DIRECTORATE OF VOCATIONAL EDUCATION & TRAINING, MUMBAI

REGIONAL OFFICE,
INDUSTRIAL TRAINING INSTITUTE ,
TRADE-ELECTRICIAN FIRST YEAR SKILL CHART YEAR -FIRST INST:-

soldering, crimping and measure insulation

(Learning outcome)

detection and repairing of domestic

maintenance of transformer.
analog / digital instruments
resistance of underground cable.

system and test.

and solar cell.

instruments.

appliances.
Apply safe working practices

system.
sr.no.

accuracy as per drawing.

Name of skills

magnetic circuits.
housekeeping
Pr No Professional Skills (Trade Practical) for week no. 1,2 2 3 to 7 8 to 12 13 to 26 27,28 29 to 35 36 37,38 39,40 41 42 to 44 45 to 47

Visit various sections of the institutes and location of electrical

1 installations. (01hrs.)
√
2 Identify safety symbols and hazards. (02Hrs.) √
Preventive measures for electrical accidents and electrical accidents
3 and such accidents. (03hrs.) √
4 Practice safe methods of fire fighting in case of electrical fire. (02hrs.) √
5 Use of fire extinguishers. (03Hrs.) √
6 Practice elementary first aid. (02hrs.) √ √
7 Rescue a person and practice artificial respiration. (01Hrs.) √ √
8 Disposal procedure of waste materials. (01Hrs.) √ √
9 Use of personal protective equipment. (01hrs.) √ √
10 Practice on cleanliness and procedure to maintain it. (02 hrs.) √ √
11 Identify trade tools and machineries. (03Hrs.) √
Practice safe methods of lifting and handling of tools & equipment.
12 (03Hrs.) √
13 Select proper tools for operation and precautions in operation. (03Hrs.) √
14 Care & maintenance of trade tools. (03Hrs.) √
15 Operations of allied trade tools. (05 Hrs.) √
16 Workshop practice on filing and hacksawing. (05Hrs.) √
17 Prepare terminations of cable ends (03 hrs.) √
18 Practice on skinning, twisting and crimping. (08 Hrs.) √
Identify various types of cables and measure conductor size using SWG and
19 micrometer. (06Hrs.) √
20 Make simple twist, married, Tee and western union joints. (15 Hrs.) √
21 Make britannia straight, britannia Tee and rat tail joints. (15Hrs.) √
22 Practice in Soldering of joints / lugs. (12 Hrs.) √
23 Identify various parts, skinning and dressing of underground cable. (10Hrs.) √
24 Make straight joint of different types of underground cable. (10Hrs.) √
25 Test insulation resistance of underground cable using megger. (06 hrs.) √
26 Test underground cables for faults and remove the fault. (10Hrs.) √
Practice on measurement of parameters in combinational electrical circuit by
27 applying Ohm’s Law for different resistor values and voltage sources and √
analyse by drawing graphs. (08 Hrs.)
Measure current and voltage in electrical circuits to verify Kirchhoff’s Law
28 (08Hrs.) √
29 Verify laws of series and electrical fire. (02hrs.) √
Measure voltage and current against individual resistance in electrical circuit
30 (05hrs.) √
Measure current and voltage and analyse the effects of shorts and opens in
31 series circuit. (05 Hrs.) √
Measure current and voltage and analyse the effects of shorts and opens in
32 parallel circuit.(05 Hrs.) √
33 Measure resistance using voltage drop method.(03Hrs.) √
34 Measure resistance using wheatstone bridge. (02 Hrs.) √
35 Determine the thermal effect of electric current. (03Hrs.) √
36 Determine the change in resistance due to temperature. (02Hrs.) √
37 Verify the characteristics of series parallel combination of resistors. (03Hrs.) √
38 Determine the poles and plot the field of a magnet bar.(05Hrs.) √
39 Wind a solenoid and determine the magnetic effect of electric current. (05Hrs.) √
40 Determine direction of induced emf and current.(03hrs.) √
41 Practice on generation of mutually induced emf.(03hrs.) √
Measure the resistance,impedance and determine inductance of choke coils in
42 different combinations.(05Hrs.) √
Identify various types of capacitors, charging / discharging and testing.
43 (05Hrs.) √
Group the given capacitorsto get the required capacity and voltage rating. (05
44 Hrs.) √
Measure current, voltage and PF and determine the characteristics of RL, RC
45 and RLC in AC series circuits. (06Hrs.) √
Measure the resonance frequency in AC series circuit and determine its effect
46 on the circuit. (05hrs.) √
Measure current, voltage and PF and determine the characteristics of RL, RC
47 and RLC in AC parallel circuits. (06Hrs.) √
Measure the resonance frequency in AC parallel circuit and determine its
48 effects on the circuit. (05hrs.) √
Measure power, and energy for lagging and leading power factors in single
49 phase circuits and compare characteristics graphically. (06Hrs.) √
Measure Current, voltage, power, energy and power factor three-phase has
50 circuits. (05hrs.) √
 Practice improvement of PF by use of capacitor in three-phase
51 circuit.(03Hrs.) √
Ascertain use of neutral by identifying wires of a 3- phase 4 wire system and
52 find the phase sequence using phase sequence meter. (07Hrs.) √
Determine effect of broken neutral wire in three phase four wire
53 system.(04hrs.) √
Determine the relationship between Line and Phase values for star and delta
54 connections. (07Hrs.) √
Measure the Power of three phase circuit for balanced and unbalanced loads.
55 (10Hrs.) √
Measure current and voltage of two phases in case of one phase is short-
56 circuited in three phase four wire system and compare with healthy system. √
(07hrs.)
57 Use of various types of cells. (08 Hrs.) √
Practice on grouping of cells for specified voltage and current under different
58 conditions and care. (12 Hrs.) √
Prepare and practice on battery charging and details of charging circuit. (12
59 Hrs.) √
60 Practice on routine, care/ maintenance and testing of batteries. (08 Hrs.) √
Determine the number of solar cells in series / parallel for given power
61 requirement. (10 Hrs.) √
62 Identify various conduits and different electrical accessories. (8 Hrs.) √
63 Practice cutting, threading of different sizes & laying Installations. (17 Hrs.) √
Prepare test boards / extension boards and mount accessories like lamp
64 holders, various switches, sockets, fuses, relays, MCB, ELCB, MCCB etc.(25 Hrs.) √
Draw layouts and practice in PVC Casing-capping, Conduit wiring with
65 minimum to more number of points of minimum 15 mtr length. (15 Hrs.) √
Wire up PVC conduit wiring to control one lamp from two different places.
66 (15 Hrs.) √
Wire up PVC conduit wiring to control one lamp from three different places.
67 (15 Hrs.) √
Wire up PVC conduit wiring and practice control of sockets and lamps in
68 different combinations using switching concepts.(15 Hrs.) √
Wire up the consumers main board with MCB & DB’s switch and
69 distribution fuse box.(15 Hrs.) √
70 Prepare and mount the energy meter board. (15 Hrs.) √
Estimate the cost/bill of material for wiring of hostel/ residential building and
71 workshop.(15 Hrs) √
72 Practice wiring of hostel and residential building as per IE rules. (15 Hrs.) √
73 Practice wiring of institute and workshop as per IE rules.(15 Hrs) √
Practice testing / fault detection of domestic and industrial wiring installation
74 and repair. (15Hrs.) √
Prepare pipe earthing and measure earth resistance by earth tester / megger.
75 (10 Hrs.) √
Prepare plate earthing and measure earth resistance by earth tester / megger.
76 (10 Hrs.) √
77 Test earth leakage by ELCB and relay. (5 Hrs.) √
78 Install light fitting with reflectors for direct and indirect lighting. (10 Hrs.) √
79 Group different wattage of lamps in series for specified voltage. (5 Hrs.) √
Practice installation of various lamps e.g. fluorescent tube, HP mercury
80 vapour, LP mercury vapour, HP sodium vapour, LP sodium vapour, metal
halide etc. (18 Hrs.) √
Prepare decorative lamp circuit to produce rotating light effect/running light
81 effect.(6 Hrs) √
82 Install light fitting for show case lighting. (6 Hrs.) √
83 Practice on various analog and digital measuring Instruments. (5 Hrs.) √
Practice on measuring instruments in single and three phase circuits e.g.
84 multi-meter, Wattmeter, Energy meter, Phase sequence meter and Frequency
meter etc. (12Hrs.) √
85 Measure power in three phase circuit using two wattmeter methods. (8 Hrs.) √
Measure power factor in three phase circuit by using power factor meter and
86 verify the same with voltmeter, ammeter and wattmeter readings. (10Hrs.) √
Measure electrical parameters using tong tester in three phase circuits.
87 (08Hrs.) √
Demonstrate Smart Meter, its physical components and Communication
88 components. (03 Hrs.) √
89 Perform meter readings, install and diagnose smart meters. (04 Hrs.) √
Practice for range extension and calibration of various measuring
90 instruments. (10 Hrs.) √
91 Determine errors in resistance measurement by voltage drop method. (8 Hrs.) √
92 Test single phase energy meter for its errors. (7 Hrs.) √
Dismantle and assemble electrical parts of various electrical appliances e.g.
93 cooking range, geyser, washing machine and pump set. (25 Hrs.) √
Service and repair of electric iron,electric kettle, cooking range and geyser.
94 (12 Hrs.) √
95 Service and repair of induction heater and oven. (10 Hrs.) √
96 Service and repair of mixer and grinder.(10Hrs.) √
97 Service and repair of washing machine. (13Hrs.) √
Verify terminals, identify components and calculate transformation ratio of
98 single-phasetransformers. (8 Hrs.) √
Perform OC and SC test to determine and efficiency of single-phase
99 transformer. (12Hrs.) √
Determine voltage regulation of single-phase transformer at different loads
100 and power factors (12 Hrs.) √
Perform series and parallel operation of two single phase transformers. (12
101 Hrs.) √
Verify the terminals and accessories of three phase transformer HT and LT
102 side. (6Hrs.) √
Perform3phase operation (i) delta-delta, (ii) delta-star, (iii) star-star, (iv) star-
103 delta by use of three single phase transformers. (6 Hrs.) √
104 Perform testing of transformer oil. (6 Hrs.) √
105 Practice on winding of small transformer. (8 Hrs.) √
106 Practice of general maintenance of transformer. (5 Hrs.) √