DS-K1T607PEF
Face Recognition Terminal
DS-K1T607PEF face recognition terminal is a kind of access control device
integrated with temperature screening function. It can fast taking
skin-surface temperature and upload abnormal temperature event to the
center, which can be widely applied in multiple scenarios, such as
enterprises, stations, dwellings, factories, schools, campus and so on.
Supports Vanadium Oxide uncooled sensor to measure target's temperature
Temperature measuring range: 30 °C to 45 °C (86 °F to 113 °F), accuracy: 0.1 ° C, deviation: ± 0.5 °C
Recognition distance: 0.3 to 1.8 m
Fast temperature measurement mode: Detects face and takes temperature without identity authentication
Multiple authentication modes are available: card and temperature, face and temperature, card and face and
temperature, etc
Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the
same time, the authentication or attendance is valid
Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At
the same time, the authentication or attendance will be failed
Displays temperature measurement results on the authentication page
Triggers voice prompt when detecting abnormal temperature
Configurable door status (open/close) when detecting abnormal temperature
Transmits online and offline temperature information to the client software via TCP/IP communication and saves the
data on the client software
Face recognition duration ＜ 0.2 s/User; face recognition accuracy rate ≥ 99%
6000 face capacity, 6000 card capacity, and 100,000 event capacity
Suggested height for face recognition: between 1.4 m and 1.9 m
Supports 6 attendance status, including check in, check out, break in, break out, overtime in, overtime out
Watchdog design and tamper function
Audio prompt for authentication result
NTP, manually time synchronization, and auto synchronization
Connects to external access controller or Wiegand card reader via Wiegand protocol
Connects to secure door control unit via RS-485 protocol to avoid the door opening when the terminal is destroyed
Imports and export data to the device from the client software
* Biometric recognition products are not 100% applicable to anti-spoofing environments. If you require a higher
security level, use multiple authentication modes.
* In order to get an accurate temperature, after the device is powered on, you should wait for 90 min to warm the
device up.
Specification
Temperature measurement
Temperature range 30 °C to 45 °C (86 °F to 113 °F)
Sensor Vanadium Oxide uncooled sensor
Resolution 120 × 160
Frame rate 25 fps
Measurement accuracy 0.1 °C
Measurement deviation ± 0.5 °C, without black body calibration
Measuring distance 0.3 to 1.8 m
Screen
Size 7-inch
Type Touch screen
Camera
Pixel 2 MP
Lens Dual-lens
Network
Wired network Support, 10/100/1000 Mbps self-adaptive
Interface
Network interface 1
RS-485 1
Wiegand 1
Lock output 1
Exit button 1
Door contact input 1
IO input 2
IO output 1
TAMPER 1
Capacity
Card capacity 6000
Face capacity 6000
Event capacity 100,000
Authentication
Card type Mifare 1 card
Card reading distance 0 to 5 cm
Card reading duration ＜ 1s
Face recognition duration ＜ 0.2 s per person
Face recognition distance 0.3 to 1.8 m
Function
Face anti-spoofing Support
Live view Support
Audio prompt Support
Others
Power supply 12 VDC/2 A
0 °C to 50 °C (32 °F to 122 °F)
Working temperature For temperature measurement: 10 °C to 35 °C (50 °F to 95 °F)
Working humidity 10 to 90% (No condensing)
Application environment Indoor and windless environment use only
Dimension
Accessory
Floor Stand Bracket Table Bracket
DS-KAB671-B DS-DM0701BL
