DS-K3G501
Tripod Turnstile
The DS-K3G501 series tripod barrier is designed to detect
unauthorized entrance or exit. By adopting the turnstile
integratedly with the access control system, person should
authenticate to pass through the lane via presenting IC or
ID card, scanning QR code, etc. It is widely used in
attractions, stadiums, construction sites, residences, etc.
TCP/IP network communication: The communication data is specially encrypted to relieve the concern of privacy
leak
Barrier open/closed, free accessing, forbidden mode are selectable
Bidirectional (Entering/Exiting) lane
Remote control and management
Online/offline operation
LED indicates the entrance/exit and passing status.
Fire alarm passing: When the fire alarm is triggered, the barrier will be dropped automatically for emergency
evacuation.
Valid passing duration settings: System will cancel the passing permission if a person does not pass through the lane
within the valid passing duration.
Open/close the barrier according to the schedule template
Customized audio content
Specification
System
MCBF ＞3 million times
Interface
Network interface 1
RS-232 2
Lock output 2
Capacity
Card capacity 60,000
Event capacity 180,000
Others
More than 35 persons per minute
Throughput The actual throughput is affected by the person passing rate and passing method.
Power supply method 100 to 240 VAC; 50 to 60 Hz
Lane width 550mm
Working temperature -20 °C to 65 °C (-4 °F to 149 °F)
Working humidity 0% to 95% (No condensing)
Without package: 232 mm × 960 mm × 1208 mm (9.1" × 37.8" × 47.6")
Dimensions
With package: 390 mm × 1185 mm × 1320 mm (15.4" × 306.5" × 52.0")
Pedestal material SUS304 stainless steel
Application environment Indoor and outdoor
Protective level IP54
Without package: 45 kg (99.2 lb)
Weight
With package: 69 kg (152.1 lb)
Approval CE/FCC/CB/RoHS/REACH/WEEE
Dimension
Maintenance
The main element of the turnstile is stainless steel, which is rustless (antioxidant) and corrosion resistant (The anti corrosion
ability in the medium of acid, alkali, and salt). In order to keep the stainless steel from being oxidized or corroded, you
should clean and care the turnstile surface periodically .
The instructions and tips for maintaining the turnstile are as follows:
Select different stainless steel types according to the variety of the environments. You can select 304 stainless steel for
common circumstances and 316 stainless steel for the scenarios of seasides and chemical plants.
Keep the device surface clean and dry.
Use non-woven cloth and ethyl alcohol to clean the dirt on the device surface.
Use sourcing pad (do not use mesh cleaning ball) to clean the rust on the device surface by following the wire drawing on
the stainless steel. And then use non-woven cloth and stainless steel cleaner to wipe the device surface.
Clean and maintain the device by using non-woven cloth and stainless steel cleaner periodically. It is suggest to clean the
device every month in common circumstances and every week for severe environments (seaside and chemical plants for
instance).
Available Model
DS-K3G501 Series
