QuickSpecs HPE ProLiant ML110 Gen11

Overview

HPE ProLiant ML110 Gen11

Provide enhanced single processor and storage flexibility in a 4.5U 1P tower optimized server with optional
rackable chassis, outstanding compute performance, security, reliability, and expandability at an affordable
price. Fill a mid-range of workloads for small offices, remote and branch offices of large enterprises, growing
SMBs and data centers with the power of 4th and 5th Gen Intel® Xeon® Scalable Processors (up to 32
cores) increased bandwidth with DDR5 and PCIe Gen5. HPE ProLiant ML110 Gen11 server is an excellent
choice to accelerate your growing business.

Front View - SFF chassis with optional Gen11 16 SFF and 8LFF Drive Cage Kits with RDX shown
(Tower mode)
1. DisplayPort 1.1a 7. Power on/Standby button and system power
LED
2. USB 3.2 Gen1 port 8. Optical drive bay
3. iLO service port 9. Media Bay: optional internal USB RDX docking
station or internal LTO tape drive
4. UID button/LED 10. Box1: 4LFF/NHP or 8SFF SAS/SATA drive cage
5. NIC status LED1 11. Box2: Optional 4LFF/NHP or 8SFF SAS/SATA
drive cage
6. Health LED

DA - 16305 Worldwide QuickSpecs — Version 26 — 4/7/2025 Page 1

QuickSpecs HPE ProLiant ML110 Gen11

Overview
Notes:
1 Front
NIC LED display doesn't support NIC LED ACT/LINK indication from ALOM/PCIE/FLOM NIC's
Image shown without the security front bezel which is standard in every ML110 Gen11 unit.

Rear View - With optional NS204i-u and riser kit shown.

1. HPE NS204i-u Gen11 NVMe Hot Plug Boot 8. iLO management port
Device (Optional)
2. Flexible Slot power supply 1 9. Dual NIC ports (1 GbE)
3. Flexible Slot power supply 2 10. Slot 1 PCIe5 x16
4. Slot 14 OCP 1 (Optional for OROC/NIC OCP 11. Slot 2 PCIe5 x16 (Optional riser kit required)
adapter)
5. Serial port (Optional) 12. Slot 3 PCIe5 x16 (Optional riser kit required)
6. VGA Port 13. Slot 4 PCIe5 x16
7. Dual USB 3.2 Gen 1 ports

DA - 16305 Worldwide QuickSpecs — Version 26 — 4/7/2025 Page 2

QuickSpecs HPE ProLiant ML110 Gen11

Overview

Internal View - with full memory DIMM populated and optional NS204i-u shown
1. CPU Socket with 16 DDR5 DIMM slots 9. USB 2.0 port
2. M.2 Slot 2 10. Slot 1 PCIe5 x16
3. M.2 Slot 1 11. MCIO port 1 for the riser slot 2
4. x8 SlimSAS port 12. MCIO port 2 for the riser slot 2
5. Megacell battery holder (Under) 13. MCIO port 3 for the riser slot 3
6. HPE NS204i-u NVMe Hot Plug Boot Device 14. MCIO port 4 for the riser slot 3
(Optional)
7. Slot 14 OCP 1 (Optional for OROC/NIC) 15. USB 3.2 Gen 1 port
8. Slot 4 PCIe5 x16

What's New
Powered by 4th Generation Intel® Xeon® Scalable processors that support up to 32 core at 185W, 60
MB of L3 Cache, and 16 DIMMs for DDR5 memory up to 4800 MT/s.
Increased memory bandwidth, performance and lower power requirements with DDR5 memory that
supports up to 1 TB memory capacity with 8 channels per processor.
Advanced data transfer rates from the PCIe Gen5 serial expansion bus.
Includes HPE Integrated Lights-Out 6 (iLO 6) server management software that enables you to
securely configure, monitor, and update your HPE ProLiant Gen11 servers seamlessly from anywhere.

DA - 16305 Worldwide QuickSpecs — Version 26 — 4/7/2025 Page 3

QuickSpecs HPE ProLiant ML110 Gen11

Overview
Supports LFF/SFF backplane and hot-pluggable RAID1 protected NS204i-u M.2 NVMe boot option.
Support NVIDIA L4 24GB PCIe Accelerator
Support 5th Generation Intel® Xeon® Scalable processors that support up to 28 cores at 185W
TDP, 2.1 G.
Support DDR5 5600 MT/s memory 16, 32, 64, 96GB DIMM modules with 5th Gen Intel® Xeon®
Scalable processors.
New pre-configured SKUs with 5th Generation Intel® Xeon® Scalable processors.
Support NVIDIA RTX 4000 Ada Graphics Accelerator.
Support HPE 24TB SAS/SATA 7.2K LFF LP HDDs.
Support internal LTO tape drive.

Platform Information
Form Factor

4.5U tower with rack conversion capability

Notes: When deployed as a Rack model, this system will take up 5.5U-height space in a standard data
center rack facility.

Chassis Types
8 SFF chassis with optional SFF drive cage kit, 1 Optical Drive, 1 USB internal RDX docking station or
internal LTO tape drive supported.
4 LFF chassis with optional LFF or SFF drive cage kit, 1 Optical Drive, 1 USB internal RDX docking
station or internal LTO tape drive supported.

Notes: Mixed SFF and LFF drive cages is supported with LFF chassis, up to 2 drive cages.

System Fans

Standard - 2 fans included with optional Redundant Fan Kit.

Notes:

When one of the following scenarios occurs, Redundant Fan Kit (P49984-B21) is required.

− Server with any following options installed:

ο SAS 15K RPM SFF HDD.
ο SAS4 SFF SSD.
ο HPE NS204i-u Gen11 NVMe Hot Plug Boot Optimized Storage Device.
ο GPU and accelerators
− Server is required to continue operating with single fan failure. A flashing amber Health LED will indicate
this condition.
− Server is required to operate with the A3/A4 extended operating environment with ambient temperature
35°C (95°F) to 45°C (113°F).

DA - 16305 Worldwide QuickSpecs — Version 26 — 4/7/2025 Page 4

QuickSpecs HPE ProLiant ML110 Gen11

Standard Features

Processors - One of the following, depending on model.

Notes: For more information regarding Intel Xeon processors, please see the following

https://www.intel.sg/content/www/xa/en/processors/xeon/scalable/xeon-scalable-platform.html.

Intel Xeon® Scalable Processors - Naming Decoder

Processor Description Offering
Suffix
P Cloud - IaaS Processor specifications optimized for IaaS cloud environments
such as orchestration efficiency in high-frequency VM
environments.
V Cloud - SaaS Processors specification optimized for SaaS cloud environments.
M Media Transcode Processor specifications optimized for AI and media processing
workloads.
H DB and Analytics Database and Analytics up to 4S and 8S depending on SKU
N Network/5G/Edge Network/5G/Edge
(High TPT/Low (High TPT /Low Latency) Processor specifications optimized for
Latency) communications/networking/NFV (Network Function(s)
Virtualization) workloads and operating environments.
S Storage & HCI Storage-optimized SKU with full accelerators enabled (DSA, QAT,
DLB)
T Long-life Use/High Support for up to 10-year reliability and support for higher Tcase.
Tcase These SKUs are often used in operating environments with long-life
use requirements and require Network Equipment Building System
(NEBS)-Thermal friendly specification support.
U 1-Scoket Supported in one-socket configurations only.
Optimized*
Q Liquid cooling Lower Tcase SKUs, targeted towards liquid cooling
+ Feature + Feature plus (+) SKU contains 1 of each accelerator enabled (DSA,
DLB, QAT, IAA)

DA - 16305 Worldwide QuickSpecs — Version 26 — 4/7/2025 Page 5

QuickSpecs HPE ProLiant ML110 Gen11

Standard Features
Intel Fourth Generation Xeon® Scalable Processors
Intel Xeon Models CPU Cores L3 Power UPI DDR5 SGX Enclave
Frequency Cache
(16 GT/s) size
Gold Processors
Gold 6421N 4400 MT/s 128 GB
1.8 GHz 32 60 MB 185W N/A
Processor*
Gold 6426Y Processor 2.5 GHz 16 37.5 MB 185W 3 4800 MT/s 128 GB
Gold 5418Y Processor 2.0 GHz 24 45 MB 185W 3 4400 MT/s 128 GB
Gold 5412U 185W 4400 MT/s
2.1 GHz 24 45 MB N/A 128 GB
Processor*
Gold 5411N 4400 MT/s
1.9 GHz 24 45 MB 165W N/A 128 GB
Processor*
Gold 5418N Processor 1.8 GHz 24 45 MB 165W 3 4000 MT/s 128 GB
Gold 5415+ Processor 2.9 GHz 8 22.5 MB 150W 3 4400 MT/s 128 GB
Gold 5416S Processor 2.0 GHz 16 30 MB 150W 3 4400 MT/s 128 GB
Sliver Processors
Silver 4416+ 2.0 GHz 20 37.5 MB 165W 2 4000 MT/s
64 GB
Processor
Silver 4410Y 2.0 GHz 12 30 MB 150W 2 4000 MT/s
64 GB
Processor
Bronze Processor
Bronze 3408U 1.8 GHz 8 22.5 MB 125W N/A 4000 MT/s
64 GB
Processor*

Intel Fifth Generation Xeon® Scalable Processors

Intel Xeon Models CPU Cores L3 Power UPI DDR5 SGX Enclave
Frequency Cache
(16 GT/s) size
Gold Processors
Gold 5512U 4800 MT/s 128 GB
2.1 GHz 28 52.5 MB 185W N/A
Processor*
Gold 5515+ Processor 3.2 GHz 8 22.5 MB 165W 3 4800 MT/s 128 GB
Sliver Processors
Silver 4516Y+ 2.2 GHz 24 45 MB 185W 2 4400 MT/s
64 GB
Processor
Silver 4514Y 2.0 GHz 16 30 MB 150W 2 4400 MT/s
64 GB
Processor
Silver 4510 Processor 2.4 GHz 12 30 MB 150W 2 4400 MT/s 64 GB
Silver 4509Y 2.6 GHz 8 22.5 MB 125W 2 4400 MT/s
64 GB
Processor
Bronze Processor
Bronze 3508U 2.1 GHz 8 22.5 MB 125W N/A 4400 MT/s
64 GB
Processor*

Notes:

− 80 PCIe 5.0 lanes per processor.

− * "U" processors (i.e. 5412U, 3408U, 3508U) and 6421N, 5411N are only supported in single socket
configuration.
− Bronze Processors (3408U and 3508U) are supported up to PCIe Gen4.
− Intel VROC NVMe feature is not supported with 4510, 4509Y and 3508U processors.

DA - 16305 Worldwide QuickSpecs — Version 26 — 4/7/2025 Page 6

QuickSpecs HPE ProLiant ML110 Gen11

Standard Features
− DDR5 memory speed is the maximum memory speed supported by the processor. Actual maximum memory
speed is a function of the memory type, memory configuration, and processor model.

Chipset
Intel® C741 Chipset
Notes: For more information regarding Intel® chipsets, please see the following URL:
https://www.intel.com/content/www/us/en/products/chipsets/server-chipsets.html

System Management Chipset

HPE iLO 6 ASIC

Notes: Read and learn more in the iLO QuickSpecs.

Memory
One of the following depending on model

Type HPE DDR5 Smart Memory, Registered (RDIMM)

DIMM Slots 16 DIMM slots
Available
16 DIMM slots per processor, 8 channels per processor, 2 DIMM per channel
Maximum capacity 1.5TB

(RDIMM) 16 x 96 GB RDIMM @ 4400MT/s at 2DPC with 5th Gen Intel Processors and
DDR5 5600 DIMMs

1.0 TB

16 x 64 GB RDIMM @ 4400MT/s at 2DPC with 4th Gen Intel Processors and

DDR5 4800 DIMMs

Notes:

− Actual maximum memory speed is a function of the memory type, memory configuration, and processor model.
− 96GB DDR5-5600 DIMM is not supported with 4510, 4509Y and 3508U processors.
− For additional information, please see the HPE DDR5 Smart Memory QuickSpecs.
− For General Server Memory and Persistent Memory Population Rules and Guidelines for Gen11 see details
here:
http://www.hpe.com/docs/memory-population-rules

Memory Protection
Advanced ECC
Advanced ECC uses single device data correction to detect and correct single and all multibit error that occurs
within a single DRAM chip.

DA - 16305 Worldwide QuickSpecs — Version 26 — 4/7/2025 Page 7

QuickSpecs HPE ProLiant ML110 Gen11

Standard Features

Expansion Slots
Default Slots
Notes:
− Bus width indicates the number of physical electrical lanes running to the connector.
− There are two PCIe Gen5 x16 slots is available by default:

Default Slots
Slots # Processor Technology Bus Width Connector Slot Form Factor
Width
1 CPU 1 PCIe 5.0 X16 X16 Full-height, full-length slot
4 CPU 1 PCIe 5.0 X16 X16 Full-height, half-length slot

Optional GPU Riser Kit

Notes:
− Bus width indicates the number of physical electrical lanes running to the connector.
− Double Width expansion card is only supported with slot 2 and results slot 3 space been occupied.
− Two GPU Riser Kit types:

ο HPE ProLiant ML110 Gen11 GPU Riser Kit (P53487-B21) provides Slot 2 as PCIe Gen5 x16 slot included
riser cage, PCA and cables.

ο HPE ProLiant ML110 Gen11 Second GPU Riser Kit (P53488-B21) provides Slot 3 as PCIe Gen5 x16 slot
included PCA and cables only, Thus HPE ProLiant ML110 Gen11 GPU Riser Kit (P53487-B21) is required
while Second GPU riser kit selected.

HPE ProLiant ML110 Gen11 GPU Riser Kit

Slots # Processor Technology Bus Connector Slot Form Factor
Width Width
2 CPU 1 PCIe 5.0 X16 X16 Full-height, full-length slot
3 CPU 1 PCIe 5.0 X16 X16 Full-height, full-length slot

Internal Storage Devices

Optical Drive
Available as an option (DVD-ROM or DVD-RW)

Hard Disk Drive/ Solid State Drive

Available as an option
Storage Controllers
NVMe Boot Devices
HPE NS204i-u Gen11 NVMe Hot Plug Boot Optimized Storage Device

DA - 16305 Worldwide QuickSpecs — Version 26 — 4/7/2025 Page 8

QuickSpecs HPE ProLiant ML110 Gen11

Standard Features
Hybrid RAID
Notes:
Additional steps are required for OS installation with Intel VROC, please refer to the link Intel Virtual RAID on
CPU for HPE Gen11 User Guide - Installing OS on the Intel VROC RAID

Intel VROC SATA for HPE ProLiant Gen11

Notes:
− All models feature embedded storage controller that supports SATA RAID with up to 4+4 LFF or 8 SFF
drive and 2xM.2 SATA drives. Each LFF drive cages are separated drive groups, SFF drive cage also
separates to two drive groups (Bay1-4 and Bay5-8) and 2x M.2 SATA drives from onboard slots.
− When NS204i-u selected, embedded storage controller port will be occupied and no LFF/SFF bay is
supported.
− Intel VROC for HPE ProLiant Gen11 is an enterprise, Hybrid RAID solution specifically designed for
SSDs.
− Intel VROC is a software-based solution utilizing Intel CPU to RAID or HBA direct connected drives.
− RAID Support- 0/1/5/10.
− Windows and Linux OS support.
− Host Tools- Windows GUI/CLI, Linux CLI.
− UEFI Support- HII Utility, OBSE.
− iLO Support- IML, Alert, SNMP, AHS.
− iLO Redfish- Redfish Read.
− Intel VROC SATA for HPE ProLiant Gen11 will operate in UEFI mode only. For legacy support an
additional storage controller will be needed.
− Intel VROC SATA is off by default and must be enabled.

Intel VROC NVMe for HPE ProLiant Gen11

Notes:
− All models feature two M.2 slots for NVMe connectivity, provides support for up to two M.2 NVMe drives
with onboard slots.
− Intel VROC for HPE ProLiant Gen11 is an enterprise, Hybrid RAID solution specifically
designed for NVMe SSDs connected directly to the CPU. Intel VROC is a software-based solution
utilizing Intel CPU to RAID or HBA direct connected drives.
− Intel Virtual RAID on CPU RAID 1 (S3Q39AAE/S3Q19A) must be ordered to enable RAID support.
− Windows, Linux, VMware OS support.
− Host Tools- Windows GUI/CLI, Linux CLI.
− UEFI Support- HII Utility, OBSE.
− Active health monitoring of NVMe M.2 drives requires use of SMART tools.
− Intel VROC NVMe for HPE ProLiant Gen11 will operate in UEFI mode only. For legacy support an
additional Tri-
Mode controller will be needed.
− For NVMe SSDs only, no PCIe card support.
− ML110 Gen11 supports up to 2x M.2 NVMe drives on onboard slots with Intel Virtual RAID on CPU RAID
1 (S3Q39AAE/S3Q19A).
− Intel VROC NVMe feature is not supported with 4510, 4509Y and 3508U processors.
Essential RAID Controllers
HPE Smart Array E208e-p SR Gen10 Controller
Tri-mode RAID Controllers

HPE MR216i-o Gen11 x16 Lanes without Cache OCP SPDM Storage Controller

DA - 16305 Worldwide QuickSpecs — Version 26 — 4/7/2025 Page 9

QuickSpecs HPE ProLiant ML110 Gen11

Standard Features
HPE MR216i-p Gen11 x16 Lanes without Cache OCP SPDM Storage Controller
HPE MR408i-o Gen11 x8 Lanes 4GB Cache OCP SPDM Storage Controller
HPE MR408i-p Gen11 x8 Lanes 4GB Cache PCI SPDM Plug-in Storage Controller
HPE MR416i-o Gen11 x16 Lanes 8GB Cache OCP SPDM Storage Controller

Maximum Storage
Drive Capacity Configuration
Hot Plug LFF SAS HDD 192 TB 8 x24 TB
Hot Plug LFF SAS SSD 7.68 TB 8 x960 GB
Hot Plug LFF SATA HDD 192 TB 8 x24 TB
Hot Plug LFF SATA SSD 7.68 TB 8 x960 GB
Hot Plug SFF SAS HDD 38.4 TB 16 x2.4TB
Hot Plug SFF SAS SSD 245.76 TB 16 x15.36 TB
Hot Plug SFF SATA SSD 122.88 TB 16 x7.68 TB
Hot Plug NVMe M.2 SSD 480 GB 2 x480 GB (NS204i-u boot option with RAID1
protected)
SATA/NVMe M.2 SSD 960 GB/3.84 TB 2 x480 GB/2 x1.92 TB
(Onboard slot)

Graphics
Integrated Video Standard

Video modes up to 1920 x 1200@60Hz (32 bpp)

16MB Video Memory

HPE iLO 6 on system management memory

64 MB Flash
8 Gbit DDR 4 with ECC protection

Power Supply
HPE 500W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit

Notes: Available in 94%. Power Efficiency

HPE 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit

Notes: Available in 94%. Power Efficiency

HPE 1000W Flex Slot Titanium Hot Plug Low Halogen Power Supply Kit

Notes: Available in 96%. Power Efficiency

HPE 1600W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
Notes:
− Available in 94% Power Efficiency.
− 200-240VAC power input only.
HPE Flexible Slot (Flex Slot) Power Supplies share a common electrical and physical design that allows for hot
plug, tool-less installation into HPE ProLiant Gen11 Performance Servers. Flex Slot power supplies are certified

DA - 16305 Worldwide QuickSpecs — Version 26 — 4/7/2025 Page 10

QuickSpecs HPE ProLiant ML110 Gen11

Standard Features
for high-efficiency operation and offer multiple power output options, allowing users to "right-size" a power supply
for specific server configurations. This flexibility helps to reduce power waste, lower overall energy costs, and
avoid "trapped" power capacity in the data center.

All pre-configured servers ship with regional specific power cord with tower server. If a different power cord is
required, please check the ProLiant Power Cables web page.

To review the power requirements for your selected system, please use the HPE Power Advisor Tool.

For information on power specifications and technical content visit HPE Server power supplies

Interfaces
Serial Optional, rear
Display Port 1 standard, front
VGA Port 1 VGA Port standard, rear
Network Ports 2 1GbE BCM5720 embedded NIC. Choice of OCP or stand up card
HPE iLO Remote 1 GbE Dedicated, rear
Management Network
Port
Front iLO Service Port 1 standard, front
USB 3.2 Gen1 4 standard on all models: 1 front, 2 rear, 1 internal
USB 2.0 1 internal

Operating Systems and Virtualization Software Support for HPE Servers

HPE servers are designed for seamless integration with partner Operating Systems and Virtualization Software.
By collaborating closely with our partners, we ensure that their products are optimized, certified, and fully
supported within your HPE server environment.

Access the certified and supported servers for each of the OS and Virtualization software: HPE Servers Support
& Certification Matrices

UEFI enables numerous new capabilities specific to HPE ProLiant servers such as

Secure Boot and Secure Start enabled for enhanced security

Operating system specific functionality
Support for > 2.2 TB (using GPT) boot drives
USB 3.2 Gen1 Stack
Embedded UEFI Shell
Mass Configuration Deployment Tool using iLO RESTful API that is Redfish API Conformant
PXE boot support for IPv4 IPv6 networks
Workload Profiles for simple performance optimization
UEFI Boot Mode only

TPM 2.0 Support

NVMe Boot Support

DA - 16305 Worldwide QuickSpecs — Version 26 — 4/7/2025 Page 11

QuickSpecs HPE ProLiant ML110 Gen11

Standard Features
iSCSI Software Initiator Support.
HTTP/HTTPs Boot support as a PXE alternative.
Boot support for option cards that only support a UEFI option ROM

Notes: For UEFI Boot Mode, boot environment and OS image installations should be configured properly to
support UEFI.

Industry Standard Compliance

ACPI 6.4 Compliant
PCIe 5.0 Compliant
WOL Support
Microsoft® Logo certifications
Support for Microsoft Secure Code
PXE Support
VGA/Display Port
USB 3.2 Gen1 Compliant
USB 2.0 Compliant
OCP 3.0 SFF NIC Support
OCP 3.0 SFF Storage Support
Embedded TPM Support
Energy Star
SMBIOS 3.4
UEFI 2.7
UEFI Class 3 (Unified Extensible Firmware Interface Forum)
Redfish API
IPMI 2.0
Advanced Encryption Standard (AES)
Triple Data Encryption Standard (3DES)
SNMP v3
TLS 1.2
DMTF Systems Management Architecture for Server Hardware Command Line Protocol (SMASH CLP)
DMTF Redfish support for SecureBoot Key Management
ACPI DSM Drive LED Management
Memory Page Retire Support
Retire old VMware Secure Boot Key
MCTP
I3C Engine
APML
Active Directory v1.0
ASHRAE A3/A4
Notes: For additional technical, thermal details regarding ambient temperature, humidity, and feature
support, please visit https://www.hpe.com/support/ASHRAEGen11

Embedded Management

DA - 16305 Worldwide QuickSpecs — Version 26 — 4/7/2025 Page 12

QuickSpecs HPE ProLiant ML110 Gen11

Standard Features
HPE Integrated Lights-Out (HPE iLO)
Monitor your servers for ongoing management, service alerting, reporting and remote management with HPE iLO.

Learn more at http://www.hpe.com/info/ilo.

UEFI

Configure and boot your servers securely with industry standard Unified Extensible Firmware Interface (UEFI).

Learn more at http://www.hpe.com/servers/uefi

Intelligent Provisioning

Hassle free server and OS provisioning for 1 or more servers with Intelligent Provisioning.
Learn more at http://www.hpe.com/servers/intelligentprovisioning

iLO RESTful API

iLO RESTful API is Redfish API conformance and offers simplified server management automation such as
configuration and maintenance tasks based on modern industry standards. Learn more at
http://www.hpe.com/info/restfulapi

HPE Compute Ops Management

Transform compute lifecycle management with a cloud experience that delivers greater simplicity, agility, and
speed across your entire server environment, wherever it lives. This software-as-a-service tool provides a
dashboard with global visibility and intuitive management of server health, security and compliance status to help
you easily identify areas that need immediate attention. Users can update tens to thousands of servers faster
through intelligent delta-based firmware downloads and on-demand HPE iLO firmware updates.
HPE Compute Ops Management is cloud-native software that is continually updated with new services, features,
patches, and firmware packs. The management application resides in HPE GreenLake cloud (access via
https://common.cloud.hpe.com) and leverages the HPE GreenLake architecture, security, and unified
operations.
For a complete list of software as-a-service subscription SKUs and more information, visit the HPE Compute Ops
Management QuickSpecs: https://www.hpe.com/psnow/doc/a50004263enw
For information on supported HPE servers, the complete list can be found here:
https://www.hpe.com/info/com-supported-servers

Server Utilities

Active Health System

The HPE Active Health System (AHS) is an essential component of the iLO management portfolio that provides
continuous, proactive health monitoring of HPE servers. Learn more at http://www.hpe.com/servers/ahs

Active Health System Viewer

DA - 16305 Worldwide QuickSpecs — Version 26 — 4/7/2025 Page 13

QuickSpecs HPE ProLiant ML110 Gen11

Standard Features
The Active System Health Viewer (AHSV) was deprecated as of March 2022. Users are now recommended to use
the InfoSight (https://www.hpe.com/us/en/solutions/infosight.html) for Servers Portal for AHS viewing capabilities.
In InfoSight for Servers portal, users will also be able to view hardware configuration details, firmware and driver
information, warranty and support status of a server, wellness alerts, and create support cases for servers under a
valid warranty or support contract.

HPE InfoSight provides the same security assurances as that of AHSV. Furthermore, InfoSight can be used as an
AHSV replacement even if customers do not want to share AHSV logs and telemetry data on an ongoing basis.

Notes: HPE InfoSight has been in EOS since November 1, 2024. For additional information, please visit
https://hpe.seismic.com/Link/Content/DCdbDWRqG4RHWGmJDWbgcfHFF9hP
Smart Update
Keep your servers up to date with the HPE Smart Update solution by using Smart Update Manager (SUM) to
optimize the firmware and driver updates of the Service Pack for ProLiant (SPP).
Learn more at https://www.hpe.com/us/en/servers/smart-update.html

iLO Amplifier Pack

Designed for large enterprise and service provider environments with hundreds of HPE servers, the iLO Amplifier
Pack is a free, downloadable open virtual application (OVA) that delivers the power to discover, inventory and
update Gen8, Gen9, Gen10 and Gen11 HPE servers at unmatched speed and scale. Use with an iLO Advanced
License to unlock full capabilities.

Learn more at http://www.hpe.com/servers/iLOamplifierpack

Notes: HPE iLO Amplifier Pack has been in EOS since November 1, 2024. For additional information, please visit
https://hpe.seismic.com/Link/Content/DCdbDWRqG4RHWGmJDWbgcfHFF9hP

RESTful Interface Tool

RESTful Interface tool (iLOREST) is a single scripting tool to provision using iLO RESTful API to discover and
deploy servers at scale. Learn more at http://www.hpe.com/info/resttool

Scripting Tools

Provision one to many servers using your own scripts to discover and deploy with Scripting Tool (STK) for
Windows and Linux or Scripting Tools for Windows PowerShell. Learn more at
http://www.hpe.com/servers/powershell

HPE OneView Standard

HPE OneView is an on premises, multi-generational server monitoring and management solution. HPE OneView
Standard can be used for inventory, health monitoring, alerting, and reporting without additional fees. Customers
can upgrade their management experience with an HPE OneView Advanced license, all provided by the same
tool. Learn more at http://www.hpe.com/info/oneview.

Security
UEFI Secure Boot and Secure Start support
Immutable Silicon Root of Trust
FIPS 140-3 validation (iLO 6 certification in progress)

DA - 16305 Worldwide QuickSpecs — Version 26 — 4/7/2025 Page 14

QuickSpecs HPE ProLiant ML110 Gen11

Standard Features
Common Criteria certification (iLO 6 certification in progress)
Configurable for PCI DSS compliance
Advanced Encryption Standard (AES) and Triple Data Encryption Standard (3DES) on browser
Support for Commercial National Security Algorithms (CNSA)
Tamper-free updates - components digitally signed and verified
Secure Recovery - recover critical firmware to known good state on detection of compromised firmware
Ability to rollback firmware
Secure erase of NAND
TPM (Trusted Platform Module) 2.0
Front bezel key-lock feature - standard, available in both Tower and Rack models
Padlock slot, standard
Kensington Lock slot, standard
Chassis Intrusion detection option

Warranty
This product is covered by a global limited warranty and supported by HPE Services and a worldwide network of
HPE Authorized Channel Partners resellers. Hardware diagnostic support and repair is available for three years
from date of purchase. Support for software and initial setup is available for 90 days from date of purchase.
Enhancements to warranty services are available through HPE Services operational services or customized
service agreements. Hard drives have either a one year or three year warranty; refer to the specific hard drive
QuickSpecs for details.

Notes: Server Warranty includes 3-Year Parts, 3-Year Labor, 3-Year Onsite support with next business day
response. Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These
parts fall into two categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor
charge will result when customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also
designed for easy replacement but may involve added complexity. Customers may choose to have Hewlett
Packard Enterprise replace Optional CSR parts at no charge. 3) Non CSR parts must be serviced by a trained
authorized service engineer. Additional information regarding worldwide limited warranty and technical support is
available at: https://www.hpe.com/support/ProLiantServers-Warranties

DA - 16305 Worldwide QuickSpecs — Version 26 — 4/7/2025 Page 15

QuickSpecs HPE ProLiant ML110 Gen11

Optional Features

Server Management

HPE iLO Advanced

HPE iLO Advanced licenses offer smart remote functionality without compromise, for all HPE ProLiant
servers. The license includes the full integrated remote console, virtual keyboard, video, and mouse (KVM),
multi-user collaboration, console record and replay, and GUI-based and scripted virtual media and virtual
folders. You can also activate the enhanced security and power management functionality.

HPE OneView Advanced-

HPE OneView brings a new level of automation to infrastructure management by taking a template driven
approach to provisioning, updating, and integrating compute, storage, and networking infrastructure. It
provides full-featured licenses which can be purchased for managing Gen8, Gen9, Gen10 and Gen11
servers. To learn more visit http://www.hpe.com/info/oneview.

HPE InfoSight for Servers

HPE InfoSight for Servers combines the cloud-based machine learning of InfoSight with the health and
performance monitoring of Active Health System (AHS) and iLO to optimize performance and predict and
prevent problems. The end result is an intelligent environment that modernizes IT operations and enhances
the support experience by predicting and preventing the infrastructure issues that lead to application
disruptions, wasted IT staff time and missed business opportunities.

Learn more at https://www.hpe.com/servers/infosight

Notes: HPE InfoSight has been in EOS since November 1, 2024. For additional information, please visit
https://hpe.seismic.com/Link/Content/DCdbDWRqG4RHWGmJDWbgcfHFF9hP

HPE Insight Cluster Management Utility (CMU)

HPE Insight Cluster Management Utility is a HyperScale management framework that includes software for
the centralized provisioning, management and monitoring of nodes and infrastructure. Learn more at HPE
Insight Cluster Management Utility.

Accelerator and GPGPU Information

Hewlett Packard Enterprise supports various accelerators on select HPE ProLiant servers to support
different workloads. The accelerators enable seamless integration of GPU computing with HPE ProLiant
servers for high-performance computing, large data center graphics, deep learning and virtual desktop
deployments. These accelerators deliver all of the standard benefits of GPU computing while enabling
maximum reliability and tight integration with system monitoring and management tools such as HPE
Insight Cluster Management Utility.

Rack and Power Infrastructure

The story may end with servers, but it starts with the foundation that makes compute go - and business
grow. We've reinvented our entire portfolio of rack and power products to make IT infrastructure more

DA - 16305 Worldwide QuickSpecs — Version 26 — 4/7/2025 Page 16

QuickSpecs HPE ProLiant ML110 Gen11

Optional Features
secure, more practical, and more efficient. In other words, we've created a stronger, smarter, and simpler
infrastructure to help you get the most out of your IT equipment. As an industry leader, Hewlett Packard
Enterprise is uniquely positioned to address the key concerns of power, cooling, cable management and
system access.

HPE G2 Advanced and Enterprise Racks are perfect for the server room or today's modern data center with
enhanced airflow and thermal management, flexible cable management, and a 10 year Warranty to support
higher density computing.

HPE G2 PDUs offer reliable power in flexible form factors that operate at temperatures up to 60°, include
color-coded outlets and load segments and a low-profile design for optimal access to the rack and support
for dense rack environments.

HPE Uninterruptible Power Systems are cost-effective power protection for any type workload. Some UPSs
include options for remote management and extended runtime modules so your critical dense data center is
covered in power outages.

HPE KVM Solutions include a console and switches designed to work with your server and IT equipment
reliably. We've got a cost-effective KVM switch for your first rack and multiple connection IP switches with
remote management and security capabilities to keep your data center rack up and running.

Learn more about HPE Racks, KVM, PDUs and UPSs at HPE Rack and Power Infrastructure.

One Config Simple (SCE)

SCE is a guided self-service tool to help sales and non-technical people provide customers with initial
configurations in 3 to 5 minutes. You may then send the configuration on for configuration help, or use in
your existing ordering processes. If you require "custom" rack configuration or configuration for products not
available in SCE, please contact Hewlett Packard Enterprise Customer Business Center or an Authorized
Partner for assistance.

https://h22174.www2.hpe.com/SimplifiedConfig/Welcome

DA - 16305 Worldwide QuickSpecs — Version 26 — 4/7/2025 Page 17

QuickSpecs HPE ProLiant ML110 Gen11

Service and Support

HPE Services
No matter where you are in your digital transformation journey, you can count on HPE Services to deliver the
expertise you need when, where and how you need it. From planning to deployment, ongoing operations and
beyond, our experts can help you realize your digital ambitions.
https://www.hpe.com/services

Consulting Services
No matter where you are in your journey to hybrid cloud, experts can help you map out your next steps. From
determining what workloads should live where, to handling governance and compliance, to managing costs, our
experts can help you optimize your operations.
https://www.hpe.com/services/consulting

HPE Managed Services

HPE runs your IT operations, providing services that monitor, operate, and optimize your infrastructure and
applications, delivered consistently and globally to give you unified control and let you focus on innovation.
HPE Managed Services | HPE

Operational services
Optimize your entire IT environment and drive innovation. Manage day-to-day IT operational tasks while freeing up
valuable time and resources. Meet service-level targets and business objectives with features designed to drive
better business outcomes.
https://www.hpe.com/services/operational

HPE Complete Care Service

HPE Complete Care Service is a modular, edge-to-cloud IT environment service designed to help optimize your
entire IT environment and achieve agreed upon IT outcomes and business goals through a personalized
experience. All delivered by an assigned team of HPE Services experts. HPE Complete Care Service provides:

A complete coverage approach -- edge to cloud

An assigned HPE team
Modular and fully personalized engagement
Enhanced Incident Management experience with priority access
Digitally enabled and AI driven customer experience
https://www.hpe.com/services/completecare

HPE Tech Care Service

HPE Tech Care Service is the operational support service experience for HPE products. The service goes beyond
traditional support by providing access to product specific experts, an AI driven digital experience, and general
technical guidance to not only reduce risk but constantly search for ways to do things better. HPE Tech Care
Service delivers a customer-centric, AI driven, and digitally enabled customer experience to move your business
forward. HPE Tech Care Service is available in three response levels. Basic, which provides 9x5 business hour
availability and a 2-hour response time. Essential which provides a 15-minute response time 24x7 for most
enterprise level customers, and Critical which includes a 6-hour repair commitment where available and outage
management response for severity 1 incidents.
https://www.hpe.com/services/techcare

DA - 16305 Worldwide QuickSpecs — Version 26 — 4/7/2025 Page 18

QuickSpecs HPE ProLiant ML110 Gen11

Service and Support

HPE Lifecycle Services

HPE Lifecycle Services provide a variety of options to help maintain your HPE systems and solutions at all stages
of the product lifecycle. A few popular examples include:

Lifecycle Install and Startup Services: Various levels for physical installation and power on, remote access
setup, installation and startup, and enhanced installation services with the operating system.
HPE Firmware Update Analysis Service: Recommendations for firmware revision levels for selected HPE
products, taking into account the relevant revision dependencies within your IT environment.
HPE Firmware Update Implementation Service: Implementation of firmware updates for selected HPE server,
storage, and solution products, taking into account the relevant revision dependencies within your IT
environment.
Implementation assistance services: Highly trained technical service specialists to assist you with a variety of
activities, ranging from design, implementation, and platform deployment to consolidation, migration, project
management, and onsite technical forums.
HPE Service Credits: Access to prepaid services for flexibility to choose from a variety of specialized service
activities, including assessments, performance maintenance reviews, firmware management, professional
services, and operational best practices.
Notes: To review the list of Lifecycle Services available for your product go to:
https://www.hpe.com/services/lifecycle
For a list of the most frequently purchased services using service credits, see the HPE Service Credits Menu

Other Related Services from HPE Services:

HPE Education Services
Training and certification designed for IT and business professionals across all industries. Broad catalogue of
course offerings to expand skills and proficiencies in topics ranging from cloud and cybersecurity to AI and
DevOps. Create learning paths to expand proficiency in a specific subject. Schedule training in a way that works
best for your business with flexible continuous learning options.
https://www.hpe.com/services/training

Defective Media Retention

An option available with HPE Complete Care Service and HPE Tech Care Service and applies only to Disk or
eligible SSD/Flash Drives replaced by HPE due to malfunction.
Consult your HPE Sales Representative or Authorized Channel Partner of choice for any additional questions and
services options.
Parts and Materials
HPE will provide HPE-supported replacement parts and materials necessary to maintain the covered hardware
product in operating condition, including parts and materials for available and recommended engineering
improvements.
Parts and components that have reached their maximum supported lifetime and/or the maximum usage limitations
as set forth in the manufacturer's operating manual, product quick-specs, or the technical product data sheet will
not be provided, repaired, or replaced as part of these services.
How to Purchase Services
Services are sold by Hewlett Packard Enterprise and Hewlett Packard Enterprise Authorized Service Partners:

Services for customers purchasing from HPE or an enterprise reseller are quoted using HPE order
configuration tools.
Customers purchasing from a commercial reseller can find services at https://ssc.hpe.com/portal/site/ssc/

DA - 16305 Worldwide QuickSpecs — Version 26 — 4/7/2025 Page 19

QuickSpecs HPE ProLiant ML110 Gen11

Service and Support

AI Powered and Digitally Enabled Support Experience
Achieve faster time to resolution with access to product-specific resources and expertise through a digital and data
driven customer experience.
Sign into the HPE Support Center experience, featuring streamlined self-serve case creation and management
capabilities with inline knowledge recommendations. You will also find personalized task alerts and powerful
troubleshooting support through an intelligent virtual agent with seamless transition when needed to a live support
agent.
https://support.hpe.com/hpesc/public/home/signin

Consume IT On Your Terms

HPE GreenLake edge-to-cloud platform brings the cloud experience directly to your apps and data wherever they
are-the edge, colocations, or your data center. It delivers cloud services for on-premises IT infrastructure
specifically tailored to your most demanding workloads. With a pay-per-use, scalable, point-and-click self-service
experience that is managed for you, HPE GreenLake edge-to-cloud platform accelerates digital transformation in a
distributed, edge-to-cloud world.
Get faster time to market
Save on TCO, align costs to business
Scale quickly, meet unpredictable demand
Simplify IT operations across your data centers and clouds
To learn more about HPE Services, please contact your Hewlett Packard Enterprise sales representative or Hewlett
Packard Enterprise Authorized Channel Partner. Contact information for a representative in your area can be
found at "Contact HPE" https://www.hpe.com/us/en/contact-hpe.html
For more information
http://www.hpe.com/services

DA - 16305 Worldwide QuickSpecs — Version 26 — 4/7/2025 Page 20

QuickSpecs HPE ProLiant ML110 Gen11

Pre-configured Models

HPE Smart Choice purchase program

The HPE Smart Choice purchase program features popular fully configured products that can be quoted in
minutes and shipped quickly through HPE Authorized Partners. Products are configured and tested in an
HPE factory and stocked at HPE Authorized Distributors and Partners. The products arrive in a single box,
making onsite integration easier and more efficient for partners and customers. Additionally, there are
aggressively priced HPE Tech Care Services available only through the HPE Smart Choice program when
you purchase an HPE Smart Choice product.

For HPE Smart Choice configuration and product details, please visit the Smart Choice Supplemental
QuickSpecs: https://www.hpe.com/psnow/doc/a50009219enw
Pre-Configured models ship with the configurations below.

Pre-Configured models ship with the configurations below. Options can be selected from the Core or
Additional options section of this QuickSpecs.
Hewlett Packard Enterprise does not allow factory integration of options into pre-configured models.
Any additional options purchased will not be shipped inside the server.
Network Choice models do not include embedded LOM.
Base Models
P55536-001
SKU P55536-291 P70278-291
P55640-421
Number P55536-371 P70278-421
P55536-AA1
P70278-291:
HPE ProLiant ML110 Gen11
4510 2.4GHz 12-core 1P
HPE ProLiant ML110 Gen11 HPE ProLiant ML110 Gen11 32GB-R MR408i-o 8SFF
4410Y 2.0GHz 12-core 1P 4410Y 2.0GHz 12-core 1P 800W RPS JP Server
Model Name
32GB-R VROC 8SFF 800W 32GB-R VROC 8SFF 1000W P70278-421:
RPS Server RPS Server HPE ProLiant ML110 Gen11
4510 2.4GHz 12-core 1P
32GB-R MR408i-o 8SFF
1000W RPS EMEA Server
Chassis HPE ProLiant ML110 Gen11 SFF Configure-to-order Server
4410Y (12 core, 2.0 GHz, 4410Y (12 core, 2.0 GHz, 4510 (12 core, 2.4 GHz,
Processor
150W) 150W) 150W)
Number of
One
Processors
32 GB (1x32 GB, 4800 MT/s) 32 GB (1x32 GB, 4800 MT/s) 32 GB (1x32 GB, 5600 MT/s)
Memory Notes: Runs at 4000 MT/s Notes: Runs at 4000 MT/s Notes: Runs at 4400 MT/s
due to processor limitation. due to processor limitation. due to processor limitation.
Network
Embedded 2-Port 1GbE BCM5720 networking ports
Controller

DA - 16305 Worldwide QuickSpecs — Version 26 — 4/7/2025 Page 21

QuickSpecs HPE ProLiant ML110 Gen11

Pre-configured Models
Embedded 8 SATA ports Embedded 8 SATA ports
controller with Intel® VROC controller with Intel® VROC
Hybrid RAID. Hybrid RAID.
Storage HPE MR408i-o Gen11 x8
Notes: Embedded controller Notes: Embedded controller
Lanes 4GB Cache OCP
Controller can only support SATA drive, can only support SATA drive,
SPDM Storage Controller
additional storage controller additional storage controller is
is required to support SAS required to support SAS
drive. drive.
Included
None ship standard, 8 SFF supported
Hard Drives
Optical Drive Optional. None ship standard.
Expansion
PCIe Gen5: 2 slots (x16), upgradable to 4 slots (x16); OCP3 with PCIe Gen5: 1 slot (x16)
Slots
P70278-291:
1x HPE 800W Flex Slot
Platinum Hot Plug Low
Halogen Power Supply Kit
Notes: Additional Power
1x HPE 800W Flex Slot 1x HPE 1000W Flex Slot Supply Kit (P38995-B21)
Platinum Hot Plug Low Titanium Hot Plug Power provides 1+1 power
Halogen Power Supply Kit Supply Kit redundancy feature.
Power
Notes: Additional Power Notes: Additional Power
Supply P70278-421:
Supply Kit (P38995-B21) Supply Kit (P03178-B21)
provides 1+1 power provides 1+1 power 1x HPE 1000W Flex Slot
redundancy feature. redundancy feature. Titanium Hot Plug Power
Supply Kit
Notes: Additional Power
Supply Kit (P03178-B21)
provides 1+1 power
redundancy feature.
Default with 2 standard fans, non-hot-plug. Optional Redundant Fan Kit (P49984-B21)
Fans provides advanced cooling in heavier configurations and redundancy functionality.
Notes: Configurations that require fan kits are provided in later sections.
HPE iLO Standard with Intelligent Provisioning (embedded), HPE OneView Standard
Management
(requires download); HPE iLO Advanced and HPE OneView Advanced (require licenses)

TPM (Trusted Platform TPM (Trusted Platform TPM (Trusted Platform

Security
Module) Module) Module)

4.5U Tower. Optional Tower-to-Rack conversion kit (P47394-B21) to convert the unit to a
Form Factor
5.5U Rack-mount server.
Server warranty includes 3-year parts, 3-year labor, 3-year onsite support with next business
Warranty
day response.

DA - 16305 Worldwide QuickSpecs — Version 26 — 4/7/2025 Page 22

QuickSpecs HPE ProLiant ML110 Gen11

Pre-configured Models

Performance Models
P55537-001
SKU P55537-291
P55641-421 P70279-421
Number P55537-371
P55537-AA1
HPE ProLiant ML110 Gen11 HPE ProLiant ML110 Gen11 HPE ProLiant ML110 Gen11
5416S 2.0GHz 16-core 1P 5416S 2.0GHz 16-core 1P 4514Y 2.0GHz 16-core 1P
Model Name
32GB-R VROC 8SFF 800W 32GB-R VROC 8SFF 1000W 32GB-R MR408i-o 8SFF
RPS Server RPS Server 1000W RPS EMEA Server
Chassis HPE ProLiant ML110 Gen11 SFF Configure-to-order Server
5416S (16 core, 2.0 GHz, 5416S (16 core, 2.0 GHz, 4514Y (16 core, 2.0 GHz,
Processor
150W) 150W) 150W)
Number of
One
Processors
32 GB (1x32 GB, 4800 MT/s) 32 GB (1x32 GB, 4800 MT/s) 32 GB (1x32 GB, 5600 MT/s)
Memory Notes: Runs at 4400 MT/s Notes: Runs at 4400 MT/s Notes: Runs at 4400 MT/s
due to processor limitation. due to processor limitation. due to processor limitation.
Network
Embedded 2-Port 1GbE BCM5720 networking ports
Controller
Embedded 8 SATA ports Embedded 8 SATA ports
controller with Intel® VROC controller with Intel® VROC
Hybrid RAID. Hybrid RAID.
Storage HPE MR408i-o Gen11 x8
Notes: Embedded controller Notes: Embedded controller
Lanes 4GB Cache OCP
Controller can only support SATA drive, can only support SATA drive,
SPDM Storage Controller
additional storage controller additional storage controller is
is required to support SAS required to support SAS
drive. drive.
Included
None ship standard, 8 SFF supported
Hard Drives
Optical Drive Optional. None ship standard.
Expansion
PCIe Gen5: 2 slots (x16), upgradable to 4 slots (x16); OCP3 with PCIe Gen5: 1 slot (x16)
Slots
1x HPE 800W Flex Slot 1x HPE 1000W Flex Slot 1x HPE 1000W Flex Slot
Platinum Hot Plug Low Titanium Hot Plug Power Titanium Hot Plug Power
Halogen Power Supply Kit Supply Kit Supply Kit
Power
Notes: Additional Power Notes: Additional Power Notes: Additional Power
Supply
Supply Kit (P38995-B21) Supply Kit (P03178-B21) Supply Kit (P03178-B21)
provides 1+1 power provides 1+1 power provides 1+1 power
redundancy feature. redundancy feature. redundancy feature.
Default with 2 standard fans, non-hot-plug. Optional Redundant Fan Kit (P49984-B21)
Fans provides advanced cooling in heavier configurations and redundancy functionality.
Notes: Configurations that require fan kits are provided in later sections.
HPE iLO Standard with Intelligent Provisioning (embedded), HPE OneView Standard
Management
(requires download); HPE iLO Advanced and HPE OneView Advanced (require licenses)

DA - 16305 Worldwide QuickSpecs — Version 26 — 4/7/2025 Page 23

QuickSpecs HPE ProLiant ML110 Gen11

Pre-configured Models

TPM (Trusted Platform TPM (Trusted Platform TPM (Trusted Platform

Security
Module) Module) Module)

4.5U Tower. Optional Tower-to-Rack conversion kit (P47394-B21) to convert the unit to a
Form Factor
5.5U Rack-mount server.
Server warranty includes 3-year parts, 3-year labor, 3-year onsite support with next business
Warranty
day response.

DA - 16305 Worldwide QuickSpecs — Version 26 — 4/7/2025 Page 24

QuickSpecs HPE ProLiant ML110 Gen11

Pre-configured Models

Entry Models
P55533-001 P55535-001
SKU P55533-291 P55535-291
P55534-001
Number P55533-371 P55535-371
P55533-AA1 P55535-AA1
HPE ProLiant ML110 Gen11 HPE ProLiant ML110 Gen11 HPE ProLiant ML110 Gen11
3408U 1.8GHz 8-core 1P 3408U 1.8GHz 8-core 1P 3408U 1.8GHz 8-core 1P
Model Name
16GB-R VROC 4LFF 500W 16GB-R VROC 4LFF 4TB 32GB-R VROC 8SFF 800W
RPS Server 500W RPS Server RPS Server
HPE ProLiant ML110 Gen11 HPE ProLiant ML110 Gen11 HPE ProLiant ML110 Gen11
Chassis LFF Configure-to-order LFF Configure-to-order SFF Configure-to-order
Server Server Server
Processor 3408U (8 core, 1.8 GHz, 125W)
Number of
One
Processors
16 GB (1x16 GB, 4800 MT/s) 16 GB (1x16 GB, 4800 MT/s) 32 GB (1x32 GB, 4800 MT/s)
Memory Notes: Runs at 4000 MT/s Notes: Runs at 4000 MT/s Notes: Runs at 4000 MT/s
due to processor limitation. due to processor limitation. due to processor limitation.
Network
Embedded 2-Port 1GbE BCM5720 networking ports
Controller
Embedded 8 SATA ports controller with Intel® VROC Hybrid RAID.
Storage
Notes: Embedded controller can only support SATA drive, additional storage controller is
Controller
required to support SAS drive.
Included None ship standard, 4 LFF None ship standard, 8 SFF
4TB SATA HDD
Hard Drives supported supported
Optical Drive Optional. None ship standard.
Expansion
PCIe Gen5: 2 slots (x16), upgradable to 4 slots (x16); OCP3 with PCIe Gen5: 1 slot (x16)
Slots
1x HPE 500W Flex Slot 1x HPE 500W Flex Slot 1x HPE 800W Flex Slot
Platinum Hot Plug Low Platinum Hot Plug Low Platinum Hot Plug Low
Halogen Power Supply Kit Halogen Power Supply Kit Halogen Power Supply Kit
Power
Notes: Additional Power Notes: Additional Power Notes: Additional Power
Supply
Supply Kit (865408-B21) Supply Kit (865408-B21) Supply Kit (P38995-B21)
provides 1+1 power provides 1+1 power provides 1+1 power
redundancy feature. redundancy feature. redundancy feature.
Default with 2 standard fans, non-hot-plug. Optional Redundant Fan Kit (P49984-B21)
Fans provides advanced cooling in heavier configurations and redundancy functionality.
Notes: Configurations that require fan kits are provided in later sections.
HPE iLO Standard with Intelligent Provisioning (embedded), HPE OneView Standard
Management
(requires download); HPE iLO Advanced and HPE OneView Advanced (require licenses)

DA - 16305 Worldwide QuickSpecs — Version 26 — 4/7/2025 Page 25

QuickSpecs HPE ProLiant ML110 Gen11

Pre-configured Models

TPM (Trusted Platform TPM (Trusted Platform TPM (Trusted Platform

Security
Module) Module) Module)

4.5U Tower. Optional Tower-to-Rack conversion kit (P47394-B21) to convert the unit to a
Form Factor
5.5U Rack-mount server.
Server warranty includes 3-year parts, 3-year labor, 3-year onsite support with next business
Warranty
day response.

DA - 16305 Worldwide QuickSpecs — Version 26 — 4/7/2025 Page 26

QuickSpecs HPE ProLiant ML110 Gen11

Pre-configured Models

Entry Models
SKU
P55637-421 P55638-421 P55639-421
Number
HPE ProLiant ML110 Gen11 HPE ProLiant ML110 Gen11 HPE ProLiant ML110 Gen11
3408U 1.8GHz 8-core 1P 3408U 1.8GHz 8-core 1P 3408U 1.8GHz 8-core 1P
Model Name
16GB-R VROC 4LFF 1000W 16GB-R VROC 4LFF 4TB 32GB-R VROC 8SFF 1000W
RPS Server 1000W RPS Server RPS Server
HPE ProLiant ML110 Gen11 HPE ProLiant ML110 Gen11 HPE ProLiant ML110 Gen11
Chassis LFF Configure-to-order LFF Configure-to-order SFF Configure-to-order
Server Server Server
Processor 3408U (8 core, 1.8 GHz, 125W)
Number of
One
Processors
16 GB (1x16 GB, 4800 MT/s) 16 GB (1x16 GB, 4800 MT/s) 32 GB (1x32 GB, 4800 MT/s)
Memory Notes: Runs at 4000 MT/s Notes: Runs at 4000 MT/s Notes: Runs at 4000 MT/s
due to processor limitation. due to processor limitation. due to processor limitation.
Network
Embedded 2-Port 1GbE BCM5720 networking ports
Controller
Embedded 8 SATA ports controller with Intel® VROC Hybrid RAID.
Storage
Notes: Embedded controller can only support SATA drive, additional storage controller is
Controller
required to support SAS drive.
Included None ship standard, 4 LFF None ship standard, 8 SFF
4TB SATA HDD
Hard Drives supported supported
Optical Drive Optional. None ship standard.
Expansion
PCIe Gen5: 2 slots (x16), upgradable to 4 slots (x16); OCP3 with PCIe Gen5: 1 slot (x16)
Slots
Power 1x HPE 1000W Flex Slot Titanium Hot Plug Power Supply Kit
Supply Notes: Additional Power Supply Kit (P03178-B21) provides 1+1 power redundancy feature.
Default with 2 standard fans, non-hot-plug. Optional Redundant Fan Kit (P49984-B21)
Fans provides advanced cooling in heavier configurations and redundancy functionality.
Notes: Configurations that require fan kits are provided in later sections.
HPE iLO Standard with Intelligent Provisioning (embedded), HPE OneView Standard
Management
(requires download); HPE iLO Advanced and HPE OneView Advanced (require licenses)
Security TPM (Trusted Platform Module)
4.5U Tower. Optional Tower-to-Rack conversion kit (P47394-B21) to convert the unit to a
Form Factor
5.5U Rack-mount server.
Server warranty includes 3-year parts, 3-year labor, 3-year onsite support with next business
Warranty
day response.

DA - 16305 Worldwide QuickSpecs — Version 26 — 4/7/2025 Page 27

QuickSpecs HPE ProLiant ML110 Gen11

Pre-configured Models

Entry Models
SKU
P60805-001
Number
HPE ProLiant ML110 Gen11 3408U 1.8GHz 8-core 1P 16GB-R VROC 4LFF 4TB 500W
Model Name
RPS Server
Chassis HPE ProLiant ML110 Gen11 LFF Configure-to-order Server
Processor 3408U (8 core, 1.8 GHz, 125W)
Number of
One
Processors
16 GB (1x16 GB, 4800 MT/s)
Memory
Notes: Runs at 4000 MT/s due to processor limitation.
Network
Embedded 2-Port 1GbE BCM5720 networking ports
Controller
Embedded 8 SATA ports controller with Intel® VROC Hybrid RAID.
Storage
Notes: Embedded controller can only support SATA drive, additional storage controller is
Controller
required to support SAS drive.
Included
4TB SATA HDD
Hard Drives
Optical Drive Optional. None ship standard.
Expansion
PCIe Gen5: 2 slots (x16), upgradable to 4 slots (x16); OCP3 with PCIe Gen5: 1 slot (x16)
Slots
1x HPE 500W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
Power
Notes: Additional HPE 500W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
Supply
(865408-B21) provides 1+1 power redundancy feature.
Default with 2 standard fans, non-hot-plug. Optional Redundant Fan Kit (P49984-B21)
Fans provides advanced cooling in heavier configurations and redundancy functionality.
Notes: Configurations that require fan kits are provided in later sections.
HPE iLO Standard with Intelligent Provisioning (embedded), HPE OneView Standard
Management
(requires download); HPE iLO Advanced and HPE OneView Advanced (require licenses)
Security TPM (Trusted Platform Module)
4.5U Tower. Optional Tower-to-Rack conversion kit (P47394-B21) to convert the unit to a
Form Factor
5.5U Rack-mount server.
Server warranty includes 3-year parts, 3-year labor, 3-year onsite support with next business
Warranty
day response.
Country Code Key

-001 = North America

-291 = Japan
-371 = Asia Pacific
-421 = Europe, the Middle East and Africa
-AA1 = China

DA - 16305 Worldwide QuickSpecs — Version 26 — 4/7/2025 Page 28

QuickSpecs HPE ProLiant ML110 Gen11

Pre-configured Models
Notes: European Union ErP Lot 9 2024 Regulation
Beginning on January 1st, 2024, units sold into the European Union (EU), European Economic Area (EEA),
the United Kingdom, or Switzerland must include more efficient AC power supplies: 94% for multi-output and
96% for single-output. HPE Flexible Slot power supplies are single-output, and part numbers 865438-B21,
P03178-B21, and P44712-B21 are 96% efficient, thus meeting requirements. HPE is on target to fulfil
compliant systems ahead of time and will begin enforcing these requirements in advance to satisfy requests
with the current power supplies by the set deadline.

DA - 16305 Worldwide QuickSpecs — Version 26 — 4/7/2025 Page 29

QuickSpecs HPE ProLiant ML110 Gen11

Configuration Information

Smart Templates from HPE

HPE is releasing new Smart Template technology in the One Config Advanced (OCA) configurator. These
Templates represent the CTO equivalents of the top-selling BTO configurations. They are intended to
provide simple starting points to assist you in easily creating and customizing your desired Server
solutions. HPE Servers that have Platform Templates, developed by HPE Product Managers, will have a
separate tab in the HPE OCA configurator.
Workload Solutions Templates from HPE
The Workload Solutions Templates build on the Smart Templates technology to easily develop working
configurations of the most compelling Workload Solutions. The templates complement the Reference
Builds developed by HPE. Workload Solutions templates preconfigure some of the key architecture
decisions and make it easier for Sellers to get started and complete a differentiated server solution for your
customer's specific workload.
Mainstream SKUs
HPE launched the Mainstream SKU initiative as a market-driven approach to Demand Steering. It is a
simplified portfolio of our top selling options that meet the current and future market trends. HPE has
committed to provide a more predictable and faster experience for these options. Mainstream SKUs enjoy
higher safety stock levels and have higher fulfilment service levels than non-Mainstream SKUs.
Mainstream orders are fulfilled +30% faster than non-Mainstream orders, have fewer shortages and better
recovery dates. This platform has Mainstream SKUs in the options portfolio, and is eligible for the
improved Mainstream experience. Mainstream SKUs are designated with a Mainstream symbol in our
configurators.
Mainstream Configurations
HPE is using the new Smart Templates technology to present Mainstream configurations. All the options in
a Mainstream configuration are pre-selected Mainstream SKUs to optimize the performance, predictability
and fulfilment experience. Check the Template section in our configurators for eligible Mainstream
configurations.

This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid
configurations are ordered, Hewlett Packard Enterprise recommends the use of an HPE approved
configurator. Contact your local sales representative for information on configurable product offerings and
requirements.

Factory Integrated Models must start with a CTO Server.

FIO indicates that this option is only available as a factory integratable option.
All Factory Integrated Models will be populated with sufficient hard drive blanks based on the number
of initial hard drives ordered with the server.
Some options may not be integrated at the factory. Contact your local sales representative for
additional information.

European Union ErP Lot 9 2024 Regulation

Beginning on January 1st, 2024, units sold into the European Union (EU), European Economic Area (EEA),
the United Kingdom, or Switzerland must include more efficient AC power supplies: 94% for multi-output
and 96% for single-output. HPE Flexible Slot power supplies are single-output, and part numbers 865438-
B21, P03178-B21, and P44712-B21 are 96% efficient, thus meeting requirements.
HPE is on target to fulfil compliant systems ahead of time and will begin enforcing these requirements in
advance to satisfy requests with the current power supplies by the set deadline.

Step 1: Base Configuration (choose one of the following configurable models)

DA - 16305 Worldwide QuickSpecs — Version 26 — 4/7/2025 Page 30

QuickSpecs HPE ProLiant ML110 Gen11

Configuration Information
CTO Server HPE ML110 Gen11 LFF HPE ML110 Gen11 LFF HPE ML110 Gen11 SFF
NHP CTO Server CTO Server CTO Server
SKU Number P51516-B21 P51517-B21 P51518-B21
Processor Sockets 1 Socket available
Processor Intel Fourth Generation Xeon® Scalable Processors
DIMM Slots 16 DIMM slots available
Storage Controller Embedded 8 SATA ports controller with Intel® VROC Hybrid RAID

Choice of HPE OCP-type RAID (OROC) and/or PCIe Standup controller card (s)
PCIe PCIe 5.0: 2 slots (x16), upgradable to 4 slots (x16)

OCP 3.0 with PCIe Gen 5.0: 1 slot (x16)

Drive Cage - 4 LFF NHP SATA Drive 4LFF SAS/SATA Drive 8SFF SAS/SATA Drive
included Cage Cage Cage
Additional drive Optional one 4 LFF NHP Optional one 4LFF or Optional one 8SFF
cages SATA Drive Cage kit 8SFF** SAS/SATA Drive SAS/SATA Drive Cage kit
Cage.
Notes: Mixing different
type Drive Cage with NHP
CTO server is not
supported.
ODD Optional, Up to 1
Half-Height RDX/LTO Optional, Up to 1

Notes: RDX Cable Kit (P53491-B21) or LTO Cable Kit (P62356-B21) is required.
Megacell Battery Optional
Network Controller Embedded 2-Port 1GbE BCM5720 networking ports.

Choice of HPE OCP-type networking adapter and/or PCIe Standup controller card
(s).
Redundant Fan Kit* 2 fans as standard. Optional Redundant Fan Kit (P49984-B21) provides advanced
cooling in heavier configurations and redundant functionality.
Power Supply HPE Flex Slot Hot Plug Power Supply Kit, up to 2
Management HPE iLO with Intelligent Provisioning (standard), iLO Advances and OneView
(optional), HPE GreenLake for Compute Ops Management (subscription included)
USB 5x USB 3.2 Gen1/2.0 ports, Plus front iLO Service Port
Tower-to-Rack Optional. Tower to Rack kit is not factory integratable option and will be shipped
conversion kit with standalone package.

Notes:

− * When one of the following scenarios occurs, Redundant Fan Kit (P49984-B21) is required.
Server with the following options installed:
ο SAS 15K RPM SFF HDD.
ο SAS4 SFF SSD.
ο HPE NS204i-u Gen11 NVMe Hot Plug Boot Optimized Storage Device.
ο GPU and accelerators
Server is required to continue operating with single fan failure. A flashing amber Health LED will indicate
this condition.
Server is required to operate with the A3/A4 extended operating environment with ambient temperature
35°C (95°F) to 45°C (113°F).

DA - 16305 Worldwide QuickSpecs — Version 26 — 4/7/2025 Page 31

QuickSpecs HPE ProLiant ML110 Gen11

Configuration Information
− ** Mixed LFF and SFF Drive cages can be supported in one system. Please select the LFF CTO Server
(P51517-B21) as the base configuration to start with.
− Refer to HPE Power Advisor Tool to review the power requirement for your selected configuration and
determine what power supply module(s) to select.
− All CTO servers are Energy Star 3.0 compliant. After January 11, 2024, Energy Star 3.0 compliance is no
longer valid. Energy Star 4.0 certification will be valid upon system configuration.

DA - 16305 Worldwide QuickSpecs — Version 26 — 4/7/2025 Page 32

QuickSpecs HPE ProLiant ML110 Gen11

Core Options

Step 2: Choose Required Options (only one of the following unless otherwise noted)

Step 2a: Choose Processors

Processor Option Kits - Intel Fourth Generation Xeon® Scalable Processors

Notes:

− DDR5 memory speed is the maximum memory speed of the processor. Actual memory speed
may depend on the quantity and type of DIMMs installed.
− 4800 MT/S maximum memory speed unless otherwise noted.
− 128GB SGX Enclave unless otherwise noted.
Intel Xeon-Gold Processors
Intel Xeon-Gold 6426Y 2.5GHz 16-core 185W Processor for HPE P49598-B21
Intel Xeon-Gold 6421N 1.8GHz 32-core 185W Processor for HPE P49641-B21
Notes: 4400 MT/s maximum memory speed.
Intel Xeon-Gold 5418N 1.8GHz 24-core 165W Processor for HPE P49640-B21
Notes: 4400 MT/s maximum memory speed.
Intel Xeon-Gold 5412U 2.1GHz 24-core 185W Processor for HPE P49618-B21
Notes: 4400 MT/s maximum memory speed.
Intel Xeon-Gold 5418Y 2.0GHz 24-core 185W Processor for HPE P49612-B21
Notes: 4400 MT/s maximum memory speed.
Intel Xeon-Gold 5416S 2.0GHz 16-core 150W Processor for HPE P49653-B21
Notes: 4000 MT/s maximum memory speed.
Intel Xeon-Gold 5411N 1.9GHz 24-core 165W Processor for HPE P49639-B21
Notes: 4400 MT/s maximum memory speed.
Intel Xeon-Gold 5415+ 2.9GHz 8-core 150W Processor for HPE P49597-B21
Notes: 4400 MT/s maximum memory speed.
Intel Xeon-Sliver Processors
Intel Xeon-Silver 4416+ 2.0GHz 20-core 165W Processor for HPE P49611-B21
Notes:

− 4000 MT/s maximum memory speed.

− 64GB SGX Enclave.
Intel Xeon-Silver 4410Y 2.0GHz 12-core 150W Processor for HPE P49610-B21
Notes:

− 4000 MT/s maximum memory speed.

− 64GB SGX Enclave.
Intel Xeon-Bronze Processors
Intel Xeon-Bronze 3408U 1.8GHz 8-core 125W Processor for HPE P49617-B21

DA - 16305 Worldwide QuickSpecs — Version 26 — 4/7/2025 Page 33

QuickSpecs HPE ProLiant ML110 Gen11

Core Options
Notes:

− 4000 MT/s maximum memory speed.

− 64GB SGX Enclave.
− Up to PCIe Gen4 supported.

Processor Option Kits - Intel Fourth Generation Xeon® Scalable Processors

Notes:

− DDR5 memory speed is the maximum memory speed of the processor. Actual memory speed
may depend on the quantity and type of DIMMs installed.
− 4800 MT/S maximum memory speed unless otherwise noted.
− 128GB SGX Enclave unless otherwise noted.
Intel Xeon-Gold Processors
Intel Xeon-Gold 5512U 2.1GHz 28-core 185W Processor for HPE P67101-B21
Intel Xeon-Gold 5515+ 3.2GHz 8-core 165W Processor for HPE P67079-B21
Intel Xeon-Sliver Processors
Intel Xeon-Silver 4516Y+ 2.2GHz 24-core 185W Processor for HPE P67093-B21
Notes:

− 4400 MT/S maximum memory speed.

− 64GB SGX Enclave.
Intel Xeon-Silver 4514Y 2.0GHz 16-core 150W Processor for HPE P67092-B21
Notes:

− 4400 MT/S maximum memory speed.

− 64GB SGX Enclave.
Intel Xeon-Silver 4510 2.4GHz 12-core 150W Processor for HPE P67091-B21
Notes:

− 4400 MT/S maximum memory speed.

− 64GB SGX Enclave.
− Intel VROC NVMe feature is not supported.
− 96GB DDR5-5600 DIMM is not supported.
Intel Xeon-Silver 4509Y 2.6GHz 8-core 125W Processor for HPE P67090-B21
Notes:

− 4400 MT/S maximum memory speed.

− 64GB SGX Enclave.
− Intel VROC NVMe feature is not supported.
− 96GB DDR5-5600 DIMM is not supported.
Intel Xeon-Bronze Processors
Intel Xeon-Bronze 3508U 2.1GHz 8-core 125W Processor for HPE P67100-B21
Notes:

− 4400 MT/s maximum memory speed.

DA - 16305 Worldwide QuickSpecs — Version 26 — 4/7/2025 Page 34

QuickSpecs HPE ProLiant ML110 Gen11

Core Options
− 64GB SGX Enclave.
− Intel VROC NVMe feature is not supported.
− Up to PCIe Gen4 supported.
− 96GB DDR5-5600 DIMM is not supported.

Step 2b: Choose Memory Options

Please select one or more memory from below.

For new Gen11 memory population rule whitepaper and optimal memory performance guidelines, please go to:

https://www.hpe.com/docs/memory-population-rules

For Gen11 memory speed table, please go to: https://www.hpe.com/docs/memory-speed-table

For memory Reliability, Accessibility, Serviceability (RAS) features whitepaper like Gen10 Fast Fault Tolerance
and legacy mirrored memory feature etc. please go to: https://www.hpe.com/psnow/doc/a50007802enw

Notes:

− The maximum memory speed and capacity is a function of the memory type, memory configuration, and
processor model.
− Quantity of memory DIMMs selected per socket must be 1, 2, 4, 6, 8, 12 or 16.
− For additional information, please see the HPE DDR5 Smart Memory QuickSpecs.
− For General Server Memory and Persistent Memory Population Rules and Guidelines, see details here:
http://www.hpe.com/docs/memory-population-rules
− HPE Server Memory compatibility for a specific server platform may vary or be limited within a server platform
depending upon the specific configuration being requested. Because each server environment and
requirements can vary, memory compatibility is based not only upon the server family, but may also be
affected by the amount and type of additional hardware options installed within a specific server configuration.
For this reason, some HPE memory DIMMs may be qualified for an HPE server model or family and yet
occasionally not be supported with some configurations within that server family.
− The new 5600 DIMMs are for the Fifth generation Intel Xeon® Scalable Processors; while the 4800 DIMMs are
for the Fourth generation Intel Xeon® Scalable Processors.

Memory - for the Fourth Generation Intel Xeon® Scalable Processors

Description
HPE 16GB (1x16GB) Single Rank x8 DDR5-4800 CAS-40-39-39 EC8 Registered Smart Memory Kit P43322-B21
HPE 32GB (1x32GB) Dual Rank x8 DDR5-4800 CAS-40-39-39 EC8 Registered Smart Memory Kit P43328-B21
HPE 64GB (1x64GB) Dual Rank x4 DDR5-4800 CAS-40-39-39 EC8 Registered Smart Memory Kit P43331-B21

Memory - for the Fifth Generation Intel Xeon® Scalable Processors

Description
HPE 16GB (1x16GB) Single Rank x8 DDR5-5600 CAS-46-45-45 EC8 Registered Smart Memory Kit P64705-B21
HPE 32GB (1x32GB) Dual Rank x8 DDR5-5600 CAS-46-45-45 EC8 Registered Smart Memory Kit P64706-B21
HPE 64GB (1x64GB) Dual Rank x4 DDR5-5600 CAS-46-45-45 EC8 Registered Smart Memory Kit P64707-B21
HPE 96GB (1x96GB) Dual Rank x4 DDR5-5600 CAS-46-45-45 EC8 Registered Smart Memory Kit P64708-B21

DA - 16305 Worldwide QuickSpecs — Version 26 — 4/7/2025 Page 35

QuickSpecs HPE ProLiant ML110 Gen11

Core Options
Notes: 96GB DDR5-5600 DIMM is not supported with 4510, 4509Y and 3508U processors.
Step 2c: Choose Power Supplies

Notes:

− Mixing 2 different power supplies is NOT supported.

− Selection of two HPE Flex Slot power supplies provide 1+1 power redundancy.
− To review the power requirements for your selected configuration, please use the HPE Power Advisor Tool.
Power Supplies
HPE 500W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit 865408-B21
HPE 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit P38995-B21
HPE 1000W Flex Slot Titanium Hot Plug Power Supply Kit P03178-B21
HPE 1600W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit P38997-B21
Notes: Only supports high line voltage (200 VAC to 240 VAC).

DA - 16305 Worldwide QuickSpecs — Version 26 — 4/7/2025 Page 36

QuickSpecs HPE ProLiant ML110 Gen11

Additional Options

Step 3: Choose Additional Factory Integratable Options

Some options may not be integrated at the factory. To ensure only valid configurations are ordered, Hewlett
Packard Enterprise recommends the use of an HPE approved configurator. Contact your local sales
representative for additional information.

Notes: The User Guide (UG) can help to explain the cable routing for each option.

Storage Devices

Storage Controllers

Notes:
− When selecting SR RAID controllers for external storage (E208e, 804398-B21) and MR RAID controllers
for internal storage(MR216i/MR416i/MR408i) in the order, please be aware these two products use
different RAID configuration tools.
− Not supporting mixing of MR (MegaRAID) series internal controllers and SR (SmartRAID) series internal
Controllers
− OCP-type RAID (OROC) controller is only supported on OCP 1 slot.
− OCP 1 enablement kit is not required for listed OROC controllers below.
− For more information on the HPE Gen11 Storage Controller, please refer to:
HPE Compute MR Gen11 Controllers QuickSpecs
HPE Compute SR Gen11 Controllers QuickSpecs

DA - 16305 Worldwide QuickSpecs — Version 26 — 4/7/2025 Page 37

 QuickSpecs HPE ProLiant ML110 Gen11

Additional Options

Essential RAID Controllers

HPE Smart Array E208e-p SR Gen10 (8 External Lanes/No Cache) 12G SAS PCIe Plug- 804398-B21
in Controller
Notes: This controller supports up to 8 SAS/SATA Drives (external)

For more information on the HPE Smart Array E208i-p SR Gen10 Controller, please refer
to the QuickSpecs

Tri-mode RAID Controllers

HPE MR216i-o Gen11 x16 Lanes without Cache OCP SPDM Storage Controller P47789-B21
Notes:
− Does not occupy a PCIe expansion slot.
− This controller supports up to 16 SAS/SATA/NVMe Drives with RAID 0/1/10.
HPE MR216i-p Gen11 x16 Lanes without Cache PCI SPDM Plug-in Storage P47785-B21
Controller
Notes: This controller supports up to 16 SAS/SATA/NVMe Drives with RAID
0/1/10.
HPE MR408i-o Gen11 x8 Lanes 4GB Cache OCP SPDM Storage Controller P58335-B21
Notes:
− Does not occupy a PCIe expansion slot.
− This controller supports up to 8 SAS/SATA/NVMe Drives
− HPE 96W Smart Storage Battery 260mm Cable (P01367-B21) OR HPE Smart
Hybrid Capacitor w/ 260mm Cable (P02381-B21) must be selected with this
controller.
HPE MR408i-p Gen11 x8 Lanes 4GB Cache PCI SPDM Plug-in Storage P74775-B21
Controller
Notes:
− This controller supports up to 8 SAS/SATA/NVMe Drives
− HPE 96W Smart Storage Battery 260mm Cable (P01367-B21) OR HPE Smart
Hybrid Capacitor w/ 260mm Cable (P02381-B21) must be selected with this
controller.
HPE MR416i-o Gen11 x16 Lanes 8GB Cache OCP SPDM Storage Controller P47781-B21
Notes:
− Does not occupy a PCIe expansion slot.
− This controller supports up to 16 SAS/SATA/NVMe Drives
− HPE 96W Smart Storage Battery 260mm Cable (P01367-B21) OR HPE Smart
Hybrid Capacitor w/ 260mm Cable (P02381-B21) must be selected with this
controller.
HPE MR416i-p Gen11 x16 Lanes 8GB Cache PCI SPDM Plug-in Storage P47777-B21
Controller
Notes:
− This controller supports up to 16 SAS/SATA/NVMe Drives
− HPE 96W Smart Storage Battery 260mm Cable (P01367-B21) OR HPE Smart
Hybrid Capacitor w/ 260mm Cable (P02381-B21) must be selected with this
controller.
Smart Storage Battery Cable Kits

DA - 16305 Worldwide QuickSpecs — Version 26 — 4/7/2025 Page 38

QuickSpecs HPE ProLiant ML110 Gen11

Additional Options
HPE 96W Smart Storage Lithium-ion Battery with 260mm Cable Kit P01367-B21
HPE Smart Storage Hybrid Capacitor with 260mm Cable Kit P02381-B21
Notes: The two 260mm cable kit can't be selected together.
Hybrid RAID
Notes:
− Requires UEFI, not supported on Legacy Mode.
− For NVMe SSDs only, no PCIe card support.
− Additional steps are required for OS installation with Intel VROC, please refer to
the link Intel Virtual RAID on CPU for HPE Gen11 User Guide - Installing
OS on the Intel VROC RAID
− Intel VROC NVMe feature is not supported with 4510, 4509Y and 3508U
processors.
Intel Virtual RAID on CPU RAID 1 FIO Software for HPE S3Q19A
Notes:
− Supports RAID 1
− ML110 Gen11 supports up to 2x M.2 NVMe drives on onboard slots with Intel
Virtual RAID on CPU RAID 1 (S3Q39AAE/S3Q19A).
Intel Virtual RAID on CPU RAID 1 E-RTU for HPE S3Q39AAE
Notes:
− Supports RAID 1
− Similar to Intel Virtual RAID on CPU Standard FIO Software for HPE (S3Q19A),
but intended for field deployments (BTO).
− ML110 Gen11 supports up to 2x M.2 NVMe drives on onboard slots with Intel
Virtual RAID on CPU RAID 1 (S3Q39AAE/S3Q19A).

Drive Cage
HPE ProLiant ML110 Gen11 4LFF Non-hot Plug Drive Cage Kit P53481-B21
Notes: Add additional 4 NHP LFF drive cage, allowing for up to 8 NHP LFF SATA
drive support (4+4).
HPE ProLiant ML110 Gen11 4LFF Drive Cage Kit P53482-B21
Notes: Add additional 4 LFF hot-plug drive cage, allowing for up to 8 LFF
SAS/SATA drive support (4+4).
HPE ProLiant ML110 Gen11 8SFF Drive Cage Kit P53483-B21
Notes: Add additional 8 SFF hot-plug drive cage, allowing for up to 16 SFF
SAS/SATA drive support (8+8).
Storage Controller Cables
HPE ProLiant ML110 Gen11 LFF PCIe Cable Kit P53484-B21
Notes: Select this cable kit to support p-type RAID controller with LFF drive cage.
HPE ProLiant ML110 Gen11 SFF OROC Cable Kit P53485-B21
Notes: Select this cable kit to support embedded or OCP-type (OROC) controller
with SFF drive cage.
HPE ProLiant ML110 Gen11 SFF PCIe Cable Kit P55859-B21
Notes: Select this cable kit to support p-type RAID controller with SFF drive cage.
Optical Drive
HPE 9.5mm SATA DVD-ROM Optical Drive 726536-B21
HPE 9.5mm SATA DVD-RW Optical Drive 726537-B21

DA - 16305 Worldwide QuickSpecs — Version 26 — 4/7/2025 Page 39

QuickSpecs HPE ProLiant ML110 Gen11

Additional Options
HPE Mobile USB DVD-RW Optical Drive 701498-B21

Riser Cards
HPE ProLiant ML110 Gen11 GPU Riser Kit P53487-B21
Notes:

− Add this riser kit to provide additional PCIe Gen5.0 x16 slot on slot 2.
− An additional PCIe adapter is recommended to be installed on slot 2 to get proper
thermal condition.
− When L4 GPU selected, this riser kit is required.
HPE ProLiant ML110 Gen11 Second GPU Riser Kit P53488-B21
Notes:

− Add this riser kit to provide additional PCIe Gen5.0 x16 slot on slot 3.
− When this Riser Kit is selected, HPE ProLiant ML110 Gen11 GPU Riser Kit
(P53487-B21) is required.

HPE Computation and Graphics Accelerators

Notes:

− System memory is recommended to be 2 times larger than the memory with accelerator card.
− Redundant Fan Kit (P49984-B21) is required for any accelerators.
− System fans may operate at higher speed and higher acoustic level to maintain optimum system cooling
condition with accelerator card.
− Mixing GPU types is not supported.
NVIDIA L4 24GB PCIe Accelerator for HPE S0K89C
Notes:

− This GPU requires Redundant Fan Kit (P49984-B21), GPU Riser Kit (P53487-B21), L4 GPU Support Kit
(P66618-B21) with 25°C maximum inlet temperature.
− The system supports up to 2x L4 GPUs and can be only installed in GPU Riser Kit. Second GPU Riser Kit
(P53488-B21) is required for additional L4 GPU.
− When this GPU selected, Processor is limited with up to 150W TDP.
HPE ProLiant ML110 Gen11 NVIDIA L4 GPU Support Kit P66618-B21
Notes:

− This support kit supports up to 2x L4 GPUs.

− Memory DIMM blanks within this support kit are required to be installed on all empty memory DIMM slots.
NVIDIA RTX 4000 Ada Graphics Accelerator for HPE S3T54C
Notes:

− This GPU requires Redundant Fan Kit (P49984-B21) and Cable Kit (P70544-B21).
− The system supports up to 2x RTX4000 Ada GPUs and can be installed on slot 1~3. GPU Riser Kit
(P53487-B21) and Second GPU Riser Kit (P53488-B21) may require for additional GPUs.
HPE ProLiant ML110 Gen11 8-pin/16-pin Cable Kit for NVIDIA GPU P70544-B21

DA - 16305 Worldwide QuickSpecs — Version 26 — 4/7/2025 Page 40

QuickSpecs HPE ProLiant ML110 Gen11

Additional Options
Notes:

− This cable kit supports up to 2x RTX4000 Ada GPUs.

HPE Drives

HPE Hard Disk Drives

Notes: System fans may operate at higher speed and higher acoustic level to maintain optimum
system cooling condition with SAS SFF drives. For noise-sensitive environment, recommend
to select SATA SFF SSD or SATA LFF drives in configuration or follow instructions in the
Customer Advisory to reduce drive qty in one drive cage.
Note Mission Critical - 12G SAS - SFF Drives SKU
HPE 300GB SAS 12G Mission Critical 10K SFF BC 3-year Warranty Multi Vendor HDD P40430-B21
HPE 600GB SAS 12G Mission Critical 10K SFF BC 3-year Warranty Multi Vendor HDD P53561-B21
HPE 1.2TB SAS 12G Mission Critical 10K SFF BC 3-year Warranty Multi Vendor HDD P28586-B21
HPE 1.8TB SAS 12G Mission Critical 10K SFF BC 3-year Warranty 512e Multi Vendor P53562-B21
HDD
HPE 2.4TB SAS 12G Mission Critical 10K SFF BC 3-year Warranty 512e Multi Vendor P28352-B21
HDD
Mission Critical - 12G SAS - SFF SED (Self-Encryption Drive)
HPE 1.2TB SAS 12G Mission Critical 10K SFF BC 3-year Warranty Self-encrypting P28622-B21
FIPS HDD
HPE 2.4TB SAS 12G Mission Critical 10K SFF BC 3-year Warranty 512e Self- P28618-B21
encrypting FIPS HDD
Business Critical - 12G SAS - LFF Drives
HPE 2TB SAS 12G Business Critical 7.2K LFF LP 1-year Warranty Multi Vendor HDD 833926-B21
HPE 4TB SAS 12G Business Critical 7.2K LFF LP 1-year Warranty Multi Vendor HDD 833928-B21
HPE 6TB SAS 12G Business Critical 7.2K LFF LP 1-year Warranty 512e Multi Vendor 861746-B21
HDD
HPE 8TB SAS 12G Business Critical 7.2K LFF LP 1-year Warranty 512e Multi Vendor 834031-B21
HDD
HPE 12TB SAS 12G Business Critical 7.2K LFF LP 1-year Warranty Helium 512e Multi 881781-B21
Vendor HDD
HPE 16TB SAS 12G Business Critical 7.2K LFF LP 1-year Warranty Helium 512e ISE P23608-B21
Multi Vendor HDD
HPE 20TB SAS 12G Business Critical 7.2K LFF LP 1-year Warranty Helium 512e ISE P53553-B21
Multi Vendor HDD
HPE 24TB SAS 12G Business Critical 7.2K LFF LP 1-year Warranty Helium 512e ISE P68583-B21
Multi Vendor HDD
Business Critical - 6G SATA - LFF Drives
HPE 1TB SATA 6G Business Critical 7.2K LFF LP 1-year Warranty Multi Vendor HDD 861686-B21
HPE 1TB SATA 6G Business Critical 7.2K LFF RW 1-year Warranty Multi Vendor HDD 801882-B21
HPE 2TB SATA 6G Business Critical 7.2K LFF LP 1-year Warranty Multi Vendor HDD 861681-B21
HPE 4TB SATA 6G Business Critical 7.2K LFF LP 1-year Warranty Multi Vendor HDD 861683-B21
HPE 4TB SATA 6G Business Critical 7.2K LFF RW 1-year Warranty Multi Vendor HDD 801888-B21
HPE 6TB SATA 6G Business Critical 7.2K LFF LP 1-year Warranty 512e Multi Vendor 861742-B21
HDD

DA - 16305 Worldwide QuickSpecs — Version 26 — 4/7/2025 Page 41

QuickSpecs HPE ProLiant ML110 Gen11

Additional Options
HPE 8TB SATA 6G Business Critical 7.2K LFF LP 1-year Warranty 512e Multi Vendor 834028-B21
HDD
HPE 12TB SATA 6G Business Critical 7.2K LFF LP 1-year Warranty Helium 512e Multi 881787-B21
Vendor HDD
HPE 16TB SATA 6G Business Critical 7.2K LFF LP 1-year Warranty Helium 512e ISE P23449-B21
Multi Vendor HDD
HPE 20TB SATA 6G Business Critical 7.2K LFF LP 1-year Warranty Helium 512e ISE P53554-B21
Multi Vendor HDD
HPE 24TB SATA 6G Business Critical 7.2K LFF LP 1-year Warranty Helium 512e ISE P68585-B21
Multi Vendor HDD

HPE Solid State Drives

Notes: System fans may operate at higher speed and higher acoustic level to maintain optimum system
cooling condition with SAS4 24G SFF SSD. For noise-sensitive environment, recommend to select SATA
SFF SSD or SATA LFF drives in configuration or follow instructions in the Customer Advisory to reduce
drive qty in one drive cage.

For SSD selection guidance, please visit https://ssd.hpe.com/

Note Read Intensive - 12G/24G SAS - SFF - Solid State Drives
HPE 960GB SAS 12G Read Intensive SFF BC Value SAS Multi P40506-B21
Vendor SSD
HPE 1.92TB SAS 12G Read Intensive SFF BC Value SAS Multi P40507-B21
Vendor SSD
HPE 3.84TB SAS 12G Read Intensive SFF BC Value SAS Multi P40508-B21
Vendor SSD
HPE 7.68TB SAS 12G Read Intensive SFF BC Value SAS Multi P40509-B21
Vendor SSD
2 HPE 960GB SAS 24G Read Intensive SFF BC Multi Vendor SSD P49029-B21
2 HPE 1.92TB SAS 24G Read Intensive SFF BC Multi Vendor SSD P49031-B21
1,2 HPE 3.84TB SAS 24G Read Intensive SFF BC Multi Vendor SSD P49035-B21
1,2 HPE 7.68TB SAS 24G Read Intensive SFF BC Multi Vendor SSD P49041-B21
1,2 HPE 15.36TB SAS 24G Read Intensive SFF BC Multi Vendor SSD P49045-B21
Mixed Use - 12G/24G SAS - SFF - Solid State Drives
HPE 960GB SAS 12G Mixed Use SFF BC Value SAS Multi Vendor P40510-B21
SSD
HPE 1.92TB SAS 12G Mixed Use SFF BC Value SAS Multi Vendor P40511-B21
SSD
HPE 3.84TB SAS 12G Mixed Use SFF BC Value SAS Multi Vendor P40512-B21
SSD
2 HPE 800GB SAS 24G Mixed Use SFF BC Multi Vendor SSD P49047-B21
2 HPE 1.6TB SAS 24G Mixed Use SFF BC Multi Vendor SSD P49049-B21
1,2 HPE 3.2TB SAS 24G Mixed Use SFF BC Multi Vendor SSD P49053-B21
1,2 HPE 6.4TB SAS 24G Mixed Use SFF BC Multi Vendor SSD P49057-B21
Read Intensive - 12G/24G SAS - SFF - SED (Self-Encryption Drive) Solid State
Drives
1,2 HPE 3.84TB SAS Read Intensive SFF BC Self-encrypting FIPS 140- P63875-B21
2 PM7 SSD

DA - 16305 Worldwide QuickSpecs — Version 26 — 4/7/2025 Page 42

QuickSpecs HPE ProLiant ML110 Gen11

Additional Options
Mixed Use - 12G/24G SAS - SFF - SED (Self-Encryption Drive) Solid State
Drives
1,2 HPE 1.6TB SAS Mixed Use SFF BC Self-encrypting FIPS 140-2 P63871-B21
PM7 SSD
Mixed Use -12G/24G SAS - LFF- Solid State Drives
HPE 960GB SAS 12G Mixed Use LFF LPC Value SAS Multi Vendor P37009-B21
SSD

Mixed Use - 6G SATA - SFF - Solid State Drives

HPE 480GB SATA 6G Mixed Use SFF BC Multi Vendor SSD P40502-B21
HPE 960GB SATA 6G Mixed Use SFF BC Multi Vendor SSD P40503-B21
HPE 1.92TB SATA 6G Mixed Use SFF BC Multi Vendor SSD P40504-B21
HPE 3.84TB SATA 6G Mixed Use SFF BC Multi Vendor SSD P40505-B21
Read Intensive - 6G SATA - SFF - Solid State Drives
HPE 240GB SATA 6G Read Intensive SFF BC Multi Vendor SSD P40496-B21
HPE 480GB SATA 6G Read Intensive SFF BC Multi Vendor SSD P40497-B21
HPE 960GB SATA 6G Read Intensive SFF BC Multi Vendor SSD P40498-B21
HPE 1.92TB SATA 6G Read Intensive SFF BC Multi Vendor SSD P40499-B21
HPE 3.84TB SATA 6G Read Intensive SFF BC Multi Vendor SSD P40500-B21
HPE 7.68TB SATA 6G Read Intensive SFF BC Multi Vendor SSD P40501-B21
HPE 480GB SATA 6G Read Intensive SFF BC PM893a SSD P63886-B21
HPE 3.84TB SATA 6G Read Intensive SFF BC PM893a SSD P63910-B21
Read Intensive - 6G SATA - LFF - Solid State Drives
HPE 960GB SATA 6G Read Intensive LFF LPC Multi Vendor SSD P47808-B21
Read Intensive - SATA - M.2 - Solid State Drives
3 HPE 480GB SATA 6G Read Intensive M.2 Multi Vendor SSD P47818-B21
Read Intensive - NVMe - M.2 - Solid State Drives
3 HPE 480GB NVMe Gen4 P69543-B21
Mainstream Performance Read
Intensive M.2 PM9A3 SSD
3 HPE 480GB NVMe Gen3 Mainstream Performance Read Intensive M.2 P40513-B21
Multi Vendor SSD
3 HPE 960GB NVMe Gen3 Mainstream Performance Read Intensive M.2 P40514-B21
Multi Vendor SSD
3 HPE 1.92TB NVMe Gen3 Mainstream Performance Read Intensive M.2 P40515-B21
Multi Vendor SSD

Notes:

1. SAS 15K RPM SFF HDD and SAS4 SFF SSD drives which consume power equal to or higher
than 15W are limited to 25°C maximum inlet temperature.

2. Redundant Fan Kit (P49984-B21) is required for SAS 15K SFF HDD and SAS4 SFF SSD.

3. Mixing of SATA M.2 and NVMe M.2 SSDs is not allowed.

DA - 16305 Worldwide QuickSpecs — Version 26 — 4/7/2025 Page 43

QuickSpecs HPE ProLiant ML110 Gen11

Additional Options
Networking
Notes:

− High performance networking cards equal or greater than 100Gb that may cause the fans to operate at
higher speed and higher acoustic level to maintain optimum system cooling when system at idle status.
− Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic
environments must be purchased separately. Please see the related NIC QuickSpecs for Technical
Specifications and additional information:
https://h20195.www2.hpe.com/v2/getpdf.aspx/A00002507ENW.

PCIe Adapters

1 Gigabit Ethernet adapters

Broadcom BCM5719 Ethernet 1Gb 4-port BASE-T Adapter P51178-B21
for HPE
Intel I350-T4 Ethernet 1Gb 4-port BASE-T Adapter for HPE P21106-B21

10 Gigabit Ethernet adapters

Broadcom BCM57416 Ethernet 10Gb 2-port BASE-T Adapter for P26253-B21
HPE
Broadcom BCM57412 Ethernet 10Gb 2-port SFP+ Adapter for P26259-B21
HPE
10/25 Gigabit Ethernet adapters
Broadcom BCM57414 Ethernet 10/25Gb 2-port SFP28 Adapter for P26262-B21
HPE
Intel E810-XXVDA2 Ethernet 10/25Gb 2-port SFP28 Adapter for HPE P08443-B21
Mellanox MCX631102AS-ADAT Ethernet 10/25Gb 2-port SFP28 P42044-B21
Adapter for HPE
Intel E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 Adapter for HPE P08458-B21
100 Gigabit Ethernet adapters
Intel E810-CQDA2 Ethernet 100Gb 2-port QSFP28 Adapter for HPE P21112-B21
OCP Adapter

1 Gigabit Ethernet OCP adapters

Broadcom BCM5719 Ethernet 1Gb 4-port BASE-T OCP3 Adapter for HPE P51181-B21
Intel I350-T4 Ethernet 1Gb 4-port BASE-T OCP3 Adapter for HPE P08449-B21
10 Gigabit Ethernet OCP Adapters
Broadcom BCM57412 Ethernet 10Gb 2-port SFP+ OCP3 Adapter for HPE P26256-B21
Broadcom BCM57416 Ethernet 10Gb 2-port BASE-T OCP3 Adapter for
HPE P10097-B21
10/25 Gigabit Ethernet OCP adapters
Intel E810-XXVDA2 Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter for HPE P10106-B21
Mellanox MCX631432AS-ADAI Ethernet 10/25Gb 2-port SFP28 OCP3
Adapter for HPE P42041-B21

DA - 16305 Worldwide QuickSpecs — Version 26 — 4/7/2025 Page 44

QuickSpecs HPE ProLiant ML110 Gen11

Additional Options
Broadcom BCM57414 Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter for
HPE P10115-B21
Broadcom BCM57504 Ethernet 10/25Gb 4-port SFP28 OCP3 Adapter for
HPE P26269-B21
100 Gigabit Ethernet adapters
Intel E810-CQDA2 Ethernet 100Gb 2-port QSFP28 OCP3 Adapter for HPE P22767-B21

OS Boot Device
HPE NS204i-u Gen11 NVMe Hot Plug Boot Optimized Storage Device P48183-B21
Notes:

− When NS204i-u is selected, Redundant Fan Kit (P49984-B21) is required.

− When NS204i-u is selected, embedded controller for SATA drive is not available.
− NS204i-u is not supported with NHP CTO server.
− System fans may operate at higher speed and higher acoustic level to maintain optimum system cooling
condition while NS204i-u is installed.
− In order to optimize acoustic level, please consider onboard M.2 drives as boot device in configuration.
HPE ProLiant ML110 Gen11 NS204i-u Enablement Kit P61742-B21
Notes: When NS204i-u is selected, this Enablement Kit is required.

Accessories
HPE ProLiant ML110 Gen11 Serial Port Cable Kit P53489-B21

Security Options
HPE ProLiant Compute ML Gen11/Gen12 Intrusion Cable Kit P47226-B21

Power and Cooling

Cooling Options
HPE ProLiant ML110 Gen11 Redundant Fan Kit P49984-B21
Notes: When one of the following scenarios occurs, Redundant Fan Kit (P49984-B21) is required.

− Server with the following options installed:

ο SAS 15K RPM SFF HDD.
ο SAS4 SFF SSD.
ο HPE NS204i-u Gen11 NVMe Hot Plug Boot Optimized Storage Device.
ο GPU and accelerators
− Server is required to continue operating with single fan failure. A flashing amber Health LED will indicate
this condition.
− Server is required to operate with the A3/A4 extended operating environment with ambient temperature
35°C (95°F) to 45°C (113°F).
Power Suppliers
HPE Flexible Slot (Flex Slot) Power Supplies share a common electrical and physical design that allows for

DA - 16305 Worldwide QuickSpecs — Version 26 — 4/7/2025 Page 45

QuickSpecs HPE ProLiant ML110 Gen11

Additional Options
hot plug, tool-less installation into HPE ProLiant Servers. Flex Slot power supplies are certified for high-
efficiency operation and offer multiple power output options, allowing users to "right-size" a power supply for
specific server configurations. This flexibility helps to reduce power
waste, lower overall energy costs, and avoid "trapped" power capacity in the data center.

Notes:

− Prior to making a power supply selection it is highly recommended that the HPE Power Advisor Tool is
run to determine the right size power supply for your server configuration.
− Visit HPE Power Cords and Cables for a full list of optional power cords.
− Flex Slot Platinum power supplies support power efficiency of up to 94% and include a standard C-14
power inlet connector.
− Flex Slot Titanium power supplies support power efficiency of up to 96% and include a standard C-14
power inlet connector.
HPE 500W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit 865408-B21
HPE 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit P38995-B21
HPE 1000W Flex Slot Titanium Hot Plug Power Supply Kit P03178-B21
HPE 1600W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit P38997-B21
Notes: Only supports high line voltage (200 VAC to 240 VAC).

Storage Backup
For the complete range of tape drives, autoloaders, libraries and media see:
https://www.hpe.com/us/en/storage/storeever-tape-storage.html.
For hardware and software compatibility of Hewlett Packard Enterprise tape backup products
http://www.hpe.com/storage/BURAcompatibility.

Notes:

− When an internal RDX docking station selected, HPE ProLiant ML110 Gen11 RDX Cable Kit (P53491-
B21) is required.
− When an internal LTO tape drive selected, HPE ProLiant ML110 Gen11 LTO Cable Kit (P62356-B21) and
one available port from MR216-o/p or MR408i-o storage controller is required.
− Support up to one RDX internal docking station or internal LTO tape drive in media bay.
− Required to change Thermal Configuration to Increased Cooling mode in BIOS/Platform Configuration
(RBSU) menu and system fans may operate at higher speed and higher acoustic level.
HPE Tape Drives
HPE StoreEver LTO-8 Ultrium 30750 External Tape Drive BC023A
HPE StoreEver LTO-9 Ultrium 45000 External Tape Drive BC042A
HPE StoreEver LTO-7 Ultrium 15000 External Tape Drive BB874A
HPE StoreEver LTO-9 Ultrium 45000 Internal Tape Drive BC040A
HPE StoreEver LTO-8 Ultrium 30750 Internal Tape Drive BC022A
HPE StoreEver LTO-8 Ultrium 30750 TAA-compliant SAS Internal Tape Drive BC024A
HPE LTO-7 Ultrium 15000 Internal Tape Drive BB873A
HPE StoreEver LTO-7 Ultrium 15000 TAA-compliant Internal Tape Drive BB953A
Internal LTO Support Kit
HPE ProLiant ML110 Gen11 LTO Cable Kit P62356-B21

DA - 16305 Worldwide QuickSpecs — Version 26 — 4/7/2025 Page 46

QuickSpecs HPE ProLiant ML110 Gen11

Additional Options
Notes: Supporting cables to add internal LTO device for data backup or archiving.
HPE Tape Drives Cartridge
HPE LTO-6 Ultrium 6.25TB RW Data Cartridge C7976A
HPE LTO-7 Ultrium 15TB RW Data Cartridge C7977A
HPE LTO-8 Ultrium 30TB RW Data Cartridge Q2078A
HPE LTO-9 Ultrium 45TB RW Data Cartridge Q2079A
HPE Tape Backup Products
HPE StoreEver Mini-SAS High Density to 4-lane Mini-SAS External Fanout 2m Cable K2R09A
HPE StoreEver Mini-SAS High Density to 4-lane Mini-SAS External Fanout 4m Cable K2R10A
Internal RDX Support Kit
HPE ProLiant ML110 Gen11 RDX Cable Kit P53491-B21
Notes: Supporting cables to add internal RDX device for data backup or archiving.

HPE Racks
Please see the HPE Advanced Series Racks QuickSpecs for information on additional racks options
and rack specifications. HPE G2 Advanced Series Racks
Please see the HPE Enterprise Series Racks QuickSpecs for information on additional racks options
and rack specifications. HPE G2 Enterprise Series Racks

HPE Power Distribution Units (PDUs)

Please see the HPE Basic Power Distribution Units (PDU) QuickSpecs for information on these
products and their specifications.
Please see the HPE Metered Power Distribution Units (PDU) QuickSpecs for information on these
products and their specifications.
Please see the HPE Intelligent Power Distribution Unit (PDU) QuickSpecs for information on these
products and their specifications.
Please see the HPE Metered and Switched Power Distribution Units (PDU) QuickSpecs for
information on these products and their specifications.

HPE Uninterruptible Power Systems (UPS)

To learn more, please visit the HPE Uninterruptible Power Systems (UPS) web page.
Please see the HPE DirectFlow Three Phase Uninterruptible Power System QuickSpecs for
information on these products and their specifications.
Please see the HPE Line Interactive Single Phase UPS QuickSpecs for information on these
products and their specifications.
HPE T750 Gen5 NA/JP UPS with Management Card Slot Q1F47A
HPE T750 Gen5 INTL UPS with Management Card Slot Q1F48A
HPE T1000 Gen5 NA/JP UPS with Management Card Slot Q1F49A
HPE T1000 Gen5 INTL UPS with Management Card Slot Q1F50A

DA - 16305 Worldwide QuickSpecs — Version 26 — 4/7/2025 Page 47

QuickSpecs HPE ProLiant ML110 Gen11

Additional Options
HPE T1500 Gen5 NA/JP UPS with Management Card Slot Q1F51A
HPE T1500 Gen5 INTL UPS with Management Card Slot Q1F52A

HPE Rack Options

Please see the HPE KVM Switches web page for information on these products and their specifications.

Rail Kits
HPE ProLiant Compute ML Gen11/Gen12 Tower to Rack Conversion Kit P47394-B21
Notes:

− Easy install rack rail tray which takes up 1U height in a standard rack facility with CMA can only be
shipped as standalone option package. This kit is supported in both ML350 and ML110 Gen11 for tower
to rack conversion.
− HPE rail kits are designed to work with HPE racks in compliance with industry standard EIA-310-E. In the
event a customer elects to purchase a third-party rack for use with an HPE rail kit, any such use is at
customer's own risk. HPE makes no express or implied warranties with respect to such third-party racks
and specifically disclaims any implied warranties of merchantability and fitness for a particular purpose.
Furthermore, HPE has no obligation and assumes no liability for the materials, design, specifications,
installation, safety, and compatibility of any such third-party racks with any rail kits, including HPE rail
kits.

HPE Compute Ops Management

Base SKU
HPE Compute Ops Management Enhanced 3-year Upfront ProLiant SaaS R7A11AAE
Upgrade SKUs
HPE Compute Ops Management Enhanced 5-year Upfront ProLiant SaaS R7A12AAE
HPE Compute Cloud Management Server FIO Enablement S1A05A
HPE Compute Ops Management Advanced 1-year Upfront ProLiant SaaS S5E58AAE
HPE Compute Ops Management Advanced 3-year Upfront ProLiant SaaS S5E59AAE
HPE Compute Ops Management Advanced 5-year Upfront ProLiant SaaS S5E60AAE
HPE Compute Ops Management Advanced 7-year Upfront ProLiant SaaS S5E61AAE

For more information, visit the HPE GreenLake for Compute Ops Management
QuickSpecs: https://www.hpe.com/psnow/doc/a50004263enw

Supported Servers - CTO only. No OEM. - Complete list can be found here:
Latest Supported Server List: https://www.hpe.com/info/com-supported-
servers

DA - 16305 Worldwide QuickSpecs — Version 26 — 4/7/2025 Page 48

QuickSpecs HPE ProLiant ML110 Gen11

Additional Options
Converged Infrastructure Management Software
HPE OneView
HPE OneView including 3yr 24x7 Support Flexible Quantity E-LTU E5Y35AAE
HPE OneView w/o iLO including 3yr 24x7 Support Flexible Quantity E-LTU P8B26AAE

Insight Software
HPE iLO Advanced
HPE iLO Advanced Electronic License with 1yr Support on iLO Licensed Features E6U59ABE
HPE iLO Advanced Electronic License with 3yr Support on iLO Licensed Features E6U64ABE
HPE iLO Advanced 1-server License with 3yr Support on iLO Licensed Features BD505A
HPE iLO Advanced AKA Tracking License with 3yr Support on iLO Licensed Features BD507A
HPE iLO Advanced 1-server License with 1yr Support on iLO Licensed Features 512485-B21
HPE iLO Advanced AKA Tracking License with 1yr Support on iLO Licensed Features 512487-B21
Factory Configuration Settings
HPE iLO Common Password FIO Setting P08040-B21
Notes:

− Replaces iLO default randomized password by an HPE defined common password. HPE
highly
recommends changing this password immediately after the initial onboarding process.
− Customers who want to choose their own custom iLO default password should use the HPE
Factory Express Integration Services.

DA - 16305 Worldwide QuickSpecs — Version 26 — 4/7/2025 Page 49

QuickSpecs HPE ProLiant ML110 Gen11

Memory

Memory Population guidelines

HPE ML110 Gen11 Server (Front of server)

Notes: 2 Slots per channel

HPE ProLiant ML110 Gen11 Servers 16 slots per CPU DIMM population order
1 DIMM 10
2 DIMMs2 3 10
4 DIMMs2 3 7 10 14
6 DIMMs 3 5 7 10 14 16
8 1 3 5 7 10 12 14 16
DIMMs1,2
12 DIMMs 1 2 3 5 6 7 10 11 12 14 15 16
16 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
DIMMs1,2
Notes:

− 1. Support SGX (Software Guard Extensions)

− 2 Support Hemi (hemisphere mode)

General Memory Population Rules and Guidelines:

Install DIMMs only if the corresponding processor is installed. If only one processor is installed in a 2-
processor system, only half of the DIMM slots are available to populate.
If a memory channel consists of more than one DIMM slot, the white DIMM slot is located furthest from the
CPU. White DIMM slots denote the first slot to be populated in a channel. For one DIMM per channel (DPC),
populate white DIMM slots only
Rank mixing is not allowed on a channel except for 1 rank + 2 rank combination when all 16 DIMMs for a
Processor socket is populated. (2 rank in white slot, 1 rank in block slot),
No x4 mixing with x8 across a socket.
If multiple CPUs are populated, split the HPE Smart Memory DIMMs evenly across the CPUs and follow the
corresponding CPU rules when populating DIMMs.
To maximize performance, it is recommended to balance the total memory capacity across all installed
processors and load the channels similarly whenever possible.

DA - 16305 Worldwide QuickSpecs — Version 26 — 4/7/2025 Page 50

QuickSpecs HPE ProLiant ML110 Gen11

Memory
If the number of DIMMs does not spread evenly across the CPUs, populate as close to evenly as possible.
Avoid creating an unbalanced configuration for any CPU.
The maximum memory capacity is a function of the number of DIMM slots on the platform-the largest DIMM
capacity qualified on the platform and the number and model of qualified processors installed on the
platform.
Do not mix HPE Smart Memory RDIMMs and HPE Smart Memory LRDIMMs in the same system.
Rank mixing is not allowed on a channel except for 1 rank + 2 rank combination (2 rank in white slot, 1 rank
in block slot), when all 16 DIMMs for a Processor socket is populated.
The 256 GB 8R 3DS RDIMM can be mixed with 128 GB 4R 3DS RDIMM ONLY in 16 DIMMs populated. 256
GB 8R 3DS RDIMM needs to be in white slot while 128 GB 4R 3DS RDIMM needs to be in black slot.
The maximum memory speed is a function of the memory type, memory configuration, and processor model.
DIMMs of different speeds may be mixed in any order; however, the server will select the lowest common
speed among all of the DIMMs on all of the CPUs.
HPE Smart Memory DIMMs and HPE NVDIMM-Ns from previous generation servers are not compatible with
the current generation. Certain HPE Smart Memory features such as memory authentication and enhanced
performance may not be supported.
There are no performance implications for mixing sets of different capacity DIMMs at the same operating
speed. For example, latency and throughput will not be negatively impacted by installing an equal number of
32 GB 1rank x4 DDR5-4800 DIMMs (in block slot) and 64 GB 2rank x4 DDR5-4800 DIMMs (in white slot).
Take each DIMM type and create a configuration as if it were a homogeneous configuration.
For details on the HPE Server Memory Options Population Rules, visit:
http://www.hpe.com/docs/memory-population-rules.

For additional information, please see the HPE DDR5 Smart Memory QuickSpecs.

Notes: The maximum memory speed is a function of the memory type, memory configuration, and processor
model.

For details on the HPE Server Memory speed, visit: https://www.hpe.com/docs/server-memory.

DA - 16305 Worldwide QuickSpecs — Version 26 — 4/7/2025 Page 51

QuickSpecs HPE ProLiant ML110 Gen11

Storage

8 NHP LFF drive model 8 LFF hot-plug drive model 16 SFF hot-plug drive model

Tower - shown with tower feet. Tower - shown with tower feet. Tower - shown with tower feet.

2 x 4LFF NHP SATA Drive 2 x 4LFF SAS/SATA hot- 2 x 8SFF SAS/SATA hot-
Cage Kit in Box 1/2. pluggable Drive Cage Kit in pluggable Drive Cage Kit in
Internal RDX Docking Box 1/2. Box 1/2.
station. Internal RDX Docking Internal RDX Docking
station. station.

DA - 16305 Worldwide QuickSpecs — Version 26 — 4/7/2025 Page 52

QuickSpecs HPE ProLiant ML110 Gen11

Technical Specifications

System Unit

Dimensions

Tower
46.2 (H) x 58.7 (D) x 19.5 (W) cm
18.19 (H) x 23.1 (D) x 7.68 (W) in

Rack - System only

19.5 (H/4.5U) x 58.7 (D) x 44.5 (W) cm
7.68 (H) x 23.1 (D) x 17.5 (W) in

Tower-to-Rack Conversion Kit (1U)

4.445 (H/1U) x 69.2 (D/without CMA. Depth with CMA: 83.5) x 45.2 (W) cm
1.75 (H/1U) x 27.23 (D/without CMA. Depth with CMA: 32.89) x 17.795 (W) in

Weight (approximate)

20.1 kg (44.31 lb.)

SFF Minimum:
1x 8SFF cage with 1x SFF HDD and 7x SFF HDD blanks, 1x Drive Cage blank, 1x Media Bay blanks, 1x
DVD bay blank, 1x processor including standard heatsink, 1x DIMM, 1x power supply (plus blank), 1x x8
HHHL card (Max. 166g), 1x OCP blanks, 1x GPU Riser Cage blank, Cables for the above.

30.3 kg (66.8 lb.)

SFF Maximum:
16x SFF HDDs with 2x SFF Drive cages, 1x DVD device, 1x processor including standard heatsink, 16x
DIMMs, 2x power supply, 1x GPU riser cage, 1x Megacell, 1x OCP, 2x Single Width x16 GPU card, 2x
x8 HHHL card (Max. 166g), Cables for the above.

20.4 kg (44.97 lb.)

LFF Minimum:
1x 4LFF cage with 1x LFF HDD and 3x HDD blanks, 1x Drive Cage blank, 1x Media Bay blanks, 1x DVD
bay blank, 1x processor including standard heatsink, 1x DIMM, 1x power supply (plus blank), 1x x8
HHHL card (Max. 166g), 1x Megacell, 1x OCP blanks, 1x GPU Riser Cage blank, Cables for the above.

33.2 kg (73.19 lb.)

LFF Maximum:
8x LFF HDDs with 2x LFF Drive Cage, 1x DVD device, 1x processor including standard heatsink, 16x
DIMMs, 2x power supply, 1x GPUI Riser Cage, 1x Megacell, 1x OCP, 2x Single Width x16 GPU card,
2x x8 HHHL card (Max. 166g), 1x NS204i-u, Cables for the above.

Input Requirements (per power supply)

Rated Line Voltage

100 to 120 VAC

200 to 240 VAC

BTU Rating

DA - 16305 Worldwide QuickSpecs — Version 26 — 4/7/2025 Page 53

QuickSpecs HPE ProLiant ML110 Gen11

Technical Specifications
Maximum

For 500W Power Supply: 1902 BTU/hr. (at 100 VAC), 1840 BTU/hr. (at 200 VAC), 1832 BTU/hr. (at
240 VAC)
For 800W Power Supply: 3067 BTU/hr. (at 100 VAC), 2958 BTU/hr. (at 200 VAC), 2949 BTU/hr. (at
240 VAC)
For 1000W Power Supply: 3741 BTU/hr. (at 100 VAC), 3596 BTU/hr. (at 200 VAC), 3582 BTU/hr. (at
240 VAC)
For 1600W Power Supply: 5918 BTU/hr. (at 200 VAC), 5884 BTU/hr. (at 240 VAC)

Power Supply Output (per power supply)

Rated Steady-State Power
For 1600W (Titanium) Power Supply: 1600W (at 240 VAC), 1600W (at 240 VDC) for China only
For 1000W (Titanium) Power Supply: 1000W (at 100 VAC), 1000W (at 240 VAC)
For 800W (Platinum) Power Supply: 800W (at 100 VAC), 800W (at 240 VAC), 800W (at 240 VDC)
input for China only
For 500W (Platinum) Power Supply: 500W (at 100 VAC), 500W (at 240 VAC), 500W (at 240 VDC)
input for China only
Maximum Peak Power
For 1600W (Titanium) Power Supply: 1600W (at 240 VAC), 1600W (at 240 VDC) for China only
For 1000W (Titanium) Power Supply: 1000W (at 100 VAC), 1000W (at 240 VAC)
For 800W (Platinum) Power Supply: 800W (at 100 VAC), 800W (at 240 VAC), 800W (at 240 VDC)
input for China only
For 500W (Platinum) Power Supply: 500W (at 100 VAC), 500W (at 240 VAC), 500W (at 240 VDC)
input for China only

System Inlet Temperature

Standard Operating Temperature
10° to 35°C (50° to 95°F) at sea level with an altitude derating of 1.0°C per every 305 m (1.8°F per every
1000 ft.) above sea level to a maximum of 3050 m (10,000 ft.), no direct sustained sunlight. Maximum
rate of change is 20°C/hr. (36°F/hr.). The upper limit and rate of change may be limited by the type and
number of options installed.
System performance during standard operating support may be reduced if operating with a fan fault or
above 30°C (86°F).

Extended Ambient Operating Temperature

For approved hardware configurations, the supported system inlet range is extended to be: 5° to 10°C (41°
to 50°F) and 35° to 40°C (95° to 104°F) at sea level with an altitude derating of 1.0°C per every 175 m
(1.8°F per every 574 ft.) above 900 m (2953 ft.) to a maximum of 3050 m (10,000 ft.). The approved
hardware configurations for this system are listed at the
URL:https://www.hpe.com/support/ASHRAEGen11
For approved hardware configurations, the supported system inlet range is extended to be: 40° to 45°C
(104° to 113°F) at sea level with an altitude derating of 1.0°C per every 125 m (1.8°F per every 410 ft.)
above 900 m (2953 ft.) to a maximum of 3050 m (10,000 ft.). The approved hardware configurations for
this system are listed at the URL:https://www.hpe.com/support/ASHRAEGen11
System performance may be reduced if operating in the extended ambient operating range or with a fan
fault.

DA - 16305 Worldwide QuickSpecs — Version 26 — 4/7/2025 Page 54

QuickSpecs HPE ProLiant ML110 Gen11

Technical Specifications
Non-operating
-30° to 60°C (-22° to 140°F). Maximum rate of change is 20°C/hr. (36°F/hr.).

Relative Humidity (non-condensing)

Operating
8% to 90% - Relative humidity (Rh), 28°C maximum wet bulb temperature, non-condensing.

Non-operating
5 to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum wet bulb temperature, non-condensing.

Altitude
Operating
3050 m (10,000 ft.). This value may be limited by the type and number of options installed. Maximum
allowable altitude change rate is 457 m/min (1500 ft./min).

Non-operating
9144 m (30,000 ft.). Maximum allowable altitude change rate is 457 m/min (1500 ft./min).

Emission Classification (EMC) Regulatory Information

To view the regulatory information for your product, view the Safety and Compliance Information for Server,
Storage, Power, Networking, and Rack Products, available at the Hewlett Packard Enterprise Support Center:

https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=c03471072

Environment-friendly Products and Approach End-of-life Management and Recycling

Hewlett Packard Enterprise offers end-of-life product return, trade-in, and recycling programs, in many
geographic areas, for our products. Products returned to Hewlett Packard Enterprise will be recycled,
recovered or disposed of in a responsible manner.

The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each
product type for use by treatment facilities. This information (product disassembly instructions) is posted on
the Hewlett Packard Enterprise web site. These instructions may be used by recyclers and other WEEE
treatment facilities as well as Hewlett Packard Enterprise OEM customers who integrate and re-sell Hewlett
Packard Enterprise equipment.

Acoustic Noise
Listed are the declared mean A-Weighted sound power levels (LwAm), declared average bystander position
A-Weighted sound pressure levels (LpAm) and the statistical adder for verification, Kv, is a quantity to be
added to the declared mean A-weighted sound power level, LwA,m when the product is operating in a 23°C
ambient environment. Noise emissions were measured in accordance with ISO 7779 (ECMA 74) and
declared in accordance with ISO 9296 (ECMA 109). The listed sound levels apply to standard shipping
configurations. Additional options may result in increased sound levels. Please have your HPE representative

DA - 16305 Worldwide QuickSpecs — Version 26 — 4/7/2025 Page 55

QuickSpecs HPE ProLiant ML110 Gen11

Technical Specifications
provide information from the HPE EMESC website for further technical details regarding the configurations
listed below.

Test Case Entry LFF Entry LFF Entry SFF Base SFF Performance SFF Model
Model Model Model Model
Idle
LwA,m 3.7 B 3.7 B 3.7 B 3.7 B 3.7 B
LpAm 22 dBA 22 dBA 22 dBA 22 dBA 22 dBA
Kv 0.4 B 0.4 B 0.4 B 0.4 B 0.4 B
Operating
LwA,m 3.8 B 3.8 B 3.8 B 4.7 B 5.0 B
LpAm 24 dBA 24 dBA 24 dBA 31 dBA 37 dBA
Kv 0.4 B 0.4 B 0.4 B 0.4 B 0.4 B

Notes:
− The declared mean A-weighted sound power level, LWA,m, is computed as the arithmetic average of the
measured.
− A-weighted sound power levels for a randomly selected sample, rounded to the nearest 0,1 B.
− The declared mean A-weighted emission sound pressure level, LpA,m, is computed as the arithmetic
average of the measured A-weighted emission sound pressure levels at the bystander positions for a
randomly selected sample, rounded to the nearest 1 dB.
− The statistical adder for verification, Kv, is a quantity to be added to the declared mean A-weighted sound
power level, LWA,m, such that there will be a 95 % probability of acceptance, when using the verification
procedures of ISO 9296, if no more than 6,5 % of the batch of new equipment, has A-weighted sound
power levels greater than (LWA,m + Kv).
− The quantity, LWA,c (formerly called LwA,m), can be computed from the sum of LWA,m and Kv.
− All measurements made to conform to ISO 7779 / ECMA-74 and declared to conform to ISO 9296 / ECMA-
109.
− B, dB, abbreviations for bels and decibels, respectively, where 1 B = 10 dB.
− The results in this declaration apply only to the model numbers listed above when operating and tested
according to the indicated modes and standards. A system with additional configuration components or
increased operating functionality may increase the noise emission values.
− System under abnormal conditions may increase the noise level, persons in the vicinity of the product
[cabinet] for extended periods of time should consider wearing hearing protection or using other means to
reduce noise exposure.

DA - 16305 Worldwide QuickSpecs — Version 26 — 4/7/2025 Page 56

QuickSpecs HPE ProLiant ML110 Gen11

Summary of Changes

Date Version History Action Description of Change

07-Apr-2025 Version 24 Changed Additional Options section was updated.

Added: Tri-mode RAID Controller SKU, COM Advanced

SKUs and QuickSpecs Survey.

Removed: HPE RDX Products SKUs.

03-Mar-2025 Version 23 Changed Additional Options section was updated.
03-Feb-2025 Version 22 Changed Standard Features, Pre-Configured Models, Configuration
Information, and Additional Options sections were updated.

OBS SKU was removed.

Intel VROC Software RAID naming changed to Hybrid

RAID.
02-Dec-2024 Version 21 Changed Additional Options section was updated.
04-Nov-2024 Version 20 Changed Overview, Configuration Information and Additional Options
sections were updated. (Internal LTO tape drive)
03-Sep-2024 Version 19 Changed Overview, Standard Features (Operating Systems and
Virtualization Software Support for HPE Servers), Pre-
Configured Models and Additional Options sections were
updated.
05-Aug-2024 Version 18 Changed Standard Features and Additional Options sections were
updated.
15-Jul-2024 Version 17 Changed Pre-Configured Models section was updated.
01-Jul-2024 Version 16 Changed Overview, Standard Features, Pre-Configured Models and
Additional Options sections were updated.
03-Jun-2024 Version 15 Changed Pre-Configured Models, Configuration Information and
Additional Options sections were updated.
06-May-2024 Version 14 Changed Additional Options section was updated.
01-Apr-2024 Version 13 Changed Overview, Standard Features, Pre-Configured Models,
Configuration Information and Additional Options sections
were updated.
18-Mar-2024 Version 12 Changed Pre-Configured Models section was updated.
04-Mar-2024 Version 11 Changed Pre-configured SKUs, Drive and UPS options were
updated.
05-Feb-2024 Version 10 Changed Drive options were updated.
08-Jan-2024 Version 9 Changed Energy Star 4.0 information and 96GB 5600 memory
support limitation were updated.
14-Dec-2023 Version 8 Changed Intel 5th Gen processors and 5600 memory options were
updated
13-Nov-2023 Version 7 Changed New Pre-Configured SKU was updated
06-Nov-2023 Version 6 Changed Optimize Configuration content, add new options support.
05-Sep-2023 Version 5 Changed Optimize Configuration content, add new Lot 9 required
statements and update options sections.
17-Jul-2023 Version 4 Changed Configuration Information section was updated
10-Jul-2023 Version 3 Changed Standard Features, Pre-Configured Models, Configuration
Information and Core Options sections were updated
05-Jun-2023 Version 2 Changed Pre-Configured Models, Configuration Information and Core
Options sections were updated.
01-May-2023 Version 1 New New QuickSpecs.

DA - 16305 Worldwide QuickSpecs — Version 26 — 4/7/2025 Page 57

QuickSpecs HPE ProLiant ML110 Gen11

Copyright
Make the right purchase
decision. Contact our
presales specialists.

© Copyright 2025 Hewlett Packard Enterprise Development LP. The information contained
herein is subject to change without notice. The only warranties for Hewlett Packard
Enterprise products and services are set forth in the express warranty statements
accompanying such products and services. Nothing herein should be construed as
constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for
technical or editorial errors or omissions contained herein.
Intel® and Xeon® are registered trademarks of Intel Corporation in the U.S. and other
countries.
Microsoft®, Windows®, and Windows Server® are U.S. registered trademarks of the
Microsoft group of companies.
For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less
a00054055enw - 16305 - Worldwide - V24 - 07-April-2025

DA - 16305 Worldwide QuickSpecs — Version 26 — 4/7/2025 Page 58