Question Bank

ITS03 – Electrical Panel Building

INSTRUMENTATION TECHNICIAN APPRENTICESHIP

DURATION 1 HOUR(S)
Name :
Position :
Training Date :
Possible : Marks
Actual :
Percentage :
Trainer’s Name :
Trainer’s Signature :
 NMA-APP-DA-ITS03-01
ELECTRICAL PANEL BUILDING
Revision: A

Written: 9 Apr 2022 Page 2 of 10

 NMA-APP-DA-ITS03-01
ELECTRICAL PANEL BUILDING
Revision: A

Q01. How to protect panel from solid objects / liquids is called? Marks

A Enclosure ( 1 )
IP rating
C Barricade
D None of the above

Q02. Appropriate Personal Protective Equipment should be worn to protect from hazards that Marks
may be encountered during activities of electrical panel building?
A Safety glasses ( 1 )
B Face shield
C Safety gloves
All of the above

Q03. Such an item would be known as a control panel and could control many items of Marks
equipment but for this unit you will be just building a basic control panel that will?
A Give a degree of physical protection ( 1 )
B Have a basic method of isolation
C Be able to switch on and off the motor
All of the above

Q04. What drawings do you need to produce? Marks

Layout and schematic drawings. ( 1 )

B Hazardous Area Classification Drawing
C Escape route drawing
D None of the above

Q05. They are many different types of control panels such as? Marks

A Motor Control Centre (MCC) ( 1 )

B Power Control Centre (PCC)
C PLC Control Panel
All of the above

Written: 9 Apr 2022 Page 3 of 10

 NMA-APP-DA-ITS03-01
ELECTRICAL PANEL BUILDING
Revision: A

Q06. Devices or modules are installed within a Control Panel? Marks

A Fuses ( 1 )
B Miniature Circuit Breaker (MCB)
C Contactor
All of the above

Q07. What the function of fuses in a Control Panel? Marks

A To stop working if the electric current is too high ( 1 )

B To prevent fire
C To prevent other damage
All of the above

Q08. What is the basis the fuses can work? Marks

Thermal property of current ( 1 )

B Overload of power
C Unbalance load
D None of the above

Q09. Below is the function of Push Button? Marks

A Make or break an electric circuit ( 1 )

B Interrupting the current
C Diverting it from one conductor to another
All of the above

Q10. Below is categorized as special PPEs for Electrical Panel Building Marks

A Masker ( 1 )
Hand gloves and safety goggles
C Full-body harness with connector and anchorage
D High visible vest

Written: 9 Apr 2022 Page 4 of 10

 NMA-APP-DA-ITS03-01
ELECTRICAL PANEL BUILDING
Revision: A

Q11. What is the function of Emergency Stop push button? Marks

A To start / stop button ( 1 )

To break the live control circuit immediately if emergency condition
C As an alarm indication
D None of the above

Q12. Where is Emergency Stop push button should be installed? Marks

Where very easy to access on it ( 1 )

B Where limited access on it
C Where people get the difficult to access it
D None of the above

Q13. What is function of indicator lamp? Marks

To indicate whether power is on or a motor is in operation ( 1 )

B To illuminate the panel
C To give alarm during emergency condition
D None of the above

Q14. What is main purpose of Isolator? Marks

A To open or close another circuit ( 1 )

To isolate one portion of the circuit from the other and is not intended to be opened
while current is flowing in the line
C To switch an electrical power circuit
D None of the above

Q15. Where is Isolator will be used? Marks

A On incoming of the breaker ( 1 )

B On outgoing of the breaker
On both ends of the breaker
D None of the above

Written: 9 Apr 2022 Page 5 of 10

 NMA-APP-DA-ITS03-01
ELECTRICAL PANEL BUILDING
Revision: A

Q16. What is the function of Cable Trunking in Electrical Panel? Marks

A As an accessory ( 1 )
B To indicate cable location
To protect cables and provide space for other electrical equipment
D None of the above

Written: 9 Apr 2022 Page 6 of 10

 NMA-APP-DA-ITS03-01
ELECTRICAL PANEL BUILDING
Revision: A

Q17. In wiring application, where the cable protection is essential, you will use? Marks

A PVC conduit ( 1 )
Open slot PVC Trunking
C Cable Trunking
D None of the above

Q18. What is function Spiral Web? Marks

To protect cables which are routed near equipment which may trap them such as ( 1 )
across door hinges
B To protect cable connection inside panel
C To make distance between cables inside panel
D None of the above

Q19. Why is Modular Connection Block mounted on a rail? Marks

To ensure they stay in their fixed position ( 1 )

B To ensure they do not fall
C To make great position
D None of the above

Q20. What will be used to connect between electrical load or feeder to electrical panel? Marks

A Wiring or cable ( 1 )
B Ladder or tray
Cable Trunking
D None of the above

Written: 9 Apr 2022 Page 7 of 10

 NMA-APP-DA-ITS03-01
ELECTRICAL PANEL BUILDING
Revision: A

Q21. Which one is correct in steps to design and build a Control Panel? Marks

A Drawing  Purpose  List of Materials and Tools  Fitting Equipment’s  ( 1 )

Working with the box  Wiring  Function Test  Commissioning
Purpose  Drawing  List of Materials and Tools  Working with the box 
Fitting Equipment’s  Wiring  Function Test  Commissioning
C Purpose  Drawing  List of Materials and Tools  Fitting Equipment’s 
Working with the box  Wiring Function Test  Commissioning
D Purpose  Drawing  List of Materials and Tools  Working with the box 
Wiring  Fitting Equipment’s  Function Test  Commissioning

Q22. You require drawings in building Electrical Panel, which one is correct? Marks

A Layout drawing ( 1 )
B A schematic diagram showing the control side of the circuit
C A schematic showing the power side of the circuit
All of the above

Q23. What is purpose of Testing the Control Panel? Marks

A To get required value ( 1 )

B To ensure the Control Panel is safe
To indicate Control Panel is ready to be used
D To complete step in designing and building

Q24. Following test are required to test the panel? Marks

A Continuity tests ( 1 )
B Earthing continuity test
C Insulation resistance test
All of the above

Written: 9 Apr 2022 Page 8 of 10

 NMA-APP-DA-ITS03-01
ELECTRICAL PANEL BUILDING
Revision: A

Q25. After testing the panel is complete, you require final test is called? Marks

A Commissioning ( 1 )
B Function Test
C Pre-commissioning
All of the above

TOTAL SCORE

END OF TEST

Written: 9 Apr 2022 Page 9 of 10

 NMA-APP-DA-ITS03-01
ELECTRICAL PANEL BUILDING
Revision: A

Document Development History

Prepared / Approved &
Date Rev Description
Reviewed by Signed by
A Issued for Review

Document Information Entry Form

Test Type: QUESTION BANK
Test Title: ELECTRICAL PANEL BUILDING
Long Doc. Number: NMA-APP-DA-ITS03-01
Current Revision: A
Date written: 9 Apr 2022

Written: 9 Apr 2022 Page 10 of 10