Scribd
Upload
15 views3 pages

1600cfm - 120psig Rigsafe Compressor

ScanTech Offshore offers Rig Safe Air Compressors designed for non-hazardous area operations, providing high reliability and efficiency with a flow rate of 1600acfm at 120psig. The compressors are compact, reducing deck space requirements, and are powered by CATERPILLAR engines and SULLAIR compressor elements. Additional features include DNV 2.7-1 certification, external refueling, and optional extras for long-term rentals and extreme conditions.

Uploaded by

duansiqueira
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
15 views3 pages

1600cfm - 120psig Rigsafe Compressor

ScanTech Offshore offers Rig Safe Air Compressors designed for non-hazardous area operations, providing high reliability and efficiency with a flow rate of 1600acfm at 120psig. The compressors are compact, reducing deck space requirements, and are powered by CATERPILLAR engines and SULLAIR compressor elements. Additional features include DNV 2.7-1 certification, external refueling, and optional extras for long-term rentals and extreme conditions.

Uploaded by

duansiqueira
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Non Hazardous Area Well Test Compressors

1600cm – 120psig

Area Classification

Non Hazardous Area Operation - Temporary Equipment with Permanent Manning


The Rig Safe Air Compressors packaged by ScanTech Offshore provide the largest compressed air output in
the smallest footprint saving valuable deck space and minimising the quantity of compressors required at the
well site. Reliability is assured via the combination of CATERPILLAR engines coupled to heavy duty SULLAIR
compressor elements. Both manufacturers being chosen as celebrated providers to the offshore industry
with an enviable record of reliability. The complete service is provided by ScanTech who maintain the largest
engineering and support infrastructure dedicated exclusively to well test support globally.
In a profession where downtime costs millions why risk anything less?

Performance
Model: ST1600 RS
Delivered Flow: 1600acfm @ 120psig
Sound Level: Power (Lwa) > 102 dBA
Fuel Consumption: 85 L/Hr at full load running
Fuel Tank Capacity 35 sec Diesel 1300 litres
Ambient Operating Range: -10° to +50°C

Weight & Dimensions


Overall Length: 4240mm
Overall Width: 2420mm
Overall Height: 2730mm
Overall Weight: Gross 10,500Kg
Standard Outlets: 1 No. 3” Fig 206 ‘Weco Wing’
Container Rating: DNV 2.7-1

Contact – For Service & Support: +44 (0)1493 443300


www.scantechoffshore.com
[email protected]
Non Hazardous Area Well Test Compressors
1600cm – 120psig
Utility Requirements
Air Start Supply 250 scfm – 100 psig minimum
Air Start Connection 1” Crowfoot

Deck Loading Information

Deck Loading (Wet) 1023 Kgs/m²


Maximum Inclination (In Any Place) 7 Degrees
Free Space Required for Operation Front (Cargo Door) 1200mm
LH Side 1000mm
RH Side 1000mm
Rear 1500mm

Centre of Gravity

Contact – For Service & Support: +44 (0)1493 443300


www.scantechoffshore.com
[email protected]
Non Hazardous Area Well Test Compressors
1600cm – 120psig
Features & Benefits
 DNV 2.7-1 Container & Lifting – Worldwide Acceptance
 External Refuelling & Control Panel
 Pneumatic Engine Starting System

Optional Extras

 Extended Spare Parts for Long Term Rentals


 Stacking Equipment & Access Ladders
 Remote Package ESD – All Units Controlled From Central Point
 Yellow Alert ESD
 Extreme Low Ambient Winterisation Kits (-10 to -40◦C)

All equipment offered is subject to availability at point of order confirmation

Contact – For Service & Support: +44 (0)1493 443300


www.scantechoffshore.com
[email protected]

You might also like