding power sources, equipment and accessories. Specification for welding cables

Arc welding power sources, equipment and accessories. Specification for power sources for manual arc welding with limited
208 BS 638-9:1990, EN 50060:1989
duty

209 BS 6399-1:1996 Loading for buildings. Code of practice for dead and imposed loads

210 BS 6399-2:1997 Loading for buildings. Code of practice for wind loads

211 BS 6399-3:1988 Loading for buildings. Code of practice for imposed roof loads

212 BS 6465-1:1994 Sanitary installations. Code of practice for scale of provision, selection and installation of sanitary appliances

213 BS 6465-2:1996 Sanitary installations. Code of practice for space requirements for sanitary appliances

Insulating and sheathing materials of electric cables. Additional harmonized non-electrical test methods. Test for TMPU
214 BS 6469-98.1:1996
sheath

Insulating and sheathing materials of electric cables. Test methods used in the United Kingdom but not specified in BS EN
215 BS 6469-99.1:1992
60811 or other Parts of BS 6469. Non-electrical tests

Page 8/36
No Standard Number Description

Insulating and sheathing materials of electric cables. Test methods used in the United Kingdom but not specified in BS EN
216 BS 6469-99.2:1992
60811 or other Parts of BS 6469. Electrical tests

217 BS 6572:1985 Specification for blue polyethylene pipes up to nominal size 63 for below ground use for potable water

218 BS 6572:1985 Specification for blue polyethylene pipes up to nominal size 63 for below ground use for potable water

219 BS 6699:1992 Specification for ground granulated blastfurnace slag for use with Portland cement

220 BS 6906-2:1989 Methods of test for geotextiles. Determination of the apparent pore size distribution by dry sieving

221 BS 6906-3:1989 Methods of test for geotextiles. Determination of water flow normal to the plane of the geotextile under a constant head

222 BS 6906-5:1991 Methods of test for geotextiles. Determination of creep

223 BS 6906-7:1990 Methods of test for geotextiles. Determination of in-plane waterflow

224 BS 6906-8:1991 Methods of test for geotextiles. Determination of sand-geotextile frictional behaviour by direct shear

Design and construction of small kits for oxy-fuel gas welding and allied processes. Specification for kits using refillable gas
225 BS 6942-2:1989
containers for oxygen and fuel gas

226 BS 709:1983 Methods of destructive testing fusion welded joints and weld metal in steel

227 BS 7123:1989 Specification for metal arc welding of steel for concrete reinforcement

Precast concrete flags, kerbs, channels, edgings and quadrants. Precast, unreinforced concrete paving flags and
228 BS 7263-1:2001
complementary fittings. Requirements and test methods

Precast concrete flags, kerbs, channels, edgings and quadrants. Precast, unreinforced concrete kerbs, channels, edgings
229 BS 7263-3:2001
and quadrants. Requirements and test methods

Specification for polyethylene fusion fittings with integral heating element(s) for use with polyethylene pipes for the
230 BS 7336:1990
conveyance of gaseous fuels

231 BS 7358:1990 Specification for close coupled suites with flush capacity of 7.5 L maximum

232 BS 7419:1991 Specification for holding down bolts

233 BS 7419:1991 Specification for holding down bolts

234 BS 7448-1:1991 Fracture mechanics toughness tests. Method for determination of KIc critical CTOD and critical J values of metallic materials

Fracture mechanics toughness tests. Method for determination of KIc, critical CTOD and critical J values of welds in metallic
235 BS 7448-2:1997
materials

Fracture mechanics toughness tests. Method for determination of fracture resistance curves and initiation values for stable
236 BS 7448-4:1997
crack extension in metallic materials

237 BS 747:2000 Reinforced bitumen sheets for roofing. Specification

Pavements constructed with clay, natural stone or concrete pavers. Guide for the structural design of heavy duty pavements
238 BS 7533-1:2001
constructed of clay pavers or precast concrete paving blocks

Pavements constructed with clay, natural stone or concrete pavers. Guide for the structural design of lightly trafficked
239 BS 7533-2:2001
pavements constructed of clay pavers or precast concrete paving blocks

Pavements constructed with clay, natural stone or concrete pavers. Code of practice for laying precast concrete paving
240 BS 7533-3:1997
blocks and clay pavers for flexible pavements

Pavements constructed with clay, natural stone or concrete pavers. Code of practice for the construction of pavements of
241 BS 7533-4:1998
precast concrete flags or natural stone slabs

Pavements constructed with clay, natural stone or concrete pavers. Code of practice for laying natural stone, precast
242 BS 7533-6:1999
concrete and clay kerb units

Page 9/36
No Standard Number Description

243 BS 7570:2000 Code of practice for validation of arc welding equipment

244 BS 76:1974 Specification for tars for road purposes

245 BS 7910:1999 Guide on methods for assessing the acceptability of flaws in metallic structures

246 BS 8004:1986 Foundations

247 BS 8007:1987 Code of practice for design of concrete structures for retaining aqueous liquids

248 BS 8010-1:1989 Code of practice for pipelines. Pipelines on land: general

249 BS 8010-2.1:1987 Code of practice for pipelines. Pipelines on land: design, construction and installation. Ductile iron

Code of practice for pipelines. Pipelines on land: design, construction and installation. Glass reinforced thermosetting
250 BS 8010-2.5:1989
plastics

251 BS 8010-2.8:1992 Code of practice for pipelines. Pipelines on land: design, construction and installation. Steel for oil and gas

252 BS 8010-3:1993 Code of practice for pipelines. Pipelines subsea: design, construction and installation

253 BS 8110-1:1997 Structural use of concrete. Code of practice for design and construction

254 BS 8110-2:1985 Structural use of concrete. Code of practice for special circumstances

255 BS 8110-3:1985 Structural use of concrete. Design charts for singly reinforced beams, doubly reinforced beams and rectangular columns

256 BS 812-100:1990 Testing aggregates. General requirements for apparatus and calibration

257 BS 812-101:1984 Testing aggregates. Guide to sampling and testing aggregates

258 BS 812-102:1989 Testing aggregates. Methods for sampling

259 BS 812-103.1:1985 Testing aggregates. Method for determination of particle size distribution. Sieve tests

260 BS 812-103.2:1989 Testing aggregates. Method for determination of particle size distribution. Sedimentation test

261 BS 812-104:1994 Testing aggregates. Method for qualitative and quantitative petrographic examination of aggregates

262 BS 812-105.1:1989 Testing aggregates. Methods for determination of particle shape. Flakiness index

263 BS 812-105.2:1990 Testing aggregates. Methods for determination of particle shape. Elongation index of coarse aggregate

264 BS 812-106:1985 Testing aggregates. Method for determination of shell content in coarse aggregate

265 BS 812-109:1990 Testing aggregates. Methods for determination of moisture content

266 BS 812-110:1990 Testing aggregates. Methods for determination of aggregate crushing value (ACV)

267 BS 812-111:1990 Testing aggregates. Methods for determination of ten per cent fines value (TFV)

268 BS 812-112:1990 Testing aggregates. Method for determination of aggregate impact value (AIV)

269 BS 812-113:1990 Testing aggregates. Method for determination of aggregate abrasion value (AAV)

Page 10/36
No Standard Number Description

270 BS 812-114:1989 Testing aggregates. Method for determination of the polished-stone value

271 BS 812-117:1988 Testing aggregates. Method for determination of water-soluble chloride salts

272 BS 812-118:1988 Testing aggregates. Methods for determination of sulphate content

273 BS 812-119:1985 Testing aggregates. Method for determination of acid-soluble material in fine aggregate

274 BS 812-120:1989 Testing aggregates. Method for testing and classifying drying shrinkage of aggregates in concrete

275 BS 812-121:1989 Testing aggregates. Method for determination of soundness

276 BS 812-123:1999 Testing aggregates. Method for determination of alkali-silica reactivity. Concrete prism method

277 BS 812-124:1989 Testing aggregates. Method for determination of frost-heave

278 BS 812-2:1995 Testing aggregates. Methods for determination of density

279 BS 8301:1985 Code of practice for building drainage

280 BS 8400:1986 Code of practice for foundations

281 BS 8500-1:2002 Concrete. Complementary British Standard to BS EN 206-1. Method of specifying and guidance for the specifier

282 BS 8500-2:2002 Concrete. Complementary British Standard to BS EN 206-1. Specification for constituent materials and concrete

283 BS 8666:2000 Specification for scheduling, dimensioning, bending and cutting of steel reinforcement for concrete

284 BS 8666:2000 Specification for scheduling, dimensioning, bending and cutting of steel reinforcement for concrete

285 BS 882:1992 Specification for aggregates from natural sources for concrete

286 BS EN 10025:1993 Hot rolled products of non-alloy structural steels. Technical delivery conditions

Mixing water for concrete. Specification for sampling, testing and assessing the suitability of water, including water recovered
287 BS EN 1008:2002
from processes in the concrete industry, as mixing water for concrete

288 BS EN 1011-1:1998 Welding. Recommendations for welding of metallic materials. General guidance for arc welding

289 BS EN 1011-2:2001 Welding. Recommendations for welding of metallic materials. Arc welding of ferritic steels

290 BS EN 1011-3:2000 Welding. Recommendations for welding of metallic materials. Arc welding of stainless steels

291 BS EN 10113-2:1993 Hot-rolled products in weldable fine grain structural steels. Delivery conditions for normalized/normalized rolled steels

292 BS EN 10113-3:1993 Hot-rolled products in weldable fine grain structural steels. Delivery conditions for thermomechanical rolled steels

293 BS EN 1011-4:2000 Welding. Recommendations for welding of metallic materials. Arc welding of aluminium and aluminium alloys

294 BS EN 10223-1:1998 Steel wire and wire products for fences. Zinc and zinc alloy coated steel barbed wire

295 BS EN 10223-2:1998 Steel wire and wire products for fences. Hexagonal steel wire netting for agricultural, insulation and fencing purposes

Page 11/36
No Standard Number Description

296 BS EN 10223-3:1998 Steel wire and wire products for fences. Hexagonal steel wire netting for engineering purposes

297 BS EN 10223-4:1998 Steel wire and wire products for fences. Steel wire welded mesh fencing

298 BS EN 10223-5:1998 Steel wire and wire products for fences. Steel wire woven hinged joint and knotted mesh fencing

299 BS EN 10223-6:1998 Steel wire and wire products for fences. Steel wire chain link fencing

300 BS EN 10223-7:2002 Steel wire and wire products for fences. Steel wire welded panels. For fencing

301 BS EN 10225:2001 Weldable structural steels for fixed offshore structures. Technical delivery conditions

302 BS EN 10228-2:1998 Non-destructive testing of steel forgings. Penetrant testing

303 BS EN 10228-3:1998 Non-destructive testing of steel forgings. Ultrasonic testing of ferritic or martensitic steel forgings

Non-destructive testing of steel tubes. Radiographic testing of the weld seam of automatic fusion arc welded steel tubes for
304 BS EN 10246-10:2000
the detection of imperfections

Non-destructive testing of steel tubes. Liquid penetrant testing of seamless and welded steel tubes for the detection of
305 BS EN 10246-11:2000
surface imperfections

Non-destructive testing of steel tubes. Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the
306 BS EN 10246-12:2000
detection of surface imperfections

Non-destructive testing of steel tubes. Ultrasonic testing of tube ends of seamless and welded steel tubes for the detection of
307 BS EN 10246-17:2000
laminar imperfections

Non-destructive testing of steel tubes. Magnetic particle inspection of tube ends of seamless and welded ferromagnetic steel
308 BS EN 10246-18:2000
tubes for the detection of laminar imperfections

309 BS EN 10253-1:1999 Butt-welding pipe fittings. Wrought carbon steel for general use and without specific inspection requirements

310 BS EN 10256:2000 Non-destructive testing on steel tubes. Qualification and competence of level 1 and level 2 non-destructive testing personnel

Non-destructive testing. Ultrasonic testing of austenitic and austentitic-ferritic stainless steels flat products of thickness equal
311 BS EN 10307:2001
to or greater than 6 mm (reflection method)

312 BS EN 10308:2002 Non-destructive testing. Ultrasonic testing of steel bars

313 BS EN 1043-1:1996 Destructive tests on welds in metallic materials. Hardness testing. Hardness test on arc welded joints

314 BS EN 1043-2:1997 Destructive tests on welds in metallic materials. Hardness testing. Micro hardness testing on welded joints

315 BS EN 1052-1:1999 Methods of test for masonry. Determination of compressive strength

316 BS EN 1052-2:1999 Methods of test for masonry. Determination of flexural strength

317 BS EN 1052-3:2002 Methods of test for masonry. Determination of initial shear strength

318 BS EN 1052-4:2000 Methods of test for masonry. Determination of shear strength including damp proof course

319 BS EN 1097-1:1996 Tests for mechanical and physical properties of aggregates. Determination of the resistance to wear (micro-Deval)

320 BS EN 1097-2:1998 Tests for mechanical and physical properties of aggregates. Methods for the determination of resistance to fragmentation

321 BS EN 1097-3:1998 Tests for mechanical and physical properties of aggregates. Determination of loose bulk density and voids

322 BS EN 1097-4:1999 Tests for mechanical and physical properties of aggregates. Determination of the voids of dry compacted filler

Page 12/36
No Standard Number Description

Tests for mechanical and physical properties of aggregates. Determination of the water content by drying in a ventilated
323 BS EN 1097-5:1999
oven

324 BS EN 1097-6:2000 Tests for mechanical and physical properties of aggregates. Determination of particle density and water absorption

Tests for mechanical and physical properties of aggregates. Determination of the particle density of filler. Pyknometer
325 BS EN 1097-7:1999
method

326 BS EN 1097-8:2000 Tests for mechanical and physical properties of aggregates. Determination of the polished stone value

Tests for mechanical and physical properties of aggregates. Determination of the resistance to wear by abrasion from
327 BS EN 1097-9:1998
studded tyres. Nordic test

328 BS EN 1536:2000 Execution of special geotechnical work Bored Piles

329 BS EN 12062:1998 Non-destructive examination of welds. General rules for metallic materials

330 BS EN 12070:2000 Welding consumables. Wire electrodes, wires and rods for arc welding of creep-resisting steels. Classification

331 BS EN 12071:2000 Welding consumables. Tubular electrodes for gas shielded metal arc welding of creep-resisting steels. Classification

332 BS EN 12072:2000 Welding consumables. Wire electrodes, wires and rods for arc welding of stainless and heat-resisting steels. Classification

Welding consumables. Tubular cored electrodes for metal arc welding with or without a gas shield of stainless and heat-
333 BS EN 12073:2000
resisting steels. Classification

Welding consumables. Quality requirements for manufacture, supply and distribution of consumables for welding and allied
334 BS EN 12074:2000
processes

335 BS EN 12084:2001 Non-destructive testing. Eddy current testing. General principles and guidelines

336 BS EN 12223:2000 Non-destructive testing. Ultrasonic examination. Specification for calibration block No.1

337 BS EN 124:1994 Gully tops and manhole tops for vehicular and pedestrian areas. Design requirements, type testing, marking, quality control

338 BS EN 12504-1:2000 Testing concrete in structures. Cored specimens. Taking, examining and testing in compression

339 BS EN 12504-2:2001 Testing concrete in structures. Non-destructive testing. Determination of rebound number

340 BS EN 12517:1998 Non-destructive examination of welds. Radiographic examination of welded joints. Acceptance levels

Welding consumables. Wire electrodes, wires, rods and deposits for gas shielded metal arc welding of high strength steels.
341 BS EN 12534:1999
Classification

342 BS EN 12535:2000 Welding consumables. Tubular cored electrodes for gas shielded metal arc welding of high strength steels. Classification

343 BS EN 12620:2002 Aggregates for concrete

344 BS EN 12797:2000 Brazing. Destructive tests of brazed joints

345 BS EN 12799:2000 Brazing. Non-destructive examination of brazed joints

346 BS EN 12814-1:2000 Testing of welded joints of thermoplastics semi-finished products. Bend test

347 BS EN 12814-2:2000 Testing of welded joints of thermoplastics semi-finished products. Tensile test

348 BS EN 12814-3:2000 Testing of welded joints of thermoplastics semi-finished products. Tensile creep test

349 BS EN 12814-4:2001 Testing of welded joints of thermoplastics semi-finished products. Peel test

Page 13/36
No Standard Number Description

350 BS EN 12814-5:2000 Testing of welded joints of thermoplastics semi-finished products. Macroscopic examination

351 BS EN 12814-6:2000 Testing of welded joints of thermoplastics semi-finished products. Low temperature tensile test

352 BS EN 12814-7:2002 Testing of welded joints of thermoplastics semi-finished products. Tensile test with waisted test specimens

353 BS EN 12814-8:2001 Testing of welded joints of thermoplastics semi-finished products. Requirements

354 BS EN 1289:1998 Non-destructive examination of welds. Penetrant testing of welds. Acceptance levels

355 BS EN 1290:1998 Non-destructive examination of welds. Magnetic particle examination of welds

356 BS EN 1291:1998 Non-destructive examination of welds. Magnetic particle testing of welds. Acceptance levels

357 BS EN 13018:2001 Non-destructive testing. Visual testing. General principles

Non-destructive testing. Radioscopic testing. General principles of radioscopic testing of metallic materials by X- and gamma
358 BS EN 13068-3:2001
rays

Non-destructive testing. Radioscopic testing. General principles of radioscopic testing of metallic materials by X- and gamma
359 BS EN 13068-3:2001
rays

360 BS EN 13100-1:2000 Non destructive testing of welded joints of thermoplastics semi-finished products. Visual examination

361 BS EN 13139:2002 Aggregates for mortar

362 BS EN 1320:1997 Destructive tests on welds in metallic materials. Fracture tests

363 BS EN 1321:1997 Destructive test on welds in metallic materials. Macroscopic and microscopic examination of welds

364 BS EN 13554:2002 Non-destructive testing. Acoustic emission. General principles

365 BS EN 13622:2002 Gas welding equipment. Terminology. Terms used for gas welding equipment

Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinylchloride) (PVC-U).
366 BS EN 1401-1:1998
Specifications for pipes, fittings and the system

Welding personnel. Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized
367 BS EN 1418:1998
and automatic welding of metallic materials

368 BS EN 14324 BS EN 14324. Brazing. Guidelines on the application of brazed joints

369 BS EN 1435:1997 Non-destructive examination of welds. Radiographic examination of welded joints

370 BS EN 1597-3:1997 Welding consumables. Test methods. Testing of positional capability of welding consumables in a fillet weld

Health and safety in welding and allied processes. Transparent welding curtains, strips and screens for arc welding
371 BS EN 1598:1998
processes

372 BS EN 1599:1997 Welding consumables. Covered electrodes for manual metal arc welding of creep-resisting steels. Classification

373 BS EN 1600:1997 Welding consumables. Covered electrodes for manual metal arc welding of stainless and heat resisting steels. Classification

374 BS EN 1711:2000 Non-destructive examination of welds. Eddy current examination of welds by complex plane analysis

375 BS EN 1712:1997 Non-destructive examination of welds. Ultrasonic examination of welded joints. Acceptance levels

376 BS EN 1713:1998 Non-destructive examination of welds. Ultrasonic examination. Characterization of indications in welds

Page 14/36
No Standard Number Description

377 BS EN 1714:1998 Non destructive examination of welded joints. Ultrasonic examination of welded joints

378 BS EN 1824:1998 Road marking materials. Road trials

379 BS EN 1871:2000 Road marking materials. Physical properties

380 BS EN 1916:2002 Concrete pipes and fittings, unreinforced, steel fibre and reinforced

381 BS EN 1917:2002 Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced

382 BS EN 1928:2000 Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of watertightness

383 BS EN 196-1:1995 Methods of testing cement. Determination of strength

384 BS EN 197-1:2000 Cement. Composition, specifications and conformity criteria for common cements

385 BS EN 197-2:2000 Cement. Conformity evaluation

386 BS EN 206-1:2000 Concrete. Specification, performance, production and conformity

387 BS EN 20898-2:1994, ISO 898-2:1992 Mechanical properties of fasteners. Nuts with specified proof load values. Coarse thread

Mechanical properties of fasteners. Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm
388 BS EN 20898-7:1995, ISO 898-7:1992
to 10 mm

389 BS EN 25817:1992, ISO 5817:1992 Arc-welded joints in steel. Guidance on quality levels for imperfections

390 BS EN 26848:1991, ISO 6848:1984 Specification for tungsten electrodes for inert gas shielded arc welding and for plasma cutting and welding

391 BS EN 27286:1992, ISO 7286:1986 Graphical symbols for resistance welding equipment

392 BS EN 27963:1992, ISO 7963:1985 Specification for calibration block No. 2 for ultrasonic examination of welds

393 BS EN 287-1:1992 Approval testing of welders for fusion welding. Steels

394 BS EN 287-2:1992 Approval testing of welders for fusion welding. Aluminium and aluminium alloys

395 BS EN 288-1:1992 Specification and approval of welding procedures for metallic materials. General rules for fusion welding

396 BS EN 288-2:1992 Specification and approval of welding procedures for metallic materials. Welding procedures specification for arc welding

397 BS EN 288-3:1992 Specification and approval of welding procedures for metallic materials. Welding procedure tests for the arc welding of steels

Specification and approval of welding procedures for metallic materials. Welding procedure tests for the arc welding of
398 BS EN 288-4:1992
aluminium and its alloys

Specification and approval of welding procedures for metallic materials. Approval by using approved welding consumables
399 BS EN 288-5:1995
for arc welding

400 BS EN 288-6:1995 Specification and approval of welding procedures for metallic materials. Approval related to previous experience

Specification and approval of welding procedures for metallic materials. Approval by a standard welding procedure for arc
401 BS EN 288-7:1995
welding

402 BS EN 288-8:1995 Specification and approval of welding procedures for metallic materials. Approval by a pre-production welding test

Specification and approval of welding procedures for metallic materials. Welding procedure test for pipeline welding on land
403 BS EN 288-9:1999
and offshore site butt welding of transmission pipelines

Page 15/36
No Standard Number Description

404 BS EN 295-1:1991 Vitrified clay pipes and fittings and pipe joints for drains and sewers. Requirements

405 BS EN 295-2:1991 Vitrified clay pipes and fittings and pipe joints for drains and sewers. Quality control and sampling

406 BS EN 295-3:1991 Vitrified clay pipes and fittings and pipe joints for drains and sewers. Test methods

Vitrified clay pipes and fittings and pipe joints for drains and sewers. Requirements for special fittings, adaptors and
407 BS EN 295-4:1995
compatible accessories

Vitrified clay pipes and fittings and pipe joints for drains and sewers. Requirements for perforated vitrified clay pipes and
408 BS EN 295-5:1994
fittings

409 BS EN 295-6:1996 Vitrified clay pipes and fittings and pipe joints for drains and sewers. Requirements for vitrified clay manholes

Vitrified clay pipes and fittings and pipe joints for drains and sewers. Requirements for vitrified clay pipes and joints for pipe
410 BS EN 295-7:1996
jacking

Specification for metal-arc welding with covered electrode, gas-shielded metal-arc welding and gas welding. Joint
411 BS EN 29692:1994, ISO 9692:1992
preparations for steel

Aerospace series. Rivets, solid, 100° countersunk normal head, in corrosion resisting steel FE-PA11, passivated, inch based
412 BS EN 3139:2001
series

413 BS EN 3643:1997 Rivets, solid, 100° countersunk normal head, in titanium TI-PO2, anodized, inch based series

414 BS EN 439:1994 Welding consumables. Shielding gases for arc welding and cutting

Welding consumables. Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels.
415 BS EN 440:1995
Classification

416 BS EN 444:1994 Non-destructive testing. General principles for radiographic examination of metallic materials by X- and gamma-rays

417 BS EN 444:1994 Non-destructive testing. General principles for radiographic examination of metallic materials by X- and gamma-rays

418 BS EN 444:1994 Non-destructive testing. General principles for radiographic examination of metallic materials by X- and gamma-rays

Preinsulated bonded pipe systems for underground hot water networks. Fittings assemblies of steel service pipes,
419 BS EN 448:1995
polyurethane thermal insulation and outer casing of high density polyethylene

420 BS EN 473:2000 Non-destructive testing. Qualification and certification of NDT personnel. General principles

421 BS EN 473:2000 Non-destructive testing. Qualification and certification of NDT personnel. General principles

422 BS EN 480-1:1998 Admixtures for concrete, mortar and grout. Test methods. Reference concrete and reference mortar for testing

423 BS EN 480-10:1997 Admixtures for concrete, mortar and grout. Test methods. Determination of water soluble chloride content

424 BS EN 480-11:1999 Admixtures for concrete, mortar and grout. Test methods. Determination of air void characteristics in hardened concrete

425 BS EN 480-12:1998 Admixtures for concrete, mortar and grout. Test methods. Determination of the alkali content of admixtures

426 BS EN 480-13:2002 Admixtures for concrete, mortar and grout. Test methods. Reference masonry mortar for testing mortar admixtures

427 BS EN 480-2:1997 Admixtures for concrete, mortar and grout. Test methods. Determination of setting time

428 BS EN 480-4:1997 Admixtures for concrete, mortar and grout. Test methods. Determination of bleeding of concrete

429 BS EN 480-5:1997 Admixtures for concrete, mortar and grout. Test methods. Determination of capillary absorption

430 BS EN 480-6:1997 Admixtures for concrete, mortar and grout. Test methods. Infrared analysis

Page 16/36
No Standard Number Description

431 BS EN 480-8:1997 Admixtures for concrete, mortar and grout. Test methods. Determination of the conventional dry material content

Preinsulated bonded pipe systems for underground hot water networks. Joint assembly for steel service pipes, polyurethane
432 BS EN 489:1995
thermal insulation and outer casing of polyethylene

433 BS EN 499:1995 Welding consumables. Covered electrodes for manual metal arc welding of non alloy and fine grain steels. Classification

434 BS EN 571-1:1997 Non-destructive testing. Penetrant testing. General principles

435 BS EN 571-1:1997 Non-destructive testing. Penetrant testing. General principles

436 BS EN 583-1:1999 Non-destructive testing. Ultrasonic examination. General principles

BS EN 60617-10:1996, IEC 60617-

437 Graphical symbols for diagrams. Telecommunications. Transmission
10:1996

BS EN 60617-11:1997, IEC 60617-

438 Graphical symbols for diagrams. Architectural and topographical installation plans and diagrams
11:1996

BS EN 60617-12:1999, IEC 60617-

439 Graphical symbols for diagrams. Binary logic elements
12:1997

BS EN 60617-13:1993, IEC 60617-

440 Graphical symbols for diagrams. Analogue elements
13:1993

BS EN 60617-2:1996, IEC 60617-

441 Graphical symbols for diagrams. Symbol elements, qualifying symbols and other symbols having general application
2:1996

BS EN 60617-3:1996, IEC 60617-

442 Graphical symbols for diagrams. Conductors and connecting devices
3:1996

BS EN 60617-4:1996, IEC 60617-

443 Graphical symbols for diagrams. Basic passive components
4:1996

BS EN 60617-5:1996, IEC 60617-

444 Graphical symbols for diagrams. Semiconductors and electron tubes
5:1996

BS EN 60617-6:1996, IEC 60617-

445 Graphical symbols for diagrams. Production and conversion of electrical energy
6:1996

BS EN 60617-7:1996, IEC 60617-

446 Graphical symbols for diagrams. Switchgear, controlgear and protective devices
7:1996

BS EN 60617-8:1996, IEC 60617-

447 Graphical symbols for diagrams. Measuring instruments, lamps and signalling devices
8:1996

BS EN 60617-9:1996, IEC 60617-

448 Graphical symbols for diagrams. Telecommunications. Switching and peripheral equipment
9:1996

Insulating and sheathing materials of electric cables. Common test methods. General application. Measurement of thickness
449 BS EN 60811-1-1:1995
and overall dimensions. Tests for determining the mechanical properties

BS EN 60811-1-2:1995, IEC 60811-1-

450 Insulating and sheathing materials of electric cables. Common test methods. General application. Thermal ageing methods
2:1985

Insulating and sheathing materials of electric cables. Common test methods. General application. Methods for determining
451 BS EN 60811-1-3:1995
the density. Water absorption tests. Shrinkage test

BS EN 60811-1-4:1995, IEC 60811-1-

452 Insulating and sheathing materials of electric cables. Common test methods. General application. Tests at low temperature
4:1985

BS EN 60811-2-1:1998, IEC 60811-2- Insulating and sheathing materials of electric cables. Common test methods. Methods specific to elastomeric compounds.
453
1:1998 Methods specific to elastomeric compounds. Ozone resistance, hot set and mineral oil immersion tests

BS EN 60811-3-1:1995, IEC 60811-3- Insulating and sheathing materials of electric cables. Common test methods. Methods specific to PVC compounds. Pressure
454
1:1985 test at high temperature. Tests for resistance to cracking

BS EN 60811-3-2:1995, IEC 60811-3- Insulating and sheathing materials of electric cables. Common test methods. Methods specific to PVC compounds. Loss of
455
2:1985 mass test. Thermal stability test.

BS EN 60811-4-1:1995, IEC 60811-4- Methods specific to polyethylene and polypropylene compounds. Resistance to environmental stress cracking. Wrapping test
456
1:1985 after thermal ageing in air. Measurement of the flow index. Carbon black and/or mineral content measurement in PE
Insulating and sheathing materials of electric cables. Common test methods. Methods specific to polyethylene and
BS EN 60811-4-2:2000, IEC 60811-4- polypropylene compounds. Tensile strength and elongation at break after pre-conditioning. Wrapping test after thermal
457
2:1990 ageing in air. Measurement of mass increase. Long-term stability test. Test method for copper-catalysed oxidative
degradation

Page 17/36
No Standard Number Description

Insulating and sheathing materials of electric cables. Common test methods. Methods specific to filling compounds. Drop
BS EN 60811-5-1:2000, IEC 60811-5-
458 point. Separation of oil. Lower temperature brittleness. Total acid number. Absence of corrosive components. Permittivity at
1:1990
23°C. D.C. resistivity at 23°C and 100°C

BS EN 60974-1:1998, IEC 60974-

459 Arc welding equipment. Welding power sources
1:1998

460 BS EN 60974-11:1996 Arc welding equipment. Electrode holders

461 BS EN 60974-12:1996 Arc welding equipment. Coupling devices for welding cables

BS EN 60974-5:2002, IEC 60974-

462 Arc welding equipment. Wire feeders
5:2002

BS EN 60974-7:2000, IEC 60974-

463 Arc welding equipment. Torches
7:2000

464 BS EN 681-1:1996 Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications. Vulcanized rubber

465 BS EN 681-1:1996 Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications. Vulcanized rubber

Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications. Thermoplastic
466 BS EN 681-2:2000
elastomers

Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications. Thermoplastic
467 BS EN 681-2:2000
elastomers

Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications. Cellular materials of
468 BS EN 681-3:2000
vulcanized rubber

Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications. Cast polyurethane
469 BS EN 681-4:2000
sealing elements

470 BS EN 682:2002 Elastomeric seals. Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids

471 BS EN 752-1:1996 Drain and sewer systems outside buildings. Generalities and definitions

472 BS EN 752-2:1997 Drain and sewer systems outside buildings. Performance requirements

473 BS EN 752-3:1997 Drain and sewer systems outside buildings. Planning

474 BS EN 752-4:1998 Drain and sewer systems outside buildings. Hydraulic design and environmental considerations

475 BS EN 752-5:1998 Drain and sewer systems outside buildings. Rehabilitation

476 BS EN 752-6:1998 Drain and sewer systems outside buildings. Pumping installations

477 BS EN 752-7:1998 Drain and sewer systems outside buildings. Maintenance and operations

Welding consumables. Wire electrodes and wire-flux combinations for submerged arc welding of non alloy and fine grain
478 BS EN 756:1996
steels. Classification

479 BS EN 757:1997 Welding consumables. Covered electrodes for manual metal arc welding of high strength steels. Classification

Welding consumables. Tubular cored electrodes for metal arc welding with and without a gas shield of non-alloy and fine
480 BS EN 758:1997
grain steels. Classification

481 BS EN 760:1996 Welding consumables. Fluxes for submerged arc welding. Classification

482 BS EN 818-1:1996 Short link chain for lifting purposes. Safety. General conditions of acceptance

483 BS EN 818-2:1997 Short link chain for lifting purposes. Safety. Medium tolerance chain for chain slings. Grade 8

484 BS EN 818-3:1999 Short link chain for lifting purposes. Safety. Medium tolerance chain for chain slings. Grade 4

Page 18/36
No Standard Number Description

485 BS EN 818-4:1997 Short link chain for lifting purposes. Safety. Chain slings. Grade 8

486 BS EN 818-5:1999 Short link chain for lifting purposes. Safety. Chain slings. Grade 4

Short link chain for lifting purposes. Safety. Chain slings. Specification for information for use and maintenance to be
487 BS EN 818-6:2000
provided by the manufacturer

488 BS EN 818-7:2002 Short link chain for lifting purposes. Safety. Fine tolerance hoist chain, Grade T (Types T, DAT and DT)

489 BS EN 875:1995 Destructive tests on welds in metallic materials. Impact tests. Test specimen location, notch orientation and examination

490 BS EN 876:1995 Destructive tests on welds in metallic materials. Longitudinal tensile test on weld metal in fusion welded joints

491 BS EN 895:1995 Destructive tests on welds in metallic materials. Transverse tensile test

492 BS EN 910:1996 Destructive tests on welds in metallic materials. Bend tests

493 BS EN 932-1 Tests for general properties of aggregates. Part 1. Methods for sampling.

BS EN 932-2 Tests for general properties of aggregates. Part 2. Methods for reducing laboratory samples.

BS EN 932-5 Tests for general properties of aggregates. Part 5. Common equipment and calibration.

BS EN 932-6 Tests for general properties of aggregates. Part 6. Definitions of repeatability and reproductibility.

493 BS EN 934-2:2001 Admixtures for concrete, mortar and grout. Concrete admixtures. Definitions, requirements, conformity, marking and labelling

Admixtures for concrete, mortar and grout. Admixtures for prestressing tendons. Definitions, requirements, conformity,
494 BS EN 934-4:2001
marking and labelling

495 BS EN 934-6:2001 Admixtures for concrete, mortar and grout. Sampling, conformity control and evaluation of conformity

496 BS EN 970:1997 Non-destructive examination of fusion welds. Visual examination

BS EN 1744-1 Tests for chemical properties of aggregates. Part 1: chemical analisis.

BS EN 1744-3 Tests for chemical properties of aggregates. Part 2: Preparation of eluates by leaching of aggregates.

497 BS EN ISO 11091:1999 Construction drawings. Landscape drawing practice

498 BS EN ISO 128-20:2001 Technical drawings. General principles of presentation. Basic conventions for lines

499 BS EN ISO 128-21:2001 Technical drawings. General principles of presentation. Preparation of lines by CAD systems

500 BS EN ISO 12944-3:1998 Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Design considerations

501 BS EN ISO 13918:1998 Welding. Studs and ceramic ferrules for arc stud welding

502 BS EN ISO 14001:1996 Environmental management systems. Specification with guidance for use

Welding consumables. Determination of moisture resistance of manual metal arc welding electrodes by measurement of
503 BS EN ISO 14372:2001
diffusible hydrogen

504 BS EN ISO 14555:1998 Welding. Arc stud welding of metallic materials

505 BS EN ISO 1461:1999 Hot dip galvanized coatings on fabricated iron and steel articles. Specifications and test methods

Page 19/36
No Standard Number Description

Health and safety in welding and allied processes. Laboratory method for sampling fume and gases generated by arc
506 BS EN ISO 15011-1:2002
welding. Determination of emission rate and sampling for analysis of particulate fume

507 BS EN ISO 15618-1:2002 Qualification testing of welders for under-water welding. Diver-welders for hyperbaric wet welding

508 BS EN ISO 15618-2:2002 Qualification testing of welders for under-water welding. Diver-welders and welding operators for hyperbaric dry welding

BS EN ISO 1660:1996, BS 308-

509 Technical drawings. Dimensioning and tolerancing of profiles
2.3:1995

510 BS EN ISO 19011:2002 Guidelines for quality and/or environmental management systems auditing

Paints and varnishes. Corrosion protection of steel structures by protective paint systems. Measurement and acceptance
511 BS EN ISO 19840
criteria for the dry film thickness

512 BS EN ISO 2320:1998 Prevailing torque type steel hexagon nuts. Mechanical and performance requirements

513 BS EN ISO 3766:1999 Construction drawings. Simplified representation of concrete reinforcement

514 BS EN ISO 3766:1999 Construction drawings. Simplified representation of concrete reinforcement

515 BS EN ISO 4014:2001 Hexagon head bolts. Product grades A and B

516 BS EN ISO 4066:2000 Construction drawings. Bar scheduling

517 BS EN ISO 4157-1:1999 Construction drawings. Designation systems. Buildings and parts of buildings

518 BS EN ISO 4157-2:1999 Construction drawings. Designation systems. Room names and numbers

519 BS EN ISO 4157-3:1999 Construction drawings. Designation systems. Room identifiers

520 BS EN ISO 4172:1997 Technical drawings. Construction drawings. Drawings for the assembly of prefabricated structures

521 BS EN ISO 5261:1999 Technical drawings. Simplified representation of bars and profile sections

522 BS EN ISO 536:1997 Paper and board. Determination of grammage

523 BS EN ISO 5456-1:1999 Technical drawings. Projection methods. Synopsis

524 BS EN ISO 5456-2:1999 Technical drawings. Projection methods. Orthographic representations

525 BS EN ISO 5456-3:1999 Technical drawings. Projection methods. Axonometric representations

526 BS EN ISO 5457:1999 Technical product documentation. Sizes and layout of drawing sheets

527 BS EN ISO 6284:1999 Construction drawings. Indication of limit deviations

BS EN ISO 6412-1:1995, BS 308-

528 Technical drawings. Simplified representation of pipelines. General rules and orthogonal representation
4.6:1995

BS EN ISO 6412-2:1995, BS 308-

529 Technical drawings. Simplified representation of pipelines. Isometric projection
4.7:1995

BS EN ISO 6412-3:1996, BS 308-

530 Technical drawings. Simplified representation of pipelines. Terminal features of ventilation and drainage systems
4.8:1996

BS EN ISO 6413:1995, BS 308-

531 Technical drawings. Representation of splines and serrations
1.9:1995

532 BS EN ISO 6414:1995 Technical drawings for glassware

Page 20/36
No Standard Number Description

BS EN ISO 6433:1995, BS 308-

533 Technical drawings. Item references
1.8:1995

534 BS EN ISO 6506-2:1999 Metallic materials. Brinell hardness test. Verification and calibration of Brinell hardness testing machines

535 BS EN ISO 6507-2:1998 Metallic materials. Vickers hardness test. Verification of testing machines

Metallic materials. Rockwell hardness test. Verification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K,
536 BS EN ISO 6508-2:1999
N, T)

537 BS EN ISO 7042:1998 Prevailing torque type all-metal hexagon nuts. Property classes 5, 8, 10 and 12

Technical drawings. Construction drawings. General rules for execution of production drawings for prefabricated structural
538 BS EN ISO 7437:1996
components

539 BS EN ISO 7518:1999 Construction drawings. Simplified representation of demolition and rebuilding

Technical drawings. Construction drawings. General principles of presentation for general arrangement and assembly
540 BS EN ISO 7519:1997
drawings

541 BS EN ISO 7719:1998 Prevailing torque type all-metal hexagon nuts, style 1. Property classes 5, 8 and 10

542 BS EN ISO 8099:2001 Small craft. Toilet waste retention systems

543 BS EN ISO 8560:1999 Construction drawings. Representation of modular sizes, lines and grids

BS EN ISO 8596:1996, BS 4274-

544 Visual acuity test types. Specification for Landolt ring optotype for non-clinical purposes
2:1996

BS EN ISO 8597:1996, BS 4274-

545 Visual acuity test types. Method for correlating optotypes used for non-clinical purposes
3:1996

546 BS EN ISO 898-1:1999 Mechanical properties of fasteners made of carbon steel and alloy steel. Bolts, screws and studs

Mechanical properties of fasteners made of carbon steel and alloy steel. Set screws and similar threaded fasteners not
547 BS EN ISO 898-5:1999
under tensile stresses

548 BS EN ISO 898-6:1996 Mechanical properties of fasteners. Nuts with specified proof load values. Fine pitch thread

549 BS EN ISO 9000:2000 Quality management systems. Fundamentals and vocabulary

550 BS EN ISO 9001:2000 Quality management systems. Requirements

551 BS EN ISO 9004:2000 Quality management systems. Guidelines for performance improvements

552 BS EN ISO 9431:1999 Construction drawings. Spaces for drawing and for text, and title blocks on drawing sheets

553 BS EN ISO 9606 BS EN ISO 9606-1. Approval testing of welders. Fusion welding. Part 1. Steel

554 BS EN ISO 9606-3:1999 Approval testing of welders. Fusion welding. Copper and copper alloys

555 BS EN ISO 9606-4:1999 Approval testing of welders. Fusion welding. Nickel and nickel alloys

556 BS EN ISO 9606-5:2000 Approval testing of welders. Fusion welding. Titanium and titanium alloys, zirconium and zirconium alloys

557 BS EN ISO 9692-2:1998 Welding and allied processes. Joint preparation. Submerged arc welding of steels

558 BS EN ISO 9934-1:2001 Non-destructive testing. Magnetic particle testing. General principles

559 BS EN ISO 9934-1:2001 Non-destructive testing. Magnetic particle testing. General principles

Page 21/36
No Standard Number Description

560 BS EN ISO 17025 :2000 General Requirements for the competence of testing and calibration laboratories

561 BS ISO 128:1982 Technical drawings. General principles of presentation

Technical drawings. General principles of presentation. Basic conventions and applications for leader lines and reference
562 BS ISO 128-22:1999
lines

563 BS ISO 128-23:1999 Technical drawings. General principles of presentation. Lines on construction drawings

564 BS ISO 128-24:1999 Technical drawings. General principles of presentation. Lines on mechanical engineering drawings

565 BS ISO 128-25:1999 Technical drawings. General principles of presentation. Lines on shipbuilding drawings

566 BS ISO 128-30:2001 Technical drawings. General principles of presentation. Basic conventions for views

567 BS ISO 128-34:2001 Technical drawings. General principles of presentation. Views on mechanical engineering drawings

568 BS ISO 128-40:2001 Technical drawings. General principles of presentation. Basic conventions for cuts and sections

569 BS ISO 128-44:2001 Technical drawings. General principles of presentation. Sections on mechanical engineering drawings

570 BS ISO 128-50:2001 Technical drawings. General principles of presentation. Basic conventions for representing areas on cuts and sections

571 BS ISO 5456-4:1996 Technical drawings. Projection methods. Central projection

Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels. Metric series. Specifications. Fittings for
572 BS ISO 8085-1:2001
socket fusion using heated tools

Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels. Metric series. Specifications. Spigot
573 BS ISO 8085-2:2001
fittings for butt fusion, for socket fusion using heated tools and for use with eletrofusion fittings

Information technology. Computer graphics. Interfacing techniques for dialogues with graphical devices (CGI). Functional
574 BS ISO/IEC 9636-1:1991
specification. Overview, profiles, and conformance

Information technology. Computer graphics. Interfacing techniques for dialogues with graphical devices (CGI). Functional
575 BS ISO/IEC 9636-2:1991
specification. Control

Information technology. Computer graphics. Interfacing techniques for dialogues with graphical devices (CGI). Functional
576 BS ISO/IEC 9636-3:1991
specification. Output

Information technology. Computer graphics. Interfacing techniques for dialogues with graphical devices (CGI). Functional
577 BS ISO/IEC 9636-4:1991
specification. Segments

Information technology. Computer graphics. Interfacing techniques for dialogues with graphical devices (CGI). Functional
578 BS ISO/IEC 9636-5:1991
specification. Input and echoing

Information technology. Computer graphics. Interfacing techniques for dialogues with graphical devices (CGI). Functional
579 BS ISO/IEC 9636-6:1991
specification. Raster

Information technology. Computer graphics. Interfacing techniques for dialogues with graphical devices (CGI). Language
580 BS ISO/IEC 9638-3:1994
bindings. Ada

581 DD CLC/TS 62081:2002 Arc welding equipment. Installation and use

582 EN 13067 prEN 13067. Plastics welding personnel. Approval testing of welders. Thermoplastics welded assemblies

EN 13598-1. Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl
583 EN 13598-1
chloride) (PVC-U), polypropylene (PP) and polyethylene (PE). Part 1. Specifications for ancillary fittings (prEN 13598-1)

584 OHSAS 18001:1999 Occupational health and safety management systems. Specification

585 OHSAS 18002:2000 Occupational health and safety management systems. Guidelines for the implementation of OHSAS 18001

586 PD 6472:1974 Guide to specifying the quality of building mortars

Page 22/36
No Standard Number Description

587 BS EN 20811:1992, ISO 811:1981 Textiles. Determination of resistance to water penetration. Hydrostatic pressure test

588 BS 4515-2:1999 Specification for welding of steel pipelines on land and offshore. Duplex stainless steel pipelines

589 BS 4515-1:2000 Specification for welding of steel pipelines on land and offshore. Carbon and carbon manganese steel pipelines

590 BS 2494:1990 Specification for elastomeric seals for joints in pipework and pipelines

591 BS 7874:1998 Method of test for microbiological deterioration of elastomeric seals for joints in pipework and pipelines

592 BS EN 682:2002 Elastomeric seals. Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids

Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications. Thermoplastic
593 BS EN 681-2:2000
elastomers

594 BS EN 681-1:1996 Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications. Vulcanized rubber

595 BS EN 497:1998 Specification for dedicated liquefied petroleum gas appliances. Multi-purpose boiling burners for outdoor use

596 BS EN 124:1994 Gully tops and manhole tops for vehicular and pedestrian areas. Design requirements, type testing, marking, quality control

597 BS EN 10204:1991 Metallic products. Types of inspection documents

598 BS 534:1990 Specification for steel pipes, joints and specials for water and sewage

599 BS 7350:1990 Specification for double regulating globe valves and flow measurement devices for heating and chilled water systems

600 BS EN 10025:1993 Hot rolled products of non-alloy structural steels. Technical delivery conditions

601 BS EN ISO14689-1:2003 Geotechnical Investigation and Testing. Identification and Classification of rock.Identification and description

Petroleum and natural gas industries. Specific requirements for offshore structure. Geotechnical and foundation design
602 BS EN ISO 19901-4:2003
considerations

603 BS EN 1538:2000 Execution of special geotechnical works. Diaphragm walls

604 DD ENV 1997-1:1995 Eurocode 7. Geotechnical design. General rules (together with United Kingdom National Application Document)

605 DD ENV 1997-2:2000 Eurocode 7. Geothechnical design. Design assisted by laboratory tesing

606 DD ENV 1997-3:2000 Eurocode 7. Geothechnical design. Design assisted by fieldtesting

Eurocode 8. Design provisions for earthquake resistance of structures. Foundations, retaining structures and geothechnical
607 DD ENV 1998-5:1996
aspects

608 BS EN 12716:2001 Execution of special geotechnical works. Jet grouting

609 01/105187 DC prEN 14199 Execution of special geotechnical works. Micropiles

610 02/103834 DC prEN 14475 Execution of special geotechnical works.Reinforced fill

611 02/104316 DC peEN 14490. Execution of special geotechnical works.Soil nailing

612 03/303958 DC EN 14679. Execution of special geotechnical works. Deep mixing.

613 03/308533 DC EN 14731. Execution of special geotechnical works. Group treatment by deep vibration.

Page 23/36
Problem

Page 24/36
 Documents in SK General:

1 BS 1247-1:1990

2 BS 1247-2:1990

3 BS 1247-3:1991

4 BS 1377-1:1990

5 BS 1377-2:1990

6 BS 1377-3:1990

7 BS 1377-4:1990

8 BS 1377-5:1990

9 BS 1377-6:1990

10 BS 1377-7:1990

11 BS 1377-8:1990

12 BS 1377-9:1990

13 BS 1881-101:1983

14 BS 1881-102:1983

15 BS 1881-103:1993

16 BS 1881-104:1983

17 BS 1881-105:1984

18 BS 1881-106:1983

19 BS 1881-107:1983

20 BS 1881-108:1983

21 BS 1881-109:1983
22 BS 1881-110:1983

23 BS 1881-111:1983

24 BS 1881-112:1983

25 BS 1881-113:1983

26 BS 1881-114:1983

27 BS 1881-115:1986

28 BS 1881-116:1983

29 BS 1881-117:1983

30 BS 1881-118:1983

31 BS 1881-119:1983

32 BS 1881-121:1983

33 BS 1881-122:1983

34 BS 1881-124:1988

35 BS 1881-125:1986

36 BS 1881-127:1990

37 BS 1881-128:1997

38 BS 1881-129:1992

39 BS 1881-130:1996

40 BS 1881-131:1998

41 BS 1881-201:1986

42 BS 1881-203:1986

43 BS 1881-204:1988

44 BS 1881-205:1986
45 BS 1881-206:1986

46 BS 1881-207:1992

47 BS 1881-208:1996

48 BS 1881-209:1990

49 BS 1881-5:1970

50 BS 4190:2001

51 BS 4320:1968

52 BS 4395-1:1969

53 BS 4395-2:1969

54 BS 4504-3.3:1989

55 BS 4871-3:1985

56 BS 5114:1975

57 BS 5163:1986

58 BS 5212-1:1990

59 BS 5212-2:1990

60 BS 5212-3:1990

61 BS 5911-1:2002

62 BS 5911-100:1988

63 BS 5911-103:1994

64 BS 5911-110:1992

65 BS 5911-114:1992

66 BS 5911-120:1989

67 BS 5911-2:1982
68 BS 5911-200:1994

69 BS 5911-230:1994

70 BS 5911-3:2002

71 BS 5911-4:2002

72 BS 5950-1:2000

73 BS 5950-2:2001

74 BS 5950-3.1:1990

75 BS 5950-4:1994

76 BS 5950-5:1998

77 BS 5950-6:1995

78 BS 5950-7:1992

79 BS 5950-9:1994

80 BS 5955-6:1980

81 BS 5955-8:2001

82 BS 6076:1996

83 BS 6572:1985

84 BS 8110-1:1997

85 BS 8110-2:1985

86 BS 8110-3:1985

87 BS 8666:2000

88 BS EN 10025:1993

89 BS EN 10113-2:1993

90 BS EN 10113-3:1993
91 BS EN 124:1994

92 BS EN 20898-2:1994

93 BS EN 20898-7:1995

94 BS EN 295-1:1991

95 BS EN 295-2:1991

96 BS EN 295-3:1991

97 BS EN 295-4:1995

98 BS EN 295-5:1994

99 BS EN 295-6:1996

100 BS EN 295-7:1996

101 BS EN 473:2000

102 BS EN 681-1:1996

103 BS EN 681-2:2000

104 BS EN 681-3:2000

105 BS EN 681-4:2000

106 BS EN 682:2002

107 BS EN 818-1:1996

108 BS EN 818-2:1997

109 BS EN 818-3:1999

110 BS EN 818-4:1997

111 BS EN 818-5:1999

112 BS EN 818-6:2000

113 BS EN 818-7:2002
114 BS EN ISO 14001:1996

115 BS EN ISO 1461:1999

116 BS EN ISO 19011:2002

117 BS EN ISO 4066:2000

118 BS EN ISO 898-1:1999

119 BS EN ISO 898-5:1999

120 BS EN ISO 898-6:1996

121 BS EN ISO 9000:2000

122 BS EN ISO 9001:2000

123 BS EN ISO 9004:2000

124 OHSAS 18001:1999

125 OHSAS 18002:2000

in SK General:

Manhole steps. Specification for galvanized ferrous or stainless steel manhole steps

Manhole steps. Specification for plastics encapsulated manhole steps

Manhole steps. Specification for aluminium manhole steps

Methods of test for soils for civil engineering purposes. General requirements and sample
preparation
Methods of test for soils for civil engineering purposes. Classification tests

Methods of test for soils for civil engineering purposes. Chemical and electro-chemical
tests
Methods of test for soils for civil engineering purposes. Compaction-related tests

Methods of test for soils for civil engineering purposes. Compressibility, permeability and
durability tests
Methods of test for soils for civil engineering purposes. Consolidation and permeability
tests in hydraulic cells and with pore pressure measurement
Methods of test for soils for civil engineering purposes. Shear strength tests (total stress)

Methods of test for soils for civil engineering purposes. Shear strength tests (effective
stress)
Methods of test for soils for civil engineering purposes. In-situ tests

Testing concrete. Method of sampling fresh concrete on site

Testing concrete. Method for determination of slump

Testing concrete. Method for determination of compacting factor

Testing concrete. Method for determination of Vebe time

Testing concrete. Method for determination of flow

Testing concrete. Methods for determination of air content of fresh concrete

Testing concrete. Method for determination of density of compacted fresh concrete

Testing concrete. Method for making test cubes from fresh concrete

Testing concrete. Method for making test beams from fresh concrete
Testing concrete. Method for making test cylinders from fresh concrete

Testing concrete. Method of normal curing of test specimens (20°C method)

Testing concrete. Methods of accelerated curing of test cubes

Testing concrete. Method for making and curing no-fines test cubes

Testing concrete. Methods for determination of density of hardened concrete

Testing concrete. Specification for compression testing machines for concrete

Testing concrete. Method for determination of compressive strength of concrete cubes

Testing concrete. Method for determination of tensile splitting strength

Testing concrete. Method for determination of flexural strength

Testing concrete. Method for determination of compressive strength using portions of

beams broken in flexure (equivalent cube method)
Testing concrete. Method for determination of static modulus of elasticity in compression

Testing concrete. Method for determination of water absorption

Testing concrete. Methods for analysis of hardened concrete

Testing concrete. Methods for mixing and sampling fresh concrete in the laboratory

Testing concrete. Method of verifying the performance of a concrete cube compression

machine using the comparative cube test
Testing concrete. Methods for analysis of fresh concrete

Testing concrete. Method for determination of density of partially compacted semi-dry

fresh concrete
Testing concrete. Method for temperature-matched curing of concrete specimens

Testing concrete. Methods for testing cement in a reference concrete

Testing concrete. Guide to the use of non-destructive methods of test for hardened
concrete
Testing concrete. Recommendations for measurement of velocity of ultrasonic pulses in
concrete
Testing concrete. Recommendations on the use of electromagnetic covermeters

Testing concrete. Recommendations for radiography of concrete

Testing concrete. Recommendations for determination of strain in concrete

Testing concrete. Recommendations for the assessment of concrete strength by near-to-

surface tests
Testing concrete. Recommendations for the determination of the initial surface absorption
of concrete
Testing concrete. Recommendations for the measurement of dynamic modulus of
elasticity
Testing concrete. Methods of testing hardened concrete for other than strength

ISO metric black hexagon bolts, screws and nuts. Specification

Specification for metal washers for general engineering purposes. Metric series

Specification for high strength friction grip bolts and associated nuts and washers for
structural engineering. General grade
Specification for high strength friction grip bolts and associated nuts and washers for
structural engineering. Higher grade bolts and nuts and general grade washers
Circular flanges for pipes, valves and fittings (PN designated). Specification for copper
alloy and composite flanges
Specification for approval testing of welders working to approved welding procedures. Arc
welding of tube to tube-plate joints in metallic materials
Specification for performance requirements for joints and compression fittings for use with
polyethylene pipes
Specification for predominantly key-operated cast iron gate valves for waterworks
purposes
Cold applied joint sealant systems for concrete pavements. Specification for joint sealants

Cold applied joint sealant systems for concrete pavements. Code of practice for the
application and use of joint sealants
Cold applied joint sealant systems for concrete pavements. Methods of test

Precast concrete pipes, fittings and ancillary products. Specification for unreinforced and
reinforced concrete pipes (including jacking pipes) and fittings with flexible joints
(complementary to BS EN 1916:2002)
Precast concrete pipes, fittings and ancillary products. Specification for unreinforced and
reinforced pipes and fittings with flexible joints
Precast concrete pipes, fittings and ancillary products. Specification for prestressed non-
pressure pipes and fittings with flexible joints
Precast concrete pipes, fittings and ancillary products. Specification for ogee pipes and
fittings (including perforated)
Precast concrete pipes, fittings and ancillary products. Specification for porous pipes

Precast concrete pipes, fittings and ancillary products. Specification for reinforced jacking
pipes with flexible joints
Precast concrete pipes, fittings and ancillary products. Specification for inspection
chambers
Precast concrete pipes, fittings and ancillary products. Specification for unreinforced and
reinforced manholes and soakaways of circular cross section
Precast concrete pipes, fittings and ancillary products. Specification for road gullies and
gully cover slabs
Precast concrete pipes, fittings and ancillary products. Specification for unreinforced and
reinforced concrete manholes and soakaways (complementary to BS EN 1917:2002)
Precast concrete pipes, fittings and ancillary products. Specification for unreinforced and
reinforced concrete inspection chambers (complementary to BS EN 1917:2002)
Structural use of steelwork in building. Code of practice for design. Rolled and welded
sections
Structural use of steelwork in building. Specification for materials, fabrication and
erection. Rolled and welded sections
Structural use of steelwork in building. Design in composite construction. Code of practice
for design of simple and continuous composite beams
Structural use of steelwork in building. Code of practice for design of composite slabs with
profiled steel sheeting
Structural use of steelwork in building. Code of practice for design of cold formed thin
gauge sections
Structural use of steelwork in building. Code of practice for design of light gauge profiled
steel sheeting
Structural use of steelwork in building. Specification for materials and workmanship: cold
formed sections
Structural use of steelwork in building. Code of practice for stressed skin design

Plastics pipework (thermoplastics materials). Code of practice for the installation of

unplasticized PVC pipework for gravity drains and sewers
Plastics pipework (thermoplastics materials). Specification for the installation of
thermoplastic pipes and associated fittings for use in domestic hot and cold services and
heating systems in buildings
Specification for polymeric film for use as a protective sleeving for buried iron pipes and
fittings (for site and factory application)
Specification for blue polyethylene pipes up to nominal size 63 for below ground use for
potable water
Structural use of concrete. Code of practice for design and construction

Structural use of concrete. Code of practice for special circumstances

Structural use of concrete. Design charts for singly reinforced beams, doubly reinforced
beams and rectangular columns
Specification for scheduling, dimensioning, bending and cutting of steel reinforcement for
concrete
Hot rolled products of non-alloy structural steels. Technical delivery conditions

Hot-rolled products in weldable fine grain structural steels. Delivery conditions for
normalized/normalized rolled steels
Hot-rolled products in weldable fine grain structural steels. Delivery conditions for
thermomechanical rolled steels
Gully tops and manhole tops for vehicular and pedestrian areas. Design requirements,
type testing, marking, quality control
Mechanical properties of fasteners. Nuts with specified proof load values. Coarse thread

Mechanical properties of fasteners. Torsional test and minimum torques for bolts and
screws with nominal diameters 1 mm to 10 mm
Vitrified clay pipes and fittings and pipe joints for drains and sewers. Requirements

Vitrified clay pipes and fittings and pipe joints for drains and sewers. Quality control and
sampling
Vitrified clay pipes and fittings and pipe joints for drains and sewers. Test methods

Vitrified clay pipes and fittings and pipe joints for drains and sewers. Requirements for
special fittings, adaptors and compatible accessories
Vitrified clay pipes and fittings and pipe joints for drains and sewers. Requirements for
perforated vitrified clay pipes and fittings
Vitrified clay pipes and fittings and pipe joints for drains and sewers. Requirements for
vitrified clay manholes
Vitrified clay pipes and fittings and pipe joints for drains and sewers. Requirements for
vitrified clay pipes and joints for pipe jacking
Non-destructive testing. Qualification and certification of NDT personnel. General
principles
Elastomeric seals. Material requirements for pipe joint seals used in water and drainage
applications. Vulcanized rubber
Elastomeric seals. Material requirements for pipe joint seals used in water and drainage
applications. Thermoplastic elastomers
Elastomeric seals. Material requirements for pipe joint seals used in water and drainage
applications. Cellular materials of vulcanized rubber
Elastomeric seals. Material requirements for pipe joint seals used in water and drainage
applications. Cast polyurethane sealing elements
Elastomeric seals. Materials requirements for seals used in pipes and fittings carrying gas
and hydrocarbon fluids
Short link chain for lifting purposes. Safety. General conditions of acceptance

Short link chain for lifting purposes. Safety. Medium tolerance chain for chain slings.
Grade 8
Short link chain for lifting purposes. Safety. Medium tolerance chain for chain slings.
Grade 4
Short link chain for lifting purposes. Safety. Chain slings. Grade 8

Short link chain for lifting purposes. Safety. Chain slings. Grade 4

Short link chain for lifting purposes. Safety. Chain slings. Specification for information for
use and maintenance to be provided by the manufacturer
Short link chain for lifting purposes. Safety. Fine tolerance hoist chain, Grade T (Types T,
DAT and DT)
Environmental management systems. Specification with guidance for use

Hot dip galvanized coatings on fabricated iron and steel articles. Specifications and test
methods
Guidelines for quality and/or environmental management systems auditing

Construction drawings. Bar scheduling

Mechanical properties of fasteners made of carbon steel and alloy steel. Bolts, screws
and studs
Mechanical properties of fasteners made of carbon steel and alloy steel. Set screws and
similar threaded fasteners not under tensile stresses
Mechanical properties of fasteners. Nuts with specified proof load values. Fine pitch
thread
Quality management systems. Fundamentals and vocabulary

Quality management systems. Requirements

Quality management systems. Guidelines for performance improvements

Occupational health and safety management systems. Specification

Occupational health and safety management systems. Guidelines for the implementation
of OHSAS 18001