TECHNICAL DATA SHEET
DOLPHIN 105 ALUMINIUM & GLASS SILICONE SEALANT
Revision Date: 20th Sept 2022 Revision No: 04 Number of Pages: 2
PRODUCT DESCRIPTION
Dolphin 105 Glass & Aluminum Silicone Sealant is 100% silicone with absolutely Zero Shrinkage. It’s a single component Acetic cure sealant,
which is cured by atmospheric moisture to form a powerful rubber seal. Dolphin 105 Silicone is specially designed for Glass and Composite Panels
and forms an unprimed adhesion to cleaned substrates like glass, glazed surfaces, galvanized aluminum, and other galvanized metals. It also
builds a high strength seal to plastics, tiles, wood, and concrete. It is resistant to UV and assures enhanced quality and long term performance.
TECHNICAL PROPERTIES
Properties Test Method Specifications
Chemical Base 1-C Silicone
Cure Mechanism Moisture
Cure Type Acetoxy
As Supplied @ 25°C, 50% RH
Color Clear, Black
Consistency Homogeneous paste
Density ASTM D 1475 1.00 + 0.02 g/ml
Flow Properties ASTM C 639 0 (non-sag) mm
Skin Over Time ASTM C 679 Approx. 8 minutes
Tack Free Time ASTM C 679 Approx. 13 minutes
Depth Cure, 24 hrs. Lab Test ~ 2.5 mm
As Cured – 7 Days @ 25°C, 50% RH
Hardness (Shore A) ASTM D 2240 21-26 Points
Tensile Strength ASTM D 412 2
< 0.90 N/mm
Elongation ASTM D 412 < 500 %
Young’s Modulus ASTM D 412 < 0.40 MPa
Service Temp. -20 to +250 °C
Application Temp. 5 – 45 °C
(Information on this data sheet is subject to change without prior notice and should not be used for writing specifications)
(Curing time (Skin Over Time & Tack Free Time) may vary depending on climatic condition during application )
TYPICAL USES KEY FEATURES
• Galvanized Aluminium Sliding and Galvanized Metal Sliding • Negligible Shrinkage
• General Industrial Applications • Excellent Adhesion
• Glass Glazing • Anti-Fungal & Anti-Bacterial
• Sheet metalwork • UV & Weather resistant
• General Sealing and waterproofing
• General Constructions
AMI | TDS | [email protected] | www.muqarram.com Page 1 of 2
Dolphin 105 aluminum & glass silicone sealant is available in Clear, White, Black, and Grey. RAL* colors
COLORS are available upon request.
*Special color orders may require lead time and minimum order quantities.
PACKAGING Dolphin 105 aluminum & glass silicone sealant is available in standard caulking cartridges and 200 Liter drum.
The substrate areas that will be in contact with sealant must be clean, dry, and free of all loose materials, dust,
SURFACE PREPARATION
dirt, rust, oil, and other contaminants. Non - porous substrates should be cleaned with a solvent and a clean, lint -
free, cotton cloth. Wipe dry immediately with another such cloth before the solvent evaporates from the surface
Joint dimensions:
Min. width for joints: 5 mm, Max. width for joints: 30 mm, Min. depth for joints: 5 mm.
JOINT DIMENSIONS
Recommendation Sealing jobs:
Joint width= 2 X Joint depth
TOOLING AND FINISHING Immediately tool sealant after application and before skin formation. Tooling of sealant should be done in one
continuous stroke. Remove masking tape immediately after tooling is completed.
Uncured sealant may be removed from tools, equipment, and non-porous surfaces with solvents. For porous
CLEANUP AND REMOVAL
substrates, allow the sealant to cure before removal by peeling or other mechanical means. Cured sealant can
only be removed mechanically.
Not paintable. May not be suitable to join sensitive natural stones such as marble, granite, or quartz, as this may
cause staining. Not to be used in contact with sensitive metals such as lead, copper, brass, zinc, carbon steel,
LIMITATIONS
galvanized iron or magnesium as corrosion may occur during acetic acid release/sealant cure. Substrate
compatibility test is always recommended.
When stored in original unopened container at or below 77°F (25°C) in dry warehouse conditions, Dolphin 105
STORAGE AND SHELF LIFE
aluminum & glass silicone sealant has a shelf life of 18 months from manufacturing date. Containers should
always be kept sealed when not in use.
Use in well-ventilated area. Direct contact of uncured sealant irritates eyes and may irritate skin. Over exposure to
vapor may irritate eyes, nose, and throat. Do not handle contact lenses with sealant on hands. In case of eye
HANDLING PRECAUTIONS
contact, flush eyes with water for 15 minutes. Obtain medical attention. In case of skin contact, remove from skin
and flush with water.
KEEP OUT OF REACH OF CHILDREN • KEEP CONTAINER TIGHTLY CLOSED • FOR INDUSTRIAL & POFESSIONAL USE
The information and data contained herein is believed to be accurate and reliable; however, it is the user’s responsibility to determine suitability of use. Since the
supplier cannot know all the uses, or the conditions of use to which these products may be exposed, no warranties concerning the fitness or suitability for a particular
use or purpose are made. AMI reserves the right to change the properties of its products without notice.
AMI | TDS | [email protected] | www.muqarram.com Page 2 of 2
