SAFETY DATA SHEET

according to 1907/2006/EC, Article 31

Page 1/7

KEMET DIAMOND COMPOUND 1 MICRON FLASH

Revision 4
Revision date 2015-06-18

SECTION 1: Identification of the substance/mixture and of the company/undertaking

1.1. Product identifier
Product name KEMET DIAMOND COMPOUND 1 MICRON FLASH
1.2. Relevant identified uses of the substance or mixture and uses advised against
Product Use [SU3] Industrial uses: Uses of substances as such or in preparations at industrial sites; [SU0]
Other; [PC25] Metal working fluids; [PROC21] Low energy manipulation of substances bound in
materials and/or articles; [ERC12a] Industrial processing of articles with abrasive techniques (low
release);
1.3. Details of the supplier of the safety data sheet
Company Kemet International Ltd
Address Parkwood Trading Estate
Maidstone
Kent
ME15 9NJ
Web www.kemet.co.uk
Telephone +44 (0)1622 755287
Fax +44 (0)1622 670915
Email [email protected]
Email address of the [email protected]
competent person
1.4. Emergency telephone number
Emergency telephone number +44 (0) 1622 755287
Company N Roper
9.00-5.00

SECTION 2: Hazards identification

2.1. Classification of the substance or mixture
2.1.1. Classification - Xn; R65 R66
1999/45/ЕC Symbols: Xn: Harmful.
Main hazards Harmful: may cause lung damage if swallowed. Repeated exposure may cause skin dryness or
cracking.
2.1.2. Classification - EC Asp. Tox. 1: H304; Eye Dam. 1: H318;
1272/2008
2.2. Label elements
Hazard pictograms

Signal Word Danger

Copyright © 2015 ChemSoft Limited. All rights reserved. Print date 2015-09-10
Powered by
 Page 2/7

KEMET DIAMOND COMPOUND 1 MICRON FLASH

Revision 4
Revision date 2015-06-18

2.2. Label elements

Hazard Statement Asp. Tox. 1: H304 - May be fatal if swallowed and enters airways.
Eye Dam. 1: H318 - Causes serious eye damage.
Precautionary Statement: P280 - Wear protective gloves/protective clothing/eye protection/face protection.
Prevention
Precautionary Statement: P301+P310 - IF SWALLOWED: IF SWALLOWED: Immediately call a POISON CENTER/doctor/ .
Response P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact
lenses, if present and easy to do. Continue rinsing.
P310 -Immediately call a POISON CENTER/doctor/ .
P331 - Do NOT induce vomiting.
Precautionary Statement: P405 - Store locked up.
Storage
Precautionary Statement: P501 - Dispose of contents/container to
Disposal
2.3. Other hazards
Other hazards Contact with the eyes should be avoided due to the abrasive nature of the product. PBT/vPvB
assessment is not available as a chemical safety assessment is either not required or has not
been conducted.

SECTION 3: Composition/information on ingredients

3.2. Mixtures
67/548/EEC / 1999/45/EC
Chemical Name Index No. CAS No. EC No. REACH Registration Conc. Classification M-factor.
Number (%w/w)
Polyoxyethylene Tridecyl 73038-25-2 1 - 10% Xi; R38-41
Phosphate Ester
Mineral Oil 232-455-8 01-2119487078-27 40 - 50% Xn; R65 R66

Phosphoric acid…% 015-011-00-6 7664-38-2 231-633-2 0 - 0.5% C; R34

(Orthophosphoric acid)

EC 1272/2008
Chemical Name Index No. CAS No. EC No. REACH Registration Conc. Classification M-factor.
Number (%w/w)
Polyoxyethylene Tridecyl 73038-25-2 1 - 10% Skin Irrit. 2: H315; Eye Dam.
Phosphate Ester 1: H318;
Mineral Oil 232-455-8 01-2119487078-27 40 - 50% EUH066; Asp. Tox. 1: H304;

None of the ingredients in this formulation are listed as hazardous or are required to be declared
under the minimum concentration limits given by the COSHH Regluations.
Further information
None of the ingredients in this formulation are listed as hazardous or are required to be declared
under the minimum concentration limits given by the COSHH Regluations.

SECTION 4: First aid measures

4.1. Description of first aid measures
Inhalation Seek medical attention.
Eye contact Rinse immediately with plenty of water for 15 minutes holding the eyelids open. Seek medical
attention. May cause irritation to eyes.
Skin contact May cause irritation to skin. Wash with soap and water.
Ingestion DO NOT INDUCE VOMITING. Rinse mouth thoroughly. Drink 1 to 2 glasses of water. Seek
medical attention.
4.2. Most important symptoms and effects, both acute and delayed
Inhalation Inhalation may cause coughing, tightness of the chest and irritation of the respiratory system.
Eye contact May cause temporary eye irritation or eye damage due to the abrasive nature of the product.

Copyright © 2015 ChemSoft Limited. All rights reserved. Print date 2015-09-10
Powered by
 Page 3/7

KEMET DIAMOND COMPOUND 1 MICRON FLASH

Revision 4
Revision date 2015-06-18

4.2. Most important symptoms and effects, both acute and delayed
Skin contact Prolonged contact may cause redness, irritation and dryness.
Ingestion Ingestion may cause nausea and vomiting.
4.3. Indication of any immediate medical attention and special treatment needed
Inhalation Remove the affected person from the source of contamination immediately.
Eye contact Rinse immediately with plenty of water for 15 minutes holding the eyelids open.
Skin contact Wash with soap and water.
Ingestion DO NOT INDUCE VOMITING. Drink 1 to 2 glasses of water.
General information
If you feel unwell, seek medical advice (show the label where possible). Wash all contaminated
clothing before reuse.

SECTION 5: Firefighting measures

5.1. Extinguishing media
Use as appropriate: Carbon dioxide (CO2), Dry chemical, Foam. Use extinguishing media
appropriate to the surrounding fire conditions.
5.2. Special hazards arising from the substance or mixture
Toxic Fumes and Dust may be formed in fire conditions.
5.3. Advice for firefighters
Wear:. Self-contained breathing apparatus.

SECTION 6: Accidental release measures

6.1. Personal precautions, protective equipment and emergency procedures
Ensure adequate ventilation of the working area. Sweep up.
6.2. Environmental precautions
Do not allow product to enter drains. Do not flush into surface water.
6.3. Methods and material for containment and cleaning up
Clean area thoroughly with detergent. Clean spillage area thoroughly with plenty of water. Transfer
to suitable, labelled containers for disposal.
6.4. Reference to other sections
See section 2, 7, 8 & 9 for further information.

SECTION 7: Handling and storage

7.1. Precautions for safe handling
Avoid contact with eyes and skin. Wear suitable protective equipment.
7.2. Conditions for safe storage, including any incompatibilities
Keep in a cool, dry, well ventilated area. Store in original container. Do NOT allow to freeze.
7.3. Specific end use(s)
Use as Supplied. For use as a metal working lubricant/coolant in industrial applications only.
Suitable packaging
Plastic containers.

SECTION 8: Exposure controls/personal protection

8.1. Control parameters

Ensure adequate ventilation of the working area.

Copyright © 2015 ChemSoft Limited. All rights reserved. Print date 2015-09-10
Powered by
 Page 4/7

KEMET DIAMOND COMPOUND 1 MICRON FLASH

Revision 4
Revision date 2015-06-18
8.1.1. Exposure Limit Values
Mineral Oil WEL 8-hr limit ppm: WEL 8-hr limit mg/m3: 5 Oil Mist
WEL 15 min limit ppm: WEL 15 min limit mg/m3:
WEL 8-hr limit mg/m3 total - WEL 15 min limit mg/m3 total -
inhalable dust: inhalable dust:
WEL 8-hr limit mg/m3 total - WEL 15 min limit mg/m3 total -
respirable dust: respirable dust:
Phosphoric acid…% WEL 8-hr limit ppm: - WEL 8-hr limit mg/m3: 1
(Orthophosphoric acid)
WEL 15 min limit ppm: - WEL 15 min limit mg/m3: 2
WEL 8-hr limit mg/m3 total - WEL 15 min limit mg/m3 total -
inhalable dust: inhalable dust:
WEL 8-hr limit mg/m3 total - WEL 15 min limit mg/m3 total -
respirable dust: respirable dust:

8.2. Exposure controls

8.2.1. Appropriate engineering Ensure adequate ventilation of the working area.

controls
8.2.2. Individual protection Avoid contact with eyes and skin. Adopt best Manual Handling considerations when handling,
measures carrying and dispensing.
Eye / face protection Safety glasses. Avoid contact with eyes.
Skin protection - Chemical resistant gloves (PVC).
Handprotection
Respiratory protection Not normally required. Wear suitable respiratory equipment when necessary.
8.2.3. Environmental exposure Dispose of this material and its container to hazardous or special waste collection point.
controls

SECTION 9: Physical and chemical properties

9.1. Information on basic physical and chemical properties

Appearance Paste
Colour Various Depending On Grade
Odour threshold No data available
pH > 5
Melting point No data available
Initial boiling point No data available
Flash point Not applicable.
Evaporation rate No data available
Flammability (solid, gas) No data available
Vapour pressure No data available
Vapour density No data available
Relative density 0.95g/ml Typical
Partition coefficient No data available
Autoignition temperature No data available
Viscosity Not applicable.
Explosive properties Not applicable.
Oxidising properties No data available
Solubility Miscible in water

9.2. Other information

Copyright © 2015 ChemSoft Limited. All rights reserved. Print date 2015-09-10
Powered by
 Page 5/7

KEMET DIAMOND COMPOUND 1 MICRON FLASH

Revision 4
Revision date 2015-06-18

9.2. Other information

Conductivity No data available

Surface tension No data available
Gas group Not applicable.
Benzene Content No data available
Lead content Not applicable.
VOC (Volatile organic Not applicable.
compounds)

Water solubility
Miscible in water.

SECTION 10: Stability and reactivity

10.1. Reactivity
None expected under normal conditions of use.
10.2. Chemical stability
Will not decompose if stored and used as recommended.
10.3. Possibility of hazardous reactions
None expected under normal conditions of use.
10.4. Conditions to avoid
Do NOT allow to freeze. Direct sunlight. Heat, sparks and open flames.
10.5. Incompatible materials
Strong acids. Strong bases.
10.6. Hazardous decomposition products
Incomplete combustion will produce toxic and noxious fumes including carbon monoxide and
carbon dioxide.

SECTION 11: Toxicological information

11.1. Information on toxicological effects
Acute toxicity No data is available on this product.
Skin corrosion/irritation May cause irritation to skin.
Serious eye damage/irritation MAY CAUSE EYE IRRITATION.
Respiratory or skin No sensitizaton effects reported.
sensitisation
Repeated or prolonged Prolonged or repeated exposure may cause irritation to skin and mucous membranes.
exposure
11.1.4. Toxicological Information
No data available

SECTION 12: Ecological information

12.1. Toxicity
No data available
No data is available on this product.
12.2. Persistence and degradability
No data is available on this product.
12.3. Bioaccumulative potential

No data is available on this product.

Copyright © 2015 ChemSoft Limited. All rights reserved. Print date 2015-09-10
Powered by
 Page 6/7

KEMET DIAMOND COMPOUND 1 MICRON FLASH

Revision 4
Revision date 2015-06-18

Partition coefficient
KEMET DIAMOND COMPOUND No data available
1 MICRON FLASH

12.4. Mobility in soil

No data is available on this product.
12.5. Results of PBT and vPvB assessment
PBT/vPvB assessment is not available as a chemical safety assessment is either not required or
has not been conducted.
12.6. Other adverse effects
No known adverse environmental effects.

SECTION 13: Disposal considerations

13.1. Waste treatment methods
Allocation of the correct EWC Number should be done in accordance with the european Waste
Catalogue and should be carried out in agreement with an EA authorised waste disposal company.
General information
Can be incinerated if in compliance with local and national regulations. Dispose of in compliance
with all local and national regulations.
Disposal methods
Dispose of this material and its container to hazardous or special waste collection point.
Disposal of packaging
Empty containers can be sent to landfill after cleaning, if in compliance with local and national
regulations. Empty containers can be sent for disposal or recycling.

SECTION 14: Transport information

14.1. UN number
The product is not classified as dangerous for carriage.
14.2. UN proper shipping name
The product is not classified as dangerous for carriage.
14.3. Transport hazard class(es)
The product is not classified as dangerous for carriage.
14.4. Packing group
The product is not classified as dangerous for carriage.
14.5. Environmental hazards
The product is not classified as dangerous for carriage.
14.6. Special precautions for user
The product is not classified as dangerous for carriage.
14.7. Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
The product is not classified as dangerous for carriage.
Further information
The product is not classified as dangerous for carriage.

SECTION 15: Regulatory information

15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
Regulations COMMISSION REGULATION (EU) No 453/2010 of 20 May 2010 amending Regulation (EC) No

Copyright © 2015 ChemSoft Limited. All rights reserved. Print date 2015-09-10
Powered by
 Page 7/7

KEMET DIAMOND COMPOUND 1 MICRON FLASH

Revision 4
Revision date 2015-06-18

15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
1907/2006 of the European Parliament and of the Council on the Registration, Evaluation,
Authorisation and Restriction of Chemicals (REACH), establishing a European Chemicals Agency,
amending Directive 1999/45/EC and repealing Council Regulation (EEC) No 793/93 and
Commission Regulation (EC) No 1488/94 as well as Council Directive 76/769/EEC and
Commission Directives 91/155/EEC, 93/67/EEC, 93/105/EC and 2000/21/EC. REGULATION (EC)
No 1907/2006 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 18 December 2006
concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH),
establishing a European Chemicals Agency, amending Directive 1999/45/EC and repealing
Council Regulation (EEC) No 793/93 and Commission Regulation (EC) No 1488/94 as well as
Council Directive 76/769/EEC and Commission Directives 91/155/EEC, 93/67/EEC, 93/105/EC and
2000/21/EC. Regulation (EC) No 1907/2006 REACH, Regulation (EC) No 1272/2008 CLP. The
Health and Safety at Work Act 1974. Workplace Exposure Limits EH40.
15.2. Chemical safety assessment
A chemical safety assessment has not been conducted.

SECTION 16: Other information

Other information
Revision This document differs from the previous version in the following areas:.
2 - 2.1. Classification of the substance or mixture.
2 - 2.1.2. Classification - EC 1272/2008.
2 - Hazard pictograms.
2 - Precautionary Statement: Response.
2 - Precautionary Statement: Storage.
2 - Precautionary Statement: Disposal.
15 - Labelling.
15 - Risk phrases.
15 - Safety phrases.
Text of risk phrases in Section R34 - Causes burns.
3 R38 - Irritating to skin.
R41 - Risk of serious damage to eyes.
R65 - Harmful: may cause lung damage if swallowed.
R66 - Repeated exposure may cause skin dryness or cracking.
Text of Hazard Statements in Skin Irrit. 2: H315 - Causes skin irritation.
Section 3 Eye Dam. 1: H318 - Causes serious eye damage.
EUH066 - Repeated exposure may cause skin dryness or cracking.
Asp. Tox. 1: H304 - May be fatal if swallowed and enters airways.
Further information
The information supplied in this Safety Data Sheet is designed only as guidance for the safe use,
storage and handling of the product. This information is correct to the best of our knowledge and
belief at the date of publication however no guarantee is made to its accuracy. This information
relates only to the specific material designated and may not be valid for such material used in
combination with any other materials or in any other process.

Copyright © 2015 ChemSoft Limited. All rights reserved. Print date 2015-09-10
Powered by