m

.co
Engineered with LOGO! Soft Comfort
au

Simply ingenious for

ai

Siemens

small automation tasks

Certified Partner
Industry, RC
h
en

Logic module LOGO!

di
Co

siemens.com/logo

dffa-b10079-02-br-logo-210x280.3-63032.indd 1 16.11.20 12:58

 LOGO! 8 –
Small is beautiful
Simple installation, minimum wiring, The latest generation of logic modules
user-friendly programming: You can easily
implement small automation projects • Eight basic units for all voltages, with or without a large display
with LOGO!, the intelligent logic module • All devices are equipped with an Ethernet port and connections are, of course,
compatible with previous versions
from Siemens. The LOGO! logic module
• Seven digital modules and three analog modules
saves space in the control cabinet, and
• Maximum configuration: 24 digital inputs, 20 digital outputs, 8 analog inputs
lets you easily implement functions, such and 8 analog outputs
as time-delay switch, time relay, counter • The temperature range has been extended to between –20 °C and +55 °C for
and auxiliary relay. LOGO! basic units as of product version FS:04 and for expansion modules as of
product version FS:03
• Time synchronization between LOGO! basic units (version FS:04 and higher)
The LOGO! Soft Comfort V8.2 engineering • LOGO! 8 as SIPLUS extreme for use in especially harsh conditions, e.g. extreme
software offers not only familiar operation temperature ranges, 100% relative humidity including condensation and frost.
in single mode but also easy operation in Conformal coating for protection against chemically, biologically and mechanically
network mode. Automatic configuration active substances as well as salt spray
of communication displayed in the net-
Convenient display
work view, the ability to open as many as
three programs at once, and the use of • A six-line display with 16 characters per line allows message texts to be
drag & drop to easily transfer signals from clearly formulated
one program to another – these are just a • Choice of white, orange, and red backlighting for many options, such as the
few of the many user-friendly options. highlighting of alarm statuses, for example

The web server can be configured by the

user to enable control of automation
components via mobile devices.

Ethernet for everybody and everything – new standard with LOGO! 8

• Integrated Ethernet interface for the entire LOGO! 8 product family. This makes
it possible for LOGO! modules to communicate with each other and with all
SIMATIC S7 systems via Ethernet
• Modbus TCP/IP is an additional communication protocol for LOGO! 8 (version
m
FS:04 and higher). This enables LOGO! to act as either a client or a server
• With the LOGO! CSM add-on module as an Ethernet 4-port switch expanding
the Ethernet interfaces, small local Ethernet networks can also be implemented
.co
in a cost-effective manner
• Time synchronization via NTP – now also between LOGO! basic modules
(version FS:04 and higher)
au

Integrated web server – it couldn′t be easier

• Integrated web server in all basic units for monitoring and control with LOGO!
via WLAN and the Internet; password-protected and suitable for all conventional
ai

browsers
• The web server is easy to configure via mouse click in the software – absolutely
h

no HTML programming knowledge required. Choice of same look and feel as

LOGO! or TDE display. Check a box for the web server – done! LOGO! 8 is able to
en

be operated via smartphone, tablet, or PC with the same look and feel as the
LOGO! 8 or TDE display; LOGO! 8 router connection required
• New: Self-configured display with the option of designing web pages for mobile
di

devices using your own pictures and icons. Software for creating web pages does
not require HTML knowledge. Data stored on a micro SD card in LOGO!. Projects
can be further processed in HTML
Co

dffa-b10079-02-br-logo-210x280.3-63032.indd 2 16.11.20 12:58

 Ordering data
Designation Article No.
Description
Power supply Digital inputs Digital Analog Outputs
outputs inputs
LOGO! 8 basic units
LOGO! 8 Basic with 6-line LCD display and cursor keys, Ethernet interface
8, of which 4 can be Up to 4 0.3 A
LOGO! 24 CE 24 V DC 4 6ED1052-1CC08-0BA0
used as AI (0…10 V) (0...10 V) transistor
8, of which 4 can be Up to 4
LOGO! 12/24 RCE 12…24 V DC 4 10 A relay 6ED1052-1MD08-0BA0
used as AI (0…10 V) (0...10 V)
LOGO! 24 RCE 24 V AC/DC 8 4 – 10 A relay 6ED1052-1HB08-0BA0
LOGO! 230 RCE 115…230 V AC/DC 8 4 – 10 A relay 6ED1052-1FB08-0BA0

Ordering data
Designation Article No.
Description
Power supply Digital inputs Digital Analog Outputs
outputs inputs
LOGO! 8 basic units
LOGO! 8 Pure without LCD display and without cursor keys, Ethernet interface m
8, of which 4 can be Up to 4 0.3 A
LOGO! 24 CEo 24 V DC 4 6ED1052-2CC08-0BA0
used as AI (0…10 V) (0…10 V) transistor
.co
8, of which 4 can be Up to 4
LOGO! 12/24 RCEo 12…24 V DC 4 10 A relay 6ED1052-2MD08-0BA0
used as AI (0…10 V) (0…10 V)
LOGO! 24 RCEo 24 V AC/DC 8 4 – 10 A relay 6ED1052-2HB08-0BA0
LOGO! 230 RCEo 115…230 V AC/DC 8 4 – 10 A relay 6ED1052-2FB08-0BA0
au
ai

Ordering data
SIPLUS Based on
h

Operating range
Article No. Article No.
en

LOGO! 8 SIPLUS basic devices

SIPLUS LOGO! 24 CE 6AG1052-1CC08-7BA0 6ED1052-1CC08-0BA0
SIPLUS LOGO! 12/24 RCE –20…+70 °C 6AG1052-1MD08-7BA0 6ED1052-1MD08-0BA0
di

Start-up temperature up to –20 °C

SIPLUS LOGO! 24 RCE with conformal coating 6AG1052-1HB08-7BA0 6ED1052-1HB08-0BA0
SIPLUS LOGO! 230 RCE 6AG1052-1FB08-7BA0 6ED1052-1FB08-0BA0
Co

dffa-b10079-02-br-logo-210x280.3-63032.indd 3 16.11.20 12:58

 Ordering data
Designation Article No.
Description
Power supply Digital inputs Digital Analog Outputs
outputs inputs
LOGO! 8 expansion modules
Digital I/O expansion modules
LOGO! DM8 24,
24 V DC 4 4 – 0.3 A 6ED1055-1CB00-0BA2¹⁾
Transistor DA
LOGO! DM8 12/24 R 12…24 V DC 4 4 – 5 A relay 6ED1055-1MB00-0BA2¹⁾
LOGO! DM8 24 R 24 V AC/DC 4 4 – 5 A relay 6ED1055-1HB00-0BA2¹⁾
LOGO! DM8 230 R 115…230 V AC/DC 4 4 – 5 A relay 6ED1055-1FB00-0BA2¹⁾
LOGO! DM16 24,
24 V DC 8 8 – 0.3 A 6ED1055-1CB10-0BA2
Transistor DA
LOGO! DM16 24 R 24 V DC 8 8 – 5 A relay 6ED1055-1NB10-0BA2¹⁾
LOGO! DM16 230 R 115…230 V AC/DC 8 8 – 5 A relay 6ED1055-1FB10-0BA2

Ordering data
Designation Article No.
Description
Digital Analog
Power supply Digital inputs Outputs
outputs inputs
LOGO! 8 expansion modules
Analog expansion modules
LOGO! AM2
6ED1055-1MA00-0BA2¹⁾
0…10 V or 0/4…20 mA
LOGO! AM2 RTD
12…24 V DC 10-bit resolution – 2 –
m
–50…200 °C, 12…24 V DC 0.25 °C resolution – 2 – 6ED1055-1MD00-0BA2¹⁾
.co
2/3 wire (Pt100/1000)
LOGO! AM2 AQ with 0…10 V DC /
24 V DC 10-bit resolution – – 6ED1055-1MM00-0BA2¹⁾
2 analog outputs 0/4…20 mA
au

Communication and networking

LOGO! CSM12/24 12…24 V DC 4x RJ45 Port Ethernet Switches 6GK7177-1MA20-0AA0
LOGO! CMR2020 Communication module for connecting to GSM/GPRS²⁾ 6GK7142-7BX00-0AX0
ai

LOGO! CMR2040 Communication module for connecting to GSM/GPRS/UMTS/LTE²⁾ 6GK7142-7EX00-0AX0

LOGO! CMK2000 Communication module for building automation with KNX 6BK1700-0BA20-0AA0
h

Antennas
en

GPS antenna ANT895-6ML with N connect female connector for reception of GPS data on the LOGO! CMR 6GK5895-6ML00-0AA0
Flexible connecting cable with N connect/SMA male for linking GPS antenna and LOGO! CMR 6XV1875-5LH50
GPRS/LTE antenna Rod antenna with 5 m flexible connecting lead SMA male
6NH9860-1AA00
di

ANT794-4MR for establishing a mobile connection via the LOGO! CMR

Co

¹⁾ Also available as SIPLUS extreme version, ²⁾ Country approvals: www.siemens.com/mobilenetwork-approvals

dffa-b10079-02-br-logo-210x280.3-63032.indd 4 16.11.20 12:58

 Ordering data
Designation Description Article No.
LOGO! 8 Software
for Windows 10, 8, 7, XP, Linux and Mac OS X; on DVD,
LOGO! Soft Comfort V 8.2 6ED1058-0BA08-0YA1
backward compatible, including LOGO! Web Editor
LOGO! 8 Text Display HMI
LOGO! TDE Text Display 6ED1055-4MH08-0BA0¹⁾

Ordering data
Designation Description Article No.
LOGO! 8 Power Supplies
for converting the line voltage of 85...264 V AC / 110...300 V DC for converting the
LOGO!Power
line voltage of 12 V DC or 24 V DC
LOGO!Power 12 V / 0.9 A 18 mm wide 6EP3320-6SB00-0AY0
6EP3321-6SB00-0AY0
LOGO!Power 12 V / 1.9 A
LOGO!Power 12 V / 4.5 A
36 mm wide
54 mm wide
m
6EP3322-6SB00-0AY0
6EP3330-6SB00-0AY0
.co
LOGO!Power 24 V / 0.6 A 18 mm wide
LOGO!Power 24 V / 1.3 A 36 mm wide 6EP3331-6SB00-0AY0
LOGO!Power 24 V / 2.5 A 54 mm wide 6EP3332-6SB00-0AY0
LOGO!Power 24 V / 4.0 A 72 mm wide 6EP3333-6SB00-0AY0
au

LOGO! Inrush Current Limiter

For limiting the inrush current to 5 A of devices connected to 100 – 240 V AC.
LOGO! ICL230 6EP4683-6LB00-0AY0
ai

18 mm wide
h
en
di
Co

dffa-b10079-02-br-logo-210x280.3-63032.indd 5 16.11.20 12:58

 Ordering data
Designation Description Article No.
LOGO! 8 Starter Kits
In Tanos Box with: LOGO! 8, LOGO! Soft Comfort V8, WinCC Basic, Ethernet cable
LOGO! 8 12/24 V Starter Kit LOGO! 12/24 RCE, LOGO!Power 24 V, 1.3 A 6ED1057-3BA01-0AA8
LOGO! 8 230 V Starter Kit LOGO! 230 RCE 6ED1057-3BA03-0AA8
LOGO! 8 TDE Starter Kit LOGO! 12/24 RCEo, LOGO!Power 24 V, 1.3 A, LOGO! TDE 6ED1057-3BA11-0AA8
LOGO! 8 12/24 V + KP300 LOGO! 12/24 RCE, LOGO!Power 24 V, 1.3 A,
6AV2132-0HA00-0AA1
Basic Starter Kit SIMATIC HMI KP300 Basic mono PN
LOGO! 8 12/24 V + KTP400 LOGO! 12/24 RCE, LOGO!Power 24 V, 1.3 A,
6AV2132-0KA00-0AA1
Basic Starter Kit SIMATIC HMI KTP400 Basic
LOGO! 8 12/24 V + KTP700 LOGO! 12/24 RCE, LOGO!Power 24 V, 1.3 A,
6AV2132-3GB00-0AA1
Basic Starter Kit SIMATIC HMI KTP700 Basic

m
.co
au
h ai

Heribert Heitmeier, trout farmer from Paderborn / Daniel Miehling,

North-Rhine Westphalia, Germany, and LOGO! fan homeowner and LOGO! fan
en

Heribert Heitmeier counts on LOGO! to monitor the oxygen Daniel Miehling relies on LOGO! for convenience and
content of his fish ponds and water aerator and control the safety in the home, from the automatic control of blinds
di

automatic feeding equipment. and lights to presence simulation.

Co

dffa-b10079-02-br-logo-210x280.3-63032.indd 6 16.11.20 12:58

 Remote communication via the cellular wireless network
• With the LOGO! CMR, a cell phone or tablet can receive status data and alarms
from the LOGO! station via text message or email
• The user can configure text messages as plaintext (e.g. FAN_ON)
• Secure remote access via https or Open VPN in the mobile network allows
configuration changes and diagnostics both on the web server of the
LOGO! CMR and on LOGO! 8. The program can be uploaded and downloaded
to and from LOGO! 8
• Position detection via GPS can be used, e.g. for cost-effective container tracking.
The position is reported to the LOGO! basic module or passed on to a central
office by text message or email
• Via LOGO! CMR, the clock time of the LOGO! 8 can be synchronized with an
accessible NTP server, a GPS or a mobile wireless signal

Text display
• LOGO! TDE with two Ethernet interfaces
• The Ethernet connection can bridge a distance of over ten meters between
LOGO! TDE and LOGO! 8
• Large display with six lines and 20 characters per line for informative
messages in plaintext
• As with the LOGO! display, the TDE offers selectable white, orange, and
red backlighting for optical highlighting

Software quite simple – LOGO! Soft Comfort

• Familiar, easy operation in single mode and incredibly simple configuration
in network mode
• Three programs can be displayed side-by-side; drag and drop can be used to
easily drag signals from one program to another m
• Smooth migration of programs from previous versions
• LOGO! Access Tool for direct transfer of process values into an Excel table
during operation
.co
• LOGO! Web Editor (LWE) for the design of application specific webpages
(without HTML knowledge)
au

The new module for building automation with KNX

• With the LOGO! CMK2000 communication module, the LOGO! 8 can be
implemented as an intelligent controller in the KNX system
ai

• LOGO! is easy to connect to CMK2000 via Ethernet, which means the complete
LOGO! hardware configuration can be used for KNX
h

• Up to 50 communication objects can be configured via KNX, independent of

the input and output points – meaning more flexibility for your project
en

• Autonomous processing of user programs, independent of KNX, evaluation of

KNX and industrial sensors and control of KNX actuators
• Time and date synchronization as master or slave in networked systems
di
Co

dffa-b10079-02-br-logo-210x280.3-63032.indd 7 16.11.20 12:59