Zone II Hazardous Area Well Test Compressors
1000cfm – 150psig
Area Classification
Zone II Hazardous Area – Temporary Equipment with Permanent Manning
Zone II Air Compressors packaged by ScanTech Offshore provide the largest compressed air output in the
smallest footprint saving valuable deck space and minimising the quantity of compressors required at the
well site. Reliability is assured via the combination of CATERPILLAR engines coupled to heavy duty SULLAIR
compressor elements. Both manufacturers being chosen as celebrated providers to the offshore industry
with an enviable record of reliability. The complete service is provided by ScanTech who maintain the largest
engineering and support infrastructure dedicated exclusively to well test support globally.
In a profession where downtime costs millions why risk anything less?
Performance
Model: ST1000 Zone II
Delivered Flow: 1000acfm @ 100 – 150 psig
Sound Level: Power (Lwa) > 102 dBA
Fuel Consumption: 85 L/Hr at full load running
Fuel Tank Capacity 35 sec Diesel 1300 litres
Ambient Operating Range: -10° to +32°C (+50°C with optional sea water cooling)
Weight & Dimensions
Overall Length: 4240mm
Overall Width: 2420mm
Overall Height: 2730mm
Overall Weight: Gross 12,500Kg
Standard Outlets: 1 No. 3” Fig 206 ‘Weco Wing’
Container Rating: DNV 2.7-1
Contact – For Service & Support: +44 (0)1493 443300
www.scantechoffshore.com
[email protected] Zone II Hazardous Area Well Test Compressors
1000cfm – 150psig
Utility Requirements
Air Start Supply 250 scfm – 100 psig minimum
Air Start Connection 1” Crowfoot
Deck Loading Information
Deck Loading (Wet) 1350 Kgs/m²
Maximum Inclination (In Any Place) 7 Degrees
Free Space Required for Operation Front (Cargo Door) 1200mm
LH Side 1000mm
RH Side 1000mm
Rear 1500mm
Centre of Gravity
Contact – For Service & Support: +44 (0)1493 443300
www.scantechoffshore.com
[email protected] Zone II Hazardous Area Well Test Compressors
1000cfm – 150psig
Specifications
SOLAS
Ocma Mech 1
BS5908 Zone II
BP 200 Specification
Shell ISO 27
Chevron Zone II
Lloyds Open Deck Zone II
EEMUA 107
BS EN 1834-1: 2000 - Gas Group 2A - Category 3G - Temperature Class T3
The chassis skid has been designed for easy removal from the container enabling maintenance
to be carried out with no access restrictions. The compressor can be run with chassis removed.
Contact – For Service & Support: +44 (0)1493 443300
www.scantechoffshore.com
[email protected] Zone II Hazardous Area Well Test Compressors
1000cfm – 150psig
Features & Benefits
DNV 2.7-1 Container & Lifting – Worldwide Acceptance
External Refuelling & Control Panel
Pneumatic Engine Starting System
Optional Extras
Extended Spare Parts for Long Term Rentals
Stacking Equipment & Access Ladders
Remote Package ESD – All Units Controlled From Central Point
Yellow Alert ESD
High Ambient Sea Water Cooling System (+32 to +50◦C)
Extreme Low Ambient Winterisation Kits (-10 to -40◦C)
All equipment offered is subject to availability at point of order confirmation
Contact – For Service & Support: +44 (0)1493 443300
www.scantechoffshore.com
[email protected]