® Model Kit POL807

TM
ENTERPRISE™ NX-01
all plastic assembly snap-together model kit

E
C
A
H NACELLE - STARBOARD
Assemble starboard nacelle as shown.
When assembly is complete, snap into
In the 22nd Century... A place on support pylons as indicated.
Captain Jonathan Archer is assigned SAUCER - UPPER
command of the Enterprise NX-01, the first
long-term manned Starfleet vessel, and the
first in a long line of legendary starships Assemble upper half of saucer
bearing the name, “Enterprise.” Captain section as shown, snapping
DISPLAY BASE
Archer and his team of space explorers parts into place as indicated.
represent humanity’s first bold step beyond A Assemble as shown. Place completed
Earth’s solar system.
starship in place, matching the pins at ends
A
Polar Lights presents the Enterprise NX-01 of clear rods to the holes in lower saucer.
Snap Together Model Kit. With more than A
35 highly-detailed pieces, this is an
exacting replica of the NX-01 as seen in B B
Star Trek: Enterprise.
Choose the ship you wish to build, then
follow the placement diagram working SAUCER - LOWER
systematically to place each element as
shown. The decals provided allow options to Assemble lower half of saucer
build either the Starship Enterprise NX-01 or
section as shown, snapping parts
the Columbia NX-02.
into place as indicated.
PAINTING SUGGESTIONS
When building the Columbia A
It is not necessary to paint this model kit to NX-02, use the optional deflector
complete it. If the desired effect is to add a C
dish B (parts 29 and 30) shown
more realistic and detailed look, below are H
some suggestions for adding a few touches of below.
paint. Most exterior painting should be done Carefully snap upper saucer NACELLE - PORT
AFTER sub-assemblies are completed. Mask assembly into place on lower
the windows and clear parts BEFORE Assemble port nacelle as shown. When
saucer assembly.
painting. Paint colors listed are from the assembly is complete, snap into place on
Testors line of hobby paints.
support pylons as indicated.

Name Testors No.#

A Clear Blue . . . . . . . . . . 4658
B Clear Red . . . . . . . . . . 4630
C Clear Green . . . . . . . . 4688 A
Deflector Dish A
D Metallic Copper . . . . . 4405
A
E Titanium . . . . . . . . . . . 1404
A
F Silver. . . . . . . . . . . . . . 4678
G Aluminum . . . . . . . . . 4408
H Gun Metal . . . . . . . . . 1795
I Steel . . . . . . . . . . . . . . 1780 B
J Cobalt Blue . . . . . . . . 2012 Option -
Deflector Dish B A
K Bright Red . . . . . . . . . .1312
B
L Flat Black . . . . . . . . . . 1749

POLAR LIGHTS is a registered trademark of Learning Curve Brands, Inc.

used under license to Round 2, LLC. ©2008 Learning Curve Brands, Inc.
All rights reserved. , ® & © 2008 CBS Studios Inc. All rights reserved.
STAR TREK and related marks are trademarks of CBS Studios Inc.
© 2008 Round 2, LLC, South Bend, IN 46628 USA. Product and packaging
designed in the USA. Made in China. All rights reserved.
 ® Model Kit POL807

TM
ENTERPRISE™ NX-01
all plastic assembly snap-together model kit

4
DECAL PLACEMENT
1. Wash plastic parts in mild 2 2A
detergent solution, rinse and let
dry. Paint parts, let dry.
11
2. Cut the desired decal from sheet. 7 8
4 7
3. Dip decal in clear water for a
second. 2 14
4. Place wet decal on paper towel.
5. Wait until decal is movable on
paper backing.
6. Place decal in position on model,
face up and slide backing away.
7. Press out air bubbles with a soft
damp cloth.
8. Do not touch decals until fully dry.

These decals are compatible with 13

setting solutions. Use with caution
when applying setting solution.

6
5A 5B

5 12
1 1A
15 7
9 4 13

10
4
7

2 2A