Bosch Video

DIVAR IP Series Management System

Appliance

Module:
Bosch Video DIVAR IP Series
Management Appliance
System
Module: Devices

Security Systems
1 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - Introduction

DIVAR DIVAR
IP Series Video
IP Series Storage
Video Storage Appliance
Appliance
Module: Introduction

Security Systems
2 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - Introduction

Objectives
 To be well verse with the DIVAR IP Series Storage Appliance
 To know the difference between VRM Appliance & BVMS Appliance
 To understand the differences between the available models
 To know the licenses available
 To be able to replace basic parts
 To be able to setup the RAID array of the DIVAR IP 6000 series
 To be able to factory default the appliance

Security Systems
3 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - Introduction

Outline
 Introduction of DIVAR IP Video Storage Appliance Family
 Available DIVAR IP models
 Available software licenses
 Setup & Configuration:
 Replacing basic components
 Setting up RAID 5 array for DIVAR IP 6000
 Recovering to factory default state
 Booting up for the first time
 Disabling VRM services
 Setting up iSCSI targets and virtual hard disks
 MegaRAID Storage Manager

Security Systems
4 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - Introduction

Introduction to DIVAR IP Family

 Bosch introduces the DIVAR IP family to add storage products for
entry-level up to midrange market.
 Allows for integrated hardware-application solution packages:
 Appliance with Dynamic Transcoding Technology.
 Running VRM on the storage box.
 Running BVMS with VRM on the storage box.

Security Systems
5 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - Introduction

Introduction to VRM Appliance

Bosch Video Recording Manager (VRM) Appliance

DIVAR IP 6000 1U

DIVAR IP 6000 2U

Security Systems
6 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - Introduction

What is “VRM Appliance” ?

 VRM Appliance is a perfect out-of-the-box VRM solution:
 All-in-one solution
 VRM software pre-installed
 Basic VRM license included
 Channel-upgrade possibility
 Microsoft Windows Server 2008 R2 (64-bit)
 Microsoft iSCSI target
 Single instance dynamic hardware transcoder included
 Ability to disable VRM software if required
 Flexibility by choosing various combination as “solution packages”

Security Systems
7 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - Models

DIVAR DIVAR
IP Series Video
IP Series Storage
Video Storage Appliance
Appliance
Module: Models

Security Systems
8 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - Models

Available DIVAR IP Models:

 High Line models:
 DIVAR IP 6000 1U
 DIVAR IP 6000 2U

Security Systems
9 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - Models

DIVAR IP 6000
Model DIP-6042-4HD DIP-6043-4HD DIP-6040-00N DIP-6082-8HD DIP-6083-8HD DIP-6080-00N

Form Factor 1U Rack Mount 2U Rack Mount

Capacity 4 x 2 TB 4 x 3 TB NA 8 x 2 TB 8 x 3 TB NA
HDD SATA 3.5” 7200 RPM, hot swappable
Processor Intel Pentium G6950 Dual Core (3M Cache, 2.8 GHz)
Memory 4GB, DDR3-1333 ECC UNB (2 x 2 GB)
OS Microsoft Windows Server 2008 R2, 64-bit
PSUs 2 x 700W Gold Level Redundant 2 x 740W Gold Level Redundant
Graphics Onboard VGA
Network 2 x Gigabit Ethernet LAN
iSCSI protocol
Connectivity
Max. concurrent 128 recording sessions plus 8 replay sessions
Bandwidth 200 Mbit/s (read & write)
Protection RAID-5
Warranty 3 years hardware warranty (global)
Security Systems
10 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - Models

Disk On Module - DOM

 All DIVAR IP units delivered are pre-installed and pre-configured.
 Recovery image are kept in the SATA Disk-On-Module (DOM).
 Duration of image recovery depend on individual system performance.
 All data will be deleted during the image recovery.
 System information are set to factory default setting.

DOM

Security Systems
11 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - Licenses

DIVAR DIVAR
IP Series Video
IP Series Storage
Video Storage Appliance
Appliance
Module: Licenses

Security Systems
12 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - Licenses

BVMS Appliance License

 BVMS Appliance is just a factory pre-installed standalone BVMS with
VRM software running on standard tested hardware.
 All-in-one solution
 It’s license is different from the standalone BVMS or VRM software
license
 License is tied to DIVAR IP hardware
 License is non-transferrable.

Security Systems
13 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - Basic Parts Replacement

DIVAR DIVAR
IP Series Video
IP Series Storage
Video Storage Appliance
Appliance
Module: Basic Parts Replacement

Security Systems
14 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - Basic Parts Replacement

DIVAR IP 6000 Series - Removing / Installing

Hard Drives
 Remove the faulty drive and insert
replacement.
 Ensure to the drive is seated firmly, then
latch and lock the drive in place.
 Drive rebuild is automatic
 Rebuild times may vary based on the
size of the drive and amount of data to
be rebuilt.

 NEVER REMOVE GOOD DRIVES

DURING NORMAL OPERATION!

Security Systems
15 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - Basic Parts Replacement

DIVAR IP 6000 Series – Replacing Fan

Push

Lift
 Facing the front of the unit, push down
button latch on both sides with thumbs.
 Push the cover away from you and lift up.
 Disconnect the power of the FAN

Security Systems
16 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - Basic Parts Replacement

DIVAR IP 6000 Series – Replacing Fan

 Fan unit can be lifted upwards as they are padded on rubber knobs

Security Systems
17 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - Basic Parts Replacement

DIVAR IP 6000 Series – PSU change

 The PSU can also be hot swap one
at a time.
 Remove the defective PSU by
pushing the release tab (on the back
of the PSU) as illustrated

 Pull the defective PSU and exchange

it with the new one.
 It is mandatory to leave the defective
PSU in until the replacement PSU
arrives and ready to be installed.

Security Systems
18 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - RAID

DIVAR DIVAR
IP Series Video
IP Series Storage
Video Storage Appliance
Appliance
Module: RAID

Security Systems
19 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 Disk arrays
 Recording is done on iSCSI disk arrays.
 A disk array is a unit consisting of hard drives which are managed by a
build-in controller.
 Based on the configuration, the unit has the capability to recover data from
one or two broken disks.
 This redundancy level is announced as RAID level.
 RAID = Redundant array of independent disks

 Data storage scheme using multiple disks

 RAID combines multiple hard disk drives into a single logical hard drive.
Thus, instead of seeing several different hard drives, the operating
system sees only one.

 RAID is usually implemented with identically sized disk drives.

Public | RSO EMEA | 19 May 2017| © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
20 disposal such as copying and passing on to third parties.
 Raid 0
 RAID 0: Striped Set (2 disk minimum)
without parity: provides improved
performance and additional storage
but no fault tolerance from disk errors
or disk failure.
 Any disk failure destroys the array,
which becomes more likely with more
disks in the array.

Public | RSO EMEA | 19 May 2017| © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
21 disposal such as copying and passing on to third parties.
 Raid 1
 RAID 1: Mirrored Set (2 disks
minimum) without parity: provides fault
tolerance from a single disk failure.
Array continues to operate with one
failed drive.

Public | RSO EMEA | 19 May 2017| © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
22 disposal such as copying and passing on to third parties.
 Raid 4
 RAID 4: Striped Set (3 disk minimum)
 Requires all but one drive to be
present to operate; drive failure
requires replacement, but the array is
not destroyed by a single drive failure.
 The array will have data loss in the
event of a second drive failure and is
vulnerable until the data that was on
the failed drive is rebuilt onto a
replacement drive.

Public | RSO EMEA | 19 May 2017| © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
23 disposal such as copying and passing on to third parties.
 Raid 5
 RAID 5: Striped Set (3 disk minimum)
 Idem as Raid 4 with Distributed Parity:
Distributed parity requires all but one
drive to be present to operate.

Public | RSO EMEA | 19 May 2017| © Robert Bosch GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of
24 disposal such as copying and passing on to third parties.
 DIVAR IP Series - RAID

DIVAR IP 6000 – Setup RAID-5 Disk Array

1. During the boot up, press the
keys <Ctrl> <H> together to
enter the WebBIOS page.
2. Click on the Start button to
enter the configuration page
3. Click on the Configuration 1
Wizard link.

2
3

Security Systems
25 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - RAID

DIVAR IP 6000 – Setup RAID-5 Disk Array

4. Select New Configuration option and click on Next button.
5. Select Manual Configuration option and click on Next button.

5
4

Security Systems
26 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - RAID

DIVAR IP 6000 – Setup RAID-5 Disk Array

6. Add all the detected Drives to Drive Group0. Either by holding the Shift
(select a continuous range of items) or Ctrl (select multiple non-
continuous items) key and select all the available drives.
7. Click on the Add to Array button.
8. Click on the Accept DG button when all drives are added to Drive
Groups.

7 8

Security Systems
27 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - RAID

DIVAR IP 6000 – Setup RAID-5 Disk Array

9. A new Drive Group1 is added. Click on the Next button.
10. Select the array from the drop-down box and click on the Add to SPAN
button.
11. Click on the Next button.

10

9 11

Security Systems
28 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - RAID

DIVAR IP 6000 – Setup RAID-5 Disk Array

12. Apply the following parameters and click on the Accept button.
13. Click on Yes button to confirm “Always Write Back” mode.

Parameters
RAID Level RAID 5
Strip Size 64 KB
Access Policy RW
Adaptive or
Read Policy
Ahead
Always Write
Write Policy
Back
IO Policy Cached
Drive Cache NoChange
Disable BGI No
13
12 Select Size 99.999 GB

Security Systems
29 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - RAID

DIVAR IP 6000 – Setup RAID-5 Disk Array

14. A VD 0 is created under Drive Group 0. Click on the Back button to add
a second Virtual Drive.
15. Select the array hole from the drop-down box and click on the Add to
SPAN button.
16. Click on the Next button.

14
15

16

Security Systems
30 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - RAID

DIVAR IP 6000 – Setup RAID-5 Disk Array

17. Apply the following parameters and click on the Accept button.
18. Click on Yes button to confirm “Always Write Back” mode.

Parameters
RAID Level RAID 5
Strip Size 64 KB
Access Policy RW
Adaptive or
Read Policy
Ahead
Always Write
Write Policy
Back
IO Policy Cached
Drive Cache NoChange
Disable BGI No
<use the
17 Select Size remaining 18
space left>

Security Systems
31 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - RAID

DIVAR IP 6000 – Setup RAID-5 Disk Array

19. A VD 1 is created under Drive Group 0. Click on the Accept button
20. Click on Yes button to save the configuration.
21. Click on Yes button to initialize the Virtual Drives.

20

19

21

Security Systems
32 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - RAID

DIVAR IP 6000 – Setup RAID-5 Disk Array

22. Configure the Virtual Drive 0 as Boot Drive by highlighting the VD0.
23. Select “Set Boot Drive (current=NONE)” option. Click on the Go button.
24. Verify that the Boot Drive is set for VD0. This can be identified when “Set
Boot Drive (current=NONE)” changes to “Set Boot Drive (current=0)”.
25. Click on the Home button.

22

23 24

25
Security Systems
33 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - RAID

DIVAR IP 6000 – Setup RAID-5 Disk Array

26. Verify that the 2 Virtual Drives are created successfully. Click on Exit link.
• The size for Drive 0 is always 99.9998 GB (100 GB ).
• The size for Drive 1 will depend on the number of disks used.

26

Security Systems
34 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - RAID

DIVAR IP 6000 – Setup RAID-5 Disk Array

27. Click on the Yes button to confirm.

27

28. Reboot the DIVAR IP unit when the below screen is displayed.

29
29. Reboot the unit by pressing the
Reset button.
Security Systems
35 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - RAID

DIVAR IP 6000 – Setup RAID-5 Disk Array

30. During the reboot, ensure that 2 Virtual Drives are created using RAID5.

30

Security Systems
36 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - RAID

DIVAR IP 6000 – Boot Sequence Verification

1. Boot up the DIVAR IP unit. Be sure that a monitor, keyboard and mouse
is plugged into the unit. A similar Bosch Logo below is displayed Verify
the boot sequence for DIVAR IP 6000 series on the monitor screen.

2. Do note that for DIVAR IP 6000, a VGA monitor is required.

3. Press Delete key once when the Bosch logo is displayed.

Security Systems
37 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - RAID

DIVAR IP 6000 – Boot Sequence Verification

3. On the BIOS Setup Utility page, select “Boot” option on the top menu.
4. Highlight “Boot Device Priority”. Press Enter key to view the
configuration.

3
4

Security Systems
38 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - RAID

DIVAR IP 6000 – Boot Sequence Verification

5. Verify the 1st Boot Device. Press ESC key to exit the configuration.
Information for DIVAR IP 6000 Series
Verify the 1st Boot Device is
[RAID:(Bus 01 Dev ]

Security Systems
39 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - RAID

DIVAR IP 6000 – Boot Sequence Verification

6. Highlight “Hard Disk Drives” option. Press Enter key to view the
configuration.

Security Systems
40 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - RAID

DIVAR IP 6000 – Boot Sequence Verification

7. Verify the 1st Drive. Press ESC key to exit the configuration
Information for DIVAR IP 6000 Series
Verify the following:
1st Drive is [RAID: (Bus 01 Dev ]
2nd Drive is [SATA:4M-ATP Veloci]

Security Systems
41 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - RAID

DIVAR IP 6000 – Boot Sequence Verification

8. Press F10 key to save the configuration. Select OK for the confirmation.

Security Systems
42 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - DOM Recovery

DIVAR DIVAR
IP Series Video
IP Series Storage
Video Storage Appliance
Appliance
Module: DOM Recovery

Security Systems
43 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - DOM Recovery

DOM Recovery
 There might be a need to restore the DIVAR IP appliance to the
factory state:
 Empty chassis unit
 System corruption
 RAID array failed
 Fresh start

Security Systems
44 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - DOM Recovery

DOM Recovery – DIVAR IP 6000

1. Plug in USB or PS/2 keyboard & mouse and boot up the DIVAR IP unit.
2. When the Bosch Logo has displayed, quickly press F11 to enter boot
device selection menu.

Security Systems
45 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - DOM Recovery

DOM Recovery – DIVAR IP 6000

4. Boot device selection menu is displayed

Example for DIVAR IP 6000 Series

Please select boot device :

SATA: 4M-ATP Velocity MI SATA DO

RAID: (BUS 01 Dev 00) PCI RAID Ad

 and  to move selection

ENTER to select boot device
ESC to boot using default

4. Select the SATA: 4M-ATP Velocity MI SATA DOM

5. Press Enter key.

Security Systems
46 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - DOM Recovery

DOM Recovery – DIVAR IP 6000

7. Click on Initial Factory Setup (all data on the system will be lost!).

8. All data will be ease on the entire system. Click on the OK button
Security Systems
47 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - DOM Recovery

DOM Recovery – DIVAR IP 6000

9. Windows is performing the setup. A similar screen is displayed. The
percentage count will increase as the time goes.

Do not power off the unit during the process as it will damage the DOM!
Security Systems
48 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - DOM Recovery

DOM Recovery – DIVAR IP 6000

10. The unit will reboot automatically once the setup is completed.
11. Upon first booting up into Windows Storage Server 2008, it will
perform the one time Windows setup. The unit will reboot once
Windows has completed the setup.
12. Once rebooted, the unit will be in the Windows Login screen. The unit
is now in factory default stage.
13. For security reason, you will be prompt to change the password.
• Default password: WSS4Bosch

Security Systems
49 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - First Start Up

DIVAR DIVAR
IP Series Video
IP Series Storage
Video Storage Appliance
Appliance
Module: First Start Up

Security Systems
50 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - First Start Up

First Start Up – DIVAR IP 6000

 Like all other Windows operating systems, Windows will create a user
profile for the first login.
 To create the user profile, a PS/2 or USB keyboard & mouse and a
VGA monitor is required.
 Remote Desktop will be available only after the user profile is created.
 Default password for Administrator is WSS4Bosch.
 In general operation, there is no need to login to Windows after
powering on the unit.
 If you are using the DIVAR IP 6000 as a VRM Appliance, VRM
configuration procedure applies.
 If you are using it as just for storage (without VRM service), it is required
to disable the VRM service.

Security Systems
51 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - First Start Up

First Start Up – DIVAR IP 6000

CTRL + ALT + DEL

to display login screen

Windows Login
User Name : administrator
Password: WSS4Bosch

As a good practice, it is
highly recommended to
create another user with
administrator rights.

Security Systems
52 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - First Start Up

How can VRM Appliance be disabled?

 Procedure:
 Access the Server Manager console
 From the Server Manager tree, expand the node Configuration
 Highlight on the sub-node of Services
 On the right pane, look for the service name Bosch Video
Recording Manager
 To stop the Bosch Video Recording Manager service, select and
highlight the service then:
 click on the link Stop the service
 Or right-click on the service name and select Stop
 To stop the service from starting each time the appliance boot up,
double-click on the service, change Startup Type to Disabled

Security Systems
53 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - iSCSI Targets & Virtual Disks

DIVAR DIVAR
IP Series Video
IP Series Storage
Video Storage Appliance
Appliance
Module: iSCSI Targets & Virtual Disks

Security Systems
54 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - iSCSI Targets & Virtual Disks

Manually Create an iSCSI Target

 The default factory state of the DIVAR IP have already pre-
configured the iSCSI targets and virtual disks on the operating
system.
 There might be a need to reconfigure them if there is any special
requirement of different LUN size or iSCSI target configuration.
 The following steps are provided to assist in the creation of iSCSI
targets and Virtual Disks in Microsoft Windows Server.

Security Systems
55 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - iSCSI Targets & Virtual Disks

Manually Create an iSCSI Target

1. Go to Computer Management  Storage  Microsoft iSCSI Software
 iSCSI Targets
2. Right Click and select Create iSCSI Target.
3. When Create iSCSI Target Wizard window opens, click Next button.

1
2
3

Security Systems
56 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - iSCSI Targets & Virtual Disks

Manually Create an iSCSI Target

5. Input an iSCSI target name.
E.g. BoschLun0
5
6. Input a description name.
E.g. BoschDisk1 6

7. Click the Next button.

8. Input * for the IQN identifier.
7
(iSCSI Qualified Name )
9 Click the Next button.
10. Click Finish button on
the next screen. 8

Security Systems
57 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - iSCSI Targets & Virtual Disks

Manually Creating Virtual Disks

1. Right Click on the Target created.
2. Select Create Virtual Disk for iSCSI Target.
3. When the Create Virtual Disk Wizard window open,
4. Click on the Next button.
1

Security Systems
58 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - iSCSI Targets & Virtual Disks

Manually Creating Virtual Disks

5. Input the location and name of virtual hard disk where the file will be
created
6. Click on the Next button.

Security Systems
59 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - iSCSI Targets & Virtual Disks

Manually Creating Virtual Disks

7. Input the size of the virtual hard disk in MB
8. Click on the Next button

Note:
TeraByte to MegaByte
(X TB) x 1024 x 1024
= (XXXXXXX MB)

Security Systems
60 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - iSCSI Targets & Virtual Disks

Manually Creating Virtual Disks

9. Input a description for the virtual disk.
10. Click on the Next button.
11. Click on the Finish button.
12. To create another virtual disk, repeat Steps 1 to 11.

11
10

Security Systems
61 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - MegaRAID

DIVAR DIVAR
IP Series Video
IP Series Storage
Video Storage Appliance
Appliance
Module: MegaRAID

Security Systems
62 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - MegaRAID

MegaRAID Storage Manager

 Display RAID controller information

 Available in DIVAR IP 6000 Series
 Display hard disks and controller events

Security Systems
63 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - MegaRAID

MegaRAID Storage Manager

 To run MegaRAID Storage Manager application, click
on “MegaRAID Storage Manager ” icon
 Connect to the local host

Note
Use Windows login credentials:
 DIVAR IP 6000:
 Username: Administrator

Security Systems
64 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - MegaRAID

MegaRAID Storage Manager

Silencing Audible Alarms:
1. Login to MegaRAID Storage Manager
2. Click on Physical Tab
3. Click on LSI MegaRAID Controller
4. Right Click and select “Silence Alarm”

Security Systems
65 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.
 DIVAR IP Series - MegaRAID

MegaRAID Storage Manager

Locate HDDs in Physical View:
1. Login to MegaRAID Storage 2
Manager
2. Click on Physical Tab 3
4
3. Click on Backplane
5
4. Select the hard disk slot
5. Right Click and select “Start
Locating Drive”
6. The selected disk will be flashing

Security Systems
66 ST/STS-AP | 08/07/2015 | © Robert Bosch GmbH 2015. All rights reserved, also regarding any disposal, exploitation, reproduction, editing,
distribution, as well as in the event of applications for industrial property rights.