Inverters
www.victronenergy.com
180 VA – 1200 VA 230 V/50 Hz and 110 V/60 Hz
SinusMax – Superior engineering
Developed for professional duty, this range of inverters is suitable for the widest range of
applications. The design criteria have been to produce a true sine wave inverter with optimized
efficiency but without compromise in performance. Employing hybrid HF technology, the result is a
top quality product with compact dimensions, light in weight and capable of supplying power,
problem-free, to any load.
Extra start-up power
A unique feature of the SinusMax technology is very high start-up power. Conventional high
frequency technology does not offer such extreme performance. These Inverters, however, are well
suited to power up difficult loads such as computers and low power electric tools.
Inverter 12/180
To transfer the load to another AC source: the automatic transfer switch
For our lower power models we recommend the use of our Filax Automatic Transfer Switch. The
Filax features a very short switchover time (less than 20 milliseconds) so that computers and other
electronic equipment will continue to operate without disruption.
LED diagnosis
Please see manual for a description.
Remote on/off switch
Connector for remote on/off switch available on all models.
Inverter 12/800 DIP switch for 50/60Hz selection (48/350 model only)
with Schuko socket
Available with different output sockets
Please see pictures below.
Inverter 12/350 Inverter 12/180 Inverter 12/180
with IEC-320 sockets with Schuko socket with Nema 5-15R sockets
Inverter 12/800 Inverter 12/800 Inverter 12/800 Inverter 12/800 Inverter 12/800
with IEC-320 socket with Schuko socket with BS 1363 socket with AN/NZS 3112 socket with Nema 5-15R socket
12 Volt 12/180 Discontinued 12/350 Discontinued 12/800 Discontinued 12/1200 Schuko only
Inverter 24 Volt 24/180 Discontinued 24/350 Discontinued 24/800 Discontinued 24/1200 Discontinued
48 Volt 48/350 Discontinued 48/800 IEC socket only 48/1200 Discontinued
Cont. AC power at 25 °C (VA) (3) 180 350 800 1200
Cont. power at 25 °C / 40°C (W) 175 / 150 300 / 250 700 / 650 1000 / 900
Peak power (W) 350 700 1600 2400
Output AC voltage / frequency (4) 110 VAC or 230 VAC +/- 3 % 50 Hz or 60 Hz +/- 0.1 %
Input voltage range (VDC) 10,5 - 15,5 / 21,0 - 31,0 / 42,0 - 62,0 9,2 - 17,3 / 18,4 - 34,0 / 36,8 - 68,0
Low battery alarm (VDC) 11,0 / 22 / 44 10,9 / 21,8 / 43,6
Low battery shut down (VDC) 10,5 / 21 / 42 9,2 / 18,4 / 36,8
Low battery auto recovery (VDC) 12,5 / 25 / 50 12,5 / 25 / 50
Max. efficiency (%) 87 / 88 89 / 89/ 90 91 / 93 / 94 92 / 94 / 94
Zero load power (W) 2,6 / 3,8 3,1 / 5,0 / 6,0 6/5/4 6/5/6
Zero load power in search mode n. a. n. a. 2 2
Protection (2) a-e
Operating temperature range -40 to +50 °C (fan assisted cooling)
Humidity (non-condensing) max 95 %
ENCLOSURE
Material & Colour aluminium (blue Ral 5012)
Battery-connection 1) 1) 1) 1)
230V: IEC-320 (IEC-320 plug included), CEE 7/4 (Schuko)
Standard AC outlets
120V: Nema 5-15R (12/1200 only)
Protection category IP 20
Weight (kg / lbs) 2.7 / 5.4 3.5 / 7.7 6.5 / 14.3 8.5 / 18.7
Dimensions (hxwxd in mm) 72x132x200 72x155x237 104 x 194 x 305 104 x 194 x 305
(hxwxd in inches) 2.8x5.2x7.9 2.8x6.1x9.3 4.1 x 7.6 x 12.0 4.1 x 7.6 x 12.0
ACCESSORIES
Remote on-off switch Two pole connector
Automatic transfer switch Filax
STANDARDS
Safety EN 60335-1
Emission Immunity EN 55014-1 / EN 55014-2/ EN 61000-6-2 / EN 61000-6-3
1) Battery cables of 1.5 meter (12/180 3) Non-linear load, crest factor 3:1
with cigarette plug) 4) Frequency can be set by DIP switch (48/350 model only)
2) Protection key:
a) output short circuit
b) overload
c) battery voltage too high
d) battery voltage too low
e) temperature too high
Battery Alarm BMV-700 Battery Monitor
An excessively high or low battery voltage is indicated The BMV-700 Battery Monitor features an advanced
by an audible and visual alarm, and a relay for remote microprocessor control system combined with high
signalling. resolution measuring systems for battery voltage and
charge/discharge current. Besides this, the software
includes complex calculation algorithms to exactly
determine the state of charge of the battery. The BMV-
700 selectively displays battery voltage, current,
consumed Ah or time to go. The monitor also stores a
host of data regarding performance and use of the
battery.
Victron Energy B.V. | De Paal 35 | 1351 JG Almere | The Netherlands
E-mail:
[email protected] | www.victronenergy.com
